Užimtumo medžiaga Briketavimo presas

mütek MAP 750

Used, in good condition.
Technically inspected pre-owned machine

Base machine starting from: €139,750 net
*Options available at extra cost, see below
Delivery time approx. 16 weeks after order

Briquetting press suitable, for example, for wood dust, spelt husks, enrichment material (e.g. for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optionally, short briquette tablets can be produced

Technical data:
Throughput capacity up to max. 750 kg/h (material-dependent)
(e.g. sawdust with a bulk density of 250 kg/m³)
A precise statement regarding throughput performance is only possible after testing your material. Throughput can vary greatly depending on the bulk density of the input material.

Commodity code: 84793010
Briquette Ø 65 mm
Including 2 m press channel
Main drive motor power 37 kW
Feed auger with geared motor 2.2 kW
Compactor auger 5.5 kW
Hydraulic pump motor 0.37 kW
Total connected load: approx. 47 kW
Control panel with plain text display for machine status and load display for main drive and feed augers
PLC control with operating hours counter in control cabinet
Machine carries CE marking
Automatic start-stop function
Dimensions 3100x860x1800 mm (LxWxH)
Weight: 3,800 kg

Options at extra cost:
Bcsdpfxjfmqq Es Agisw

Temperature control unit for pressing tools
For maintaining an optimal temperature to ensure briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch
Ready for connection – required for operation
Including corresponding control system + €7,850 net

Guillotine or tablet crusher
For cutting briquettes to size + €6,900 net
Compressed air connection required!

Silo for MAP series + €19,940 net
- Buffer silo above the machine -
Volume approx. 6 m³, sturdy steel structure with agitator discharge and fill-level sensor.

Transport piping / cooling section (nominal: 4x2m)
Price per 2 meters: €990 net

Assembly / commissioning (estimated 2-3 days on site)
Billed according to actual time and documented separately. The following rates apply:
Service technician/mechatronics engineer per assembly and travel hour: €129.00
Overtime: 25% surcharge
Each Saturday and night hour: 50% surcharge
Each Sunday and public holiday hour: 100% surcharge
Daily allowance per technician: country-specific
Per car/transporter kilometer: €0.98/km
Travel and accommodation at actual cost or by flat rate charged to the client.

Testing with customer-specific material (by arrangement, up to max. 750 kg) – €1,970 net flat rate

Requirements for feedstock:
- Moisture content (bone dry) must be between at least 6% and max. 15%
- Maximum chip length 18 mm
- Installation temperature: heated room at least +5°C
- The feed must be free from metals and mineral impurities. Damage to the pressing tools and/or increased wear may otherwise result.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.