Mütek Map 750 pirkti naudotą (4 927)

Būklė: geras (naudotas), Used, in good condition. Technically inspected pre-owned machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press suitable, for example, for wood dust, spelt husks, enrichment material (e.g. for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optionally, short briquette tablets can be produced Technical data: Throughput capacity up to max. 750 kg/h (material-dependent) (e.g. sawdust with a bulk density of 250 kg/m³) A precise statement regarding throughput performance is only possible after testing your material. Throughput can vary greatly depending on the bulk density of the input material. Commodity code: 84793010 Briquette Ø 65 mm Including 2 m press channel Main drive motor power 37 kW Feed auger with geared motor 2.2 kW Compactor auger 5.5 kW Hydraulic pump motor 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for machine status and load display for main drive and feed augers PLC control with operating hours counter in control cabinet Machine carries CE marking Automatic start-stop function Dimensions 3100x860x1800 mm (LxWxH) Weight: 3,800 kg Options at extra cost: Temperature control unit for pressing tools For maintaining an optimal temperature to ensure briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch Ready for connection – required for operation Including corresponding control system + €7,850 net Guillotine or tablet crusher For cutting briquettes to size + €6,900 net Compressed air connection required! Silo for MAP series + €19,940 net - Buffer silo above the machine - Volume approx. 6 m³, sturdy steel structure with agitator discharge and fill-level sensor. Transport piping / cooling section (nominal: 4x2m) Price per 2 meters: €990 net Assembly / commissioning (estimated 2-3 days on site) Billed according to actual time and documented separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Djdpofmqq Esfx Aaiokr Each Saturday and night hour: 50% surcharge Each Sunday and public holiday hour: 100% surcharge Daily allowance per technician: country-specific Per car/transporter kilometer: €0.98/km Travel and accommodation at actual cost or by flat rate charged to the client. Testing with customer-specific material (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for feedstock: - Moisture content (bone dry) must be between at least 6% and max. 15% - Maximum chip length 18 mm - Installation temperature: heated room at least +5°C - The feed must be free from metals and mineral impurities. Damage to the pressing tools and/or increased wear may otherwise result.

Būklė: geras (naudotas), Refurbished Used Machine *Options available at extra cost, see below with full 1-year warranty Available for delivery approx. 16 weeks after order Technical Specifications: Throughput capacity up to max. 1200 kg/h depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter 75 mm including 2 m press channel Main drive motor 45 kW Feed screw geared motor 2 x 2.2 kW Compactor screw 2 x 5.5 kW Distributor screw 2.2 kW Hydraulic pump motor 0.37 kW Total connected load 65 kW Control panel with plain text display for operational states and load indicator for main drive and feed screws PLC control Siemens S7/300 with hour meter in the control cabinet Dedpfx Ao E Dqueaiekr Machine has CE marking Automatic start/stop function Dimensions: 3100 x 860 x 1800 mm (L x W x H) Weight: 4500 kg Options: Silo for MAP series (only suitable for one press of type MAP 1200) - Buffer silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor. €19,700 net plus VAT - Temperature control unit for press tools For maintaining temperature to achieve optimal briquette quality. Temperature control for pump, cooler, fan, pressostat Ready-wired for operation – mandatory for use including corresponding control system €7,850 net - Guillotine for briquette length cutting Compressed air connection required on site €6,940 net plus VAT - Conveyor line / cooling section (Nominal value: 4x2m) per 2 meters €990 net Assembly / Commissioning (Nominal value per press approx. 2-3 days on site) Charged according to effort based on evidence, invoiced separately. The following rates apply: Service technician/mechatronics technician per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday and night hour: 50% surcharge Each Sunday and public holiday hour: 100% surcharge Per diem allowance per fitter per day: depending on country Per car/van and travel kilometer: €0.98 / km Arrival and accommodation expenses reimbursed by invoice or by fixed rate at the buyer's expense. Test with customer's own material: (by arrangement, up to max. 750 kg) – flat rate €1,970 net ---- Raw material requirements: - The (absolute dry) moisture content must be between a minimum of 6 and a maximum of 18% - Maximum chip length 20 mm - Installation temperature: climate-controlled room, minimum +5°C - Feedstock must be free of metals and mineral contaminants. Damage to the press tools and/or increased wear may otherwise occur.

Gamybos metai: 2016, būklė: paruoštas naudoti (naudotas), Šis MAPLAN MFT 750/160 edition S pagamintas 2016 m. Tai vertikalioji liejimo mašina, idealiai tinkanti preciziškam plastiko apdirbimui. Susisiekite su mumis dėl išsamesnės informacijos. Mašinos privalumai Techninės mašinos privalumai • Prijungta apkrova: 84 kw • Nominali įtampa: 3 x 400 v • Valdymo įtampa: 24 v • Saugus atstumas: 310 mm • Viršijimo laikas: 128 ms • Viršvalandžio eiga: 62,3 mm • Maksimalus platformos aukštis: 750 mm Dodpfxjx U Tihe Aaiskr • Platformos matmenys: 1850 x 1300 mm • Sistemos yra visiškai funkcionalios ir buvo naudojamos 2/3 pamainomis nuo 2017 iki 2022 m. • Purškimo cilindrai buvo vėl užsandarinti, o izoliacinės plokštės pakeistos 2023 m. Papildoma informacija Mašina vis dar įjungta

Būklė: naudotas, Gamybos metai: 2010, X eiga 500 mm y eiga 700 mm z eiga 500 mm A ašis 240 (-120/+120) ° C ašis 360 ° Valdymas Siemens 840 D Plokštės skersmuo 440 mm T formos griovelių plotis 14 mm T formos griovelių atstumas 75 mm Maks. stalo apkrova 400 kg Maks. sukimosi greitis 20 000 min⁻¹ Djdpfx Aajxq R E Noiokr Įrankio tvirtinimas HSK 63 A Maks. įrankio ilgis 330 mm Įrankio skersmuo 125 mm Įrankių keitimo laikas (nuo drožlės iki drožlės) 4,5 sek. Mašinos svoris apie 10,5 t Užimamas plotas apie 2,5 x 5,2 x 3,5 m Mūsų vertinimu, šios mašinos yra geros naudotos būklės ir gali būti apžiūrėtos prijungtos prie elektros pagal susitarimą. Priedai: - Kuka robotas KR200-3 comp Yra 3 vienodos mašinos. Priedai, parodyti įrankiai ir spaustuvai įtraukiami tik tuo atveju, jei tai aiškiai nurodyta papildomoje informacijoje. Techninių duomenų ir informacijos pakeitimai bei klaidos galimos, taip pat tarp pardavimas!

Būklė: naujas, Gamybos metai: 2026, veikimo valandos: 8 h, Dar viena mašina – iškart prieinama! Labai tvirta mašina su didele spaudimo galia – tinkama gaminti net ir parduodamos kokybės briketus (priklausomai nuo žaliavos). Didelės apimties spaudimo cilindras ir 80 mm briketai tai leidžia. Mūsų perkamiausia briketavimo presų serija: + Patikrinta, paprasta technologija, užtikrinanti itin mažą gedimų tikimybę + 25 metų patirtis, nuolatinis tobulinimas ir žinios + Tūkstančiai naudojamų mašinų patenkintiems klientams + Puikus kainos ir kokybės santykis Papildoma kaina už aušinimo įrenginį: +4 995 € (be PVM), (galima sumontuoti ir vėliau) * Aušina presavimo žnyples ir hidraulinę alyvą (rekomenduojama, jei presas veikia ilgiau nei apie 3,5 valandos be pertraukos) Briketo skersmuo: 80 mm Priekinė įvorė: 125 mm Didžiausias briketo eiga: 100 mm Optimali briketo eiga: 80 mm Našumas (priklauso nuo žaliavos): iki 200 kg/val.* *priklauso nuo birumo tankio *skaičiuota pagal 200 kg/kub.m birumo tankį Variklio galia: 9,2 kW 400 V / 50 Hz / 3 fazės Ilgis: 2095 mm Plotis: 1600 mm Aukštis: 1700 mm Svoris: 1250 kg Alyvos kiekis: 220 l Dsdsxfwdepfx Aaiekr Siloso skersmuo: 1200 mm Siloso talpa: apie 1 m³ Siurblys: 75 l Hidraulinis išankstinis suslėgėjas Presavimo žnyplių aušinimas: taip, su papildoma aušinama presavimo žnyple Hidraulinės alyvos aušinimas: taip Presavimo žnyplių ir hidraulinės alyvos aušinimas su aušinimo įrenginiu (papildoma įranga) Pilnumo lygio kontrolės galimybė: taip Ištisinis briketas: taip (priklauso nuo žaliavos) Galimybė didesniam užpildymo slankikliui: taip, su papildoma įranga Atitinka CE reikalavimus Reikalavimai žaliavai: - Drėgmė turi būti nuo 6 iki maks. 15% - Kūdros ilgis ne didesnis kaip 20 mm - Darbo temperatūra: šildoma aplinka, ne mažiau kaip +5°C - Tiekiama žaliava turi būti be metalo ir mineralinių priemaišų, tokių kaip smėlis, akmenys ir pan. Priešingu atveju gali atsirasti presavimo įrankių pažeidimų ir/ar padidėti nusidėvėjimas.

Būklė: naujas, Gamybos metai: 2026, Sudėtis: Didelių rulonų skaidytuvas MHB tipo ir šiaudų smulkintuvas MHZ tipo 1) Rulonų skaidytuvas MHB: Speciali kaina nuo 24.975 € be PVM (gamybos laikas apie 15 savaičių) Tinka apvaliems arba kvadratiniams rulonams. Įskaitant dažnio keitiklį (FU) – jis reguliuoja grandinės dugno greitį. Rulonai dedami ant grandinės dugno ir įjungiamas frezos tiekimas. Frezos dantys nuplėšia šiaudus nuo rulono ir išmeta juos į bunkerį. Idealiai rekomenduojama derinti rulonų skaidytuvą su šiaudų smulkintuvu. Techniniai duomenys, rulonų skaidytuvas: Našumas: 1–2 rulonai per valandą iki 600 kg per valandą (priklausomai nuo montuojamo sieto dydžio šiaudų malūne, šiaudų malūno kW galios). Be šiaudų malūno rulonų skaidytuvas gali iki 900 kg/val. šiaudų išskaidyti. Didžiausias kvadratinių rulonų dydis: 2400x1200x800 mm (ilgis x plotis x aukštis) Frezos variklis: 5,5 KW, 380 V Grandinės dugno pavara: 0,75 KW, 380 V Išmatavimai: 3750x1730x2460 mm (ilgis x plotis x aukštis) Svoris: 400 kg 2) Šiaudų smulkintuvas MHZ 600 – 11/15 kW; iškart prieinamas Speciali kaina nuo 6.995 € be PVM Papildomai, didesnis šiaudų smulkintuvas (18,5 kW) + 2.750 € be PVM. Techniniai duomenys, MHZ su specialiu bunkeriu: Variklis: 15 kW, 380 V elektros variklis Skersmuo: 600 mm Grūdinti peiliai Sietas su keičiama įranga (10, 12, 15, 22, 30, 45 mm skylės) Su „žvaigždė-trikampis“ jungikliu, nuo perkrovos apsauga ir 8 m prijungimo kabeliu su kištuku Išpūtimo anga: 160 mm Išpūtimo atstumas apie 12 m Matmenys apie 1600 x 1020 x 1360 mm (ilgis x plotis x aukštis) Svoris apie 240 kg --- Papildomos pasirenkamos įrangos kainos: Įtraukimo sraigtas + 970 € be PVM Ciklonas (pakabinimas – sumontuoja klientas) *turi būti ne daugiau kaip 10 m atstumu + 2.970 € be PVM Paprastas filtras: 1.750 € be PVM --- Kitos galimybės: Pramoninė dulkių nusiurbimo sistema (demo versija) + nuo 9.950 € be PVM Papildomai su kamščių vožtuvu (slėgio sumažinimui) + 5.750 € be PVM Valdymo sistema: nuo 1.620 € be PVM Specifinis skaidytuvo prailginimas 3 m (*kiti matmenys pagal atskirą skaičiavimą) + 9.750 € be PVM Briketavimo presas MPP 180 S; mažai naudotas demonstracinis įrenginys 70 mm briketai – iki 100 kg/val. nuo 39.700 € be PVM * Didesni įrenginiai pagal užklausą --- Aprašymas: muetek rulonų skaidytuvas sukurtas šienui ir šiaudams skaidyti iš apvalių ir kvadratinių rulonų. Prie rulonų skaidytuvo prijungtas smulkintuvas smulkina šiaudus iš visų javų rūšių, šieną, kukurūzus ir miskantą. muetek MHZ/MHB serijos mašinos išsiskiria tvirta konstrukcija ir masyviu korpusu. muetek MHB serijos rulonų skaidytuvai turi grandinės konvejerį, ant kurio rulonas patalpinamas krovimo frontloderiu. Paviršiaus padėtis reguliuojama pagal rulono tipą. Grandinės konvejeris stumia ruloną į frezos rotorių, tiekimo greitis reguliuojamas. Frezos rotorius turi kelis dantis, kurie suplėšo šiaudų ruloną. Nuo rulono atskirtas šiaudas išmetamas. --- Iš esmės mašinos veiksmingos su sausomis žaliavomis: - Šiaudai Dodeb Nulhjpfx Aaiekr - Šienas --- Kanapių skaidymui reikalingas specialus skaidytuvas. Papildoma kaina apie 9.720 € be PVM, priklausomai nuo specifikacijos. Kanapių smulkinimas šiaudų malūnu neveikia. Žaliavos drėgnumas: maksimaliai 12 %

Būklė: beveik kaip naujas (parodų įrenginys), Demonstracinis modelis, naudotas 7 valandas. Prieinamas iš karto (iš gamyklos Neckartailfingene). Šiukšlinimo įrenginys MRZ 830 Prekės kodas: 84659600 Pagaminimo metai: 2023 Įleidimo anga: 800 x 1000 mm Variklis: 22 kW; 400 V - 50 Hz - 3 fazės Peiliai: daugybę kartų pasukami Hidrauliniu būdu valdomas stūmoklis Sieto skylės pagal pasirinkimą (10–40 mm) Svoris: apie 1600 kg Matmenys (ilgis x plotis x aukštis): apie 2290 x 1420 x 1750 mm Turbininė sankaba Standartinė komplektacija: - automatinis žvaigždės/trikampio paleidimas - greita hidraulika - automatinis išjungimas, kai rotorius neveikia - 70–90 aps./min. greitis, užtikrinantis didelį našumą - ciklinis valdymas, skirtas išvengti neveikimo laikotarpių - našumą didinanti hidraulinio stūmoklio žingsninė kontrolė - „Pertinax“ kreiptuvai hidrauliniam stūmokliui - vibraciją slopinančios mašinos kojelės - CE sertifikatas Šis smulkintuvas skirtas natūralios medienos, gipso kartono ir MDF plokščių bei kitų medžiagų smulkinimui, po to, kai gamintojas jas išbandys ir patvirtins. Įskaičiuota: - smulkintuvo pakėlimas 30 cm (paruošimas konvejerio juostai) Papildomos smulkintuvo funkcijos: Dedov Sqrpopfx Aaijkr - lenkta konvejerio juosta + 8770 EUR (be PVM) Horizontalioji dalis: 1200 mm Pakylioji dalis: 2500 mm Kampas: reguliuojamas nuo 0 iki 60 laipsnių Išleidimo aukštis: apie 2000 mm + - 100 mm - magnetinis atskyriklis + 6780 EUR (be PVM) - konvejerio juostos ir magnetinio atskyriklio valdymas + 2750 EUR (be PVM) (paleidimas ir sustabdymas sinchronizuojami su smulkintuvu) Žaliavos reikalavimai: - drėgmės kiekis (atro) turi būti mažesnis nei 30 % - metalai ir mineralinės priemaišos, tokios kaip smėlis, akmenys ir kt., sukelia didesnį nusidėvėjimą

Būklė: naujas, Gamybos metai: 2026, Production time approx. +/- 4 months The optimal machine for shredding, e.g., pallets and wood residues. * Prepared for extraction, see pictures 4 and 5 without additional accessories such as display hopper or conveyor belt cut-out Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph with turbo coupling included Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knives: 76 pieces, reversible multiple times Knife dimensions: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Djded Hkqhopfx Aaiskr Hopper volume approx. 2.5 m³ Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard features include: - V-rotor for maximum throughput - 2nd knife row on rotor - Control cabinet with Siemens PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when the rotor is idle - Speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF panels, and other materials subject to testing and approval by the manufacturer. Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 700 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 500 mm, veleno greitis (maks.): 18 000 aps./min, Nėra minimalios kainos – garantuotas pardavimas didžiausią pasiūlymą pateikusiam! TECHNINĖ INFORMACIJA X ašies eiga: 700 mm Y ašies eiga: 1 000 mm Z ašies eiga: 500 mm Veleno apsisukimų greitis: 1 – 18 000 aps./min. Įrankio tvirtinimas: HSK-A63 Įrankių magazino vietų skaičius: 70 Įrankio įrankio keitimo laikas: 2,5 s Pagreitis: 20 m/s² Judėjimo greitis: 120 m/min STAKLIŲ DUOMENYS Padėklų skaičius: 6 Dedpfszd R R Esx Aaiokr KOMPLEKTACIJA Integruota gaminio keitimo sistema Aukšto dinamiškumo 5 ašių apdirbimas Svorio atžvilgiu optimizuota kinematika Linijiniai pavaros varikliai

Būklė: beveik kaip naujas (parodų įrenginys), We offer here a second-choice column guard from the manufacturer SSI Schäfer for purchase. The scope of delivery includes: 01x Column Guard, second-choice Material color: yellow Design: V-shape Total height: approx. 750 mm Total width: approx. 124 mm Internal width: approx. 116 mm Total depth: approx. 65 mm Leg dimensions: approx. 65 x 65 mm Material thickness: approx. 4 mm Pitch/hole spacing: approx. 300 mm Dodshr U Tropfx Aaiekr Number of holes: 06 pcs. (03 pcs. per side) Hole Ø: approx. 9 mm 06x Hexagon screw: M8 x 35 mm 06x Serrated nut: M8 06x Washer: M8 General information about the item: This item is offered for collection only. Any additional transport or shipping of this item is subject to additional costs, which can be inquired separately depending on the place of delivery and scope of delivery.

Būklė: labai geros būklės (naudotas), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Post protector, used Material colour: yellow Design: V-shaped Total height: approx. 750 mm Total width: approx. 100 mm Internal width: approx. 93 mm Total depth: approx. 60 mm Material thickness: approx. 3.50 mm Grid/hole spacing: approx. 300 mm Number of holes: 06 pcs. (03 pcs. per side) Hole diameter: approx. 11 mm 06x Hexagon bolt: M8 x 35 mm 06x Lock nut: M8 06x Washer: M8 General information about the item: This item is offered for collection only. Any transport or shipping of this item beyond this is subject to additional charges, which can be requested from us separately depending on the place of delivery and scope of delivery. Overview of our services: (Prices on request) Assembly, installation Our general assembly conditions apply Racking inspection Racking inspection according to DIN EN 15635, executed as per the requirements of BGR 234 visual inspection for all racking systems Dkjdpfx Aoh Ei Udsaier Delivery with our own fleet (without unloading)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Batch Mixer Type WBX 1100 - 1 control unit for the mixer with frequency converter - 1 cutter head, 5.5 kW - 1 manual shut-off valve - 1 separate control panel ("remote control") - Maximum usable volume: 770 liters - Mixing product: plastic granulate - Bulk density: approximately 0.7–0.8 kg/litre - Product properties: free-flowing - Mixing time: less than 3 minutes Dkjdpjza Ap Tjfx Aaisr MACHINE DESCRIPTION Mixing Drum: - Horizontal, cylindrical mixing drum - End walls bolted to the drum Mixing Tool: - Mixing tools as ploughshares or inclined paddles, bolted via paddle arms into pockets Bearing: - Shaft mounted in flange bearing housings with roller bearings outside the mixer Sealing: - Shaft sealing with easily replaceable stuffing box packings, packing flushed with air Feeding: - 2 nozzles with flange, as per dimension sheet Ventilation: - Via 1 nozzle with flange, as per dimension sheet with filter bag incl. bracket and welded-in protective grid Discharge: - By dead-space-free closing flap, pneumatically actuated - 1 discharge nozzle with flange, as per dimension sheet Liquid Addition: - None Inspection and Cleaning: - Via 1 door at the front of the drum (1700 x 550 mm) - Door closed with quick-release fastener - Occupational and accident safety via safety locking magnet and limit switch (not wired) Materials: - Mixing drum made of stainless steel 1.4306 - Mixer shaft made of stainless steel 1.4306 - Mixing tools made of stainless steel 1.4306 Subject to prior sale. Please send inquiries by email only. Note: The machine is in storage and can be inspected on site. Shipping must be organized by the buyer. Shipping is not included in the offered price.

Gamybos metai: 2013, būklė: beveik kaip naujas (naudotas), This ploughshare mixer / inclined blade mixer is a customer return with zero operating hours. Before delivery, the mixer will be reconditioned in the workshop. Dkodpfxen Ur S Uo Aaier Machine designation: Ploughshare Mixer / Inclined Blade Mixer Manufacturer: MAP Model: WBHP 15000 Year of manufacture: 2013 Operating hours: Zero Material: Standard steel S235J Drive motor: Choice between 160 kW, 200 kW, and 250 kW Description: Single-shaft horizontal mixer Design: Batch mixer Usable volume: 4,500 - 10,500 liters Tool configuration: Ploughshares (bolted) Dimensions: L 6,124 mm x W 2,800 mm x H 2,525 mm Dead weight: 8,000 kg Technical documentation: Yes Note: As the tools are bolted, the machine can be used both as a ploughshare mixer and as an inclined blade mixer. This horizontal mixer is a customer return with zero operating hours. Prior to delivery, it will be reconditioned in the workshop. Condition: New and workshop reconditioned Price: On request

Būklė: naujas, Gamybos metai: 2026, Our best-selling briquetting press – the classic. + Proven and simple technology for extremely high reliability + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras at additional cost: * Surcharge for level sensor enabling automatic operation + €995 net * Surcharge for large pre-compression chamber + €970 (recommended for very light material such as straw; machine will be 13 cm wider) Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Opt. briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Press jaws cooling option: no Djdpfsgl Nlmox Aaijkr Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant Requirements for raw material: - The moisture content (a.d.) must be at least 6% up to a maximum of 18% - Maximum chip length is 15 mm - Installation temperature: heated room with at least +5°C - Customer must ensure hydraulic oil retention - Feedstock must be free from metals and mineral contaminations such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Special Price: €29,970 net One machine is available immediately. This is the ideal machine for shredding voluminous, lightweight aluminium chips or turnings. Not suitable for more solid aluminium parts. Included: + Optimized cutting geometry + Adapted pusher control Dodpfx Aajgmh H Tjijkr + Load-dependent hydraulic pusher (which presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 40x40mm, multiple cutting edges (reversible), Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 m³, Hydraulically operated pusher Screen perforation selectable (15 - 40mm) Extraction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Shredder raised by 30 cm (preparation for conveyor belt) +€2,990 net - Angle conveyor (discharge height approx. 220 cm) +€9,770 net - Overband magnet +€6,980 net - Control system for conveyor and overband magnet +€2,750 net (start and stop synchronized with shredder) We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Būklė: naujas, Gamybos metai: 2026, Availability upon arrangement Very robust machine with high pressing force - Also suitable for producing saleable briquette quality *depending on material. The large-dimensioned pressing cylinder and 70 mm briquette diameter make this possible. Our best-selling briquetting press series Dksdpfx Aod Nm Sieaisr + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the press clamp (important for operation over 4 hours) and the hydraulic oil * Cooling unit recommended for continuous operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optimal briquette stroke: 80 mm, Performance (material dependent): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volt / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Option to cool press clamp: yes, with special accessory - cooled press clamp Option to cool hydraulic oil: yes Cooling of the press clamp and hydraulic oil with cooling unit (optional accessory) Option for fill level monitoring: yes Option for continuous briquette (log formation): yes (material dependent) Option for enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for raw material: - The moisture content (absolutely dry) must be between at least 6% and a maximum of 18% - Maximum chip length 20 mm - Installation temperature: climate-controlled room at minimum +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Būklė: naujas, Gamybos metai: 2025, Dar viena mašina iš karto prieinama! Briketų presas su PLC valdymu ir automatine briketų ilgio kontrole Dodpfxev Rpxle Aaijkr Našumas: iki 60 kg/h Briketas: 50 mm cilindrinis Variklis: 5,5 kW Matmenys: 1.900 x 1.350 x 1.410 mm Svoris: apie 860 kg Reikalavimai: Išeitinė medžiaga idealiai trumpesnė nei 25 mm drožlių ilgio Drėgnumas 6–12% ATRO Mašina tinkama nepertraukiamam darbo režimui. Pvz., briketavimas iki 2,5 val.; 1 val. pertrauka ir pan. Jei mašiną reikia eksploatuoti ilgiau nei 2,5 val. nepertraukiamai, būtina prijungti papildomą aušinimą.

Būklė: naujas, Gamybos metai: 2026, * Production time approx. 4–5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several hundred machines in use by satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series are designed for compacting materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality in continuous operation. The pressing process is performed purely by hydraulic pressure, without the addition of binding agents. Depending on the material, the volume of the feedstock can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger volumes or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on customer requirements, MPP NEM standalone machines can be configured as complete systems. The chip container for the press can be loaded manually, via conveyor belt, using a dust extractor, or with a tilting skip. For systems intended for fully automatic operation, the use of a lift-and-tilt device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for producing briquettes from homogeneous material. The length of a briquette varies depending on the model from 40 to 75 mm, and the diameter is either 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a drip tray to collect and recover coolant, cutting, and lubricating fluids. Non-ferrous metal chips up to approx. 20 mm in length can be loaded into the briquetting press’s storage hopper. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slider until the set pressing pressure is reached. Then the vertical cylinder rises, and the stable briquette is ejected. Briquetting offers the following advantages: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable resale -- Dkedpfxjchqxxo Aaijr Briquetting Press NEM 300 Throughput capacity approx. up to 200 kg per hour *highly material-dependent - Last test with aluminum granulate

Būklė: naujas, Gamybos metai: 2026, Skersmuo: 160 mm Papildomai, už papildomą mokestį, galima įsigyti šių skersmenų: 180, 200, 250, 300 mm. Dėl kitų skersmenų teiraukitės. Labai tvirta pramoninė konstrukcija. Idealiai tinka vinių/metalo dalių atskyrimui iš medžiagos srautų. Dkjdpfxjchuvro Aaijr Pavyzdžiui, po medžio smulkintuvo. Komplekte 3 itin galingi magnetai. * Pageidaujant, gaminį galima aprūpinti iki 6 magnetų (papildomas mokestis už kiekvieną papildomą magnetą +49 €) - Papildomai galima pasirinkti neodimio magnetus vietoje feritinių. Jūsų privalumai: + Ypač didelės peržiūros durelės su tarpine lengvam vinių pašalinimui + Tvirtas greitojo užrakto mechanizmas + Pagaminta Vokietijoje Peržiūros durelės / anga: 35x18 cm Montavimo ilgis gali skirtis.

Gamybos metai: 2026, būklė: naujas, *The offer is only for the neodymium overband magnet, not the underlying conveyor belt. *Neodymium magnets are among the strongest magnets in the world. They have extreme holding force and should not be compared with ferrite magnets. Extremely high separation efficiency, depending on material layer height and input material. Probably the most compact overband magnet on the market. Competitors often use less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Control unit not included Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm *Nails are attracted and discharged to the side along a length of 600 mm, outside the magnetic field. This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer, depending on the maximum length of metal parts. Ideal for separating nails from wood chips. Optionally usable in a single-shaft shredder with extraction. Dodpfx Asdubpueaiekr Requirements: *Your belt width, or effective internal width (of the existing conveyor belt), should ideally be less than 55 cm. *Suitable for separating nails from material streams with a height less than 12 mm, and chip lengths smaller than 25 mm. ----- Optional at extra charge: Cross and incline belt demonstration units from €8,770 net.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Demonstration machine with approx. 9 operating hours One more machine available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for higher throughput capacity We are happy to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarding, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple turning positions Option of double blade row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% a.d. (absolutely dry basis) Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC controller - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off when rotor is idling - Speed 70-90 rpm for high throughput - Cycling control to minimize idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform. Optional shredder features at extra cost: - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double blade row + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or material thickness less than 3 mm) - Angled conveyor belt + €8,770 net Angle: adjustable 0-60 degrees Discharge height: approx. 2,000 mm - Automatic overband magnet + €5,980 net Alternatively, fixed magnetic block over the conveyor belt for manual cleaning + €990 net (for low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop each synchronised with the shredder) Alternatively, manual start and stop of the belts + €595 net Dkedeb Ny Eyepfx Aaisr Material requirements: - Moisture content (a.d.) must be less than 30% - Installation temperature: heated area with at least +5°C - Metals and mineral contaminants such as sand, stones, etc., lead to increased wear

Būklė: naujas, Gamybos metai: 2026, Delivery time: approx. 4–5 months Your advantages: + Extremely large cutting unit opening: 1300 x 1200 mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful with 37 kW start-up power Technical data: Color: grey / blue Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (RPM): 65–125 Power requirement (kW): 37 Screen perforation (mm): 10–40 (selectable) Tools: 37/70 knives Extraction port diameter (mm): 200 mm Dimensions (LxWxH): 2,430 x 2,410 x 1,735 mm Weight (approx. kg): 3,500 Dkedogbkkrspfx Aaijr Options at extra cost: - Second knife row, for up to 30% higher throughput - High-speed hydraulics for increased throughput - Preparation for discharge conveyor - Discharge conveyor - Overband magnet HAWK-EYE *To shred veneer or paper (anything thinner than 3 mm), we recommend a segment floor. Special option, available at extra cost. --- Slider extension option *available at additional cost Maximum pallet size: up to 1200/1400 mm (with slider extension option, the upper cutting unit opening is 1300 x 1700 mm, surcharge: + €14,975) *significantly longer production time required. *Larger machines available on request --- Raw material requirements: - Moisture content (oven dry basis) must be below 20% - The feed material must be free from metals and mineral impurities. Tool damage and/or increased wear may otherwise result.

Būklė: naujas, Gamybos metai: 2026, * Optional features available at extra cost; see below * Approximate production time: +/- 6 months Dkedpfx Aaegfm Ryeior The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, ensuring consistent briquette quality in continuous operation. The compaction process operates without the addition of binding agents—only hydraulic pressing force is applied. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation beneath existing extraction and filtration systems, as part of a complete disposal unit, are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The chip container of the press can be loaded manually, via conveyor belt, by means of an extractor or using a tilting container trolley. For systems requiring fully automatic operation, the use of a lifting and tipping device in combination with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 80 mm, and the diameter is 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a catch pan. In this way, coolants, cutting fluids, and lubricants can be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage bin of the briquetting press. An agitator installed at the bottom of the bin prevents bridging and feeds the material into the pre-compaction chamber. In this chamber, a hydraulic slide compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slide until the set pressing pressure is reached. Afterwards, the vertical cylinder moves up and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the length of the produced briquettes. Advantages of the briquetting process: • Reduction of volume by up to 90% • Emulsion recovery • Cost savings in storage and transport • Efficient disposal • Profitable resale Briquetting Press NEM 900: For briquetting aluminium chips Throughput: up to 350 kg/h maximum (material-dependent; chip length less than 10 mm) During the last test with aluminium chips less than 18 mm – approx. 260 kg/h *Further details available after a free test with your material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical Data: Total power requirement: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Includes agitator Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (LxWxH) Weight: 2250 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Būklė: naujas, Gamybos metai: 2025, Ideal for shredding straw, polystyrene, leaves, hay, and bread. Throughput highly dependent on screen and input material: - Up to a maximum of 350 kg/h for straw with a 15 mm screen - Up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW - 400 Volt (9.2 kW or 15 kW available upon request) Optional: * Surcharge for the next larger machine with an 18.5 kW motor and larger silo diameter: + €2,750 net Robust steel construction Djdpfx Aaszbizjiokr Hardened cutting knives Screen with interchangeable inserts Available perforation sizes: (10), 15, 22, 26, 30, 40, or 60 mm With electric drive: star-delta switch, overload protection, and 8 m power cable, ready-to-plug Blow-out nozzle 150 mm Optionally for plastic or grain pipes Blow distance approx. 12 m Chassis with 2 running wheels Ø 380 mm and one swiveling support wheel Ø 125 mm All wheels with solid rubber tires Dimensions approx. 1200 x 900 x 1270/1400 mm (L x W x H) Weight approx. 240 kg Spare parts and options: 24 hardened knives: €9.90 each (net) 6 bolts: €14.90 each (net) 1 screen: €475 (net) Lid: €290 each (net) Polystyrene disc: €600 each (net)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Special-purpose machine for plastic shredding Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, offcuts from wood pallets, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Dkedped H R Sxsfx Aaijr Includes: - Special rotor with embedded knives (reduced load uptake) - Minimal cutting gap between cutter and counter-knife Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Control system: PLC Feed opening (top): 600 x 800 mm Recommended maximum material size: approx. 500 x 500 mm (*height less relevant) Hydraulically actuated pusher Screen perforation to choice (25–40 mm). For plastics, coarser screens (30–40 mm) are recommended. *If finer granulation is required, a two-stage shredding process with a downstream MVZ granulator (screens 5–15 mm) is recommended. Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Additional options for surcharge: - Shredder base raised by approx. 25 cm (prepared for conveyor discharge) + €1,980 net - Angle belt conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (start and stop synchronized with shredder) - Alternatively, manual start and stop on conveyor + €595 net Material requirements: - Moisture content (atro) must be below 25% - Metal and mineral contaminants such as sand or stones increase wear. We will gladly arrange a free trial with your material at our location in Neckartailfingen. Alternatively, you can ship your material to us, and we will document the test with photos and videos. --- *Only suitable for brittle plastics with medium hardness *Not suitable for elastic or extremely hard and heavy plastics, as this may affect machine durability. --- Larger machine versions available: Base machine: Shredder MGZ 830 K-S – 18.5 kW Feed opening (top): 800 x 1,000 mm Max. material size approx. 720 x 700 mm (*height less relevant) From €39,995 net – options priced as required Base machine: Shredder MGZ 1030 K-S – 22 kW Feed opening (top): 1,000 x 1,000 mm Max. material size approx. 900 x 700 mm (*height less relevant) From €49,975 net – options priced as required Base machine: Shredder MGZ 1330 K-S – 37 kW Feed opening (top): 1,300 x 1,200 mm Max. material size approx. 1,200 x 700 mm (*height less relevant) From €79,975 net – options priced as required