Liejimo įpurškimo staklės, užspaudimo jėga 5 000 - 9 999 kN pirkti naudotą (85)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 9 500 kN, varžto skersmuo: 120 mm, išstūmimo eiga: 300 mm, atvērimo eiga: 1 900 mm, TECHNINĖS DETALĖS Uždarymo jėga: 9 500 kN Atidarymo jėga: 665 kN Stulpelių atstumas: 1 400 x 1 150 mm Tvirtinimo plokštės: 1 960 x 1 710 mm Atidarymo eiga: 1 900 mm Min. formos aukštis: 500 mm Maks. formos aukštis: 1 200 mm Maks. atidarymo plotis: 2 400 mm Išstūmimo eiga: 300 mm Aukštos našumo sraigtas HPS-UN, skersmuo: 120 mm Antgalio spindulys: 30 mm Antgalio anga: 12 mm Sraigto skersmuo: 120 mm Lietinio svoris (HDPE): 5 420 g Lietimo tūris: 7 634 cm³ Specifinis įpurškimo slėgis: 2 257 bar ĮRANGOS DUOMENYS Iedpfx Aboxup Siokjik Matmenys ir svoris Matmenys (I x P x A): 12 770 x 3 420 x 2 750 mm Įrenginio svoris: 61,5 t

Sąlyga: labai geros būklės (naudotas), Haitian Type: Mars3 5300WM/2400-720 Overall dimensions (W x H x D): 8700 x 2800 x 2500 mm Screw diameter 2400: 70 mm / 720: 45 mm Injection volume 2400: 1239 cm³ / 720: 334 cm³ Iodpfovvlv Rsx Abksik Injection capacity 2400: 1127 g / 720: 304 g Injection rate 2400: 300 g/s / 720: 142 g/s Injection pressure 2400: 198 MPa / 720: 222 MPa Screw speed 2400: 0–184 rpm / 720: 0–180 rpm Rotary table diameter: 1250 mm Maximum rotary table load: 3.3 t Power supply: AC 400V 3P/N/PE 50 Hz 25 kA 227 A Injection unit: Single and twin-cylinder control 3 modes for injection retraction Clamping unit: Clamping force: 5300 kN Interface for Euro 18 robots Safety door Condition: used Scope of delivery: (see photo) Sale from location! Weight: approx. 31,000 kg (Specifications and technical details subject to change and error!) If you have further questions, feel free to call us.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Uždarymo jėga: 550 t Sraigto skersmuo: 62 mm Atstumas tarp kolonų V: 920 mm Atstumas tarp kolonų H: 1020 mm Įpurškimo tūris: 749 cm³ Formos storis: 600-1050 mm Maks. atidarymo eiga: 901 mm Karštų kanalų valdikliai: 16 x Hidrauliniai branduolių ištraukėjai: 2/3 (fiksuotos/judamos plokštės) Tipas: Horizontalus Iiedpsxbd R Hefx Abkjk Pavaros tipas: Hidraulinis

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Engel ES 4450/600HL Uždarymo jėga: 600 t Pagaminimo metai: 1999 Varžtas: 90 mm Iisdpfexxcyusx Abksk PVC cilindras su papildomu sraigtu PP, PE ir kt. Liejimo svoris: 2480 cm³ Spaudos plokštės dydis (horiz. x vert.): 1480 x 1300 mm Minimalus įrankio aukštis: 500 mm

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 6 500 kN, varžto skersmuo: 130 mm, darbinio tūrio: 6 172 cm³, įpurškimo slėgis: 1,296 juosta, plokštės plotis: 1 700 mm, plokštės aukštis: 1 704 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Maximum tool opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate (width x height): 1,704 x 1,700 mm Clear space (width x height): 930 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Stroke volume: 6,172 cc Shot weight (PS): 5,617 g Injection flow rate: 1,540 cc/s Screw rotation speed: 138 rpm Plasticizing rate: 238 g/s Nozzle contact force: 246 kN Iiedox Dbtwspfx Abkek Electrohydraulic Equipment Pump motor rated power: 132 kW Installed heating power: 70 kW Number of heating zones (cylinder): 7 MACHINE DETAILS Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg EQUIPMENT - Oscillation elements - 1 x air valve - 2 x hydraulic core pullers at BFAP - 2 x hydraulic core pullers at FFAP - 8 x hot runner control zones - Robot interface according to Euromap 67

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Engel ES 3550/600 HL Techniniai duomenys Pagaminimo metai: 2004 Uždarymo pusė: Uždarymo jėga: 6000 kN Plokščių dydis (h x v): 1480 x 1300 mm Minimalus įdiegimo aukštis: 500 mm Maksimalus įdiegimo aukštis: 1700 mm Atidarymo eiga: 1200 mm Išstūmėjo eiga: 250 mm Išstūmėjo jėga: 110 kN Ijdsxu Hnbepfx Abkoik Įpurškimo pusė: Sraigto skersmuo: 80 mm Eigos tūris: 1960 ccm Specifinis įpurškimo slėgis: 1730 bar Sraigto ilgis: 22 l/d Dozavimo eiga: 390 mm Šildymo zonų skaičius: 6 Antgalio eiga: 700 mm

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, veikimo valandos: 70 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 90 mm, tarpas tarp stulpų: 1 000 mm, įpurškimo slėgis: 1 742 juosta, atvērimo eiga: 2 000 mm, TECHNINĖS DETALĖS Iedoxup Nnopfx Abkoik Sandarumo jėga: 8 000 kN Maksimali įrankio atidarymo jėga: 356 kN Judančios atidarymo plokštės padavimo jėga: 98 kN Judančios uždarymo plokštės jėga: 92 kN Plokštės dydis (A x P): 1 610 mm x 1 530 mm Stulpelių tarpai (A x P): 1 120 mm x 1 000 mm Įrankio atidarymo eiga: 1 400 mm Minimali įrankio aukštis: 600 mm Didžiausias atidarymas: 2 000 mm Hidraulinio išstūmėjo eiga: 250 mm Sraigto diametras: 90 mm L/D santykis: 23 Įpurškimo slėgis: 1 742 bar Įpurškimo tūris: 2 863 cm³ Šūvio svoris (PS): 2 605 g MAŠINOS DETALĖS Išmatavimai ir svoris Išmatavimai (I x P x A): 10 500 x 2 860 x 2 890 mm Svoris: 43 000 kg Veikimo valandos: 70 000 h

Sąlyga: naudotas, Gamybos metai: 2019, spaudimo jėga: 700 kN, darbinio tūrio: 3 691 cm³, įpurškimo slėgis: 1 780 juosta, bendras svoris: 34 000 kg, sraigtinio konvejerio skersmuo: 100 mm, Pristatymo sąlygos: iš vietos Pristatymo laikas: pagal susitarimą Ijdpfx Aowc D T Hsbkoik Apmokėjimo sąlygos: 100% apmokėjimas prieš perimant įrenginį, grynoji suma

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2020, Clamping force: 500 t Iedpfjwznqysx Abkoik Screw diameter: 90 mm Distance between columns (front): 910 mm Distance between columns (rear): 830 mm Type: Horizontal Drive: Hydraulic

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, Engel ES 3550/650 Iodpfx Aboxvmmyokeik Clamping force: 650 t Up to 725 t clamping force possible Year of manufacture: 1996 Tie bar spacing: 102.5 x 92.5 cm Screw diameter: 90 mm Shot weight: 2400 g Shot weight: 2230 g Tie bar distance (other direction): 92.5 x 102.5 cm

Sąlyga: naudotas, Gamybos metai: 2010, We offer for sale a STORK 900 injection moulding machine. Specifications are as follows: Year of manufacture: 2010 Installed power: 132 kW Maximum injection speed: 400 mm/s Maximum injection pressure: 1650 bar Screw diameter: 98 mm Maximum shot weight for PP: 3180 g Clamping force: 9000 kN Tie bar spacing: 1010 x 1010 mm Minimum mold height: 300 mm Maximum platen opening: 1190 mm Maximum ejector stroke height: 700 mm Locating ring diameter: 250 mm Iodopmr H Iopfx Abkeik Maximum ejector stroke: 300 mm Mold mounting plate dimensions: 1570 x 1560 mm Injection unit volume: 5857 g Nozzle hole diameter: 8 mm The machine is equipped with a Sytrama robot. The injection moulding machine is in good condition and is currently in operation. Inspection on site is possible or we can provide a video demonstrating the machine in operation.

Sąlyga: naujas, Engel bimetalinis sraigtinis cilindras, naujas ir nenaudotas Diametras: 105 mm LD 22 Ijdpfjxpu I Sjx Abkeik 4550 vienetas: 3380 cm3 5550 vienetas: 3700 cm3

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Liejimo mašina: Krauss Maffei KM 800-5000 MC Pagaminimo metai: 2001 Darbo valandų skaičius: 70 000 h Konfigūracija: Mašina su robotu, apsaugine tvora ir transporteriu Prieinamumas: Galimos dvi identiškos mašinos Uždarymo sistema: Uždarymo jėga: 8 000 kN Maksimali formos atidarymo jėga: 356 kN Judamos plokštės (atidarant) jėga: 98 kN Judamos plokštės (uždarant) jėga: 92 kN Formos plokštės matmenys (Aukštis x Plotis): 1 610 mm x 1 530 mm Atstumas tarp kolonų (Aukštis x Plotis): 1 120 mm x 1 000 mm Formos atidarymo eiga: 1 400 mm Minimalaus formos aukštis: 600 mm Maksimalus formos atidarymas: 2 000 mm Hidraulinio išstūmiklio eiga: 250 mm Liejimo skyrius: Sraigto skersmuo: 90 mm L/D santykis: 23 Liejimo slėgis: 1 742 bar Liejimo tūris: 2 863 cm³ Liejimo masė (PS): 2 605 g Matmenys ir svoris: Iisdpfx Absxqh I Iekjk Mašinos matmenys (Ilgis x Plotis x Aukštis): 10,5 x 2,86 x 2,89 m Svoris: 43 tonos

Sąlyga: naudotas, Gamybos metai: 2015, Techninės detalės: Uždarymo jėga: 6600 kN Mašinos svoris apie: 45,5 t Iiedow I E R Nopfx Abkek

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Engel duo 1800/500 eco drive Uždarymo jėga: 500 t Sraigto skersmuo: 70 mm Įpurškimo tūris: 1139 cm3 Įpurškimo slėgis: 1735 bar Atstumas tarp kolonų V: 830 mm Isdow Hbylepfx Abkoik Atstumas tarp kolonų H: 910 mm Tipas: Horizontalus Pavaros tipas: Hidraulinė CC300 valdymas Darbo valandos: 38 000 Euromap 67 2 šerdies ištraukikliai Ecodrive 2 siurbliai Greito prispaudimo sistema

Sąlyga: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Spaudimo jėga: 128 t. Tempiamųjų strypų atstumas: 410 × 410 mm. Mašinos Nr.: 13A350. Plokštelių dydis: 650 × 652 mm. Formos aukštis (min.–maks.): 140–440 mm. Atidarymo eiga: 360 mm. Išstūmėjo eiga: 95 mm. Išstūmėjo jėga: 4 t. Sraigto skersmuo: 42 / 47 / 53 mm. L/D santykis: 21,9 / 19,6 / 17,4. Įpurškimo svoris (PS): diam. 42 – 216 g, diam. 47 – 271 g, diam. 53 – 344 g. Įpurškimo tūris: 235 / 295 / 375 cm³. Įpurškimo slėgis: 2005 / 1600 / 1260 kg/cm². Įpurškimo eiga: 170 mm. Sraigto sukimosi greitis: 0–200 aps./min. Mašinos matmenys (I × P × A): 5,0 × 1,2 × 1,88 m. Mašinos svoris: 4500 kg. Isdpfex Hibdex Abksik

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Netstal EVOS 5500-2000 Injection Moulding Machine Year of manufacture: 2015 Highly compact, hydraulic, three-platen clamping unit with encapsulated lubrication system, ensuring an oil-free environment in the mould area. High-precision, wear-resistant linear guides guarantee maximum mould longevity and the highest machine availability. The hybrid injection unit features a modular design and a flexible performance package (metering, holding pressure, injection), adaptable for various applications. Superior plasticising performance and optimal melt quality are ensured through process-appropriate component selection. Servo-electric metering drive and advanced valve technology guarantee energy-efficient operation. Technical Specifications Designation: CE compliant according to EU Directive 2006/42/EC (EN 60204, etc.) Mould installation height: 600–1050 mm Injection unit drive: dosing axis speed up to 420 rpm, torque 2400 Nm Injection Unit Injection speed: top dynamics enabled by high-performance servo valve technology Screw: diameter 62 mm, length 25.2D, version B – Three-zone screw made of wear-resistant, hardened tool steel – Injection pressure: 2400 bar – Injection volume: 749 cm³ Clamping Unit Ejector force: 123.2 kN Main drive: Eco Powerunit 55 kW – Dual pump system with hydraulic accumulator – High-efficiency synchronous drive – Adaptive control technology ensures maximum energy efficiency Oil cooling: supply water temperature 35°C Base Cylinder head with open nozzle, prepared for pneumatic control Guide sleeve R = 35 mm, through hole D = 5 mm Mould plate hole pattern: Euromap standard Alignment & Ejector System Alignment on nozzle side plate: D = 125 H7 x 20 mm (Euromap) Through hole in movable platen: D = 80 mm Hydraulic ejector position: non-operator side Ejector pin layout: Euromap Ejector controlled Mould Hydraulics 4 hydraulic circuits for auxiliary functions (ejector, core pulls, nozzle shut-off pins) Iodpfx Abjxl Ul Ajkeik Electrically controlled check valves in circuits A + B Freely configurable functions with position protection Nozzle hydraulics with shut-off needle 4 hydraulic circuits Flow rate and pressure manually adjustable Open/Close function Special software: cascade control Pneumatics & Cooling Water cooling manifold and hot runner circuit – 4-section, switchable Pneumatics: 2x 3/2 valves, capacity 890 l/min Position: non-operator side on the nozzle side plate Electrical / Software / Interface Frequency: 50 Hz Supply: 400V, 3P + N + E, tolerance ±10% (transformer required for greater deviations) Surge protection Mould heating: – 4 circuits of 3.3 kW each – 8 circuits of 0.75 kW each Connectors: HAN 16E for power supply and sensors, Euromap 14 Sockets: – 2x16A CEKON (main switch controlled) – 1x32A CEKON with FI switch Interfaces: – Euromap 15 – full feature set (parts 1–5) – SPC (Statistical Process Control) – Euromap 66 (control for 5 heating/cooling devices) – Euromap 67 (robot interface for ejector and hydraulics) External error signals: 2 inputs in control cabinet Operator identification: PIN

Sąlyga: geras (naudotas), Gamybos metai: 2004, Clamping force: 700 t Screw diameter: 90 mm Distance between columns (vertical): 930 mm Distance between columns (horizontal): 1025 mm Shot volume: 2480 cm3 Type: Horizontal Drive: Hydraulic Isdewnqk Nepfx Abkoik Engel Linear Robot ERC53/1-E

Sąlyga: naujas, Gamybos metai: 2025, Injection Molding Machine – Krauss Maffei KM 651-6100 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit pressure regulation. MC6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 95 mm, with non-return valve and open nozzle. Nozzle radius: 25 mm Nozzle bore: 9 mm Technical Data (Standard Version) Clamping Unit Clamping force: 6500 kN Opening force: 455 kN Platen dimensions (H x V): 1660 x 1530 mm Tie-bar spacing (H x V): 1200 x 1020 mm Opening stroke: 1450 mm Mold height (min.–max.): 450 – 1000 mm Daylight: 1900 mm Ejector stroke: 300 mm Ejector force front/rear: 140 / 70 kN Injection Unit Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Injection volume: 3367 cm³ Iodpfx Absxdd U Dskjik Shot weight (PS): 2391 g Injection speed: 110 mm/s Injection rate: 780 cm³/s Screw speed (standard): 147 rpm Plasticizing rate (at standard screw speed): 102 g/s Nozzle contact force: 166 kN Electro-Hydraulic System Pump motor power: 97 kW Installed heater power: 54 kW Number of heating zones (barrel): 7 Dry cycle time, Euromap 6: 3.3 s / 840 mm Dry cycle time, KM standard: 2.9 s / 600 mm Oil tank capacity: 1435 l Linear Robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Part depositing on operator-opposite side Axes: X-axis (from mold): 900 mm, servomotor Y-axis (vertical, telescopic, with brake): 1000/1000 mm, servomotor Z-axis (crosswise): 2500 mm, servomotor Dimensions and Weight Net weight (incl. control cabinet): 38.5 t Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Clamping force: 650 t Screw diameter: 80 mm Shot weight: 2013 g Distance between tie bars (vertical): 910 mm Distance between tie bars (horizontal): 1040 mm Mould opening stroke: 800/1350 mm Mould height min-max: 400-950 mm Isdpewzlz Nefx Abkoik Daylight opening: 1750 mm Shot volume: 2212 cm³ Type: Horizontal Drive: Hydraulic 4 hydraulic cores 2 air valves New screw and barrel 1 year ago.

Sąlyga: naujas, Gamybos metai: 2025, Injection Molding Machine – Krauss Maffei KM 500-4300 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit control. MC6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 90 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle orifice: 6 mm Technical specifications (standard version) Clamping Unit Clamping force: 5000 kN Opening force: 350 kN Platen dimensions (H x V): 1430 x 1350 mm Tie bar spacing (H x V): 1040 x 910 mm Opening stroke: 1350 mm Mold height (min.–max.): 400–950 mm Daylight: 1750 mm Ejector stroke: 250 mm Ejector force front/rear: 95 / 49 kN Injection Unit Iisdpfxjxdd S Ns Abkok Screw diameter: 90 mm L/D ratio: 20.0 Injection pressure: 1839 bar Shot volume: 2290 cm³ Shot weight (PS): 2084 g Injection speed: 100 mm/s Injection flow rate: 636 cm³/s Screw speed (standard): 195 rpm Plasticizing rate (at standard screw speed): 134 g/s Nozzle contact force: 129 kN Electro-hydraulic system Pump motor power: 90 kW Installed heater power: 44 kW Number of barrel heating zones: 7 Dry cycle time according to Euromap 6: 2.8 s / 728 mm Dry cycle time according to KM standard: 2.5 s / 520 mm Hydraulic oil volume: 1180 l Linear Robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Part deposition on operator-offside Axes: X axis (from mold): 900 mm, servomotor Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servomotor Z axis (transverse): 2500 mm, servomotor Dimensions and Weight Net weight (with control cabinet): 25.0 t Machine dimensions (L x W x H): 8.08 x 2.80 x 2.39 m

Sąlyga: geras (naudotas), Gamybos metai: 2011, Injection moulding machine Krauss Maffei KM 850-12000 MX With Krauss Maffei LRX 500 robot Year of manufacture: 2011 Machine description: Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV-controlled injection unit. MC 5 control system with colour monitor, integrated control panel, and USB data storage. Plasticizing unit: Complete plasticizing system for thermoplastics with a 135 mm diameter screw, shut-off nozzle, and open nozzle. Nozzle radius: 25 mm, nozzle orifice: 9 mm Technical data: Clamping unit: Clamping force: 8,500 kN Mould opening force: 560 kN Platen size (H x V): 1600 x 1600 mm Tie bar spacing (H x V): 1140 x 1140 mm Mould opening stroke: 1600 mm Mould height (min-max): 500 - 1100 mm Daylight opening: 2100 mm Ejector stroke: 300 mm Ejector force: 200 / 100 kN Injection unit: Screw diameter: 135 mm Injection pressure: 1389 bar Injection volume: 8588 cm³ Shot weight (PS): 6098 g Injection speed: 1414 cm³/s Ijdpfx Ajw Rdlqobkoik Electro-hydraulic equipment: Pump motor power: 132 kW Dry cycle time (Euromap 6): 965 cycles/h Oil tank capacity: 2440 l Dimensions and weight: Net weight with control cabinet: 49 t Footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2005, Injection Moulding Machine ENGEL CL 2550/550 Year of manufacture: 2005 Robot name: "ENGEL ERC53/1-F" Clamping force [ton]: 550 Maximum daylight between platens [mm]: 1650 Min. mould height [mm]: 310 Max. mould height [mm]: 800 Tie bar spacing (mm): 915 x 860 Platen dimensions (mm): 1345 x 1280 Max. ejector stroke [mm]: 250 Screw diameter [mm]: 80 Shot weight [g]: 1800 Iedpfx Aoq Nybgjbkeik Oil capacity [litres]: 1000 Injection sequence in mould: 2 Machine with robot, ready for operation Number of hydraulic cores P/R: 1/1

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Clamping force: 900 t Screw diameter: 90 mm Shot weight: 1576 g Distance between tie bars (vertical): 1000 mm Distance between tie bars (horizontal): 1180 mm Shot volume: 1732 cm³ Type: Horizontal Ijdpfx Abov D U Hnokoik Drive: Hydraulic

Sąlyga: geras (naudotas), Gamybos metai: 2004, ENGEL DUO 4550/700 – Technical Specifications General Information: Machine Model: DUO 4550/700 Control System: CC100 Clamping Unit: Clamping Force: 7,000 kN Opening Force (with pressure pad): 510 kN Opening Stroke: 1,350 mm Minimum Mold Height: 450 mm Maximum Mold Height: 1,350 mm Daylight (platens open): 2,700 mm Platen Dimensions (W × H): 1,460 × 1,360 mm Tie Bar Spacing (W × H): 1,030 × 930 mm Max. Mold Weight: 9,000 kg Ejector Stroke: 300 mm Ejector Force: 90 kN Number of Ejector Strokes (Euromap 6): 8 Dry Cycle Time (Euromap 6): 7.0 seconds Injection Unit: Screw Diameter: 90 mm L/D Ratio (barrier): 24 Plasticizing Rate: 2,488 cm³/s Shot Volume: 2,860 cm³ Iodpfx Abev U Dn Nokeik Shot Weight (theoretical): 2,600 g Injection Flow Rate: 533 cm³/s Injection Pressure: 1,910 bar Specific Injection Pressure: 2,100 bar Nozzle Length: 185 mm Nozzle Contact Force: 65 kN Heating Power (Zone 7): 62 kW Pump Drive Power: 75 kW Oil Capacity: 1,000 liters Weight: Net Weight of Clamping Unit: 22 tons Net Weight of Injection Unit: 10 tons