Liejimo pirkti naudotą (1 453)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, KRAUSS MAFFEI KM 420-2000 CX Injection Moulding Machine Basic Data Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine Number: 61030600 Year of Manufacture: 2018 Control System: MC6 Control Panel: Colour monitor integrated with operator console The machine is equipped with a fully hydraulic clamping system and the advanced MC6 control system. Plasticising Unit Complete plasticising unit designed for processing thermoplastics. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: yes Nozzle type: open Nozzle radius: 15 mm Nozzle opening: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen dimensions (horizontal × vertical): 1270 × 1230 mm Tie bar spacing (horizontal × vertical): 800 × 800 mm Maximum mould opening stroke: 1020 mm Minimum mould height: 580 mm Maximum platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Gbedpfx Ajyugkwscyoi Injection throughput: 368 cm³/s Screw speed: 285 rpm Plasticising rate: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Pump motor rated power: 75 kW Installed heater power: 29 kW Number of barrel heating zones: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Machine Dimensions & Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Maximum mould weight: 6700 kg Optional ESS (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor via a frequency inverter, adapting the motor speed to the actual demand during each production cycle. Key Benefits - Reduction of electrical energy consumption by up to 30% - Hydraulic pump servo drive technology - Worldwide quality and proven industrial technology - Reduced energy losses during idle running - Lower hydraulic system temperature rise - Extended service life of hydraulic components - Retrofit possible on existing hydraulic injection moulding machines

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, KRAUSS MAFFEI Injection Molding Machine KM 1100-12000 MX Basic Information Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Control panel: color display integrated with the operator console Interfaces: 3 USB ports The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for processing thermoplastics, with abrasion protection. Clamping Unit - Clamping force: 11,000 kN - Mold opening force: 770 kN - Platen dimensions (horizontal × vertical): 2210 × 1910 mm - Tie-bar spacing (horizontal × vertical): 1550 × 1250 mm - Mold opening stroke: 2000 mm - Minimum mold height: 600 mm - Maximum mold height: 1200 mm - Platen stroke: 2600 mm - Ejector stroke: 300 mm - Ejector force: 220 / 110 kN Injection Unit - Screw diameter: 120 mm - Maximum injection pressure: 1758 bar - Injection volume: 6786 cm³ - Shot weight (PS): 6175 g - Screw speed (standard / option): 103 / 145 rpm - Injection rate (standard): 1118 cm³/s - Injection rate (accumulator): 1696 cm³/s Electrical & Hydraulic Equipment - Rated pump motor power: 132 kW - Installed heater power: 82 kW - Number of cylinder heating zones: 7 - Number of dry cycles (EUROMAP): 802 cycles/h - Hydraulic oil tank capacity: 2440 l Gbjdpfx Asyugfzocyji Machine Dimensions & Weight - Net weight (incl. control cabinet): 73 t - Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional Energy Saving System ESS (Energy Saving Systems) The machine can be fitted with a state-of-the-art ESS servo drive system, significantly increasing the energy efficiency of hydraulic injection molding machines. The system regulates the operation of the hydraulic pump motor using a frequency inverter, adjusting the motor speed according to current demand during the production cycle. Main Benefits - Reduction of electrical energy consumption by up to 30% - Hydraulic pump servo drive technology - World-class quality and proven technology used in the plastics processing industry - Reduced energy losses during idle operation - Lower heating of the hydraulic system - Extended lifespan of the motor and hydraulic components - Possibility to retrofit existing hydraulic injection molding machines The ESS system allows for significant reduction of the machine’s operating costs while maintaining full production parameters.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, DEMAG System 800/1120-9500 Injection Moulding Machine Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Platen dimensions (H × V): 1620 × 1500 mm Tie bar clearance (H × V): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum daylight between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions & Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional ESS (Energy Saving System) The machine can be equipped with a modern ESS servo drive system, which significantly increases energy efficiency for hydraulic injection moulding machines. The system controls the hydraulic pump motor via a frequency inverter, adapting the rotational speed to the actual demand during the production cycle. As a result, electrical power is only consumed when the machine actually requires it. Key Benefits: - Up to 30% reduction in electrical energy consumption - Hydraulic pump servo drive technology - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during idle operation Gjdpfxjyugcto Acyobi - Lower heating of the hydraulic system - Extended service life of hydraulic components - Available for retrofit on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production performance.

Būklė: geras (naudotas), Gamybos metai: 2001, NETSTAL S 6000-5500E Injection Moulding Machine Basic Information Manufacturer: Netstal Model: S 6000-5500E Year of manufacture: 2001 Operating hours: 88,933 h Clamping Unit Clamping force: 6,000 kN Platen dimensions (H × W): 1,620 × 1,550 mm Tie bar spacing (H × W): 1,020 × 1,020 mm Minimum mould height: 500 mm Maximum mould height: 1,000 mm Maximum mould opening: 1,950 mm Centring ring diameter: 160 mm Maximum ejector stroke: 280 mm Injection Unit Screw diameter: 90 mm L/D ratio: 27 Injection volume: 2,290 cm³ Injection weight (PS): 2,196 g Maximum injection pressure: 2,410 bar Maximum injection speed: 4,453 cm³/s Machine Dimensions and Weight Clamping unit dimensions: 7.21 × 2.40 × 2.50 m Injection unit dimensions: 4.60 × 2.61 × 2.50 m Total machine weight: 62,000 kg (62 t) Godsyugcgepfx Acyobi Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which improves the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor using a frequency converter that adjusts the motor speed to the actual demand during the production cycle. As a result, electrical power is consumed only when the machine truly requires it. Advantages of the ESS System: - Reduction of electrical energy consumption by up to 30% - Hydraulic pump servo drive technology - World-class quality and proven technology used in the plastics processing industry - Reduced energy losses during idle operation - Lower heating of the hydraulic system - Extended service life of hydraulic components - Possibility of retrofit installation in existing hydraulic injection moulding machines The ESS system enables significant reduction of machine operating costs while maintaining full production parameters.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Details Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Platen dimensions (horizontal × vertical): 2,150 × 1,880 mm Tie bar spacing (horizontal × vertical): 1,500 × 1,250 mm Minimum mould height: 700 mm Maximum mould height: 1,400 mm Maximum opening stroke: 2,900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (PS): 9,880 g Maximum injection pressure: 1,454 bar Electro-hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and tube 2015 – new IBED 2015 – new wiring plate 2017 – new motor and pump no. 2 2017 – new injection cylinder piston rod BS with seals 2017 – replacement of oil cooler circulation pump Gjdpfx Asyugaljcyobi 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves the energy efficiency of hydraulic plastic injection moulding machines. The system controls the hydraulic pump motor by using a frequency inverter, which adjusts the motor speed according to the machine’s actual demand during the production cycle. This ensures that electrical energy is only consumed when actually needed. Main Benefits - Reduction of electrical energy consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy loss during machine idle time - Lower heating of the hydraulic system - Increased service life of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system allows you to significantly reduce the operating costs of the machine while maintaining full production parameters.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, ENGEL DUO 11050/2300 Injection Moulding Machine Basic Information Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h Clamping Unit Gbjdpfx Asyuf Tdecyji Clamping force: 2,300 kN Platen dimensions (H × V): 2,900 × 2,500 mm Clearance between tie-bars (H × V): 2,000 × 1,600 mm Minimum mould height: 700 mm Maximum mould height: 1,890 mm Maximum opening stroke: 3,800 mm Injection Unit Screw diameter: 135 mm Injection volume: 8,870 cm³ Shot weight (PS): 8,071 g Maximum injection pressure: 1,600 bar Machine Dimensions and Weight Net weight of the machine: 113 t Control cabinet weight: 18 t Total weight: approx. 131 t Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which improves the energy efficiency of hydraulic plastic injection moulding machines. This system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor speed to the actual demand during the production cycle. As a result, electrical energy is consumed only when actually needed. Benefits of the ESS System - Reduction of electricity consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class, proven technology used in the plastics processing industry - Reduced energy loss during idle operation - Lower heating of the hydraulic system - Extended service life of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system allows a significant reduction in machine operating costs while maintaining full production parameters.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, KRAUSS MAFFEI Injection Moulding Machine KM 4000-24500 MC with optional ESS energy-saving system Basic Information Manufacturer: KraussMaffei Model: KM 4000-24500 MC Gbedpfx Acsyuf N Eoyoi Year of manufacture: 2003 Control system: MC4 Software languages: German, English, Swedish Clamping Unit Clamping force: 40,000 kN Mould opening force: 2,525 kN Platen dimensions: 3315 × 2920 mm Clearance between tie bars: 2240 × 1800 mm Mould opening stroke: 3100 mm Minimum mould height: 1100 mm Maximum mould height: 2000 mm Maximum daylight opening: 4200 mm Ejector stroke: 350 mm Ejector force: 772 / 368 kN Injection Unit (HPS-AT) Screw diameter: 150 mm L/D ratio: 23 Maximum injection pressure: 1843 bar Injection volume: 13,254 cm³ Shot weight (PS): 12,061 g Injection rate: 1431 cm³/s Plasticising capacity: 266 g/s Electrical-Hydraulic System Hydraulic pump motor power: 200 kW Heater power: 159 kW Number of heating zones (barrel): 7 Dry cycle time (EUROMAP 6): 270 cycles/h Hydraulic oil tank capacity: 2700 l Machine Dimensions and Weight Machine dimensions (L × W × H): 17.3 × 4.9 × 3.74 m Machine weight: 247 t Maximum mould weight: 90,000 kg Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo-drive system that significantly improves the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency converter, which adjusts the motor’s rotational speed to the actual demand of the machine during the production cycle. As a result, electric power is only consumed when it is truly needed. Key benefits of the ESS system: - reduction of electrical energy consumption by up to 30% - hydraulic pump servo-drive technology - world-class, proven technology used in the plastics processing industry - reduced energy consumption during machine idle time - lower heating of hydraulic circuit - extended service life of the motor and hydraulic components - retrofittable to existing hydraulic injection moulding machines without modification of the machine structure The ESS system is a state-of-the-art solution that significantly lowers the operating costs of injection moulding machines, while maintaining full production performance.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Arburg 820S 4000-2100/400 / Production Line with Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection Unit: Screw diameter: 60 mm Shot weight: 723 g Injection pressure: 2500 bar Dosage volume: 792 cc Clamping Unit: Clamping force: 400 t Tie bar spacing: 820x820 mm Platen dimensions: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional Equipment: 2K injection moulding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air valves x 6 Hydraulic core pullers with needle shut-off, controlled by proportional valve x 4 pairs Hot runner controller x 24 Reinforced injection unit – bimetallic Proportional valve on vertical injection unit – precise dosing Machine with six cylinders / accumulators with compressed nitrogen (additional charge for fast operation) Parallel movements Automatic mould height adjustment Screw diameter in vertical injection unit: ⌀40 mm - 184 g/PS Integrated pressure monitoring system by Kistler – mould cavity pressure measurement Original Weber rotary table: highly precise, electrically driven by a servomotor controlled via inverter Rotary table diameter: 1200 mm Rotary table available at extra cost Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: all axes driven electrically by servomotors (X, Y, Z telescopic) Approximate stroke: X - 5000 mm Y - 1400 mm Z - 2000 mm Gbodpfxjylkk Ao Acyei Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and safety housing Robot available at extra cost Dimensions: Weight: 21,000 kg Length/Width/Height: 8.00x2.32x4.21 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the selected machine’s technical tests or participate in live technical demonstrations at our company in Łódź. Price: Upon request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Arburg 1500T 3200-1300 e² / Hybrid Machine with Rotary Table Gbodpfsylkkpjx Acyoi Year of manufacture: 2011 Injection Unit: Screw diameter: 60 mm Shot weight: 607 g Injection pressure: 2000 bar Dosage volume: 664 ccm Clamping Unit: Clamping force: 320 t Tie bar spacing: 0x0 mm Platen size: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Hybrid machine: high-speed, energy-efficient, and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Control system with air valve Hydraulic core pull x 3 Control system with hot runner x 13 Injection unit hardened - bimetallic Main motor - servo motor driven by inverter Highly precise rotary table, servo motor-driven, controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to modify the injection unit for vertical operation Dimensions: Weight: 16,080 kg Length/Width/Height: 4.91x2.12x4.62 m All offered machines are started and tested by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA – touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Hot runner control x 15 Injection unit hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for high-speed operation) ECO – the machine is equipped with a system for adjusting the minimum mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servo motors (electric); C-axis – pneumatic Travel paths (axes): X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Gedpfxjylkkis Acyobi Touch control panel Robot with adapter, conveyor belt, and protective enclosure Purchase of robot and conveyor belt available for an additional charge Dimensions: Weight: 12,510 kg Length/width/height: 6.57x1.76x2.46 m All offered machines are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: Upon request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Arburg 570S 2200-290/100/100 / Production Line with Wittmann W823 Robot / Operating hours: 20,499 h in automatic mode Year of manufacture: 2016 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Plasticizing volume: 144 cm³ Clamping Unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA – Touchscreen Additional equipment: 3-component high-speed injection molding machine Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 interface Robot interface 6x pneumatic valves 4x hydraulic core pulls, controlled by proportional valves Hot runner control Injection unit hardened – bimetallic Gbjdpfx Asylkkcecyei Proportional valve on the injection unit – precise injection Machine equipped with two cylinders / compressed nitrogen accumulator (additional charge for fast operation) Machine designed for operation with an electric rotary table. The machine features an inverter for controlling the servomotor of the rotary table and an interface for table connection Parallel movements possible Screw diameter in vertical injection unit: ⌀25 mm – 45 g/PS Screw diameter in lateral injection unit: ⌀25 mm – 45 g/PS Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes driven by servomotors (electric); axes C and movement A Travel distances per axis: X-550, Y-1400 (telescopic), Z-3500 Touch control panel Robot safety package included Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor available at extra charge Dimensions: Weight: 10,830 kg Length/Width/Height: 5.53x1.77x3.29 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, Arburg 570C 2000-350/150 / Production line with lateral Arburg Multilift robot / 2K machine Year of manufacture: 2003 Injection unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2120 bar Dosage volume: 182 ccm Clamping unit: Clamping force: 200 t Gbedpfxjylki Ss Acyei Tie bar distance: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with lateral Arburg Multilift robot 2K machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner interface Reinforced injection units – bimetallic Proportional valves on injection units – for precise dosing Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All offered machines are started up by our service technicians before delivery. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of Manufacture: 2011 Injection Unit: Screw Diameter: 50 mm Shot Weight: 359 g Injection Pressure: 2000 bar Dosage Volume: 392 ccm Clamping Unit: Clamping Force: 200 t Gjdpeylkixefx Acysbi Tie Bar Distance: 570x570 mm Platen Size: 795x795 mm Ejector: electric Clamping Unit: toggle lever Control: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot Interface Air Valve x 4 Hydraulic Core Pull x 2 Hot Runner Control x 12 Hardened Injection Unit - Bimetallic Main Motor - driven by servomotor with inverter - energy saving Injection unit is powered by a servomotor controlled by an inverter Machine equipped with cylinder/battery with compressed nitrogen (additional charge for fast operation) Central Lubrication Parallel Movements Arburg Multilift Select Robot, crosswise, 6kg Year of Manufacture: 03.2011 4-axis Robot: 3 axes powered by servomotors (electric); C axis - pneumatic Stroke per axis: X-400, Y-800, Z-1400 Robot with adapter, conveyor, and safety housing Purchase of the robot and conveyor at an additional price Dimensions: Weight: 8700 kg Length/Width/Height: 5.58x1.71x2.21 m All offered machines are commissioned by our service technicians before sale. A video of the selected machine's technical tests can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of manufacture: 09/2011 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosage volume: 144 cm³ Clamping Unit: Clamping force: 160 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional Equipment: 2-component injection moulding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total operating hours: 28,473 h Euromap 67 Robot interface Gjdoylkh Uepfx Acyobi Air valve x 3 Hydraulic core pullers controlled by proportional valve x 2 Reinforced injection units – bimetallic Proportional valves on injection units – precise injection Machine with two cylinders / batteries with compressed nitrogen (additional charging for high-speed operation) Parallel movements Screw diameter vertical injection unit: ⌀25 mm - 45 g/PS Original rotary table Rotary table available for purchase at extra cost Wittmann W823 Robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servo motors (electric); C-axis and A-movement Travel ranges per axis: X-550, Y-1400 (telescopic), Z-3500 Touch control panel Safety package for robot Robot with adapter, protective housing Robot available for purchase at extra cost Dimensions: Weight: 6720 kg Length/Width/Height: 4.41x1.84x3.20 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Arburg 520S 1600-400/170 e² / Production line with Geiger Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2,500 bar Dosage volume: 154 cc Clamping Unit: Clamping force: 160 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping system: hydraulic Control system: SELOGICA - touchscreen Additional Equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Controller with 12 hot runner zones Reinforced injection units – bimetallic Machine with double cylinders / batteries with compressed nitrogen (additional charge for fast operation) Parallel movements Screw diameter in vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg conveyor belt and sorting flap Original Weber rotary table, very precise – electrically driven Purchase of the rotary table and robot subject to additional charge Dimensions: Weight: 8,140 kg Length/Width/Height: 4.81x1.84x3.45 m Gsdpeylkhuefx Acysbi All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or participation in live technical tests at our facility in Łódź is possible. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Arburg 520H 1500-400 e² / Hybrid Machine Year of manufacture: 2011 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Gbodpfxjylkhhe Acyoi Metering volume: 201 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping system: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy efficient and very quiet Euromap 67 Robot interface Core pull control Control with 8 hot runner zones Injection unit hardened - bimetallic Main drive of the machine – servo motor powered by inverter – energy saving The injection unit is driven by a servo motor controlled by an inverter Machine equipped with cylinder / battery filled with compressed nitrogen (additional charge for high-speed operation) Central lubrication Parallel movements Priamus sensor – mold pressure control Dimensions: Weight: 6,010 kg Length/Width/Height: 4.67x1.56x2.21 m All offered machines are started up and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to attend live technical demonstrations at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Arburg 520H 1500-400 e² / Hybrid Machine Year of manufacture: 2011 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Metering volume: 201 cm³ Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: energy-saving and very quiet Godpfeylkhbox Acyjbi Euromap 67 Robot interface 4x air valve on the fixed platen side 3x air valve on the moving platen side 1x hydraulic core pull on the fixed platen side Injection unit hardened - bimetal Main motor: Servomotor driven by inverter - energy saving Injection unit driven by servomotor controlled by inverter Machine with cylinder / battery with compressed nitrogen (additional unit for quick operation) Central lubrication Parallel movements Automatic mold height adjustment Dimensions: Weight: 6550 kg Length/Width/Height: 4.67x1.56x2.21 m All machines offered are started up and tested by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you are welcome to attend technical live tests in our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cc Clamping unit: Clamping force: 150 t Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Core pull control Hardened injection unit - bimetallic Screw diameter can be changed Dimensions: Weight: 4,790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Gedpfx Aeylkgwscyjbi Pump/Motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All machines offered are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cc Clamping unit: Clamping force: 150 t Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Core pull control Hardened injection unit - bimetallic Screw diameter can be changed Dimensions: Weight: 4,790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pump/Motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All machines offered are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Gbsdpfx Aeylkgkecyoi Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Arburg 470C 1500-400 with Wittmann W711 Robot Year of manufacture: 2008 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cm³ Clamping unit: Clamping force: 150 t Tie bar distance: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Gjdpfx Ajylkgdscyebi Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface 1x air valve Hardened injection unit - bimetallic Proportional valve on injection unit – precise injection Wittmann W711 Robot Year of manufacture: 2007 4-axis robot: 3 axes with servo motors (electric); C axis Travel range of axes: X-420, Y-1200, Z-2000 Touch control panel Robot safety package Robot with adapter Purchase of the robot at an additional charge Dimensions: Weight: 4,900 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pump/Motor: 18.5 kW Heating: 9.7 kW Total power: 28.2 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Arburg 470C 1500-675 Year of manufacture: 2004 Injection unit: Screw diameter: 60 mm Gedpoylkfyefx Acyebi Shot weight: 427 g Injection pressure: 1440 bar Dosage volume: 508 cc Clamping unit: Clamping force: 150 t Tie-bar spacing: 470x470 mm Platen size: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Core pull control Injection unit hardened – bimetallic Parallel movements Dimensions: Weight: 4660 kg Length/Width/Height: 5.00x1.93x2.22 m Drive: Pump/Motor: 30 kW Heating capacity: 14.9 kW Total connected load: 44.9 kW All offered machines are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Arburg 470C 1500-150/150 / 2-component injection moulding machine / Machine in very good technical condition Gedsylkftjpfx Acyebi Year of manufacture: 2005 Injection Unit: Screw diameter: 25 mm Shot weight: 49 g Injection pressure: 2500 bar Dosage volume: 54 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 470 x 470 mm Platen size: 685 x 685 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: 2-component machine Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hardened injection unit – bimetallic Proportional valve on the injection unit – precise injection Type of injection unit: Vario – allows for e.g. lateral injection Parallel movements Vertical injection unit – screw diameter fi 25 mm (49 g/PS) It is possible to change the screw diameter in both injection units for the diameters recommended by the manufacturer: 30, 35 mm Dimensions: Weight: 5,700 kg Drive: Pump/motor: 30 kW Heating capacity: 2 x 9.4 kW Total power: 48.8 kW All machines offered are started and checked by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Arburg 470C 1500-400 with Wittmann W721 Robot Year of manufacture: 12/2006 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 470x470 mm Platen size: 650x650 mm Ejector: hydraulic Clamping system: hydraulic Control: SELOGICA - Touchscreen Additional Equipment: Euromap 67 Robot interface Control with air valve 1x hydraulic core pull Injection unit hardened - bimetallic Integrated conveyor belt and sorting flap Wittmann W721 robot Year: 2006 4-axis robot: 3 axes are driven by servo motors (electric); C-axis - pneumatic Axis travel (mm): X-550, Y-1200, Z-3000 Touch control panel Robot safety package Robot with adapter Robot purchase at additional cost Dimensions: Weight: 4900 kg Gbodsylkfmepfx Acyei Length/Width/Height: 4.44x1.63x2.09 m Drive: Pump/motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All machines on offer are started up by our service technicians prior to sale. A video of the technical tests of the machine selected can be provided or you can participate in live technical tests at our premises in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Arburg 420C 1300-675 with Star sprue picker Year of manufacture: 2002 Injection unit: Screw diameter: 50 mm Shot weight: 297 g Injection pressure: 2080 bar Metering volume: 353 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 420x420 mm Platen size: 605x605 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - bimetal Type of injection unit: Vario – This allows, for example, the use of the injection unit for side injection Covers on the operator side open automatically Dimensions: Weight: 4330 kg Length/Width/Height: 4.80x1.64x2.08 m Drive: Pump/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW Gjdpfx Ajylkfgecysbi All machines offered are started and tested by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Arburg 520S 1300-800 / Machine in very good technical condition Year of manufacture: 2008 Injection Unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Dosage volume: 392 cc Clamping Unit: Clamping force: 130 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Gedpjylkdiefx Acyjbi Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air valve x 2 Injection unit hardened - bimetallic The machine has been regularly serviced by authorized Arburg service in Germany Dimensions: Weight: 6450 kg Length/Width/Height: 4.81x1.57x2.19 m Drive: Pump/Motor: 30 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request