Arburg 305 pirkti naudotą (349)

Gamybos metai: 1993, Sąlyga: paruoštas naudoti (naudotas), A total of six used injection moulding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350 kN, injection pressure: 1,500 bar, shot weight: 35 g/PS, screw diameter: 22 mm, centring bore: 110 mm, mould opening stroke: 330 mm, control unit: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700 kN, screw diameter: 40 mm, centring bore: 125 mm, min./max. mould height: 190 mm/420 mm, tie bar distance X/Y: 305 mm/135 mm, mould opening stroke: 250 mm, control unit: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700 kN, injection pressure: 1,500 bar, shot weight: 117 g/PS, screw diameter: 35 mm, centring bore: 125 mm, min./max. mould height: 200 mm/400 mm, tie bar distance: 305 mm. Giodpfevb Hbfox Abdol 4) Arburg 221-75-350, year of manufacture: 1992, clamping force: 350 kN, injection pressure: 1,500 bar, screw diameter: 22 mm, centring bore: 110 mm, min./max. mould height: 150 mm/300 mm, tie bar distance: 221 mm. 5) Arburg 221-55-250, year of manufacture: 1991, clamping force: 250 kN, shot weight: 32 g/PS, screw diameter: 20 mm, min./max. mould height: 150 mm/300 mm, tie bar distance: 320 mm. 6) 2K injection moulding machine Arburg 221-75-350, year of manufacture: 1993, clamping force: 350 kN, injection pressure: 1,500 bar, shot weight: 38 g/PS, screw diameter: 22 mm, min./max. mould height: 150 mm/300 mm, tie bar distance: 221 mm. Includes 7-8 Arburg dryers, various injection units, AirComp compressor, fluid silicone mixing unit with Arburg control and Scheugenpflug. Documentation available. On-site inspection possible.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, spaudimo jėga: 1 300 kN, Clamping force: 130 t Screw diameter: 40 mm Giodpjwv Hrxjfx Abdel Shot weight: 184 g Tie bar spacing (vertical): 520 mm Tie bar spacing (horizontal): 520 mm Min/Max mould height: 350 mm Opening stroke: 925 mm Shot volume: 201 cm³ Type: Horizontal Drive: Hydraulic + Apex sprue picker robot Core pulls: Yes

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Arburg 720 S 3200-2100 liejimo mašina Pagaminimo metai: 2005 Mašina labai geros techninės būklės, visiškai veikianti ir paruošta iškartiniam darbui pramonėje. Arburg gamykla padidino užspaudimo jėgą iki 3600 kN, po gamyklinio aptarnavimo. Uždarymo agregatas Užspaudimo jėga: 3 600 kN Montavimo plokščių matmenys (aukštis × plotis): 1 040 × 1 040 mm Atstumas tarp kolonų (aukštis × plotis): 720 × 720 mm Minimalus formos aukštis: 300 mm Maksimalus atidarymo plotis: 1 400 mm Liejimo agregatas Sraigto skersmuo: 70 mm Liejimo tūris: 1 078 cm³ Gijdpfx Abex Thw Redol Liejimo svoris: 984 g Liejimo slėgis: 2 000 bar Elektrohidraulinė įranga Siurblio variklio nominali galia: 55 kW Šildytuvų galia: 30,3 kW Matmenys ir svoris Grynasis svoris su valdymo spintele: 17 t

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, spaudimo jėga: 250 kN, varžto skersmuo: 18 mm, darbinio tūrio: 20 cm³, įpurškimo slėgis: 2 500 juosta, injekcijos svoris: 18 g, Bendra informacija Pagaminimo metai: 2001 Valdymas: Selogica Svoris: 2000 kg Matmenys (ilgis × plotis × aukštis): 2,9 × 0,9 × 1,9 m Uždarymo sistema Uždarymo jėga: 25 t Įrankio uždarymo sistema: 250 / … Įrankių plokščių matmenys: 400 × 400 mm Atstumas tarp kolonų: 220 × 220 mm Didžiausias plokščių atstumas: 425 mm Įpurškimo sistema Įpurškimo vienetas: … / 60 Sraigto skersmuo: 18 mm Sraigto L/D santykis: 24,5 Specifinis įpurškimo slėgis: 2500 bar Įpurškimo tūris: 20 ccm Įpurškimo masė: 18 g Išstūmėjas Išstūmimo jėga: 18 kN Gsdpex Tfuyjfx Abdeil Išstūmimo eiga: 95 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Arburg 820S 4000-2100/400 / Production Line with Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection Unit: Screw diameter: 60 mm Shot weight: 723 g Injection pressure: 2500 bar Dosage volume: 792 cc Clamping Unit: Clamping force: 400 t Tie bar spacing: 820x820 mm Platen dimensions: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional Equipment: 2K injection moulding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air valves x 6 Hydraulic core pullers with needle shut-off, controlled by proportional valve x 4 pairs Hot runner controller x 24 Reinforced injection unit – bimetallic Proportional valve on vertical injection unit – precise dosing Machine with six cylinders / accumulators with compressed nitrogen (additional charge for fast operation) Parallel movements Automatic mould height adjustment Screw diameter in vertical injection unit: ⌀40 mm - 184 g/PS Integrated pressure monitoring system by Kistler – mould cavity pressure measurement Original Weber rotary table: highly precise, electrically driven by a servomotor controlled via inverter Rotary table diameter: 1200 mm Rotary table available at extra cost Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: all axes driven electrically by servomotors (X, Y, Z telescopic) Approximate stroke: X - 5000 mm Y - 1400 mm Z - 2000 mm Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and safety housing Robot available at extra cost Dimensions: Weight: 21,000 kg Giodpfx Asx Nhqijbdol Length/Width/Height: 8.00x2.32x4.21 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the selected machine’s technical tests or participate in live technical demonstrations at our company in Łódź. Price: Upon request

Sąlyga: naudotas, Gamybos metai: 2006, Svoris 3400 kg Gisdpsuy Sdtefx Abdel

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Arburg 1500T 3200-1300 e² / Hybrid Machine with Rotary Table Year of manufacture: 2011 Injection Unit: Screw diameter: 60 mm Shot weight: 607 g Injection pressure: 2000 bar Dosage volume: 664 ccm Clamping Unit: Gedpox Nhp Sefx Abdoil Clamping force: 320 t Tie bar spacing: 0x0 mm Platen size: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Hybrid machine: high-speed, energy-efficient, and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Control system with air valve Hydraulic core pull x 3 Control system with hot runner x 13 Injection unit hardened - bimetallic Main motor - servo motor driven by inverter Highly precise rotary table, servo motor-driven, controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to modify the injection unit for vertical operation Dimensions: Weight: 16,080 kg Length/Width/Height: 4.91x2.12x4.62 m All offered machines are started and tested by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: geras (naudotas), Gamybos metai: 1998, Spaudimo jėga: 50 t Varžto skersmuo: 25 mm Atstumas tarp kolonų V: 270 mm Atstumas tarp kolonų H: 270 mm Gedpfx Asxl Hpgsbdjil Tipas: Horizontalus Pavaros tipas: Hidraulinis

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Giedpfox Nhp Ejx Abdsl Control: SELOGICA – touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Hot runner control x 15 Injection unit hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for high-speed operation) ECO – the machine is equipped with a system for adjusting the minimum mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servo motors (electric); C-axis – pneumatic Travel paths (axes): X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt, and protective enclosure Purchase of robot and conveyor belt available for an additional charge Dimensions: Weight: 12,510 kg Length/width/height: 6.57x1.76x2.46 m All offered machines are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: Upon request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Arburg 570S 2200-290/100/100 / Production Line with Wittmann W823 Robot / Operating hours: 20,499 h in automatic mode Year of manufacture: 2016 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Plasticizing volume: 144 cm³ Clamping Unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA – Touchscreen Additional equipment: 3-component high-speed injection molding machine Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 interface Robot interface 6x pneumatic valves 4x hydraulic core pulls, controlled by proportional valves Hot runner control Injection unit hardened – bimetallic Proportional valve on the injection unit – precise injection Machine equipped with two cylinders / compressed nitrogen accumulator (additional charge for fast operation) Machine designed for operation with an electric rotary table. The machine features an inverter for controlling the servomotor of the rotary table and an interface for table connection Parallel movements possible Screw diameter in vertical injection unit: ⌀25 mm – 45 g/PS Screw diameter in lateral injection unit: ⌀25 mm – 45 g/PS Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes driven by servomotors (electric); axes C and movement A Travel distances per axis: X-550, Y-1400 (telescopic), Z-3500 Touch control panel Robot safety package included Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor available at extra charge Dimensions: Giedpox Nhprjfx Abdel Weight: 10,830 kg Length/Width/Height: 5.53x1.77x3.29 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of Manufacture: 2011 Injection Unit: Screw Diameter: 50 mm Shot Weight: 359 g Injection Pressure: 2000 bar Dosing Volume: 392 ccm Clamping Unit: Clamping Force: 200 t Tie Bar Distance: 570x570 mm Platen Size: 795x795 mm Ejector: electric Gjdpfjx Nhplex Abdeil Clamping System: toggle lever Control: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Controller with 12 hot runner zones Injection unit hardened - bimetallic Main motor - servo motor driven by inverter for energy saving Injection unit driven by a servo motor controlled by an inverter Machine equipped with cylinder / battery with compressed nitrogen (additional charge for rapid operation) Central lubrication Parallel movements Arburg Multilift Select robot 6kg transverse Year of manufacture: 03.2011 4-axis robot: 3 axes with electric servo drives; C-axis pneumatic Stroke lengths: X-400, Y-800, Z-1400 Robot with adapter, conveyor belt, and safety housing Robot and conveyor belt available at an additional cost Dimensions: Weight: 8,700 kg Length/Width/Height: 5.58x1.71x2.21 m All machines offered undergo a start-up by our service technicians before sale. It is possible to receive a video of the technical test of the selected machine or participate in live technical testing at our company in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Arburg 570C 2000-350/150 / Production line with lateral Arburg Multilift robot / 2K machine Year of manufacture: 2003 Injection unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2120 bar Dosage volume: 182 ccm Clamping unit: Clamping force: 200 t Tie bar distance: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with lateral Arburg Multilift robot 2K machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner interface Reinforced injection units – bimetallic Proportional valves on injection units – for precise dosing Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS Godpsx Nhn Ujfx Abdsil All offered machines are started up by our service technicians before delivery. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Arburg 520S 1600-400/170 e² / Production line with Geiger robot Year of manufacture: 10.2012 Injection unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Dosage volume: 154 ccm Clamping unit: Clamping force: 160 t Tie bar distance: 520x520 mm Gedpfjx Nhnusx Abdeil Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2-component injection moulding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 5 Control for hot runners x 12 Reinforced injection units – bimetal Machine with two cylinders / batteries with compressed nitrogen (additional charge for high-speed operation) Parallel movements Screw diameter in vertical injection unit: ⌀30 mm - 77 g/PS Built-in Arburg conveyor belt and sorting flap Original Weber rotary table, very precise – electrically driven Purchase of rotary table and robot for an additional charge Dimensions: Weight: 8140 kg Length/Width/Height: 4.81x1.84x3.45 m All offered machines are started up by our service technicians before sale. It is possible to request a video of the technical tests of the selected machine or to participate in live technical tests at our premises in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of manufacture: 09/2011 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosage volume: 144 cm³ Clamping Unit: Clamping force: 160 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional Equipment: 2-component injection moulding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic core pullers controlled by proportional valve x 2 Reinforced injection units – bimetallic Proportional valves on injection units – precise injection Machine with two cylinders / batteries with compressed nitrogen (additional charging for high-speed operation) Parallel movements Screw diameter vertical injection unit: ⌀25 mm - 45 g/PS Original rotary table Rotary table available for purchase at extra cost Giodox Nhnbepfx Abdsl Wittmann W823 Robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servo motors (electric); C-axis and A-movement Travel ranges per axis: X-550, Y-1400 (telescopic), Z-3500 Touch control panel Safety package for robot Robot with adapter, protective housing Robot available for purchase at extra cost Dimensions: Weight: 6720 kg Length/Width/Height: 4.41x1.84x3.20 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Arburg 470C 1500-400 Year of manufacture: 07.2009 Giedex Nhm Dspfx Abdsl Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cc Clamping unit: Clamping force: 150 t Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Core pull control Hardened injection unit - bimetallic Screw diameter can be changed Dimensions: Weight: 4,790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pump/Motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All machines offered are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cc Clamping unit: Clamping force: 150 t Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Core pull control Hardened injection unit - bimetallic Screw diameter can be changed Dimensions: Weight: 4,790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Gedpox Nhmwofx Abdoil Drive: Pump/Motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All machines offered are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Arburg 470C 1500-400 with Wittmann W711 Robot Year of manufacture: 2008 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cm³ Clamping unit: Clamping force: 150 t Tie bar distance: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface 1x air valve Hardened injection unit - bimetallic Proportional valve on injection unit – precise injection Wittmann W711 Robot Year of manufacture: 2007 4-axis robot: 3 axes with servo motors (electric); C axis Travel range of axes: X-420, Y-1200, Z-2000 Touch control panel Robot safety package Robot with adapter Purchase of the robot at an additional charge Giedpox Nhmqefx Abdjl Dimensions: Weight: 4,900 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pump/Motor: 18.5 kW Heating: 9.7 kW Total power: 28.2 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Arburg 470C 1500-675 Year of manufacture: 2004 Injection unit: Screw diameter: 60 mm Shot weight: 427 g Injection pressure: 1440 bar Dosage volume: 508 cc Clamping unit: Clamping force: 150 t Tie-bar spacing: 470x470 mm Platen size: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Giodpfx Asx Nhmkobdsl Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Core pull control Injection unit hardened – bimetallic Parallel movements Dimensions: Weight: 4660 kg Length/Width/Height: 5.00x1.93x2.22 m Drive: Pump/Motor: 30 kW Heating capacity: 14.9 kW Total connected load: 44.9 kW All offered machines are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Arburg 470C 1500-150/150 / 2-component injection moulding machine / Machine in very good technical condition Year of manufacture: 2005 Injection Unit: Screw diameter: 25 mm Shot weight: 49 g Injection pressure: 2500 bar Dosage volume: 54 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 470 x 470 mm Platen size: 685 x 685 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: 2-component machine Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hardened injection unit – bimetallic Proportional valve on the injection unit – precise injection Type of injection unit: Vario – allows for e.g. lateral injection Gjdex Nhmdepfx Abdeil Parallel movements Vertical injection unit – screw diameter fi 25 mm (49 g/PS) It is possible to change the screw diameter in both injection units for the diameters recommended by the manufacturer: 30, 35 mm Dimensions: Weight: 5,700 kg Drive: Pump/motor: 30 kW Heating capacity: 2 x 9.4 kW Total power: 48.8 kW All machines offered are started and checked by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Arburg 470C 1500-400 with Wittmann W721 Robot Year of manufacture: 12/2006 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 470x470 mm Platen size: 650x650 mm Ejector: hydraulic Clamping system: hydraulic Control: SELOGICA - Touchscreen Additional Equipment: Euromap 67 Robot interface Control with air valve 1x hydraulic core pull Injection unit hardened - bimetallic Integrated conveyor belt and sorting flap Wittmann W721 robot Year: 2006 4-axis robot: 3 axes are driven by servo motors (electric); C-axis - pneumatic Axis travel (mm): X-550, Y-1200, Z-3000 Touch control panel Robot safety package Robot with adapter Robot purchase at additional cost Dimensions: Weight: 4900 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pump/motor: 18.5 kW Gijdsx Nhl Tepfx Abdel Heating capacity: 10.2 kW Total power: 28.7 kW All machines on offer are started up by our service technicians prior to sale. A video of the technical tests of the machine selected can be provided or you can participate in live technical tests at our premises in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Arburg 420C 1300-675 with Star sprue picker Year of manufacture: 2002 Injection unit: Screw diameter: 50 mm Shot weight: 297 g Gijdpfx Asx Nhl Hjbdsl Injection pressure: 2080 bar Metering volume: 353 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 420x420 mm Platen size: 605x605 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - bimetal Type of injection unit: Vario – This allows, for example, the use of the injection unit for side injection Covers on the operator side open automatically Dimensions: Weight: 4330 kg Length/Width/Height: 4.80x1.64x2.08 m Drive: Pump/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All machines offered are started and tested by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Arburg 520S 1300-800 / Machine in very good technical condition Year of manufacture: 2008 Injection Unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Dosage volume: 392 cc Clamping Unit: Clamping force: 130 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air valve x 2 Injection unit hardened - bimetallic The machine has been regularly serviced by authorized Arburg service in Germany Dimensions: Weight: 6450 kg Length/Width/Height: 4.81x1.57x2.19 m Drive: Pump/Motor: 30 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Gedpfxjx Nhlyj Abdeil Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Arburg 470S 1100-400 with Wittmann W711 Robot Year of manufacture: 2008 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 ccm Clamping Unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Platen size: 637x637 mm Ejector: hydraulic Clamping system: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 8 Injection unit hardened – bimetallic Proportional valve on injection unit – precise injection Conveyor belt integrated with machine control Built-in sorting flap Screw diameter can be changed Wittmann W711 Robot Year of manufacture: 2008 4-axis robot: 3 axes driven by servomotors (electric): X, Y, Z; C axis – pneumatic Axis travel: X-420, Y-1200, Z-2000 Touch control panel Robot with adapter Robot purchase at an additional cost Dimensions: Gedpfx Asx Nhltsbdoil Weight: 5,200 kg Length/Width/Height: 4.56x1.52x2.13 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 Injection Unit: Screw diameter: 35 mm Shot weight: 117 g Injection pressure: 2500 bar Dosage volume: 139 cc Clamping Unit: Clamping force: 130 t Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Controller with hot runner zones x 6 Gedpfsx Nhlmjx Abdjil Hardened injection unit – bimetallic Proportional valve on the injection unit – precise injection Integrated system for quality pressure control from Sensor Kistler – tool pressure measurement Injection unit type: Vario – enables use of the unit e.g. for side injection A new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/Width/Height: 4.45 x 1.49 x 2.17 m Drive: Pump/motor: 22 kW Heating capacity: 10.2 kW Total power: 32.2 kW All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Arburg 470H 1000-400 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 2010 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2,000 bar Dosage volume: 201 cc Clamping Unit: Clamping force: 100 t Tie bar distance: 470x470 mm Platen dimensions: 637x637 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving The injection unit is driven by a servo motor controlled by an inverter Machine with cylinder / tank with compressed nitrogen (additional charge for fast operation) Central lubrication Integrated sorting flap Godex Nhlgjpfx Abdeil Arburg Multilift Select robot, 6 kg crosswise Year of manufacture: 09.2010 4-axis robot: 3 axes are driven by servo motors (electric); C-axis is pneumatic Axis travel: X-400, Y-600, Z-1800 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an additional charge Dimensions: Weight: 5,180 kg Length/Width/Height: 4.40x1.56x2.02 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: upon request