Mobiliojo Purškimo Sienos pirkti naudotą (1 263)

Gamybos metai: 2020, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: PB-VB 1555, Įranga: kabina, VENUS Paint Booth-Dryer, Model PB-VB 1555 - Internal dimensions: 15.0 x 5.0 x 5.0 m - Walls coated with removable white protective lacquer - Wall thermal insulation (mineral wool, 40 mm) - Motorised aluminum entrance gates (4.8 x 5.0 m), 2 units - Service doors, 3 units - Operator support grid platforms, load capacity 1,100 kg/m2 Pjdpfxjt S Upns Afword - Vertical ventilation, air descent velocity approx. 0.3 m/s - Supply air ventilation and heating units (capacity 45,000 m3/h, heating power/motor output 500 / 18.5 kW), heating medium: gas or heating oil, 2 units - Exhaust extraction units (capacity 45,000 m3/h, motor output 18.5 kW), 2 units - Rotary heat recovery exchangers (efficiency >50%) with support structures, 2 units Heating output with rotary heat exchangers: 2 x 250 kW - Fresh air filtration: pre-filters + ceiling filters (approx. 67 m2) - Two-stage air filtration on exhaust: 1. Inertial cardboard floor filters (approx. 45 m2) – pre-filtration; 2. Glass fibre filters in extraction units – fine filtration - Overhead main lighting, 20 units - Additional side lighting, 17 units - Control cabinet

Sąlyga: naudotas, Naudotas APV Anhydro modelis PSBD 58 nerūdijančio plieno purškiamojo džiovintuvo įrenginys. Vandens išgaravimo našumas apie 50 kg/val. (priklauso nuo produkto) esant įėjimo/išėjimo temperatūroms 600/140°C. Džiovinimo kamera apie 1600 mm vidinis skersmuo x 1800 mm cilindrinis aukštis x 1500 mm kūginis aukštis. Kamera turi saugos plėštinę plokštę, tačiau ji neprijungta. Išorė izoliuota ir padengta nerūdijančio plieno lakštu. Apžiūros durelės 450 x 550 mm. Komplektacijoje yra (1) viršuje montuojamas Anhydro purkštukas su sraigtiniu oro atomizatoriumi (galėtų būti naudojamas ir rotacinis atomizatorius, bet komplektacijoje nėra). Įrenginys turi dviejų zonų elektrinį oro šildytuvą, Herding anglinio plieno filtrą, cikloną ir ventiliatorių. Pridedamas elektros skydas su integruotu valdymo pultu. Įdiegta PLC valdymo sistema. Prjdpfxexyxmte Afwjd

Sąlyga: naujas, Gamybos metai: 2025, TM2015 Spray Booth Working dimensions (mm): 2000 (W) x 1500 (H) x 450 (D) Overall dimensions (mm): 2200 (W) x 2250 (H) Technical specifications: • Fan power: 1.5 kW, • Capacity: 7600 m³/h, • Pressure: 950 Pa, • Right or left air discharge, • 3-stage air filtration system, • Filtration efficiency: 98%, • Explosion-proof Ex fan, • IP 66 control panel, • IP 65 hermetically sealed lighting. Our booths are distinguished by very high manufacturing quality, operational safety, and the ability to tailor booth specifications to your existing facility. We provide expert advice on selecting spray booths, dust extraction systems, exhaust systems, and industrial heat recovery units. CHOOSE BUMEXBUMEX SP. Z O.O. - Very high quality of machines offered on the market. - Professional consultation and service. - Warranty. - Warranty and post-warranty service. - Complete technical documentation. Psded S N S Hopfx Afwjrd - 100% customer satisfaction. - All BUMEX SP. Z O.O. brand products come with a CE certificate. We offer in-house transport – prices are negotiated individually for each offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, darbinis plotis: 1 380 mm, bendras svoris: 80 kg, tuščias svoris: 80 kg, darbinė masė: 80 kg, Aukštos kokybės sieniniai (šlaitiniai) ventiliatoriai, kurių matmenys 1380 x 1380 x 450 mm, našumas – 44 500 m³/val. Variklio galia: 1,1 kW, trifazis. Šis ištraukimo ventiliatorius tinkamas naudoti pramonėje arba žemės ūkyje, dažnai naudojamas kiaulidėse, paukštynuose, šiltnamiuose ar gamybinėse patalpose. • Įrenginys užtikrina efektyvų vėdinimą, šalina pasenusį orą, perteklinę drėgmę ir nemalonius kvapus. • Tai yra „push-pull“ tipo ventiliatorius, t. y. gali veikti tiek traukdamas, tiek stumdamas orą. • Konstrukcija iš cinkuotos lakštinės skardos su apsauginiu tinkleliu užtikrina patvarumą ir darbo saugumą. Prjdpfjxuvatex Afwed • Didelio skersmens mentės ir galingas variklis užtikrina didelį oro srauto efektyvumą.

Gamybos metai: 2025, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 7 000 mm, bendras plotis: 4 000 mm, bendras aukštis: 3 500 mm, durų angos plotis: 3 450 mm, durų angos aukštis: 2 780 mm, vidinis aukštis: 2 800 mm, vidinis ilgis: 6 920 mm, vidinis plotis: 3 920 mm, tūrio srautas: 30 000 m³/val, mašinos/transporto priemonės numeris: TEC/PR/15, PRISMATEC 15 reprezintă o nouă generație de cabine de vopsire — combinând precizia mecanică, designul modular european și controlul inteligent al procesului bazat pe inteligență artificială (AI). Dezvoltată pentru medii industriale și profesionale de finisare, asigură un proces stabil, eficiență energetică excepțională și calitate constantă a suprafeței. Fiecare sistem este complet pregătit pentru Industry 4.0, cu integrare nativă în mediile ERP / MES / QMS / SCADA. Caracteristici principale - Construcție & Izolație: panouri tip sandwich PIR (pereți și tavan), cadru din oțel galvanizat de 1,5 mm, uși și panouri din aluminiu, podea și platformă cu grilaj ridicat (300 mm) pentru flux de aer optim și durabilitate structurală. - Ventilație: două ventilatoare centrifugale NICOTRA-GEBHARDT, asigurând presiune echilibrată și distribuție uniformă a aerului în cabină. Echipate cu motoare cuprinse între 7,5 kW și 11 kW, debit total de la 25.000 m³/h până la 35.000 m³/h la o presiune statică de 800 Pa (pentru ambele sisteme, alimentare și evacuare). - Control inteligent (NVIDIA AI-Edge): HMI industrial de 14″, algoritmi AI în timp real pentru controlul temperaturii, presiunii și fluxului de aer; mod ECO Gun-Idle, diagnosticare predictivă, jurnalizare completă a datelor și compatibilitate open API (REST) prin Modbus TCP / OPC UA / MQTT. Integrare fără întreruperi cu sistemele ERP, MES și QMS pentru trasabilitate și mentenanță predictivă. - Monitorizare termică (opțional): imagistică infraroșu bazată pe AI cu recunoaștere de obiecte (YOLO), cartografiere termică automată și profiluri de întărire adaptive pentru consum redus de energie. - Iluminare: sistem LED Programabil Daylight cu control precis al CRI și al intensității luminoase, corpuri laterale și de tavan la 45° pentru iluminare fără umbre. - Sistem de încălzire: schimbător de căldură din oțel inoxidabil (versiunea pe ulei) cu surse opționale pe gaz / ulei / electric; timp de încălzire la 60 °C ≈ 4–5 min; economii de până la 30% prin recuperare termică bazată pe AI. - Detalii de design: sistem de închidere ascuns (fără părți proeminente) pentru curățare ușoară, aplicare de folie și întreținere minimă. Gamă de modele PRISMATEC 15/18/22 (7×4 m) – configurație compactă, de înaltă eficiență pentru ateliere și aplicații industriale; control complet AI-Edge. LS22 / Seria Custom – disponibil la cerere pentru integrare robotică, transportoare sau control termic pe mai multe zone. Conectivitate & Raportare Integrare directă ERP / MES / QMS (open API). Rapoarte automate de producție, energie și calitate cu panouri OEE / KPI. Diagnosticare la distanță, vizualizare de date și management cloud prin TEC NOVA AI Cloud. Conformitate & Certificare Producție complet europeană, conform standardelor Industry 4.0. Calitatea structurală și a sudurii certificată conform EN 1090-1 și EN ISO 3834-3 (TÜV Thüringen Polska). Prjdpfx Asxv D Sgofwod Opțiuni disponibile - Monitorizare termică cu infraroșu + AI - Analize avansate & suport tehnic la distanță - Presetări pentru vopsele pe bază de apă - Mod ECO Gun-Idle - Integrare robotică sau pe transportor - Control termic pe zone multiple (Seria Custom)

Sąlyga: labai geros būklės (naudotas), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: For sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of the water protection classes of enclosures or components. With optional equipment, testing according to IPX9K (high-pressure/steam-jet), ISO 20653, and other standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, according to standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible protection classes & tests The SWT system can cover a wide range of tests (depending on configuration): Basic configuration: IPX3 / IPX4 tests (spraying or all-direction splash water). Optional: Higher protection classes up to IPX5 / IPX6 (water jets), and — with suitable high-pressure equipment — up to IPX9 or IPX9K. Tests are conducted according to standards such as DIN EN 60529 (for IP protection classes) and ISO 20653 (e.g. for vehicle or outdoor applications), depending on requirements and field of application. Typical areas of application Typical application scenarios for such a test chamber include: Electronic devices or enclosures intended for outdoor use or humid environments, e.g. outdoor lighting, control enclosures, power units, panels. Components for vehicles or machinery, especially when exposed to rain, splash water, or high-pressure cleaning (e.g. construction machinery, e-bike or vehicle parts). Batteries or electrical components that must be tested for water resistance – e.g. in the automotive industry or for e-mobility. Technical Data: Suitable protection classes: IPX3 / IPX4 Oscillating pipe radius (for IPX3/4 tests): 200 mm as standard (for SWT 1000), optionally up to 400 mm. Test chamber (interior) Internal dimensions: Approx. 1,000 × 1,015 × 1,000 mm (W×H×D) Prjdjxzprcspfx Afwsd Operation / control: Web panel or GUI for programming and controlling the tests. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Sąlyga: naudotas, Gamybos metai: 2018, Technical data: Podpfswf U Ruox Afwerd Processes: Washing, Rinsing, Drying Power supply: 3x400 VAC +/- 5%, 50Hz+N+PE Compressed air connection: 6 bar Power consumption: 76 kVA Machine at a height of 1.6 m: n/a Vibrations: none Maximum payload: 200 kg Washing tank: 900 l Rinsing tank: 900 l Oil separator: 200 l

Sąlyga: geras (naudotas), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank We are offering a used partition wall manufactured by Schulte for sale. Psdpfxog Urd Ae Afwsrd Technical specifications for the partition wall: Manufacturer: Schulte The partition wall is suitable for a shelving depth of 250 mm. Scope of delivery includes: 01x partition wall, used Material finish: galvanized Overall width: approx. 230 mm Weight / piece: approx. 0.361 kg Partition wall (height): approx. 150 mm The partition wall is used and may show slight signs of dirt, dents, scratches, etc. Our range of services at a glance: (Prices upon request) Assembly and installation Our general assembly conditions apply Rack inspection Racking inspection according to DIN EN 15635 performed in compliance with BGR 234 visual inspection requirements for all racking systems Delivery with our own fleet (unloading not included)

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Pilnai komplektuota linija, sudaryta iš: Dvijų bėgių išsikišančio konvejerio su dviem taškinėmis juostos atramomis, kėlimo ir sukimosi įrenginiu; Dažymo robotų kabina su visos oro recirkuliacijos ir automatine pirminių filtrų keitimo sistema; Aukšto slėgio drėkintuvas dažymo kabinai ir džiovinimo kamerai; Langų dažymo robotinė sistema su antgalių valymo įtaisu, automatine spalvos keitimo sistema (3 nepriklausomos), elektrostatine saugos sistema, dažų srauto matuokliu; Džiovinimo tunelis su LDP sistema ir ašiniais ventiliatoriais; Valdymo sistema su duomenų sąsaja ir duomenų nuskaitymo įrenginiu. Linija supakuota transportavimui. Ji buvo anksčiau sumontuota, tačiau niekada nepaleista eksploatacijai. Pedpfx Afjxw Ux Hjwjrd

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2012, Kabinų purškimo įrenginys (KSA) Gamintojas: HEGE GmbH, pagaminta 2012 m., sudėtis: Purškimo kabinos 1+2, tipas: 02-1000, ilgis = 5355 mm; plotis = 2900 mm; aukštis = 2850 mm. Vėsinimo zona 1, tipas: 04-1000 / 04-2000, ilgis = 3740 mm; plotis = 3200 mm; aukštis = 3800 mm. Purškimo kabinos 3+4, tipas: 02-3000, ilgis = 4605 mm; plotis = 2900 mm; aukštis = 2850 mm. Vėsinimo zona 2, tipas: 04-3000 / 04-4000, ilgis = 4675 mm; plotis = 3200 mm; aukštis = 3800 mm. Pasyvus guolių laikiklis, tipas: 08-000d, ilgis = 3266 mm; plotis = 2086 mm; aukštis = 2500 mm. Įskaičiuota: šiluminis papildomas deginimas ENVIROTEC CNV 5.0GH, pagaminta 2012 m., serijos nr.: ST7190, įskaitant šilumos rekuperatorių lako pašildymui (ištraukimo dujos sudeginamos). Prodpfoxvpi Rjx Afwsd

Sąlyga: naujas, Gamybos metai: 2024, Rehnen Spray Table Lacky Advantages: Thanks to its 360° rotatable arms, it always provides optimal support and a stable surface for all workpieces. Easily adjustable in height and 360° rotatable for fast, efficient working. Due to its protective covers, the arms remain movable even after intensive use. Pjdpfx Afolrrrmsword Height (mm): 950–1250 Width (mm): 600–1120 Length (mm): 700–1260 Diagonal (mm): 900–1680 Load capacity (kg): 100 Location: available immediately from stock.

Sąlyga: labai geros būklės (naudotas), Weiss Type: SWT 200/400-S Weiss spray and splash water test chamber Used to test the ingress of water into enclosures. When connected to a timer, the test cycle can be automated with an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 Part 1 and EN 60529 for tests in accordance with protection classes IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be reduced to a minimum. Features Glass door with wiper Pneumatic drive for the oscillating tube Adjustable oscillation angle Interchangeable oscillating tubes Swiveling and interchangeable nozzle holders Adjustable water flow rate and measurement Control of test duration Data for mechanical loading Maximum load with test sample (evenly distributed) Permissible test sample weight for carrier (total): 25 kg Spray radius: 200 mm / 400 mm Data for IP protection class tests Oscillation speed: approx. 60°/s Oscillation angle IPX3: approx. ±60° Predpfx Afexxuytowsd Oscillation angle IPX4: approx. ±180° -10° Dimensions: External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm External (D x W x H): approx. 1000 x 1000 x 1900 mm Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 1.5 kW Rated current: 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Sąlyga: geras (naudotas), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank We offer you here a used partition wall from the manufacturer SSI Schäfer for sale. Technical specifications of the partition wall: Manufacturer: SSI Schäfer Model designation: TRF4410 The partition wall is suitable for a shelf depth of 400 mm. Included in the scope of delivery: 01x partition wall, used Material finish: galvanized Total width: approx. 365 mm Weight per piece: approx. 0.202 kg Partition wall (height): approx. 100 mm The partition wall is used and may show slight dirt, dents, scratches, or similar signs of wear. Our services at a glance: (Prices on request) Assembly, installation Our general assembly conditions apply. Racking inspection Pedjg T H Dzepfx Afwerd Racking inspection according to DIN EN 15635 performed according to the requirements of BGR 234 visual inspection for all racking systems. Delivery with our own fleet (without unloading)

Sąlyga: geras (naudotas), Weiss Model: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber internal dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Fields of application: Corrosion testing: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier: +75°C Temperature constancy: Temporal temperature deviation: ±K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Podpfx Afjudvg Rswerd Scope of delivery: (See picture) (Subject to modifications and errors in technical data. All details without guarantee!) For further questions, please do not hesitate to contact us by phone.

Sąlyga: geras (naudotas), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Predeg Urndjpfx Afwod We are offering 50 used dividers from manufacturer SSI Schäfer for sale. Including delivery – nationwide within Germany – (excluding island delivery) Technical data for the divider: Manufacturer: SSI Schäfer Model designation: TRF4410 The dividers are suitable for a shelf depth of 400 mm. Scope of delivery includes: 50x divider, used Material finish: galvanized Total width: approx. 365 mm Weight per piece: approx. 0.202 kg Divider (height): approx. 100 mm The dividers are used and may show minor soiling, dents, scratches, or similar signs of wear. Overview of our services: (Prices on request) Assembly, installation Please observe our general assembly conditions Racking inspection Racking inspection according to DIN EN 15635, conducted in compliance with BGR 234 visual inspection requirements for all racking systems Delivery with our own fleet (unloading not included)

Sąlyga: labai geros būklės (naudotas), Weiss Model: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Fields of application: Corrosion testing: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier: +75°C Temperature stability: The temporal temperature deviation is ±K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard atmosphere (ventilation): DIN 50014 Psdpfx Aow Hz Trsfword Weight: 180 kg Condition: used Scope of delivery: (See image) (Specifications and data may be subject to change and errors excepted!) Should you have any further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Type: SAL 1000-FL PLC / V.715.362.520 For sale is a used VLM salt spray test chamber, type SAL 1000-FL PLC, ideal for industrial corrosion testing according to international standards (DIN EN ISO 9227, ASTM B117). Perfectly suited for laboratory and production environments to test materials, coatings, and components under controlled corrosive conditions. Features: - Robust stainless steel frame construction, max. load capacity 450 kg - Precise control and reproducible test results - Versatile applications for salt spray, condensation water, and ventilation tests Technical details: - Exterior material: Stainless steel 1.4301, powder-coated (special version) - Test chamber material: Stainless steel, ECTFE-coated - Max. test chamber temperature: +80 °C - Temperature stability: ±0.3 °K, over time ±0.1 °C - Process control: PLC with touchscreen, LED display - Interface: Ethernet - Water quality: demineralized, max. conductivity 20 µS/cm - Humidifier water consumption: approx. 0.5 l/h (depending on program) - Water supply pressure: 2–4 bar - Compressed air consumption: approx. 20 m³/h - Compressed air connection: 6–8 bar - External dimensions (W x D x H): 2160 x 670 x 1090 mm incl. base cabinet: 2160 x 670 x 1890 mm - Internal test chamber dimensions (W x D x H) / volume: 1400 x 605 x 920 mm / 1040 l - Max. load on sample rod: 40 kg - Electrical connection: 400 V / 50 Hz / 4000 W - Weight (empty): 350 kg - Condition: used - Scope of delivery: (see image) (Specifications and technical details are subject to change and errors!) We are happy to answer further questions by phone. Prjdpfjxnyqvex Afwsd

Sąlyga: labai geros būklės (naudotas), Here we offer you a Köhler salt spray chamber. Köhler salt spray chamber corrosion test chamber Köhler salt spray chamber HKT 500 Operation via touch panel Internal dimensions W x D x H (without hood) 1880 x 840 x 1210 mm Test chamber volume: 500 l Temperature range: chamber ambient temperature up to 50°C Power supply: 230V 1P/N/50Hz 3000W Type: HKT 500 WTG Prjdpfx Aen Arqdsfwjd Weight: 400 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Cabinet This unit is used to test the ingress of water into housings. In conjunction with a timer, the test cycle can be automated with an adjustable testing duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for tests based on protection classes IPX3 and IPX4. The integrated water recirculation system minimizes water consumption. Features Glass door with wiper Pneumatic drive for the oscillating tube Adjustable oscillation angle Interchangeable oscillating tubes Swiveling and replaceable nozzle holders Adjustable and measurable water flow rate Control of test duration Mechanical Load Data Max. load capacity (evenly distributed over surface) Permitted specimen weight for sample carrier (total): 25 kg Spray radius: 200 mm / 400 mm Data for IP protection class tests Oscillation speed: approx. 60°/s Oscillation angle IPX3: approx. ±60° Oscillation angle IPX4: approx. ±180° -10° Predpfevzz A Rox Afwsd Dimensions: External dimensions incl. control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 1.5 kW Rated current: 6.0 A Weight: 375 kg Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Liebisch Type: S 1000 A-TR / 42016211 Chest-type chamber with 1,000-liter test volume for salt spray testing. Constamatic® TR This series features automatically controlled chest chambers of the type A-TR. The integrated device control is operated via a touchscreen. All functions are displayed through an intuitive touchscreen user interface. Technical Specifications: Device type: S 1000 A-TR External dimensions (W x D x H in mm): 2600 x 1120 x 1210 Internal test area dimensions (W x D x H in mm): 1535/1425 x 800/780 x 660/650 Maximum sample holder load: 10 kg per level, 10 kg total Operating voltage: 230 V +6/-10% Power rating S: 2700 W Humidification control range S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device protection: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1,000 liters Test solution reservoir: approx. / 150 liters Test solution consumption/hour: approx. / 0.7–1.0 liters Water fill volume (floor sump) KON: 15 liters Pedpfx Afewf Dh Newerd Weight: 450 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data; information is non-binding!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Here we are offering a Mega Electronics conveyor spray processing machine. Mega Electronics Conveyor Spray Processing Machine Conveyor Spray Processing Machine FAPC 3000 The new FAPC series was developed to work with the latest developer, etching, and stripping chemistry for the production of printed circuit boards, metal signs, and chemically milled metal components. The FAPC 3000 can handle panels with a width of up to 300 mm. Process chamber: 450 mm Rinse chamber: 280 mm Spray bars – Top: 4 in process chamber, 1 in rinse chamber Spray bars – Bottom: 4 in process chamber, 1 in rinse chamber Nozzle type: Poly v-jet – removable with ¼ turn Nozzles per pipe: 3 + 4 for process, 4 for rinsing Nozzles: Precisely mounted for perfect alignment. Adjustable, compact distribution systems. Flow/pressure control: Adjustable across the full range for both top and bottom. Conveyor speed control: High torque. AC drive motor system powered by a precision inverter with digital displays, for precise operator reference. Speed range: 45 mm – 1.6 m / min Temperature range: Ambient to 50°C ±1°C Temperature controller: Digital Liquid level sensors: For heater and pump Manual reset for over-temperature protection Voltage: 220 / 240V 50Hz (13A plug) Prjdpfjd R Trkjx Afwed Dimensions: Height: 670 mm Depth: 670 mm Length: 1430 mm Incl. drip tray Type: FAPC 3000 Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) We are happy to answer further questions by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Type: VBT 03/500 Air-cooled Temperature test chest with spray device Technical Description: Data for temperature tests without water: Temperature range: -30°C to +80°C Temperature deviation in steady-state condition according to IEC 60068-3-5, depending on test chamber temperature: Prsdswc Nvgjpfx Afwod timewise ± 1 K Temperature change rate according to IEC 60068-3-5: Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for temperature tests with water: Temperature range: +5°C to +80°C Possible water level: -10 mm to 540 mm Water level = -10 mm: The water level is below the sample rack Water level = 0 mm: Water level is at the upper edge of the sample rack Data for standard spray device: Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B: Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume per additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-tempering: Volume: approx. 2000 L Temperature range for pre-tempering: +5°C to +40°C Temperature change duration: Cooling from +18°C to +5°C: approx. 15 h Heating from +15°C to +40°C: approx. 10 h Data for installation and operation: Test chamber: width 1120 mm, depth 840 mm, height 540 mm Housing: width 2700 mm, depth 1300 mm, height 1575 mm Water tank: width 1100 mm, depth 800 mm, height 2200 mm Feedthroughs: 1 feedthrough Ø 50 mm, installed on left Test chamber volume: approx. 500 liters Refrigerant: R-404a Electrical connection: Nominal voltage: 3/N/PE AC 400V ± 10% 50Hz Nominal power: approx. 26 kW Nominal current: approx. 44.0 A (neutral loaded) Fuse protection: 63 A gG, provided by customer Weight: approx. 890 kg net For your safety as a buyer, the following information: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to technical modifications and errors in data and specifications!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Podpjw Strcsfx Afwjrd Tipas: SC/KWT 450 Druskos purškimo kamera Techniniai duomenys: Bandymo kamera: 450 litrų Maksimali apkrova: 100 kg Druskos tirpalo talpa: 180 litrų Išoriniai matmenys: aukštis 920 mm, plotis 1930 mm, gylis 800 mm Bandymo kameros matmenys: aukštis 740 mm, plotis 850 mm, gylis 570 mm Naudojimo sritys: Korozijos bandymai: Druskos purškimo testas: kambario temp. iki +50°C Kondensato vandens testas: kambario temp. iki +45°C Drėkintuvas +75°C Temperatūros pastovumas Laikinis temperatūros nuokrypis ±K. Įtampa: 1/N/PE AC 230V ±10% 50Hz Nominali galia: 2,0 kW; nominali srovė: 8,7 A Kombinacija: Druskos purškimo testas SS: DIN 50021 Kondensato vandens testas KFW: DIN 50017 Normali aplinka (vėdinimas): DIN 50014 Svoris: 180 kg Būklė: naudota Komplektacija: (žr. nuotrauką) (Techninių duomenų pakeitimai ir klaidos galimi, informacija nėra galutinė!) Dėl papildomos informacijos prašome kreiptis telefonu.

Sąlyga: labai geros būklės (naudotas), Here we offer you a Köhler salt spray chamber. Salt spray chambers: - Versatile testing capabilities from salt spray tests to fully automatic cyclic tests - Easy operation via graphical menu navigation - Custom configurations for a wide range of applications - Simple operation via touch panel Internal dimensions (W x D x H, without hood): 1080 x 675 x 580 mm External dimensions (W x D x H): 1940 x 900 x 1220 mm Test chamber volume: 500 liters Chamber temperature: Ambient +5 to 60°C Humidifier temperature: Ambient +5 to 75°C Power supply: 230V, 1-phase, 50/60Hz, 2000W Compressed air: 4.5 – 8.0 bar / 3 Nm³/h Brine tank capacity: 140 liters Construction: Stainless steel Fully overhauled and retrofitted with Comfort control system - Replacement of all electrical components - Replacement of all hose connections Type: HK 500 Prsdpsnr Hi Sefx Afwod Weight: 400 kg Condition: Used Scope of delivery: (See image) (Specifications subject to change or error!) Feel free to contact us by phone for any further questions.

Sąlyga: geras (naudotas), Köhler Model: HKS 1500 The Köhler HKS 1500 salt spray chamber is an industrial testing device designed for corrosion tests in accordance with international standards such as ISO 9227 (NSS, AASS, CASS). It is mainly used in the automotive and metal industries to test the resistance of materials and coatings against corrosive environments. Technical Features Model: Köhler HKS 1500 Test chamber volume: approx. 1000 litres Chamber type: Front- or top-loading Control: Touch panel for easy operation Temperature range: Ambient temperature up to approx. 50°C Materials: Corrosion-resistant internal lining, e.g. polypropylene Standards: DIN EN ISO 9227, VDA 233-102, DIN EN ISO 11997-3 This chamber allows both standard salt spray testing and cyclic corrosion tests, and can be individually adapted to specific test requirements. Salt Spray Cabinet Technical Data: Test chamber material: Polypropylene RT - +55°C Podpfx Aowit Erjfwerd Test chamber temperature range / Salt spray heating / Salt spray indirect via chamber walls Temperature range – Condensation water RT - +50°C Temperature range humidifier RT - +75°C Heating indirect via chamber walls. Temperature consistency +/- 1.0 K Temperature control digital, resolution 0.1°C (with plain text display) Digital regulation, heating activation via electronic relays without mains interference Salt solution tank: approx. 200 h continuous spraying or external Humidifier reservoir: automatic filling Mist generation: dual-substance nozzle made of acrylic glass Air flow rate: 3.0 m³/h Precipitation rate controlled by electronic dosing pump Dimensions: Internal: Width 1030 mm, Depth 880 mm, Height 1100 mm External: Width 1200 mm, Depth 1000 mm, Height 2080 mm Electrical Connection: Nominal voltage: 400 V 3P/N 50 Hz Max. power: 9800 W Connected load: 3.0 kVA (Salt spray) (Condensation water) 2.0 kVA Compressed air connection min. 4.5 bar max. 8.0 bar Water connection (DI water) min. 2.0 bar max. 6.0 bar Disposal: Fog drain NW 32, condensate drain NW 32 Weight: 450 kg Condition: used Scope of delivery: (see picture) Technical details subject to change and errors excepted! For further questions please don't hesitate to contact us by phone.