Krauss Maffei Km 150 520 C1 pirkti naudotą (219)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 100 kN, varžto skersmuo: 40 mm, tarpas tarp stulpų: 470 mm, darbinio tūrio: 217 cm³, įpurškimo slėgis: 2 377 juosta, Mašina buvo iš dalies atnaujinta ir yra iš karto paruošta eksploatacijai! Uždarymo pusė buvo visiškai naujai sandarinta ir sumontuotos dvi beveik naujos sijos! TECHNINĖ INFORMACIJA Uždarymo jėga: 1 100 kN Sraigto skersmuo: 40 mm Atstumas tarp kolonų: 470 mm Smūgio tūris: 217 cm³ Išstūmimo jėga: 22 000 N Išstūmimo eiga: 150 mm Praėjimo plotis: 900 mm Įpurškimo slėgis: 2 377 bar Atidarymo eiga: 600 mm Plokštės ilgis: 770 mm Plokštės plotis: 745 mm Minimali montavimo aukštis: 300 mm Maksimalus plokščių atstumas: 900 mm MAŠINOS DUOMENYS Matmenys ir svoris Matmenys (I x P x A): 4 400 x 1 500 x 2 120 mm Bendras svoris: 6 000 kg Įeinančios srovės tipas: trifazė Cjdpfsxzfg Nsx Af Tepu Įeinanti dažnis: 50 Hz Įeinanti įtampa: 400 V ĮRANGA Dokumentacija / Vadovas Ekrano tekstas vokiečių k. CEE kištukinis lizdas 16 A CEE kištukinis lizdas 32 A Hidraulinė šerdies trauka 2x Oro vožtuvas mobilus WAP Niveliavimo elementai EUROMAP 12 sąsaja Schuko lizdas 10 A Pastaba: Mašina parduodama be medžiagų bunkerio ir vandens akumuliatoriaus.

Sąlyga: naudotas, Gamybos metai: 2003, spaudimo jėga: 1 500 kN, Įranga: dokumentacija / vadovas, Liejimo mašina KM 150-700/C2 Užspaudimo blokas 1. Užspaudimo jėga: 1500 kN 2. Plokštelių dydis (h × v): 780 × 790 mm 3. Formos atidarymo eiga: 600 mm 4. Atstumas tarp kolonų (h × v): 500 × 500 mm 5. Minimalus įrankio montavimo aukštis: 300 mm 6. Išstūmiklio eiga: 150 mm 7. Karšto kanalo zonų skaičius: 12 8. Pneumatinių vožtuvų kaiščių valdymas: 1 vnt. Įpurškimo blokas Cpodpfx Ajyfm Ahjf Tou 1. Sraigto skersmuo: 45 mm 2. Įpurškimo slėgis: 2336 bar 3. Didžiausias šūvio tūris: 305 cm³ 4. Didžiausias šūvio svoris (PS): 278 g 5. Šerdys: 2× hidraulinė grandinė (BAP) 6. Sraigto ilgis/skersmuo santykis: 22

Gamybos metai: 2001, Sąlyga: paruoštas naudoti (naudotas), Šis "Krauss Maffei 125-520 C1" pagamintas 2001 m. Jame yra MC4 valdiklis, "Euromap Interface 12" ir 50 mm skersmens sraigtas. Didžiausias slėgis 1521 bar, o įpurškimo tūris - 340 cm³, todėl idealiai tinka tikslioms liejimo užduotims atlikti. Susisiekite su mumis ir gaukite daugiau informacijos. Mašinos privalumai Techninės mašinos privalumai • Sraigto skersmuo: 50 mm / maks. Slėgis: 1521 bar / maks. Įpurškimo tūris: 340 cm³ Cpedpfx Afsyary Ue Tju • „euromap“ sąsaja: 12 / hidrauliniai įrenginiai: 1 / oro įrenginiai: 1 / karštų purkštukų zonos: 1

Gamybos metai: 2000, Sąlyga: paruoštas naudoti (naudotas), Šis "Krauss Maffei 110-520 C1" pagamintas 2000 m. Jame sumontuotas MC4 valdiklis, "Euromap Interface 12" ir hidraulinis agregatas. Jo sraigto skersmuo 45 mm, didžiausias slėgis 1878 bar, o įpurškimo tūris 275 cm³. Apsvarstykite galimybę įsigyti šią "Krauss Maffei 110-520 C1" hidraulinę įpurškimo mašiną. Susisiekite su mumis dėl išsamesnės informacijos. Papildoma įranga Cpodpfxjyaryuo Af Tsu • „Euromap“ sąsaja: 12 / Hidrauliniai įrenginiai: 1 Mašinos privalumai Techninės mašinos privalumai • Maks. Slėgis: 1878 bar / maks. įpurškimo tūris: 275 cm³ • Karštųjų purkštukų zonos: 1 / sraigto skersmuo: 45 mm

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, Used injection moulding machine direct from the manufacturer! As the manufacturer KraussMaffei, we offer one of our pre-owned injection moulding machines for sale here. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5000 kN - Distance between tie bars (h x v): 900 x 800 mm - Maximum mould opening distance: 1170 mm - Minimum mould installation height: 480 mm - Opening stroke of platen: 1650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (reverse: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1742 bar - Injection volume: 1953 cm³ - Shot weight for PS: 1777 g - Injection rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical parameters - Pump connected load: 90 kW Cpodpfsnh Rnujx Af Tju - Heating capacity: 44 kW Weight & Dimensions - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m As standard, we supply this machine in fully functional, basic condition. Additionally, as the original manufacturer, we can provide various options depending on individual requirements, such as: - Energy optimisation upgrades - Possible integration with KraussMaffei digital products - Plasticising unit conversions - Optional: organisation and handling of delivery (not included in the price) - Optional: setup and commissioning (not included in the price) With us, you benefit from first-class service and also have the option to purchase desired spare part packages for wear parts—ensuring seamless production with your newly acquired used machine. Don’t hesitate to get in touch with your enquiry today!

Sąlyga: geras (naudotas), Gamybos metai: 1997, veikimo valandos: 92 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 250 kN, bendras svoris: 6 300 kg, Krauss Maffei KM125-520 C1 injection moulding machine for sale. Includes SEPRO robot. Cedpfxsw Hyd Nj Af Tspu Equipped with shut-off nozzle and Stäubli quick clamping system. Clamping unit: Clamping force: 1,250 kN Max. mould opening force: 70 kN Moving platen opening force: 35 kN Moving platen closing force: 28 kN Mounting platen (H x V): 745 x 770 mm Daylight between tie bars (H x V): 470 x 470 mm Mould opening stroke: 600 mm Minimum mould installation height: 300 mm Maximum opening width: 900 mm Ejector stroke: 150 mm Ejector force forward/back: 22/10 kN Injection unit: Screw diameter: 40 mm L/D ratio: 23 Injection pressure: 2,377 bar Shot volume: 217 cc Shot weight (PS): 198 g Injection flow: 126 cc/s Screw speed: 307 rpm Electro-hydraulic equipment: Pump motor rated power: 18.5 kW Installed heating capacity: 13 kW Cylinder heating control zones: 5 Oil capacity: 345 litres Dimensions and weights: Required space approx. 4.50 x 1.60 x 2.20 m Total weight approx. 6,000 kg Max. mould weight: 1,485 kg If you have further questions, please feel free to contact us at any time.

Sąlyga: geras (naudotas), Gamybos metai: 2014, spaudimo jėga: 11 500 kN, Įranga: dokumentacija / vadovas, Uždarymo jėga: 1150 t Strypų atstumas (A x V): 1580x1280 mm Varžto skersmuo: 90 mm Šūvio svoris: 2084 g Šūvio tūris: 2290 cm3 Tipas: Horizontalus Csdpfx Afsyfgx Ae Topu Pavara: Hidraulinė

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, spaudimo jėga: 1 250 kN, varžto skersmuo: 45 mm, darbinio tūrio: 275 cm³, įpurškimo slėgis: 1 878 juosta, injekcijos svoris: 250 g, formos aukštis (min.): 300 mm, Krauss Maffei 125-520 C2 Bendroji informacija Modelis: 125-520 C2 Pagaminimo metai: 2004 Valdymas: MC4 Mašinos svoris: 6000 kg Matmenys (ilgis × plotis × aukštis): 4,5 × 1,5 × 2,2 m Uždarymo blokas Užspaudimo jėga: 125 t Formos uždarymo sistema: 125 / … Formos plokščių matmenys: 745 × 770 mm Cjdpfx Aoyfntuef Topu Atstumas tarp kolonų: 470 × 470 mm Atidarymo eiga: 600 mm Maksimalus atstumas tarp plokščių: 900 mm Formos aukštis: 300 mm Išstūmėjo jėga: 22 kN Išstūmėjo eiga: 150 mm Įpurškimo blokas Įpurškimo vienetas: … / 520 Sraigto skersmuo: 45 mm Sraigto L/D santykis: 20 Įpurškimo tūris: 275 ccm Įpurškimo masė: 250 g Specifinis įpurškimo slėgis: 1878 barai

Gamybos metai: 2002, Sąlyga: paruoštas naudoti (naudotas), Įpurškimo mazgas Cpedpfx Afsx D Hxlj Tju Sraigto skersmuo: 40 mm Ši Krauss Maffei 150-520 C2 pagaminta 2002 m. Ji turi 40 mm sraigto skersmenį, komplektuojama su Sepro robotu ir 2014 m. gamybos sandėliavimo transporteriu. Įrenginys veikiantis, siurblio darbo valandos – 50 327, automatinio režimo darbo valandos – 36 908. Pasinaudokite galimybe įsigyti šią hidraulinę Krauss Maffei 150-520 C2 įpurškimo mašiną. Dėl išsamesnės informacijos apie šią mašiną susisiekite su mumis. Taikymo sritys Įpurškimo liejimas

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, veikimo valandos: 65 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 3 500 kN, varžto skersmuo: 70 mm, darbinio tūrio: 1 047 cm³, Clamping force: 3500 kN Maximum mold opening force: 220 kN Moving platen drive force, opening: 105 kN Moving platen drive force, closing: 95 kN Clamping platen (H x V): 1100 x 1095 mm Clear distance (H x V): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold installation height: 380 mm Max. opening width: 1300 mm Ejector stroke: 250 mm Ejector force fwd/rev: 95 kN Injection Unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1778 bar Shot volume: 1047 cc Shot weight (PS): 953 g Injection flow: 527 cc/s Screw speed: 285 rpm Plasticizing rate: 95 g/s Nozzle contact force: 110 kN Electrohydraulic Equipment: Rated pump motor power: 75 kW Installed heating capacity: 30 kW No. of heating zones (barrel): 6 Oil fill volume: 720 l Dimensions and Weight: Space requirement approx.: 6.50 x 2.20 x 2.40 m Overall weight: 15,370 kg Max. mold weight: 4,780 kg Accessories: - Vibration dampers Cjdpfx Aoydmkcjf Topu Additional equipment: - 1 x hydraulic core pull - 1 x air valve - Robot interface according to Euromap 12

Sąlyga: naudotas, Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 44731, spaudimo jėga: 500 kN, varžto skersmuo: 25 mm, tarpas tarp stulpų: 320 mm, injekcijos svoris: 47 g, formos aukštis (min.): 200 mm, atvērimo eiga: 550 mm, bendras ilgis: 4 000 mm, bendras plotis: 1 163 mm, bendras aukštis: 1 787 mm, bendras svoris: 2 300 kg, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, įėjimo srovė: 58 A, Please refer to the images and video for the condition and scope of supply. Cpsdpfx Aox Srggsf Tou The system is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Sale subject to prior sale. Please visit our website to view our other listings as well. All company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Sąlyga: paruoštas naudoti (naudotas), Used Machine Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM 80 C1 Year of Manufacture: 2000 Only 1 machine left in stock No lead time, available immediately Inspection possible by appointment The machine is no longer powered / No cooling water connection Professionally stored Technical Data: Clamping force (kN): 800 Mounting plate (mm): 610×610 Tie bar distance (mm): Mould height (mm): 250 Daylight opening (mm): 750 Control system: MC4 Screen language: German Injection unit screw diameter (mm): 45 Injection pressure (bar): 1878 Cpedpou Ti Srsfx Af Tou Stroke volume (cm³): 275 Pump drive power (kW): 18.5 Heating capacity (kW): 13 Oil capacity (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Further photos available on request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Krauss Maffei Injection Moulding Machine KM 250-1900 C1 Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: Fully hydraulic Control: MC4 with colour monitor, operator panel, and diskette station 🔹 Clamping Unit Clamping force: 2,500 kN Opening force: 160 kN Movable platen force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1,050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Mould installation height: 330 mm Mould opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN Cedpfsxak Ucex Af Topu 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1,778 bar Injection volume: 1,047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Output (PS): 75 g/s (standard), 105 g/s (increased speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Dry cycles (according to Euromap): 1,400 1/h Oil tank capacity: 720 l 🔹 Dimensions and Weight Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Sąlyga: geras (naudotas), Gamybos metai: 1999, Krauss Maffei Injection Moulding Machine KM 420 - 2700 C1 • Year of manufacture: 1999 Technical Data Clamping Unit • Clamping force: 4200 kN • Max. mould opening force: 250 kN • Moving platen travel force (opening): 124 kN • Moving platen travel force (closing): 102 kN • Platen size (W x H): 1270 mm x 1200 mm • Tie bar distance (W x H): 800 mm x 800 mm • Mould opening stroke: 1020 mm • Minimum mould height: 380 mm • Maximum daylight: 1400 mm • Ejector force (forward / backward): 95 / 48 kN Injection Unit Csdpfx Aewqd Aqsf Tepu • Screw diameter: 80 mm • L/D ratio: 20 • Injection pressure: 1829 bar • Shot volume: 1433 cm³ • Shot weight (PS): 1304 g • Injection rate: 513 cm³/s • Maximum plasticising capacity: 108 g/s • Nozzle pressure: 173 kN Electrical and Hydraulic Installation • Pump motor power: 75 kW • Installed heating power: 36 kW • Number of heating zones (barrel): 7 • Oil tank capacity: 1075 l Dimensions and Weight • Machine dimensions (L x W x H): approx. 7.06 m x 2.33 m x 2.51 m • Total machine weight: 20,500 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Krauss Maffei Injection Moulding Machine KM 250 – 1900 C1 Year of manufacture: 2007 Control system: MC4 Operating hours only – 8,900!!!!! Clamping Unit: Clamping force: 2,500 kN Max. mould opening force: 160 kN Movable platen traverse force – opening: 86 kN Movable platen traverse force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Tie bar spacing (H × W): 630 × 630 mm Cjdpfxsw A N Hfj Af Tjpu Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/back): 58 / 28 kN Injection Unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Injection weight (for PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Max. plasticising rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic Equipment: Pump motor power: 55 kW Installed heating capacity: 30 kW Number of barrel heating zones: 6 Oil tank capacity: 720 l Dimensions and Weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Maximum mould weight: 3,430 kg Accessories and Additional Equipment: Oil tank Anti-vibration pads 3 × core pullers 8 × hot runner control zones 2 × air valves Robot interface as per Euromap 67 Additional information: Machine is located in Poland Ready for collection Option to arrange loading, transport, installation, and commissioning

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, INJECTION MOLDING MACHINE KRAUSS MAFFEI KM 300-1900 C1 Year of manufacture: 2007 Included: Wittmann W 731 robot General Description We offer a used injection molding machine from the renowned manufacturer Krauss Maffei, model KM 300-1900 C1, equipped with a Wittmann W 731 robot. The machine features a fully hydraulic clamping system as well as a modern MC4 control unit with color monitor, integrated operator panel, and disk drive station. Plasticizing Unit Complete plasticizing system for thermoplastics, equipped with wear-resistant protection, screw diameter 60 mm with non-return valve and open nozzle. Technical Data Clamping Unit Clamping force: 3000 kN Mold opening force: 160 kN Moving platen force: – Opening: 86 kN – Closing: 68 kN Platen dimensions (H x W): 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum daylight between platens: 1150 mm Ejector stroke: 200 mm Csdjw Du Htspfx Af Topu Ejector force: 58 / 28 kN Injection Unit Screw diameter: 60 mm Injection pressure: 2420 bar Injection volume: 769 cm³ Shot weight (PS): 700 g Screw speed (standard/option): 218 / 306 rpm Injection rate: 294 cm³/s Output at: – Standard speed: 55 g/s – Increased speed: 78 g/s Electrical-Hydraulic System Pump motor capacity: 55 kW Heater power: 30 kW Number of heating zones (cylinder): 6 Dry cycles (Euromap): 1350 cycles/h Oil tank capacity: 720 l Dimensions and Weight Net weight incl. control cabinet: 14.2 t Overall dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Gamybos metai: 2002, Sąlyga: paruoštas naudoti (naudotas), Clamping force: 2500 kN, clear tie bar distance: 630 mm/630 mm, opening stroke: 1150 mm, min. mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control: MC4. Machine dimensions: 5700 mm/2200 mm/2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner control zones, 4 core pulls, blow unit, accumulator, hydraulic tie bar puller, energy-saving circuit, ALS interface, 20mA interface, and colour dosing device interface. On-site inspection possible, documentation available. Cpsdpfjuiykdjx Af Tsu

Gamybos metai: 1998, Sąlyga: paruoštas naudoti (naudotas), Clamping force: 1500 kN, screw diameter: 50 mm, tie bar spacing: 500 mm, platen dimensions X/Y: 780 mm / 790 mm, opening stroke: 600 mm, daylight: 900 mm, ejector stroke: 150 mm, shot volume: 305 cm³, shot weight: 278 g, injection pressure: 2336 bar. Machine dimensions X/Y/Z: approx. 4700 mm / 1550 mm / 2200 mm, weight: approx. 7000 kg, control system: MC4. Including Sepro handling. Documentation available. On-site inspection possible. Cpodpfsw Hthzox Af Tju

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 504212, spaudimo jėga: 5 000 kN, varžto skersmuo: 90 mm, tarpas tarp stulpų: 900 mm, įpurškimo slėgis: 1 742 juosta, įrengimo aukštis: 480 mm, No reserve price – guaranteed sale to the highest bidder! Csdpfx Ajw Dy Rwjf Topu TECHNICAL DETAILS Clamping Unit Clamping force: 5,000 kN Distance between tie bars (h x v): 900 x 800 mm Max. mold opening distance: 1,170 mm Min. mold installation height: 480 mm Platen opening stroke: 1,650 mm Ejector stroke: 250 mm Ejector force: 95 kN Ejector force (reverse): 48 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20 Injection pressure: 1,742 bar Injection volume: 1,953 cm³ Shot weight for PS: 1,777 g Injection rate: 649 cm³/s Nozzle contact force: 115 kN MACHINE DETAILS Electrical Data Pump connected load: 90 kW Heating capacity: 44 kW Operating voltage: 400 V Frequency: 50 Hz Total rated current (Iₙ): 306 A Motor rated current (Iₙ): 170 A Operating voltage: 3-phase Dimensions & Weight Net weight: 25.8 t Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m Note: Delivery, installation, and commissioning can be arranged upon request for an additional fee.

Sąlyga: naudotas, Gamybos metai: 1998, Injection Moulding Machine Krauss Maffei KM 300 1400 C1, year 1998 Control system: MC 3 Clamping force: 3,000 kN Shot weight: 900 g Cpsdpsw D Hglofx Af Tou Core pull: 2 Screw diameter: 60 and 70 mm Operating hours: approx. 18,000 h

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1,877 bar Dosage volume: 1,077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630 x 630 mm Platen size: 995 x 1,050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Cpodpfx Afsycthrs Teu Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Injection unit hardened - bimetallic Energy-efficient machine – equipped with a system of 3 hydraulic pumps with variable output Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Robot: Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes powered by electric servomotors (X, Y, Z, B); C-axis Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50 x 2.20 x 2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 678 ccm Clamping Unit: Clamping force: 200 t Tie bar spacing: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 - Touchscreen Additional equipment: Very good technical condition Operating hours: approx. 8,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Air core pull x 3 Control with hot runner circuits x 10 Injection unit hardened – bimetallic Energy-efficient machine – features a system with 3 variable-capacity hydraulic pumps Parallel movements Proportional valve on the injection unit – for precise injection Machine manufactured in December 2018, delivered to the customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servomotors (electric); axis C – pneumatic Touch control panel Robot safety package Cpsdpfx Afjycthls Teu Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Krauss Maffei KM 110-700 C2 Year of manufacture: 1998 Injection Unit: - Screw diameter: 45 mm - Shot weight: 278 g - Injection pressure: 2336 bar - Dosage volume: 305 ccm Clamping Unit: - Clamping force: 110 t - Tie bar spacing: 470x470 mm - Size of platen: 745x770 mm - Ejector: hydraulic - Clamping unit: hydraulic Control system: MC IV Additional Equipment: - Machine in very good technical condition - Euromap 12 Cpodsyctghjpfx Af Tou - Robot interface - Air valve x 1 - Hydraulic core pull x 1 - Control system with hot runners x 12 - Injection unit hardened – bimetallic - Parallel movements - Proportional valve on injection unit – precise injection - Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) - The machine has been regularly serviced by authorized Krauss Maffei service in Switzerland Dimensions: - Weight: 6,200 kg - Length/Width/Height: 4.66x1.51x2.19 m Drive: - Pump/Motor: 18.5 kW - Heating capacity: 16 kW - Total power: 34.5 kW All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine, or to participate in live technical tests at our company in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Krauss Maffei KM 80-180 CX with Sepro Industrial Robot 55 Sprue Picker Year of manufacture: 2005 Injection Unit: Screw diameter: 30 mm Injection weight: 77.4 g Injection pressure: 2025 bar Shot volume: 85 ccm Clamping Unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - Touchscreen Additional equipment: Cpedpfjycqz Aox Af Tou Euromap 67 Robot interface Controller with air valve Hydraulic core pull x 1 Injection unit hardened - bimetallic Sepro Industrial Robot 55 sprue picker Year of manufacture: 2018 It is possible to purchase a Moretto brand raw material feeding system at an additional cost. The set includes: - Volumetric screw feeder with hopper - Conveyor with proportional valve Dimensions: Weight: 3900 kg Length/Width/Height: 3.80x1.50x2.10 m Drive: Pump/Motor: 15 kW Heating power: 8.12 kW Total power: 23.12 kW All machines offered are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Krauss Maffei KM 35-55 CX / Machine in very good technical condition Year of manufacture: 2008 Injection unit: Screw diameter: 18 mm Shot weight: 18 g Injection pressure: 2500 bar Dosage volume: 20 cm³ Clamping unit: Clamping force: 35 t Tie bar distance: 320 x 320 mm Platen size: 540 x 540 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC V - Touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air valve x 2 Control system with 6 hot runner zones Injection unit hardened - bimetallic The machine has been regularly serviced by Krauss Maffei authorized service in Germany It is possible to change the screw diameter to 20 mm or 22 mm Dimensions: Weight: 2,600 kg Length/Width/Height: 3.50 x 1.40 x 1.70 m Drive: Pump/motor: 11 kW Heating capacity: 3.78 kW Cpsdpfx Aeycqzijf Tju Total power: 14.78 kW All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request