Įpurškimo liejimo mašina

KraussMaffei KM 110-750 CX

Būklė: geras (naudotas), Gamybos metai: 1988, Kraštų lankstymo staklės, lenkimo presas, švytuoklinės lankstymo staklės, štampavimo lenkimo staklės Rjdsv Tpxqjpfx Alcoch -Pristatymas: esamoje, kaip apžiūrėta, būklėje, žr. nuotraukas -Funkcija: rankinis valdymas (be automatinio režimo) -Gamintojas: RAFAMET švytuoklinės lankstymo staklės, tipas KM-4 -Pavara: mechaninė -Maks. darbo plotis: 2020 mm -Maks. lakšto storis: 4 mm -Atstumas iki atmušos: 750 mm -Galia: kW -Matmenys: 3350/1540/H1510 mm -Svoris: 3900 kg

Būklė: naudotas, Gamybos metai: 1998, Automatic PET Bottle Blow Moulding Machine Manufacturer: SIDEL Model: SBO 16/16 S1 Rodoutni Rspfx Alcjch Year of manufacture: 1998 Output: 16,000 bph for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L bottle moulds Preform feeder Chiller unit Technical condition: used machine, fully operational until disassembly. The machine is currently dismantled, assembled in components, and prepared for transport. Complete and original technical documentation.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, vėsinimo galia: 800 kW (1 087,70 AG), bendras svoris: 4 500 kg, Įranga: kompresorius, šaldiklis, Chiller Trane RTUB224 Cooling capacity: 800 kW Number of cooling circuits: 1 Refrigerant type: R134A Voltage: 400 V Power consumption: 176 kW Year of manufacture: 2009 Includes dry coolers: 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar Redpfx Aljrzq Arecjch The specified cooling capacity is based on a water outlet temperature of +7°C at a condensation temperature of +40°C.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection unit: - Screw diameter: 35 mm - Shot weight: 153.8 g - Injection pressure: 2083 bar - Injection volume: 169 ccm Clamping unit: - Clamping force: 60 t - Tie bar spacing: 370x320 mm Rsdok Rnq Nepfx Alcjch - Maximum platen size: 550x530 mm - Ejector: hydraulic - Clamping system: hydraulic Control system: UNILOG B6 Additional equipment: - Machine in very good technical condition - Euromap 67 Dimensions: - Weight: 3100 kg - Length/Width/Height: 3.79x1.24x1.88 m Power supply: - Pump/Motor: 15 kW - Heaters: 10.4 kW - Total: 25.4 kW

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036946, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 1 860 juosta, injekcijos svoris: 183 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 850 mm, bendras svoris: 5 600 kg, šildymo galia: 11,5 kW (15,64 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 735 mm, įrankio svoris: 600 000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for fully electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short lead times. Suitable for a wide range of applications, such as the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Short delivery times made possible by the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM - MC P1 with 15" TFT colour screen featuring multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Clear width (h x v): mm 470 x 420 - Mounting plate (h x v): mm 610 x 560 - Mould installation height min. - max.: mm 150 - 400 - Opening width: mm 750 Redpfeud H Dmex Alcjch - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force fwd/rev: kN 22 / 22 - Ejector speed fwd/rev: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter / type: mm 40 / standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke (PS): g 183 - Injection speed: mm/s 200 - Injection flow: cm³/s 251 - Screw drive / speed: 1/min 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight (with control cabinet): t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising system - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot-runner shut-off, single - Electrical interface for cascade control, 4x - Euromap interface for handling, E18, E63 - Euromap interface (central computer), E67, E77 - Water manifold, 4x - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression moulding control - Graphics analysis package The machine is located at our Parsdorf facility and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1998, Engel ES 330/80 HLS Clamping force: 80 tons Year of manufacture: 1998 Screw diameter: 35 mm Shot volume: 154 cm³ Enlarged platen: 660 x 560 mm Rcsdpfopdr Aiex Alcsh Minimum mold installation height: 200 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, mašinos/transporto priemonės numeris: 241.125, Funkcionalumas: visiškai funkcionalus, Horizontalioji juostinė pjovimo staklės, gamintojas Schelling, skirtos medienos pagrindo medžiagoms pjauti HPO – pjovimo optimizavimo programa Pjūklo disko išsikišimas: maks. 95 mm Pjūklo vežimėlio judėjimo greitis iki 120 m/min Rcjdjx Ebzdopfx Alcoh Pjovimo ilgiai: Modelis FH 4 430 – 4.300 mm Galima apžiūrėti veikiančią iki 2026 metų pradžios (numatomas išmontavimas) Didžiausias pjūklo disko skersmuo – 350 mm Išsikišimas – 95 mm Spaustuvo atidarymas 90 mm Pagrindinio pjūklo variklio galia – 15 kW Pjūklo brėžiantysis disko skersmuo – 300 mm Padavimo greitis pirmyn iki 80 m/min atgal 80 m/min Pjūklo padavimo greitis pirmyn iki 120 m/min atgal 120 m/min

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: For the application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity 18 l/min Frequency inverter for variable speed of application roller Frequency inverter for variable speed of counter roller Transport belt speed adjustable 3–14 m/min Stainless steel recovery trays Pad Group + Brush Group: Rcsdpfx Asx Ah A Aolcoh For distributing and removing excess oils Touch screen control Manual height adjustment Transport belt speed adjustable 3–14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions (L x D): 300 x 160 mm Quick-change system for brushes UV / LED Group: Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV LED output: 12 Watt/cm² Incl. ventilation fan Transport belt made of Kevlar fabric Transport belt speed adjustable 3–14 m/min Discharge Conveyor Belt: Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed adjustable 3–14 m/min Notes on Used Machinery: • Errors in technical specifications and prior sale reserved. • Prices stated are ex-location and ex-loading. • Machine has been cleaned and function tested. • All machines are sold as seen, without any guarantee or warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements only valid in written form. (We will only respond to enquiries that include your address and telephone number!)

Gamybos metai: 2004, būklė: dilaminuotas dirbtuvėje (naudotas), No. 2054 1 used, partially overhauled and function-tested extruder Alphatec Type AE-S 75.28 Screw diameter 75 mm – 28 L/D Drive 75 kW – AC Screw speed adjustable up to 80 rpm 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Rcjdjiyya Aepfx Alcsh Control cabinet – NEW control system – type Inspection possible at our facility in Wuppertal. Additional extruders available.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, veikimo valandos: 28 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 300 kN, For sale is a KraussMaffei hybrid injection moulding machine, 2-component model, type KM 130-750 CX. The machine is in very good condition, immediately operational, and has low operating hours. It features electronic injection and dosing units, as well as a hydraulic clamping unit. Technical data: Year of manufacture: 2011 Operating hours: 28,000 h Clamping force: 130 t Cylinder Ø 30 mm / 40 mm (plus 2x 50 mm additionally included) Core pull: 1x hydraulic Needle shut-off: pneumatic Tie-bar extension: 160 mm Cavity pressure transducer Selector valve Transport and loading can be organised across Europe for an additional charge upon request. All prices are subject to VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? Redpfou Hxm Uox Alcsch For further information or contact options, visit our website.