Butelių pūtimo mašina "PET 16 000 bph

Sidel SBO 16

Būklė: naujas, Parts for SIDEL blow molding machine Ball bearings O-rings Nozzle Belts Axle Hnsdpoiqum Ijfx Ahaer

Būklė: naudotas, Gamybos metai: 2019, Pilna komplektacija parduodama: 1 York šaldytuvas ir viena Jäggi šaldymo įranga. Hnodev Npgmspfx Ahaor

Būklė: geras (naudotas), Gamybos metai: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - Injection unit control. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with 135 mm screw diameter, shut-off valve, and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Opening force: 560 kN - Platen dimensions (H x V): 1,600 x 1,600 mm - Tie bar spacing (H x V): 1,140 x 1,140 mm - Maximum opening stroke: 1,600 mm - Mould height (min-max): 500 - 1,100 mm - Daylight: 2,100 mm Hnjdpfxotrya Ro Ahajr - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Injection weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Rated motor power: 132 kW - Dry cycle time per Euromap 6: 965 cycles/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Footprint dimensions (L x W x H): 11.72 x 2.92 x 2.71 m.

Gamybos metai: 2010, būklė: geras (naudotas), 2250 mm pallet nailing line Semi-automatic nailing table Hjdpfxjpy H Ere Ahajnr Turner + (optional marker) Stacker (maximum 3000 mm) Transfer

Gamybos metai: 1997, būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 41110, Nominal pressure: 110 bar at existing flow rate: 6 l/min Maximum inlet pressure: 12 bar Hsdpfx Aed D U T Rshaonr electrical connection: 230 V, 1.5

Būklė: naudotas, Gamybos metai: 1992, Automatinė PET butelių pūtimo mašina Gamintojas: SIDEL Tipas: SBO 4 S1 Metai: 1992 Našumas: 4 000 (1,5 L / 2 L buteliams) Įdiegta galia: 150 kW Komplekte 1,5 L formos Preformų padavėjas Techninė būklė: naudota mašina, įsijungia, programa veikia gerai Hnjdpfx Ahewa Rhrjaor

Gamybos metai: 2019, būklė: beveik kaip naujas (naudotas), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - As new: barely used - Documentation available (both electronic and hard copy) - Pallet with spare parts included TECHNICAL DATA Model: RWO 360/400-1150 Maximum furnace temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C under vacuum Control accuracy: ± 2 K Temperature uniformity: ± 6 K in the range from 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Hnsdpfxoiryyao Ahaor Furnace workspace: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Ultimate vacuum (cold, clean, dry furnace): < 5 x 10-5 mbar Footprint: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We do not accept any liability for the accuracy, completeness, or up-to-dateness of the information provided.

Būklė: naudotas, Stretch blow moulding machine by Etek ISBM Line = Injection stretch blow moulding Stretch blow moulding machine for single-use PET bottles from PET preforms Stretch blow moulding machine for rotary table production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Hnodjkucxljpfx Ahaor Year of manufacture: 2012 Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As-new condition

Būklė: naudotas, mašinos/transporto priemonės numeris: LC594, Technical Specifications & Performance Data Hnedpfx Ahsydn A Hoaor This complete PET bottling line is designed for carbonated water and soft drinks, delivering consistent performance and reliable quality for beverage production. It combines highly efficient blow moulding, isobaric filling, labelling, packaging, and end-of-line automation into a coherent used bottling line, suitable for industrial packaging operations in the second-hand sector. Production speed: 13,000–14,000 bottles per hour Containers: PET bottles, neck finish 28 1881 Blow moulder: Sidel SBO10, 10 cavities Preform handling: Sidel EBH 2050 preform hopper Air conveyor: Sidel-Alsim Rinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10K Rinser: 48 clamps, 1 water treatment unit Filler: 60 isobaric valves Capper: 10 heads Premix/Mixer: Sidel-Alsim, throughput 30 m³/h Bottle dryer: ACI Labeller: Krones Contiroll, rotary, 15 plates, PET wrap-around, roll-fed Shrink wrapper: Acmi Fenix, film-only configuration Handle applicator: Smipack HA 35-50-70 Palletiser: Alsim Valiant 1I 1P, fully automatic, pusher type Pallet wrapper: PM Pragometal OBS Rotomatic Standard Advanced Automation & Control Systems The line integrates component HMIs and automatic control functions at each station to simplify operation and changeovers. The isobaric filling block ensures precise filling of carbonated beverages, while the rotary roll-fed labelling system supports continuous, high-speed label application. Quick-change mechanical adjustments and format parts help maintain uptime and shorten setup times in beverage production environments. Line Integration Designed for inline operation from preform loading to palletising, the system features smooth bottle transfer via air conveyors and synchronised starwheels in the filling monoblock. It integrates upstream blow moulding with downstream labelling, shrink wrapping, handle application, and palletising, creating a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks and supports multiple PET bottle formats and heights compatible with neck finish 28 1881. Machine Condition & Maintenance History This used line is offered for sale and is presented in operational condition. Component manufacturing years range from 1996 to 2019, indicating a carefully assembled selection of filling machinery. Buyers can arrange inspections to evaluate performance, equipment condition, and overall integration of the line prior to use in beverage production. Operational Performance & Versatility Optimised for carbonated products, the isobaric filler provides precise CO₂ retention and foam control. The Sidel blow moulder...

Būklė: naudotas, Bottle filling line with a capacity of 30,000 bottles per hour. Compatible bottle types: 0.33l Vichy, 0.33l Euro, 0.35l Frucade, and 0.5l NRW single-use and returnable bottles. The line comprises the following machines/components: - Depalletizing and palletizing unit Manufacturer: Radenska & Steinle - Unpacker Manufacturer: SZA Federspiel - New glass depalletizer Manufacturer: Steinle Fördertechnik - Decorker Manufacturer: Rink - Bottle washer Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer pre-warmer Manufacturer: Fischer - Bottle filler Manufacturer: Krones - Crown cork feed bunker with magnetic conveyor Manufacturer: Gassner - Bottle fill level inspection system Manufacturer: Metec - Labeller Manufacturer: Krones/Renner - Label inspection system Manufacturer: Miho - Packer Manufacturer: SZA Federspiel - Full crate inspection system Manufacturer: Metec - Bottle carrier erector Additional Information: Line includes depalletizer and palletizer; years of construction: 1993 - 2009. Hedpfx Asvu Tt Iohaenr Equipment: depalletizer and palletizer unit; unpacker; new glass depalletizer; decorker; bottle washer; crate washer; bottle inspector; beer pre-warmer; bottle filler; crown cork supply; fill level inspection; labeller; label inspection; packer; full crate inspection; bottle carrier erector.