Krauss Maffei Km 150 520 C1 pirkti naudotą (198)

Sąlyga: naujas, Gamybos metai: 2025, Injection Molding Machine – Krauss Maffei KM 500-4300 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit control. MC6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 90 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle orifice: 6 mm Technical specifications (standard version) Clamping Unit Clamping force: 5000 kN Opening force: 350 kN Platen dimensions (H x V): 1430 x 1350 mm Tie bar spacing (H x V): 1040 x 910 mm Opening stroke: 1350 mm Mold height (min.–max.): 400–950 mm Daylight: 1750 mm Ejector stroke: 250 mm Ejector force front/rear: 95 / 49 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20.0 Injection pressure: 1839 bar Shot volume: 2290 cm³ Kodpfx Aboxdd S Nekonf Shot weight (PS): 2084 g Injection speed: 100 mm/s Injection flow rate: 636 cm³/s Screw speed (standard): 195 rpm Plasticizing rate (at standard screw speed): 134 g/s Nozzle contact force: 129 kN Electro-hydraulic system Pump motor power: 90 kW Installed heater power: 44 kW Number of barrel heating zones: 7 Dry cycle time according to Euromap 6: 2.8 s / 728 mm Dry cycle time according to KM standard: 2.5 s / 520 mm Hydraulic oil volume: 1180 l Linear Robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Part deposition on operator-offside Axes: X axis (from mold): 900 mm, servomotor Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servomotor Z axis (transverse): 2500 mm, servomotor Dimensions and Weight Net weight (with control cabinet): 25.0 t Machine dimensions (L x W x H): 8.08 x 2.80 x 2.39 m

Sąlyga: geras (naudotas), Gamybos metai: 2011, Injection moulding machine Krauss Maffei KM 850-12000 MX With Krauss Maffei LRX 500 robot Year of manufacture: 2011 Machine description: Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV-controlled injection unit. MC 5 control system with colour monitor, integrated control panel, and USB data storage. Plasticizing unit: Complete plasticizing system for thermoplastics with a 135 mm diameter screw, shut-off nozzle, and open nozzle. Knsdpfxow Rdlqo Abksf Nozzle radius: 25 mm, nozzle orifice: 9 mm Technical data: Clamping unit: Clamping force: 8,500 kN Mould opening force: 560 kN Platen size (H x V): 1600 x 1600 mm Tie bar spacing (H x V): 1140 x 1140 mm Mould opening stroke: 1600 mm Mould height (min-max): 500 - 1100 mm Daylight opening: 2100 mm Ejector stroke: 300 mm Ejector force: 200 / 100 kN Injection unit: Screw diameter: 135 mm Injection pressure: 1389 bar Injection volume: 8588 cm³ Shot weight (PS): 6098 g Injection speed: 1414 cm³/s Electro-hydraulic equipment: Pump motor power: 132 kW Dry cycle time (Euromap 6): 965 cycles/h Oil tank capacity: 2440 l Dimensions and weight: Net weight with control cabinet: 49 t Footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Sąlyga: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 77 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 2 000 kN, varžto skersmuo: 50 mm, Type: KM 200-700 C2 (CLEAN ROOM) Year: 2000 Screw diameter: 50 mm Operating hours: 77,000 h With accumulator Euromap 12 Kjdpfx Aewm Ifnebkonf Injection pressure: 1,892 bar Tie bar spacing: 560 x 560 mm Platen size: 915 x 915 mm Minimum mould height: 350 mm Opening stroke: 700 mm Daylight: 1,050 mm

Sąlyga: naudotas, Gamybos metai: 2004, Krauss Maffei KM125-390 C2 (pagaminimo metai 2004) Ksdpfx Abjw D Rmiekjnf Uždarymo jėga: 125 kN Darbo valandos: apie 63 000 val. Mašiną galima apžiūrėti bet kuriuo metu

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Techniniai duomenys Pagaminimo metai: 2007 Uždarymo pusė Uždarymo jėga: 13 000 kN Atidarymo eiga / didžiausias montavimo aukštis: 2 300 mm Didžiausias tvirtinimo plokščių atstumas: 4 000 mm Formos įstatymo aukštis min./maks.: 1 000 - 1 700 mm Didžiausias tvirtinimo plokštės aukštis: 1 910 mm Mažiausias formos dydis: 1 020 x 820 mm Laisvas tarpas tarp kolonų: 1 500 mm Antgalio spindulys: R40 mm Formos svoris: 29 000 kg Išstūmiklio eiga: 350 mm 1. Įpurškimo pusė Sraigto skersmuo: 120 mm Tūris vienam judesiui: 6 786 ccm 2. Įpurškimo pusė Sraigto skersmuo: 105 mm Knjdjw Rfkhspfx Abkef Tūris vienam judesiui: 5 195 ccm NC5 valdymas Šerdžių ištraukėjai AWS/DS: 1/1

Sąlyga: naujas, Gamybos metai: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel with a color touchscreen. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Knodpfjxdd Spox Abkjf Nozzle radius: 15 mm Nozzle opening: 6 mm Technical data (standard version) Clamping Unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1050 mm Tie-bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force (forward/backward): 58 / 28 kN Injection Unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2006 bar Shot volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Standard injection flow rate: 311 cm³/s Standard screw speed: 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heating capacity: 22.4 kW Dry cycle time (Euromap 6): 2.7 s Oil tank capacity: 720 dm³ Linear Robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part deposit on operator-opposite side Axes: X-axis (from mould): 900 mm, servo motor Y-axis (vertical, with motor brake): 750/750 mm, telescopic, servo motor Z-axis (cross): — Dimensions and Weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Sąlyga: naudotas, Gamybos metai: 2006, Liejimo mašina Krauss Maffei KM 800-4300 MX, 2006 m. Mašina komplektuojama taip: - 5 hidraulinės kaskadinės valdymo sistemos Kedpew Hwr Dofx Abkonf - Įpurškimo agregatas su 90 - MT5 valdymo sistema - Krauss Maffei tvarkymo sistema - 2 konvejeriniai juostos

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, KM 500/2700C2 Technical Data Clamping Side: Clamping force: 5000 kN Platen size (h x v): 900 x 800 mm Minimum mold height: 480 mm Maximum platen distance: 1650 mm Centering diameter: 200 mm Mold weight: 7900 kg Injection Side: Screw diameter: 80 mm Shot volume: 1433 cm³ Injection pressure: 1829 bar Kodpfx Abjv Uzq Uekenf Equipment: MC 4 control system Core pulls: 2+2 Machine is sold without robot and peripherals!

Sąlyga: naujas, Gamybos metai: 2025, Injection Moulding Machine – Krauss Maffei KM 160-750 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer utilizing real-time Ethernet technology, equipped with an integrated 21.5" operator panel featuring a colour touch screen. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 50 mm, with non-return valve and open nozzle. Nozzle radius: 10 mm Nozzle bore: 4 mm Technical Data (standard version) Clamping Unit Clamping force: 1,600 kN Opening force: 86 kN Platen dimensions (H x V): 820 x 845 mm Tie bar spacing (H x V): 520 x 520 mm Opening stroke: 650 mm Minimum mould height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force forward/backward: 23 / 10 kN Injection Unit Screw diameter: 50 mm L/D ratio: 20.2 Injection pressure: 1,892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Injection speed: 90 mm/s Injection rate (standard): 177 cm³/s Screw speed (standard): 265 rpm Electro-hydraulic System Pump motor power: 22 kW Installed heating capacity: 15.5 kW Dry cycle time according to Euromap 6: 2.1 s Oil tank capacity: 400 L Linear Robot – Krauss-Maffei LRX 100 Payload < 10 kg (gripper + drives + parts) Part placement on operator-opposite side Axes: X axis (from mould): 620 mm, servomotor Y axis (vertical, with motor brake): 1,200 mm, servomotor Z axis (transverse): 1,500 mm, servomotor Dimensions and Weight Net weight (with control cabinet): 6.10 t Knjdpfsxdd N Uex Abkef Machine dimensions (L x W x H): 4.93 x 1.62 x 2.04 m

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Krauss Maffei KM 1100–12000 MX Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Wittmann robot Knedpfx Aboxcputokjf General description: The machine is equipped with a fully hydraulic clamping system. Control system: MC5 with color monitor, integrated operator panel, and three built-in USB ports. Plasticizing unit: suitable for thermoplastics, abrasion-resistant version, screw diameter 120 mm, non-return valve, open nozzle. Technical data Clamping unit Clamping force: 11,000 kN Mould opening force: 770 kN Platen dimensions (H × V): 2210 × 1910 mm Distance between tie bars (H × V): 1550 × 1250 mm Mould opening stroke: 2000 mm Mould height (min–max): 600 – 1200 mm Platen stroke: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1,758 bar Injection volume: 6,786 cm³ Max. shot weight (PS): 6,175 g Screw speed (standard/option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (with accumulator): 1,696 cm³/s Electrohydraulic equipment Pump motor power: 132 kW Heater power: 82 kW Number of cylinder heating zones: 7 Number of dry cycles per Euromap: 802 / h Oil tank capacity: 2,440 l Dimensions and weight Net weight (with control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising Unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Knsdpsw U Rcdjfx Abkef Nozzle radius: 15 mm, opening: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Max. daylight: 1150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Pump motor power: 45 kW Heater power: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke according to Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, veikimo valandos: 70 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 6 500 kN, varžto skersmuo: 100 mm, įpurškimo slėgis: 1 742 juosta, formos aukštis (min.): 600 mm, atvērimo eiga: 1 150 mm, plokštės plotis: 1 440 mm, plokštės aukštis: 1 490 mm, Injection moulding machine with Wittmann automation TECHNICAL DETAILS Clamping force: 6,500 kN Mold opening force: 346 kN Sliding platen opening force: 169 kN Sliding platen clamping force: 144 kN Mounting platen dimensions: 1,490 mm x 1,440 mm Clear tie bar spacing: 1,000 mm x 930 mm Mould opening stroke: 1,150 mm Minimum mould height: 600 mm Injection unit Screw diameter: 100 mm Injection pressure: 1,742 bar Injection volume: 2,411 cm³ Shot weight for PS: 2,170 g Injection rate: 649 cm³/s Wittmann W643 Robot X-axis servo: 1,200 mm Y-axis servo: 2,400 mm Z-axis servo: 6,000 mm C-axis servo: +/- 90° A-axis servo: +/- 180° Vacuum: 4 circuits Gripper: 4 circuits Electrical and hydraulic equipment Pump motor rated power: 90 kW Installed heater power: 44 kW Number of barrel heating zones: 7 Oil tank capacity: 1,240 l MACHINE DETAILS Net weight with control cabinet: 39.5 t Operating hours: 70,000 h Kjdpfxewp Si Ns Abkenf MAINTENANCE All hydraulic lines replaced 12/24 Last inspection Krauss Maffei 24.03. New (hydraulic) screw drive 25.01. New non-return valve 01/25 FEATURES - Fully hydraulic clamping system - MC 4 control system with colour monitor and integrated operator panel - Built-in floppy disk drive - Complete plasticising unit for thermoplastics with 100 mm screw diameter, check valve and open nozzle

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Krauss Maffei Injection Moulding Machine KM 800 – 12000 MX Year of manufacture: 2006 Clamping Unit: Knjdetmq Akjpfx Abkjf - Clamping force: 8,000 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1,600 x 1,530 mm - Tie bar clearance (H x V): 1,120 x 1,000 mm - Maximum mold opening stroke: 1,600 mm - Mold height (min - max): 500–1,100 mm - Max platen stroke: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection Unit: - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Screw speed, standard/option: 121/153 rpm - Injection output (standard) Electrical & Hydraulic Equipment: - Pump motor power: 110 kW - Installed heater capacity: 57 kW - Number of barrel heating zones: 7 - Dry cycle time (Euromap): 965 cycles/h - Hydraulic oil tank capacity: 1,500 l Dimensions & Weight: - Net weight with control cabinet: 45 t - Machine dimensions (L x W x H): 10.81 x 2.92 x 2.51 m

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine Year of manufacture: 2011 LRX 500 Robot Z-axis: 4000 mm X-axis: 1500 mm Y-axis: 1250/1250 mm Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit regulation. MC 5 control system with colour monitor, integrated operator panel, and USB data carrier. Plasticising unit: Complete plasticising unit for thermoplastics with a 135 mm screw diameter, non-return valve and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit: - Clamping force: kN 8500 - Mold opening force: kN 560 - Platen dimensions (H x V): mm 1600 x 1600 - Tie bar clearance (H x V): mm 1140 x 1140 - Mold opening stroke: mm 1600 - Mold height (min–max): mm 500 - 1100 - Daylight: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200 / 100 Injection unit: - Screw diameter: mm 135 - Injection pressure: bar 1389 Knsdowqdyiopfx Abkof - Shot volume: cm³ 8588 - Shot weight for PS: g 6098 - Injection rate: cm³/s 1414 Electro-hydraulic equipment: - Rated pump motor power: kW 132 - Dry cycle time according to Euromap 6: 1/h 965 - Oil tank capacity: l 2440 Weights and dimensions: - Net weight with control cabinet: t 49 - Installation space (L x W x H): m 11.72 x 2.92 x 2.71

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine Year of manufacture: 2015 General Description: Hydraulic-mechanical, two-platen clamping system with 4 pressure cushions on the fixed platen and 4 adjusting units on the moving platen. The machine is equipped with an injection unit control system of the PV (proportional valve) type. Control operates via a modern MC6 system, based on an industrial PC with real-time Ethernet technology. The operator panel is an integrated 19-inch touchscreen with colour display, LED backlight, and full process visualization using ProcessDesigner. Plasticising Unit: Complete system for thermoplastics processing Abrasion-resistant (wear-protected) version Screw diameter: 105 mm Check valve and open nozzle Technical Data: Clamping Unit: Knodpjwyxbgefx Abkef Clamping force: 9000 kN Mould opening force (pressure cushions): 630 kN Platen dimensions (W x H): 1660 x 1530 mm Tie bar spacing: 1180 x 1000 mm Max. mould opening stroke: 1600 mm Mould height (min – max): 500 – 1100 mm Max. total opening stroke: 2100 mm Ejector stroke: 300 mm Ejector force (forward / return): 140 / 70 kN Injection Unit: Screw diameter: 105 mm L/D ratio: 23.0 Injection pressure: 1778 bar Injection volume: 4546 cm³ Shot weight (for PS): 3228 g Injection rate: 805 cm³/s Screw speed (standard): 150 rpm Nozzle contact force: 166 kN Electrical and Hydraulic Equipment: Pump motor power: 120 kW Heater power: 59 kW Number of heating zones (barrel): 7 Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm Dry cycle time / stroke (KM standard): 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and Weight: Net weight (incl. control cabinet): 40 tons Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Krauss Maffei KM 2300 - 12000 MC Injection Moulding Machine Year: 2004 Control system: MC 4 Operating hours: 93,900 Clamping unit Clamping force: 23,000 kN Max. mould opening force: 1,420 kN Moving platen slide force Opening: 227 kN Moving platen slide force Closing: 203 kN Mould platen size (h x v): 2,830 mm x 2,400 mm Tie bar spacing (h x v): 2,000 mm x 1,600 mm Mould opening stroke: 2,600 mm Min. mould height: 1,100 mm Max. mould height: 1,800 mm Max. daylight: 3,700 mm Hydraulic ejector - stroke: 350 mm Ejector force forward/backward: 415/115 kN Injection unit Screw diameter: 135 mm Ls/D ratio: 23 Knedpfx Aewq Ed Aobkjf Injection pressure: 1,389 bar Shot volume: 8,588 ccm Injection weight, PS: 7,815 g Injection rate: 1,019 ccm/s Screw speed: 113 rpm Max. plasticizing rate: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Rated pump motor power: 132 kW Installed heating capacity: 997 kW Adjustable barrel heating zones: 7 Drying cycles per hour: 350 Tank capacity: 2,500 l Dimensions and weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total machine weight: 143,000 kg Max. mould weight: 62,000 kg LRX 1000 Robot X axis - 2,000 mm Y axis - 3,000 mm Z axis - 5,000 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Krauss Maffei Injection Moulding Machine KM 80-160 C2 Year: 2002 Control system: MC 4 Clamping unit: Clamping force: 800 kN Maximum mold opening force: 55 kN Moving platen traverse force Open: 31 kN Moving platen traverse force Close: 20 kN Mould platen dimensions (H x V): 610 mm x 610 mm Tie bar spacing (H x V): 405 mm x 405 mm Mould opening stroke: 500 mm Minimum mould height: 250 mm Maximum daylight: 750 mm Hydraulic ejector - stroke: 150 mm Kjdjv Dhnlspfx Abkonf Ejector force forward/backward: 20/11 kN Injection unit: Screw diameter: 30 mm Ls/D ratio: 26 Injection pressure: 2025 bar Shot volume: 85 cm³ Shot weight, PS: 77 g Electrical and hydraulic equipment: Nominal pump motor output: 11 kW Installed heating power: 9 kW Adjustable barrel heating zones: 5 Number of drying cycles: 1800 1/h Tank capacity: 270 ltr. Dimensions and weight: Machine dimensions: 3.81 m x 1.40 m x 2.00 m Total machine weight: 3,200 kg Maximum mould weight: 860 kg

Sąlyga: geras (naudotas), Gamybos metai: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - Injection unit control. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with 135 mm screw diameter, shut-off valve, and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Opening force: 560 kN - Platen dimensions (H x V): 1,600 x 1,600 mm - Tie bar spacing (H x V): 1,140 x 1,140 mm - Maximum opening stroke: 1,600 mm - Mould height (min-max): 500 - 1,100 mm - Daylight: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Injection weight for PS: 6,098 g Ksdpfx Abotrya Rekjnf - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Rated motor power: 132 kW - Dry cycle time per Euromap 6: 965 cycles/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Footprint dimensions (L x W x H): 11.72 x 2.92 x 2.71 m.

Sąlyga: geras (naudotas), Gamybos metai: 1997, Krauss Maffei KM 650 - 3500 C2 Injection Moulding Machine Year of manufacture: 1997 Fully hydraulic clamping system. MC 3 control system SP 3500 plasticizing unit Complete plasticizing system for thermoplastics, with abrasion protection, screw diameter 90 mm, with non-return valve and open nozzle. Clamping unit: Complete plasticizing system for thermoplastics, screw diameter 90 mm, with non-return valve and open nozzle. TECHNICAL DATA: Clamping Unit: - Clamping force: 6500 kN - Mold opening force: 346 kN - Moving platen displacement force -- opening: 169 kN -- closing: 144 kN - Dimensions of mounting platen (h x v): 1490 x 1440 mm - Clearance between tie-bars (h x v): 1000 x 930 mm - Mold opening stroke: 1150 mm - Minimum mold height: 600 mm - Daylight: 1750 mm Knsdpfx Absvlpcgjkef - Ejector stroke: 250 mm - Ejector force: 226 / 285 kN Injection unit: - Screw diameter: 90 mm - Injection pressure: 1742 bar - Injection volume: 1953 cm³ - Shot weight for PS: 1777 g - Injection rate: 649 cm³/s - Increased injection rate: - Electro-hydraulic equipment: - Rated pump motor power: 90 kW - Installed heater capacity: 44 kW - Number of cylinder heating zones: 7 - Oil tank capacity: 1240 l Dimensions and weight: - Net weight with control cabinet: 39.5 t - Machine dimensions (L x W x H): 9.36 x 2.65 x 2.44 m

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei Robot LRX 500 Year of manufacture: 2011 Hydraulic-mechanical two-plate clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – injection unit control. MC 5 control system with color monitor, integrated control panel, and USB data carrier. Plasticizing Unit Complete plasticizing unit for thermoplastics with 135 mm screw diameter, with non-return valve and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping Unit - Clamping force: kN 8500 - Mold opening force: kN 560 - Platen dimensions (H x V): mm 1600 x 1600 Knjdpfxowkhmmo Abksf - Distance between tie-bars (H x V): mm 1140 x 1140 - Mold opening stroke: mm 1600 - Mold height (min-max): mm 500 – 1100 - Opening width: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200 / 100 Injection Unit - Screw diameter: mm 135 - Injection pressure: bar 1389 - Shot volume: cm³ 8588 - Shot weight for PS: g 6098 - Injection rate: cm³/s 1414 Electro-hydraulic Equipment - Rated pump motor power: kW 132 - Dry cycle time (Euromap 6): 1/h 965 - Hydraulic oil tank capacity: l 2440 Weight and Dimensions - Net weight with control cabinet: t 49 - Footprint dimensions (L x W x H): m 11.72 x 2.92 x 2.71

Sąlyga: geras (naudotas), Gamybos metai: 2006, Krauss Maffei Injection Moulding Machine KM 350 - 2700 C2 Year of manufacture: 2006 Control system: MC 4 Technical details Clamping unit: Clamping force: 3500 kN Maximum mold opening force: 220 kN Moving platen force - Opening: 105 kN Moving platen force - Closing: 95 kN Mold platen size (H x V): 1060 mm x 1095 mm Tie bar spacing (H x V): 710 mm x 710 mm Mold opening stroke: 920 mm Minimum mold height: 380 mm Maximum daylight opening: 1300 mm Hydraulic ejector – stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Injection unit Screw diameter: 80 mm L/D ratio: 20 Injection pressure: 1829 bar Shot volume: 1433 ccm Moulded part weight, PS: 1304 g Injection rate: 513 ccm/s Screw speed: 218 rpm Maximum plasticizing rate: 108 g/s Nozzle pressure: 173 kN Electrical and hydraulic equipment Nominal pump drive power: 75 kW Installed heating capacity: 36 kW Adjustable barrel heating zones: 7 Knsdpfxomki Iue Abksf Oil tank capacity: 720 ltr. Dimensions and weight Machine dimensions: 6.91 m x 2.20 m x 2.41 m Total machine weight: 15300 kg Maximum mold weight: 4780 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Krauss Maffei Injection Moulding Machine KM 300-1000 C2 Year of manufacture: 2006 Clamping Unit: Clamping force: 3000 kN Max. mold opening force: 160 kN Movable platen force - Opening: 86 kN Movable platen force - Closing: 68 kN Mould platen size (H x V): 995 mm x 1050 mm Tie bar spacing (H x V): 630 mm x 630 mm Mould opening stroke: 820 mm Min. mould height: 330 mm Max. daylight: 1150 mm Injection Unit: Screw diameter: 55 mm Ls/D ratio: 20 Kedpfx Aberbhhhekjnf Injection pressure: 1904 bar Shot volume: 523 ccm Shot weight (PS): 476 g Injection rate: 428 ccm/s General Data: Dimensions (m): 5.97 x 2.04 x 2.36 Weight (t): 12.5

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Krauss Maffei KM 1600 – 17200 MX Injection Moulding Machine Year of manufacture: 2016 General Description: Modern injection moulding machine with fully hydraulic clamping system. Equipped with an advanced MC6 control system, based on an industrial computer operating in real-time Ethernet technology. Operation is performed via an integrated 19-inch control panel with a colour touchscreen, LED backlighting, and graphical visualisation of all active processes (ProcessDesigner module). Plasticising Unit: Complete system for processing thermoplastics Screw diameter: 135 mm Version with wear (abrasion) protection Non-return valve Open nozzle Technical Data: Clamping Unit: Clamping force: 16,000 kN Mould opening force: 1,120 kN Platen dimensions (W x H): 2,550 x 2,100 mm Tie bar clearance (W x H): 1,870 x 1,420 mm Opening stroke: 2,700 mm Mould height (min.–max.): 700 – 1,600 mm Max. daylight: 3,400 mm Ejector stroke: 350 mm Ejector force (forward/backward): 300 / 150 kN Injection Unit: Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1,784 bar Shot volume: 9,662 cm³ Knedpfx Aowyw Npjbkef Shot weight for PE: 6,860 g Screw speed (nominal / max.): 81 / 100 rpm Electro-hydraulic Equipment: Main motor power: 160 kW Installed heating power: 93 kW Number of barrel heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 / h Oil tank capacity: 2,400 l Dimensions and Weight: Net weight with control cabinet: 92 t Machine dimensions (L x W x H): 14.17 x 4.04 x 2.93 m

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8M2807A, spaudimo jėga: 8 000 kN, varžto skersmuo: 135 mm, tarpas tarp stulpų: 1 120 mm, įpurškimo slėgis: 1 389 juosta, injekcijos svoris: 6 098 g, TECHNICAL DETAILS Clamping force: 8,000 kN Mold opening force: 560 kN Platen dimensions (H x V): 1,600 mm x 1,530 mm Tie bar spacing (H x V): 1,120 mm x 1,000 mm Maximum mold opening stroke: 1,600 mm Mold height (min. - max.): 500 mm - 1,100 mm Platen opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Injection System Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Shot weight for PS: 6,098 g Screw rotation speed (standard/optional): 121 rpm / 153 rpm MACHINE DETAILS Net weight with control cabinet: 45 t Machine dimensions (L x W x H): 10.81 m x 2.92 m x 2.51 m Electrical/Hydraulic Equipment Rated pump motor power: 110 kW Installed heating capacity: 57 kW Number of cylinder heating zones: 7 Number of dry cycles according to Euromap: 965 cycles/h Oil tank capacity: 1,500 l Ksdpfxjvpg Nfo Abkonf

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61009829, spaudimo jėga: 8 000 kN, varžto skersmuo: 135 mm, tarpas tarp stulpų: 1 120 mm, injekcijos svoris: 6 098 g, išmetimo jėga: 200 N, atvērimo eiga: 2 100 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Mould opening force: 560 kN Platen dimensions (H x V): 1,600 mm x 1,530 mm Tie bar spacing (H x V): 1,120 mm x 1,000 mm Mould opening stroke: 1,600 mm Mould installation height (min. - max.): 500 mm - 1,100 mm Platen opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Injection system Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Shot weight for PS: 6,098 g Screw speed (standard/optional): 121 rpm / 153 rpm Electrical/hydraulic equipment Rated pump motor power: 110 kW Installed heating capacity: 57 kW Number of barrel heating zones: 7 Number of dry cycles according to Euromap: 965 1/h Knedovpg Iuspfx Abkjf Oil tank capacity: 1,500 l MACHINE DETAILS Net weight with control cabinet: 45 t Machine dimensions (L x W x H): 10.81 m x 2.92 m x 2.51 m