Liejimo mašinos, uždarymo jėga 250–999 kN pirkti naudotą (245)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Plastikų apdorojimas ir plastikų technologija Liejimo staklės Liejimo mašinos, uždarymo jėga 250–999 kN
Mažas skelbimas
Łódź
478 km
Liejimo mašina
Engele-victory 200/80
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Engel e-victory 200/80 with Engel Viper 12 robot / All-electric machine / Operating hours: approx. h in automatic mode
Year of manufacture: 2012
Injection unit:
Screw diameter: 30 mm
Shot weight: approx. 71 g
Injection pressure: 2400 bar
Metering volume: 85 cm³
Clamping unit:
Clamping force: 80 t
Tie-bar spacing: 0 x 0 mm
Platen size: 670 x 600 mm
Ejector: electric
Clamping unit: hydraulic
Control system: CC 200 - Touchscreen
Additional Equipment:
Production line with Engel Viper 12
Machine in very good technical condition
All-electric machine: energy-saving and very quiet
Operating hours: approx. in automatic mode
Air valve x 4
Hydraulic core pull x 1
Hot runner control x 12
Injection unit is wear-resistant and corrosion-resistant
Main motor of the machine - servo motor with inverter - energy-saving
Proportional valve on injection unit – precise injection
Kistler sensor – mold pressure control
Parallel movements
Engel Viper 12 robot
Year of manufacture: 2012
5-axis robot: 3 axes driven by servo motors (electric): X, Y, Z; Axis B – pneumatic, and Axis C
Touch control panel
Robot safety package
Robot with adapter, conveyor belt, and safety enclosure
Purchase of robot and conveyor at additional cost
Dimensions:
Weight: 5500 kg
Iodpfxoy Dp Ire Aaujtf
Length/Width/Height: 4.40 x 1.40 x 2.00 m
All offered machines are started and tested by our service technicians prior to sale.
It is possible to receive a video of the technical testing of the selected machine or to participate in live technical tests at our company site in Łódź.
Price: On request.
Mažas skelbimas
Łódź
478 km
Liejimo mašina
Engel Victory500/80 Tech
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Engel Victory 500/80 Tech / Production Line with Engel Viper 12 Robot
Year of manufacture: 2011
Injection Unit:
Screw diameter: 45 mm
Shot weight: approx. 295 g
Injection pressure: 1598 bar
Dosage volume: 318 ccm
Clamping Unit:
Clamping force: 80 t
Tie bar distance: 0x0 mm
Platen size: 670x600 mm
Ejector: hydraulic
Itjdpsy Dp Ilefx Aauef
Clamping unit: hydraulic
Control system: CC 200 - Touchscreen
Additional equipment:
Tie-barless machine
Euromap 67
Robot interface
Hydraulic core pull x 3
Injection unit hardened - bimetal
Engel Viper 12 Robot
Year of manufacture: 2014
5-axis robot: 4 axes driven by servo motors (electric); axis A - pneumatic
Touch control panel
Robot with adapter and safety housing with part separator
Purchase of the robot at an extra charge
Dimensions:
Weight: 5300 kg
Length/Width/Height: 4.57x1.48x2.38 m
Drive:
Pump/motor: 15 kW
All offered machines are started up by our service technicians before sale.
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.
Price: On request
Mažas skelbimas
Łódź
478 km
Liejimo mašina
KraussMaffeiKM 80-180 CX
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Krauss Maffei KM 80-180 CX with Sepro Industrial Robot 55 Sprue Picker
Year of manufacture: 2005
Injection Unit:
Screw diameter: 30 mm
Injection weight: 77.4 g
Injection pressure: 2025 bar
Shot volume: 85 ccm
Clamping Unit:
Clamping force: 80 t
Tie bar spacing: 420x420 mm
Platen size: 670x670 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control: MC V - Touchscreen
Additional equipment:
Euromap 67
Robot interface
Controller with air valve
Hydraulic core pull x 1
Injection unit hardened - bimetallic
Sepro Industrial Robot 55 sprue picker
Year of manufacture: 2018
It is possible to purchase a Moretto brand raw material feeding system at an additional cost.
The set includes:
- Volumetric screw feeder with hopper
- Conveyor with proportional valve
Dimensions:
Weight: 3900 kg
Length/Width/Height: 3.80x1.50x2.10 m
Itjdpfxjy Dp Ifo Aausf
Drive:
Pump/Motor: 15 kW
Heating power: 8.12 kW
Total power: 23.12 kW
All machines offered are started and tested by our service technicians before sale.
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.
Price: On request.

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Łódź
478 km
Liejimo mašina
Demag ErgotechSystem 80/420-430
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Demag Ergotech System 80/420-430
Year of manufacture: 2006
Injection unit:
Screw diameter: 40 mm
Injection weight: 205 g
Injection pressure: 2020 bar
Metering volume: 231 ccm
Clamping unit:
Clamping force: 80 t
Tie bar spacing: 420x420 mm
Platen size: 580x590 mm
Itjdpfsy Dp Hzox Aausf
Ejector: hydraulic
Clamping unit: hydraulic
Control system: NC4
Additional equipment:
Euromap 67
Robot interface
Air valve x 2
Hydraulic core pull x 3
Hot runner control
Injection unit hardened - bimetallic
Integrated printer
Screw diameter exchange possible
Dimensions:
Weight: 4100 kg
Length/Width/Height: 4.10x1.40x1.90 m
All machines offered are test-run by our service technicians prior to sale.
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company location in Łódź.
Price: On request
Mažas skelbimas
Łódź
478 km
Liejimo mašina
KraussMaffeiKM 35-55 CX
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Krauss Maffei KM 35-55 CX / Machine in very good technical condition
Year of manufacture: 2008
Injection unit:
Screw diameter: 18 mm
Shot weight: 18 g
Injection pressure: 2500 bar
Dosage volume: 20 cm³
Clamping unit:
Clamping force: 35 t
Tie bar distance: 320 x 320 mm
Platen size: 540 x 540 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control system: MC V - Touchscreen
Additional equipment:
Machine in very good technical condition
Euromap 67
Robot interface
Air valve x 2
Control system with 6 hot runner zones
Injection unit hardened - bimetallic
The machine has been regularly serviced by Krauss Maffei authorized service in Germany
It is possible to change the screw diameter to 20 mm or 22 mm
Dimensions:
Weight: 2,600 kg
Length/Width/Height: 3.50 x 1.40 x 1.70 m
Drive:
Pump/motor: 11 kW
Isdpoy Dp Huofx Aauetf
Heating capacity: 3.78 kW
Total power: 14.78 kW
All machines offered are started up and tested by our service technicians before sale.
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź.
Price: On request
Mažas skelbimas
Łódź
478 km
Liejimo mašina
Sumitomo DemagIntElekt 50/370-200
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Sumitomo Demag IntElekt 50/370-200 / Elektrinė mašina
Pagaminimo metai: 2009
Įpurškimo agregatas:
Sraigto skersmuo: 25 mm
Įpurškimo svoris: 39 g
Įpurškimo slėgis: 1580 bar
Dozavimo tūris: 44 ccm
Uždarymo agregatas:
Uždarymo jėga: 50 t
Kolonų atstumas: 370x370 mm
Itodpfx Aoy Dp E Roauef
Montavimo plokščių dydis: 520x570 mm
Išstūmėjas: elektrinis
Uždarymo mechanizmas: svirtinis
Valdymas: NC5 - jutiklinis ekranas
Papildoma įranga:
Elektrinė mašina: aukštų apsukų, energiškai taupi ir labai tyli
Euromap 67
Roboto sąsaja
Oro vožtuvas x 4
Valdymas su karštais kanalais
Įpurškimo agregatas grūdintas - bimetalinis
Centrinis tepimas
Galima pakeisti sraigto skersmenį
Matmenys:
Svoris: 4750 kg
Ilgis/plotis/aukštis: 4.20x1.26x1.84 m
Pavara:
Šildymo galia: 5,7 kW
Visos siūlomos mašinos prieš pardavimą yra paleidžiamos mūsų servisų technikų.
Galima gauti pasirinktos mašinos techninių bandymų vaizdo įrašą arba dalyvauti techniniuose bandymuose gyvai mūsų įmonėje Lodzėje.
Kaina: pagal užklausimą
Mažas skelbimas
Łódź
478 km
Liejimo mašina
Demag ErgotechCompact 250-80
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 1995, Demag Ergotech Compact 250-80
Year of manufacture: 1995
Injection Unit:
Screw diameter: 18 mm
Shot weight: 20 g
Injection pressure: 2400 bar
Dosage volume: 22.8 ccm
Clamping Unit:
Clamping force: 25 t
Tie bar distance: 280x280 mm
Platen size: 410x410 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control: NC4
Additional equipment:
Air valve x 2
Hydraulic core pull x 1
Injection unit hardened – bimetallic
Original Demag mold crane: chain, electrically controlled, 2 lifting speeds
Dimensions:
Weight: 2600 kg
Length/Width/Height: 3.20x1.30x1.80 m
Drive:
Pump/Motor: 7.5 kW
Itsdsy Dp E Depfx Aaujf
Heating capacity: 3.7 kW
Total installed power: 11.2 kW
All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź.
Price: On request
Mažas skelbimas
Łódź
478 km
Liejimo mašina
BoyXS
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, Boy XS / Puiki techninė būklė
Pagaminimo metai: 2020
Įpurškimo mazgas:
Sraigtelio skersmuo: 12 mm
Itjdpey Dp Ewofx Aausf
Įpurškimo svoris: 4,1 g
Įpurškimo slėgis: 3128 bar
Dozavimo tūris: 4,5 ccm
Uždarymo mazgas:
Uždarymo jėga: 10 t
Stulpelių tarpas: 160 mm
Tvirtinimo plokščių matmenys: 321x246 mm
Išstūmėjas: hidraulinis
Uždarymo mazgas: hidraulinis
Valdymas: Procan Alpha 4 – liečiamasis ekranas
Papildoma įranga:
Mašina kaip nauja
Euromap 67
Roboto sąsaja
Oro vožtuvas x 6
Integruotas šoninis bėgio atskyriklis
Automatinė Wittmann padavimo sistema su Farratech prekės ženklo džiovintuvu
Galimybė įsigyti AMF įrankio tvirtinimo elementus
Matmenys:
Svoris: 450 kg
Ilgis/Plotis/Aukštis: 1.48x0.52x1.38 m
Visos siūlomos mašinos prieš pardavimą paleidžiamos mūsų serviso technikų.
Galite gauti pasirinktos mašinos techninių bandymų vaizdo įrašą arba dalyvauti techniniuose bandymuose gyvai mūsų įmonėje Łódź mieste.
Kaina: pagal užklausimą
Mažas skelbimas
Łódź
478 km
Liejimo mašina
Boy55 A PRO
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition
Year of manufacture: 2017
Ijdpfx Aajy Dp Edsuotf
Injection unit:
Screw diameter: 38 mm
Shot weight: 123.9 g
Injection pressure: 1,508 bar
Metering volume: 136.1 ccm
Clamping unit:
Clamping force: 55 t
Tie bar spacing: 360x335 mm
Platen size: 665x600 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control system: Procan Alpha - touchscreen
Additional equipment:
Machine in very good technical condition
Operating hours: 16,624 in automatic mode
Pneumatic core pull x 2
Hardened injection unit - bimetallic
The machine has been regularly serviced by authorized Boy service in France
It is possible to change the screw diameter to Ø 32 mm or 42 mm
Dimensions:
Weight: 2,430 kg
Length/Width/Height: 3.25x1.14x2.02 m
Drive:
Pump/Motor: 11 kW
Heating capacity: 7.7 kW
Total connected load: 18.7 kW
All machines offered are started up by our service technicians before sale.
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.
Price: On request
Mažas skelbimas
Łódź
478 km
Liejimo mašina
Boy55A Pro
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition
Year of manufacture: 2017
Injection unit:
Screw diameter: 38 mm
Shot weight: 123.9 g
Injection pressure: 1,508 bar
Metering volume: 136.1 cc
Clamping unit:
Clamping force: 55 t
Tie bar distance: 360 x 335 mm
Platen size: 665 x 600 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control system: Procan Alpha - touchscreen
Additional equipment:
Machine in very good technical condition
Operating hours: 17,083 in automatic mode
2 x pneumatic core pulls
Injection unit hardened - bimetallic
The machine has been regularly serviced by authorized Boy service in France
It is possible to change the screw diameter to 32 mm or 42 mm
Dimensions:
Weight: 2,430 kg
Length/Width/Height: 3.25 x 1.14 x 2.02 m
Drive:
Pump/motor: 11 kW
Heating capacity: 7.7 kW
Itsdpsy Dp D Tjfx Aauef
Total power: 18.7 kW
All offered machines are started up and tested by our service technicians prior to sale.
A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź.
Price: On request
Mažas skelbimas
Łódź
478 km
Liejimo mašina
Boy80 M
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Boy 80 M
Year of manufacture: 1997
Injection Unit:
Isdpfx Aasy Dp Dteujtf
Screw diameter: 36 mm
Shot weight: 132 g
Injection pressure: 2085 bar
Dosage volume: 147.6 cc
Clamping Unit:
Clamping force: 80 t
Tie bar distance: 410x358 mm
Platen size: 680x555 mm
Ejector: hydraulic
Clamping unit: toggle lever
Control System:
Procan CT
Additional Equipment:
*
Dimensions:
Weight: 3200 kg
Length/Width/Height: 4.14x1.21x2.07 m
Drive:
Pump/motor: 15 kW
Heating power: 10.4 kW
Total power: 25.4 kW
All offered machines are started up by our service technicians before sale.
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź.
Price: On request
Mažas skelbimas
Łódź
478 km
Liejimo mašina
Boy55 A PRO
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition
Year of manufacture: 2016
Injection unit:
Screw diameter: 38 mm
Shot weight: 123.9 g
Injection pressure: 1508 bar
Dosage volume: 136.1 ccm
Clamping unit:
Clamping force: 55 t
Tie bar spacing: 360x335 mm
Platen size: 665x600 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control system: Procan Alpha - Touchscreen
Additional equipment:
Machine in very good technical condition
Iodjy Dp Dgepfx Aauetf
Operating hours: 18,153 in automatic mode
Pneumatic core x 2
Injection unit hardened – bimetallic
The machine has been regularly serviced by authorized Boy service in France
It is possible to change the screw diameter to 32 mm or 42 mm
Dimensions:
Weight: 2430 kg
Length/Width/Height: 3.25x1.14x2.02 m
Drive system:
Pump/Motor: 11 kW
Heating capacity: 7.7 kW
Total power: 18.7 kW
All offered machines are started up by our service technicians prior to sale.
It is possible to receive a video of the selected machine’s technical tests or to participate in live technical tests at our facility in Łódź.
Price: On request
Mažas skelbimas
Łódź
478 km
Liejimo mašina
Cronoplast S.L. BabyPlast6/10 Vp-T⌀12
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production Line with Robot, Rotary Table, and Additional Automation
Year of manufacture: 2011
Clamping Unit:
Clamping force: 6.25 t
Clamping system: hydraulic
Control system: BABYPLAST - Touchscreen
Additional Equipment:
Production line with robot, rotary table, and additional automation
Vertical injection molding machine
Air valves
Injection for parting line
Automatic adjustment of injection unit settings (up - down)
The rotary table is driven by a servo motor, controlled via frequency inverter – highly precise
Automatic parts feeding with quality control system
Operator workstation protected with safety package
Dimensions:
Weight: 350 kg
Length/Width/Height: 0.70x1.00x1.65 m
All machines offered are started up by our service technicians prior to sale.
Iedpfey Dp Apex Aauotf
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.
Price: On request
Mažas skelbimas
Łódź
478 km
Liejimo mašina
Boy90 M
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Boy 90 M
Year of manufacture: 2004
Injection Unit:
Screw diameter: 42 mm
Shot weight: 193 g
Injection pressure: 1,724 bar
Dosage volume: 214.7 ccm
Clamping Unit:
Clamping force: 90 t
Tie bar distance: 430x360 mm
Itsdpfx Aoy Dpz Ssauef
Platen size: 635x610 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control: Procan - Touchscreen
Additional equipment:
Euromap 12
Robot interface
Air valve x 1
Dimensions:
Weight: 3,100 kg
Length/Width/Height: 4.37x1.21x2.20 m
Drive:
Pump/Motor: 15 kW
Heating capacity: 11.3 kW
Total power: 26.3 kW
All machines offered are started up by our service technicians before sale.
It is possible to obtain a video of the technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź.
Price: On request
Mažas skelbimas
Łódź
478 km
Liejimo mašina
LWB SteinlVCRS-T 300/36 T
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, LWB Steinl VCRS-T 300/36 T / Mašina kaip nauja
Pagaminimo metai: 2006
Įpurškimo vienetas:
Dozavimo tūris: 36 ccm
Uždarymo vienetas:
Uždarymo jėga: 30 t
Išstūmėjas: hidraulinis
Uždarymo vienetas: hidraulinis
Valdymas: LWB ECO
Papildoma įranga:
Hidraulinė šerdis x 1
Valdymas su oro vožtuvu
Įpurškimo vienetas pagamintas iš bimetalo
Matmenys:
Svoris: 3000 kg
Visos siūlomos mašinos prieš pardavimą paleidžiamos mūsų serviso technikų.
Yra galimybė gauti pasirinktos mašinos techninių bandymų vaizdo įrašą arba dalyvauti techniniuose bandymuose gyvai mūsų įmonėje Lodzėje.
Iedsy Dpzlspfx Aauetf
Kaina: pagal užklausą
Mažas skelbimas
Trenčianske Stankovce
811 km
Engel Victory 200H200V/90 Kombi (2009)
EngelVictory 200H200V/90 Combi
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2009, Spaudimo jėga: 90 t
Varžto skersmuo: 30 mm
Tipas: Daugiadalis
Ijdpfx Aaoy Duaajuetf
Pavara: Hidraulinė
Mažas skelbimas
Trenčianske Stankovce
811 km
Arburg 370S 700-290U (2016) universalioji mašina, tik 23 000 valandų
Arburg370S 700-290U
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 700 kN, Įranga: dokumentacija / vadovas, Seologica valdymas
Užspaudimo jėga: 70 t
Sraigto skersmuo: 40 mm (aukšto stiprumo)
Atstumas tarp kolonų V: 370 mm
Atstumas tarp kolonų H: 370 mm
Iedpfxoygtque Aauetf
Kolonų tarpai: 370x370 mm
Plokščių HxV: 510x510 mm
Formos storis min-max: 200
Eiga: 400 mm
Šūvio tūris: 188 cm3
Tipas: Uni
Pavaros tipas: Hidraulinis
Oro vožtuvas: 1
Valandos: 23000
2 servosiurbliai
4 laisvos aušinimo grandinės
6 elektrinės formos kaitinimo zonos
Mažas skelbimas
Hannover
979 km
Liejimo mašina
Arburg270C 400-70
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 203129, spaudimo jėga: 400 kN, varžto skersmuo: 18 mm, darbinio tūrio: 23 cm³, Here we are offering the following well-maintained, pre-owned injection moulding machine as part of our business specialised in used injection moulding machinery.
Of course, we also purchase well-maintained injection moulding machines with a year of manufacture from 2010 onwards.
We have been a wholesale dealer for injection moulding machines for over 25 years.
Manufacturer: Arburg
Model: 270C 400-70
Control unit: Selogica
Year of manufacture: 2007
Operating hours: 89,470 h, screw and barrel replaced
Machine number: 203129
Extras:
- Robot interface
- Highly wear-resistant screw
- CF drive
- Complete documentation and software (on CF card)
- Diverter valve
This machine is equipped with retrofitted interfaces for:
- Mould temperature control
- Heating channel
- Colour dosing/colouring
(Siemens Logo PLC control)
German language
- From first ownership – origin Germany
Regular maintenance by the manufacturer and previous owner.
Clamping unit:
Clamping force: 400 kN / 40 t
Tie bar distance: 270 x 270 mm
Mounting platens: 446 x 446 mm
Opening stroke: 350 mm
Minimum mould height: 200 mm
Max. daylight between platens: 550 mm
Ejector stroke: 125 mm
Ejector force: max. 30 kN
Injection unit:
Screw diameter: 18 mm
Injection volume: 23 cm³
Shot weight: 21 g
Injection pressure: 2,500 bar
Electrical:
Pump: 11 kW
Heating: 4 zones, 4 kW
Installed load: 15 kW
Pre-fuse: 50A
Weight: 2,150 kg
Warranty:
Warranty up to initial commissioning
Loading / Shipping:
Loaded free on truck provided by buyer, or free delivery within Germany (freight at cost), ex-stock Hannover, Germany.
Please note in regard to our offered machines and company:
- We only sell machines purchased directly from ongoing production, ex our warehouse in Hannover
- All offered machines are inspected and tested prior to dismantling
- We do NOT deal in insolvency assets and are NOT brokers trading in third-party property
- All machines come from successful businesses where regular maintenance is a given
- All machines offered are available for inspection at our warehouse
Iedpfsx Rvcijx Aaujtf
Mažas skelbimas
Hannover
979 km
Liejimo mašina
KraussMaffeiEX 80-380 vollelektrisch/full electrical
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, veikimo valandos: 35 808 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, darbinio tūrio: 204 cm³, įpurškimo slėgis: 1 860 juosta, injekcijos svoris: 186 g, Here we present the following well-maintained used injection moulding machine available from our trading stock as specialists in injection moulding machines.
We also actively purchase well-maintained injection moulding machines from model year 2010 onwards.
We have been wholesalers of injection moulding machines for over 25 years.
Manufacturer: KraussMaffei
Model: KM EX 80-380 (fully electric)
Serial number: 61013142
Year of manufacture: 2009
Operating hours: 35,808 h
Control system: MC 5
Fully functional
Condition: Very well maintained
Machine comes from first German ownership
xxxxx Without robot / without temperature control unit xxxxx
Extras:
- Pneumatic needle shut-off nozzle
- Pneumatic valve 1 on BWAP
- Pneumatic control for 1 hot runner
- Pneumatic control for hot runner and cold runner
- Reject sorting chute
Isdpfx Aaoyrd U Usustf
- Nozzle protection gate – ejector area safety gate foldable
- Euromap interface 18 on FWAP
- Electric ejector plate on BWAP
- Hydraulic auxiliary unit for hydraulic core pulls
- Injection compression moulding circuit
- 2 x hydraulic core pulls (on BWAP and FWAP)
- Pressure relief for core pulls on BWAP and FWAP
- 8-way water manifold
- 8 temperature control zones for hot runner
- Extrusion injection circuit with position control
- 3 x 230V sockets (2 x CEE 16A / 1 x CEE 32A)
- EUROMAP 67 signal interface for robot
- Start-up sequence, QA package, cycle time analysis, cycle memory, event log
- BluePOWER package: energy consumption display
- Graphic analysis package, trend graph
- Interface for temperature control unit
- Cycle time analysis, optimised actual cycle value
Machine language: German
Injection unit:
Screw diameter: 40 mm
Shot weight: 186 g/PS
Injection pressure: 1860 bar
Injection volume: 204 ccm
Clamping unit:
Clamping force: 80 tons / 800 kN
Tie bar spacing: 420 x 420 mm
Platen dimensions: 655 x 670 mm
Tool installation height: 250 mm
Max. platen distance: 750 mm
Ejector stroke/force: 100 mm / 22 kN
Fully electric clamping unit
Warranty
Warranty up to first commissioning
Loading/shipping
Free loaded onto buyer’s truck or free delivered nationwide against freight reimbursement
Available from our warehouse in Hanover, Germany
Mažas skelbimas
Hannover
979 km
Įpurškimo liejimo mašina
Ferromatik MilacronK75-S 2Farben L-Aggregat
Skambinti
Būklė: geras (naudotas), Gamybos metai: 1996, veikimo valandos: 32 750 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 266568, spaudimo jėga: 750 kN, varžto skersmuo: 3 025 mm, darbinio tūrio: 8 549 cm³, Here we offer a very well-maintained, continuously serviced injection moulding machine. We are also happy to accept well-maintained machines from year 2005 onwards as trade-ins. Please offer us any machines you will be releasing soon.
Fully operational 2-colour injection moulding machine
K75-S 2F in L-configuration
Year of manufacture: 1996
International size: 750H 200/100 L
Operating hours: 32,750 h
Control unit: IQT 6 (German language)
Machine No.: 266568
Clamping unit (extended tie bars +200mm)
Clamping force: 750 kN/ 75 tons
Tie bar distance: 420 x 420 mm
Max. daylight: 850 mm
Minimum mould installation height: 400 mm
Mounting plates: 605 x 605 mm
Ejector force: 34 kN
Ejector stroke: 150 mm
Centricity: 125 mm (nozzle/ejector plate)
Injection units
+++1st unit+++
Horizontal injection unit (intern. size 200)
Screw diameter: 30 mm
Shot volume: 85 cm³
Injection pressure: 2350 bar
4 heating zones
+++2nd unit+++
Vertical injection unit (intern. size 100)
Screw diameter: 25 mm
Shot volume: 49 cm³
Injection pressure: 2022 bar
3 heating zones
Extras
- Pressure vessel
- Core puller
- Water distributor
- Hopper
Dimensions / Electrical
Motor: 30 kW
Heating: 11.7 kW
Weight: 5,100 kg
Itsdjcud Nhjpfx Aausf
Dimensions: 4.5 x 1.5 x 2.5 m (L x W x H)
Paintwork: RAL 7016, 7035, 1012
Availability
Available ex our warehouse in Hanover, loaded free onto buyer’s truck or delivered free to destination, insured, with freight cost reimbursement.
ALL MACHINES WE OFFER ARE SOLELY OWNED BY US.
Mažas skelbimas
Hannover
979 km
Įpurškimo liejimo mašina
Engel200/80 Tech CC200
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, veikimo valandos: 69 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 163769, Here we offer a well-maintained injection moulding machine for sale.
We are also happy to accept well-maintained machines from year of manufacture 2005 onwards in part exchange. Please offer us your surplus machines.
Manufacturer: Engel
Model: Victory 200/80 Tech
Year of manufacture: 2006
Control system: CC 200
Machine number: 163769
Operating hours: approx. 69,000
Extras
- Installed languages: German, English
- 25 mm screw (wear- and corrosion-protected)
- CC200 control system
- Enlarged clamping plates (B-plates)
- Minimum installation height: 250 mm
- Maximum platen separation: 700 mm
- Quality diverter / PD-protocol + graphics
- 5 x CEE 400 V / 3 x Schuko 230 V
Itsdom Nclvjpfx Aauof
- 4 freely programmable inputs and outputs
- Euromap 12 handling interface
- Engel EMS host computer interface
- Without material hopper or conveyor unit
(Screw and cylinder replaced, pump replaced, processed PE and PP)
Clamping unit
Clamping force: 80 tonnes / 800 kN
Tie bar spacing: tie-barless
Clamping plate size: 730 x 600 mm (h x w)
Maximum platen distance: 700 mm
Minimum installation height: 250 mm
Opening stroke: 450 mm
Injection unit
Screw diameter: 25 mm
Shot volume: 69 cm³
Injection pressure: 2090 bar (2400 bar with upgrade)
Weight: 5,200 kg
Dimensions: 4.00 m x 1.40 m x 2.00 m (L x W x H)
Ex our warehouse in Hanover / Germany – free loaded onto buyer’s truck or free delivered within Germany subject to freight reimbursement
Inspection under power possible
If a factory-trained technician commissions the machine, the customer receives full warranty until successful commissioning. No further warranty or guarantee applies beyond commissioning. Age- and usage-related wear is accepted. The costs for engaging the manufacturer’s technician or subsequent electrical specialist are borne by the customer.
Important information about our machines and our company:
- We only sell machines from our own inventory, previously acquired from ongoing production, from our warehouse in Hanover
- All offered machines are checked and tested before dismantling
- We do NOT sell insolvency goods – we are NOT brokers dealing in third-party property
- All offered machines come from successful companies for whom regular maintenance and care is standard
- All offered machines are available for inspection at our warehouse
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Hannover
979 km
Įpurškimo liejimo mašina
Engele-max 200/100 m. GEKU Robot- Reinraum
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, veikimo valandos: 58 000 h, Funkcionalumas: visiškai funkcionalus, Superbly maintained injection moulding machine from cleanroom (pharmaceutical production)
- Fully operational with functional guarantee
- Equipped with GEKU SR 500 ST linear robot
- Excellent optical condition
Technical Details
Manufacturer: Engel
Type: e-max 200/100
Serial number: 170609
Year of manufacture: 2008
Operating hours: approx. 58,774 h
Dimensions (L/W/H): 4.0 x 1.3 x 1.9 m
Weight: 3,900 kg
Functionality: fully operational
Condition: excellent, cleanroom standard
Special Features
Control unit: CC200
Screw diameter: 25 mm
Shot weight: 55 g/PS
Injection pressure: 2,400 bar
Injection volume: 59 cc
Clamping force: 1,000 kN / 100 t
Tie-bar spacing: 460 x 410 mm
Mounting plates: 650 x 600 mm
Mould height: 150–450 mm
Max. platen distance: 800 mm
Opening stroke: 350 mm
Ejector stroke / force: 100 mm / 25 kN
Clamping unit: electric
Connected load: 45 kW
Rated current: 69 A
The machine is immediately available in our warehouse in Hanover, Germany and has been tested.
Extras
GEKU Robot
Model: SR 500 ST
Control: Simotion
X-axis: 600 mm
Isdpoubamvefx Aaujtf
Y-axis: 1400 mm vertical
Z-axis: 2500 mm horizontal
A swivel axis: SWM 45
C-axis: Servo
Gripper: SWS16
B-axis: not available
Warranty
Warranty valid until first commissioning
Loading/Shipping
FCA - Free loaded on buyer's truck or free home delivery against reimbursement of freight costs from our warehouse in Hanover, Germany
Financing
On request - Lease-purchase option available
Price: on request
Mažas skelbimas
Hannover
979 km
Įpurškimo liejimo mašina
KraussMaffeiKM 65-160 C2
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Here we offer a very well-maintained, continuously serviced injection moulding machine.
We are also happy to take well-kept machines from year of manufacture 2010 onwards in part exchange. Please offer us your available machines.
Complete servicing by manufacturer ongoing.
Injection Moulding Machine Krauss Maffei KM65-160 C2
Injection Moulding Machine:
Manufacturer / Model: Krauss Maffei KM65-160 C2
Serial No.: 61007063
Year of manufacture: 2005
Control unit: MC4
Fully serviced annually by the manufacturer
Clamping Unit:
Clamping force: 650 kN / 65 tons
Tie bar spacing: 405 x 405 mm
Min. mould installation height: 250 mm
Max. platen open daylight: 750 mm
Mounting platen (standard): 610 x 610 mm
Ejector stroke: 150 mm
Core pull: 1x unit
Injection Unit:
Injection unit size / Cylinder Ø: 160 /
Cylinder diameters: Ø25mm and Ø18mm
Max. shot weight (Ø25): 47g/PS
Injection rate: 63 cm³/sec
Max. specific injection pressure: 2500 bar
Handling interface: Euromap 12
Dosing unit interface: Yes
Dimensions & Weights:
Weight with control cabinet: 3.8 t
Length: 3800 mm
Width (machine only): 1050 mm
Height: 1890 mm
Oil volume: 270 L
Location: Hannover / Lower Saxony
The machine is in excellent condition and can be inspected under power.
Any illustrated peripheral devices are NOT included in the offer!
The machine is immediately available from our warehouse
Free loading onto buyer’s truck, or free delivery within Germany against reimbursement of freight costs.
Ijdpfxjh Dp R Ej Aaustf
About the machines and our company:
- We exclusively sell machines acquired from our own running production, directly from our warehouse in Hannover.
- All offered machines are inspected and tested before removal.
- We do NOT sell insolvency assets – we are NOT brokers dealing in third-party property.
- All offered machines are sourced from successful companies for whom regular maintenance and servicing are standard.
- All offered machines can be inspected at our warehouse.
Mažas skelbimas
Hannover
979 km
Liejimo mašina
Arburg370S 700-290 horiz. vertical
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, veikimo valandos: 40 226 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 221240, varžto skersmuo: 40 mm, injekcijos svoris: 172 g, Here we offer, as a specialist dealer in injection moulding machines, the following well-maintained used injection moulding machine:
Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards.
We have been a wholesaler of injection moulding machines for over 25 years.
Manufacturer: Arburg
Model: 370S 700-290 with vertical injection unit
Serial number: 221240
Year of manufacture: 2012
Operating hours: 40,226 h
Control system: Selogica
Dimensions (L/W/H): 3.92 x 1.45 x 2.02 m
Weight: 3,300 kg
Fully operational
Condition: very well maintained
Extras:
- Device for vertical injection
- 1 core pull circuit
- Additional heater band connection
- 5 free manually regulated cooling circuits
- Air valve connection controllable via Selogica
- Equipment packages: quality assurance, documentation, extended monitoring, production control, etc.
- Flexible parts chute
- High-wear resistant screw
- CF drive system
- Complete documentation and software (on CF card)
- German language
- Single owner – originally supplied in Germany
- Regular maintenance by manufacturer and previous owner
Injection unit:
- Screw diameter: 40 mm
- Shot weight: 172 g/PS
- Injection pressure: 1,530 bar
- Injection volume: 188 cm³
Clamping unit:
- Clamping force: 70 t / 700 kN
- Tie bar spacing: 370 x 370 mm
- Mounting plates: 510 x 510 mm
- Mould height: 200 mm
- Max. platen distance: 600 mm
- Ejector stroke/force: 125 mm / 30 kN
- Hydraulic clamping unit
Motor power: 15 kW
Heating power: 7.7 kW (5 zones)
Total connected load: 23 kW
Itodewg Tt Repfx Aausf
Warranty:
- Warranty valid up to initial commissioning
Loading/Shipping:
- Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges
- Available from our warehouse in Hannover, Germany
Additional photos to follow.
Further information about the machines we offer and our company:
- We only sell machines purchased from ongoing production, from our own stock in Hannover
- All machines offered are inspected and tested prior to dismantling
- We do NOT sell insolvency goods - we are NOT brokers trading third-party assets.
- All machines come from reputable companies where regular maintenance and servicing are the norm
- All offered machines are available for inspection at our warehouse
Mažas skelbimas
Trenčianske Stankovce
811 km
Engel Victory 330H/200V/80 combi (2016)
EngelVictory 330H/200V/80 combi
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Uždarymo jėga: 80 t
Iedpfxoyyzzve Aaujtf
Darbo valandos: 28 911 h
Tipas: daugiakomponentis
Pavara: hidraulinė
Mes supaprastiname jums paiešką
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota liejimo mašinos, uždarymo jėga 250–999 kN (245)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:
- As 1050
- Ex Kambarių Lempai
- Fngj 20
- Ga 11 Ff
- German
- Hh Saugiklis
- Hsc 20 Linear
- Idx 23
- Kaip Susisiekti Su Kopijavimo Rėmai

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo






























































































































































































































































