Horizontali juostiniai pjūklai – visiškai automatiniai – apvali pjovimo zona nuo 400 mm pirkti naudotą (87)

Būklė: naujas, Gamybos metai: 2025, Cutting range round: 420 mm Cutting range square (W x H): 420 x 420 mm Smallest cuttable size: 10 x 10 mm Clamping range: 0 - 420 mm Bundle cutting range (min. W x H – max. W x H): 160 x 130 – 260 x 160 mm Shortest length of cut piece: 5 mm Shortest remnant length in automatic operation*: 190 mm Shortest remnant length in single cut: 20 mm Length: 2220 mm Width incl. chip conveyor: 3050 mm Height: 2100 mm Material support height: 860 mm Machine weight approx.: 2850 kg Total connected load: 9.5 kW Saw motor power: 7.5 kW Hydraulic motor power: 1.5 kW Infinitely variable cutting speed: 20 – 80 m/min Saw feed speed: 1 – 300 mm/min Automatic material feed length, single stroke: 500 mm Automatic material feed length, multiple stroke: 9999 mm Saw blade dimensions: 5150 x 41 x 1.3 mm Standard equipment CE-certified Saw MasterCE electrical safety Permanent magnet synchronous motor Saw frame anti-collision detection Gksdpfx Aewqchxefqob LED work light HMI + buttons Frequency inverter Hydraulic blade tensioning Vice differential pressure valves Automatic chip conveyor (spiral) Vice pressure regulator Motorized chip brush Cooling fan for hydraulics Roller work table Hydraulic feed Main drive precision gearbox Segmented vice clamping 40 L chip collection container Toolbox (wire brush, leveling pads, touch-up paint) One-piece saw band Optional equipment UL electrical safety Laser line projection Saw blade break detection Saw depth control Deviation detector Hydraulic blade guide tensioning Upper clamp Servo feed Moveable guide arm, hydraulically clamped Moveable chip collection container 70 L

Būklė: naudotas, Gamybos metai: 2009, Cutting diameter: 15 - 560 mm Cutting range at 90 degrees, flat: 560 x 630 mm Saw blade dimensions: 7,400 x 54 x 1.60 mm Control system: KASTO Material feed - single stroke: 900 mm Multiple-feed length, max.: 9,999 mm Minimum cut length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 - 127 m/min Material support height: 700 mm Total power requirement: 12.00 kW Gkedpovxwkfsfx Afqjb Machine weight: approx. 6.00 t Space requirement: approx. 3.70 x 2.50 x H2.50 m Double-column automatic bandsaw with KASTO Compact Control; frequency-controlled saw drive; minimum quantity lubrication; chip conveyor; 6m powered feed conveyor + 3x short roller conveyor 1m; 2m discharge conveyor; machine can be inspected under power.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, valdymo tipas: CNC valdymas, bendras svoris: 6 300 kg, paskutinio kapitalinio remonto metai: 2025, automatizacijos lygis: automatinis, AMADA HFA 530 CNC – Fully Automatic CNC Band Saw Refurbished in 2025 | Ready for Immediate Use The AMADA HFA 530 CNC is a fully automatic CNC band saw designed for precise metal cutting, series production, and heavy-duty industrial applications. Thanks to its robust construction weighing 6.3 tons and a state-of-the-art CNC control system, this machine delivers stable, accurate, and repeatable cutting results. Main features and benefits: ● Fully automatic CNC band saw for metalworking ● Fully refurbished in 2025 – machine ready for immediate use ● Heavy-duty, stable construction, machine weight 6.3 t, low center of gravity ● Rigid machine frame minimizes vibration and improves cut quality ● Large cutting capacity: - Round stock up to Ø 530 mm - Square/rectangular stock up to 530 × 530 mm ● Hydraulic blade tensioning for consistent cutting accuracy and increased blade life ● Infinitely variable blade speed via frequency inverter (15–120 m/min) ● Table load capacity up to 4,000 kg – ideal for heavy workpieces ● Minimum cut length 10 mm, optimal for series and batch production ● Modern CNC control: - Quick and easy programming - Automatic sawing cycles - High productivity and repeatability Technical data: ● Cutting capacity: - Round stock: 30–530 mm - Rectangular stock (W × H): 30 × 30 – 530 × 530 mm ● Table load: 4,000 kg ● Saw blade dimensions: 67 × 1.6 × 6,670 mm ● Blade speed: 15–120 m/min, frequency controlled ● Blade tension: hydraulic ● Mains connection: 400 V ● Minimum cut length: 10 mm ● Control: CNC ● Power rating: 13 kW Gkedpfx Aeyat Utefqjb ● Machine weight: 6.3 t Condition and availability: ● Machine completely overhauled in 2025 ● Fully functional and tested ● Immediately available Contact us for pricing, inspection, or further technical information.

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 4 mėnesiai nuo užsakymo Kilmės šalis: Turkija Kaina: 27 600 € Lizingo įmoka: 527,16 € Pjūklo rėmas su dviguba kolonos kreipiančiąja Pjūklo juostos matmenys: 5750 x 41 x 1,3 mm Juostos greitis reguliuojamas be pakopų: 15–120 m/min Pjovimo galia 0° apskritas: 460 mm Pjovimo galia 0° kvadratinis: 460 mm Pjovimo galia 0° plokščias: 520 x 460 mm Darbinis aukštis: 585 mm Hidraulinio variklio galia: 0,55 kW Variklis: 4 kW Aušinimo siurblio variklis: 0,12 kW Ilgis: 3000 mm Plotis: 1200 mm Aukštis: 1800 mm Svoris: 1650 kg Volelių padavimas su rankiniu būdu reguliuojamu sustojimu ir mikro jungikliu Detalų skaitiklis Linijinis kreiptuvas 41 mm pjūklo juosta Valdymo pultas Hidraulinis spaustuvas Hidromechaninė juostos įtempimo sistema Pavarų dėžė skirta didelėms apkrovoms Aušinimo įrenginys Mechaninis viršutinis įtvirtinimas Slėgio reguliavimas Inverteris bepakopiam juostos greičiui 1,2 m ritininis takelis Drožlių šepetys Optinis aukščio nustatymas Eksploatavimo instrukcija vokiečių arba anglų kalba Gsdpsynnhqsfx Afqokb PASIRINKTINAI: Ritininiai takeliai ir pjūklo juostos pagal užklausą

Būklė: labai geros būklės (naudotas), Fully hydraulic heavy-duty band saw in the heaviest design, with a horizontally parallel-moving saw blade, for cutting profiles, pipes, and solid materials of all grades—including extremely hard-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bimetal and carbide-tipped saw blades. The saw unit is constructed from solid polymer concrete, providing maximum running smoothness and extended blade life. The saw unit is guided via two vertical square columns (twin-column guide) with hardened and ground guideways. Hydraulic blade tensioning and hydraulically preloaded carbide blade guides. Material clamping is achieved using two hydraulic vices. The control system enables simple machine operation. Cutting length can be set using a counter with 0.1 mm resolution. Piece count is managed by a counter that automatically stops the machine upon reaching the preset quantity. Material feed is controlled by a hydraulic cylinder to ensure maximum cutting accuracy. The machines are easy to operate and fully automatic. KASTO – fully hydraulic horizontal band saw automatic machine HBA 420 AU CNC (420 mm x 420 mm / Ø 420 mm) Fully hydraulic heavy-duty horizontal band saw automatic machine in the heaviest design, with horizontally parallel-moving blade for cutting profiles, pipes, and solid materials of all grades, including extremely hard-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for bimetal and carbide-tipped saw blades. The saw unit is made entirely of polymer concrete for maximum vibration damping and long blade life. Guided by two vertical square columns (twin-column guide) with hardened and ground guideways. Hydraulic blade tensioning and hydraulically preloaded carbide blade guides. Material clamped via two horizontal hydraulic vices. Material feed by integrated non-driven roller conveyor with twelve transport rollers, allowing easy handling of short offcuts. Cutting capacity, round: 420 mm Cutting capacity, square: 420 x 420 mm Godovzlgaspfx Afqskb Automatic material feed: 600 mm Multiple feed length: 9999 mm Cutting speed, infinitely variable: 20–130 m/min Total drive power: 8 kW Saw motor drive power: 5.5 kW Clamping pressure reduction: Infinitely adjustable Material support height: 700 mm Saw blade dimensions: 6300 x 41 x 1.3 mm Shortest cut-off length (automatic): 6 mm Rest piece length (automatic): 100 mm Voltage: 400 V / 50 Hz Dimensions (L x W x H): 3050 x 2420 x 2130 mm Weight: 2920 kg Year of manufacture: 1995 Accessories: Chip conveyor, coolant system Special accessories: - Powered roller conveyor - CNC control - Frequency-controlled drive - Material end detection by light barrier - Cutting speed and feed regulated

Būklė: naujas, Gamybos metai: 2025, Cutting range round: 530 mm Cutting range square (W x H): 530 x 530 mm Smallest cuttable size: 20 x 20 mm Clamping range: 0 - 530 mm Bundle cutting range (min. W x H - max. W x H): 145 x 110 - 270 x 200 mm Shortest length of cut-off piece: 5 mm Shortest remnant length in automatic operation*: 190 mm Shortest remnant length in manual cut: 20 mm Length: 2220 mm Width incl. chip conveyor: 3530 mm Height: 2530 mm Machine weight approx.: 3700 kg Total connected load: 11.5 kW Saw motor power: 7.5 kW Hydraulic motor power: 1.5 kW Infinitely variable cutting speed: 20 - 80 m / min Saw feed speed: 1 - 300 mm / min Automatic material feed length, single stroke: 500 mm Automatic material feed length, multiple stroke: 9999 mm Saw blade dimensions: 6300 x 54 x 1.6 mm Standard equipment Fully enclosed safety guard compliant with CE standard JLH-EHA Saw Master CE Electrical Safety Permanent magnet synchronization motor Saw frame anti-collision detection LED work light Laser line projection Saw blade breakage detection Saw depth control HMI + keypads Frequency inverter Deviation detector Hydraulic band tensioning Vise differential pressure valves Gkjdpfxjwqchle Afqob Automatic chip conveyor (spiral) Hydraulic blade guide tensioning Vise pressure controller Motorized chip brush Cooling fan for hydraulics Automatic lubrication device Work table with rollers Hydraulic feed Main drive precision gearbox Split vise clamping Movable guide arm hydraulically clamped Chip collecting container 40 (L) Toolbox (wire brush, leveling pads, touch-up paint) One-piece saw blade Optional equipment UL electrical safety 0-start (option for first cut) Top clamp Servo feed Chip collecting container (movable) 70 (L)

Būklė: naujas, Cutting diameter: 570 mm Saw blade length: 7250 x 41 mm Cutting width: 1.3 mm Cutting capacity at 90° (square): 550 x 550 mm Cutting capacity at 90° (flat): 550 x 700 mm Total power requirement: 4 kW Machine weight approx.: 6,050 kg Space requirement approx.: 2,600 x 1,300 x 3,700 mm The KLS 550 x 700 is a semi-automatic, column-guided horizontal bandsaw. Gkodpfxjymf Sds Afqsb Standard Features - Chip brush - Hydraulic blade guide - Hydraulic vice - Hydraulic blade tensioning - Blade breakage switch - Stop system - Automatic ball screw lubrication - LED lighting - Chip conveyor - Chip transport system - 1,400 mm automatic feed - Double roller table - Material end detector - Program memory system - USB output port - PLC control & touchscreen - Frequency inverter Optional Features - Laser line - Oil mist lubrication - V-shaped vice - Additional double roller table - Top clamping system - Sensor for curve cutting detection

Būklė: naujas, Condition: new Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €54,900 Lease rate: €1,037.61 Saw frame: double-column guide Saw blade dimensions: 5400 x 41 x 1.3 mm Infinitely variable blade speed: 20–100 m/min Cutting capacity 0° round: 440 mm Cutting capacity 0° square: 440 mm Cutting capacity 0° flat: 610 x 440 mm Cutting capacity 30° round: 440 mm, square: 440 mm Cutting capacity 45° round: 430 mm, square: 430 mm Cutting capacity 60° round: 320 mm, square: 260 mm Working height: 807.5 mm Hydraulic motor: 1.1 kW Main motor: 4 kW Coolant pump motor: 0.12 kW Length: 2,850 mm Width: 2,350 mm Height: 2,000 mm Weight: 3,600 kg NC control Double-column guidance with linear guides 3° blade angle Swarf brush Operator control panel Hydraulic feed vise Hydraulic vise Hydro-mechanical band tensioning Inverter Optical height adjustment Proximity switch for band slippage detection Pressure adjustment Coolant pump Saw blade Safety switch Operating manual in GERMAN or ENGLISH OPTIONS: Hydraulic bundle clamping device Micro-spraying unit Laser cutting line Roller conveyors and saw blades ALTERNATIVE: Godpfsynnhdjx Afqskb BMSO 440 CGS NC (with servo feed instead of hydraulic feed) €61,900

Būklė: naujas, Condition: new Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €61,900 Lease rate: €1,169.91 Saw frame: double-column guide Saw band dimensions: 6000 x 41 x 1.3 mm Infinitely variable band speed: 20 - 100 m/min Cutting capacity 0° round: 540 mm Cutting capacity 0° square: 540 mm Cutting capacity 0° flat: 670 x 540 mm Cutting capacity 30° round: 540 mm / square: 540 mm Cutting capacity 45° round: 510 mm / square: 510 mm Cutting capacity 60° round: 270 mm / square: 250 mm Working height: 805 mm Hydraulic motor: 2.2 kW Main motor: 4 kW Coolant pump motor: 0.12 kW Length: 3,100 mm Width: 2,350 mm Height: 2,150 mm Weight: 3,800 kg Gksdjynm Rqspfx Afqjb NC control Double-column guide with linear guides 3° cutting angle Chip brush Control panel Hydraulic feed vice Hydraulic vice Hydromechanical blade tension Inverter Optical height adjustment Proximity switch for blade slip detection Pressure adjustment Coolant pump Saw blade Safety switch Operating manual in GERMAN or ENGLISH OPTIONS: Hydraulic bundle clamping device Micro spray unit Laser cutting line Roller conveyors and saw bands ALTERNATIVE: BMSO 540 CGS NC (with servo feed instead of hydraulic feed) €70,200

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 4 mėnesius nuo užsakymo Kilmės šalis: Turkija Kaina: 61 300 € Lizingo įmoka: 1 158,57 € Dviejų kolonų pjūklo rėmas Pjūklo juostos matmenys: 6000 x 41 x 1,3 mm Juostos greitis reguliuojamas be pakopų: 20 - 100 m/min Pjovimo galia 0° apvalus: 560 mm Pjovimo galia 0° kvadratinis: 560 mm Pjovimo galia 0° plokščias: 600 x 560 mm Darbinis aukštis: 810 mm Hidraulinio variklio galia: 2,2 kW Variklis: 5,5 kW Aušinimo siurblio variklis: 0,12 kW Ilgis: 3250 mm Plotis: 2200 mm Aukštis: 2350 mm Svoris: 4500 kg Hidromechaninis juostos įtempimas Nenutrūkstamas juostos greičio reguliavimas (inverteris) Linijinis kreiptuvas Pateikimo spaustuvas su servo pavara, eiga 700 mm arba 9.999 mm su daugiaeige Valdymo pultas su liečiamu ekranu (50 pjovimo ilgių / 30 programų) Planetinis reduktorius Pjovimo slėgio reguliavimas Juostos nuokrypio jutiklis Aušinimo sistema Drožlių šepetys Optinis aukščio reguliavimas PASIRINKTINAI: - Hidraulinis viršutinis spaustuvas - Minimalios dozės tepimas - 3 m ritininis transporteris - Lazerinė pjovimo linija Gksdsynmy Sjpfx Afqsb

Būklė: naujas, Gamybos metai: 2025, Cutting diameter: 650 mm Saw blade length: 8200 x 54 mm Cutting width: 1.6 mm Cutting range at 90° - rectangular: 650 x 850 mm Cutting range at 90° - square: 650 x 650 mm Total power requirement: 5.5 kW / 2775 Nm Machine weight approx. 6,400 kg Space requirement approx. 2700 x 1500 x 4100 mm The KLS 650 x 850 is a semi-automatic, column-guided horizontal band saw. Standard Specifications - Chip brush - Hydraulic blade guide - Hydraulic vice - Hydraulic blade tensioning - Blade breakage switch - Stop system - Automatic ball screw lubrication - LED lighting - Swarf conveyor - Chip transport - 1400 mm feed drive - Double roller table Gksdpfoyk Ikqjx Afqjb - End-of-material detector - Program memory system - USB port output - PLC control & touchscreen - Inverter Optional Specifications - Laser line - Oil mist lubrication - V-shaped vice - Extra double roller table - Upper clamping system - Sensor for curve cutting detection The images are for guidance only and do not represent a true-to-scale depiction of the machine.

Būklė: naudotas, Gamybos metai: 2001, Roller diameter: 680 mm Bandsaw blade length: 8,550 mm Maximum saw blade width: 1.3 mm Cutting height: mm Motor power: 20 kW Table size: 600 x 620 mm Feed rate: m/min Machine height: mm Weight: 10,000 kg MEYER & BURGER (Switzerland) Hydraulic, fully automatic bandsaw for cutting large blocks of hard and brittle materials such as silicon (solar industry), quartz glass, ceramic materials, etc. Model: BS 800 Year of manufacture: approx. 2001 Cutting capacity: - Round material: max approx. 680 mm - Square/rectangular: max. 680 x 680 x 400 mm - Max. workpiece weight: approx. 500 kg Section length min/max: continuous mm Bandsaw blade dimensions (L x Ø): approx. 8,550 x 40–100 mm Blade thickness: approx. 0.5–1.3 mm Gksdst Hw Uiopfx Afqeb 2 drive wheels, diameter x width: 1,200 x 100 mm Wheel center distance: approx. 2,400 mm Cutting speed, stepless: 0–50 m/sec Drive wheel speed (saw band): 300–800 rpm X-axis = programmable workpiece travel: 0.001–800 mm Z-axis = cutting feed/stroke max.: 500 mm Cutting feed/rapid traverse programmable: 0–100/1,000 mm Table diameter: 500 mm Table rotatable up to (angle adjustment 0.001°): max. 90° Saw drive power: approx. 13 kW Total drive power: approx. 20 kW - 380V, 50 Hz Weight: approx. 10,000 kg Accessories / Special features: - The machine enables the cutting of blocks into slabs, or—using the integrated rotary table—into cuboids or prisms. - The bandsaw process with diamond tooling achieves minimal kerf loss, high precision, and superior surface quality. The cutting movement is bottom-up, with material feed from front to back. - Controlled via SIEMENS PLC Simatic S7 and visualization on OP 27; infinitely variable drives and positioning on all axes. - Automatic saw blade tensioning and band tracking adjustment - Built-in rotary table with magnetic plate approx. 600 x 620 mm, tiltable - Full stainless steel enclosure with surround, separate control cabinet, standalone hydraulic and coolant systems Condition: Good to very good – demo-ready shortly – very rare machine Delivery: Ex stock, as inspected Payment: Net, upon receipt of invoice

Būklė: naujas, Būklė: nauja Pristatymo laikas apie 4-6 mėnesiai nuo užsakymo Kilmės šalis: Turkija Kaina: 30 900 € Lizingo įmoka: 590,19 € Pjūklo rėmas su dvigubų kolonų kreiptuvais Pjūklo juostos matmenys: 6000x41x1,3 mm Juostos greitis: be pakopų reguliuojamas 20-100 m/min Pjovimo našumas 0° apskritas: 560 mm Pjovimo našumas 0° kvadratinis: 560 mm Pjovimo našumas 0° plokščias: 570x560 mm Darbo aukštis: 590 mm Hidraulinis variklis: 1,1 kW Pagrindinis variklis: 4 kW Aušinimo skysčio siurblio variklis: 0,12 kW Ilgis: 500 mm Plotis: 1050 mm Aukštis: 2050 mm Svoris: 2242 kg NC valdymas Dvigubų kolonų kreiptuvai 3° pjovimo kampas Drožlių šepetys Valdymo pultas Hidraulinė padavimo spaustuvė Hidraulinė spaustuvė Hidromechaninis juostos įtempimas Inverteris Linijinis kreiptuvas Optinis aukščio nustatymas Proximity jutiklis juostos slydimui aptikti Slėgio reguliavimas Gsdpfxeynm Rwo Afqskb Aušinimo skysčio siurblys Pjūklo juosta Saugos jungiklis Eksploatacijos instrukcija vokiečių arba anglų kalba

Būklė: naudotas, Gamybos metai: 1985, Pjovimo skersmuo 1300 mm Juostos pjūklo juostos ilgis 11880 mm Pjovimo plotis 1,6 mm Pagrindinis variklis 11 kW Stalo plotas 2300x1200 mm Pjovimo zona 1300x1300 mm Bendras energijos poreikis 16 KVA Mašinos svoris apie 17,75 t Pilnai automatinis juostinis pjūklas Pjūklas 52 Techniniai duomenys pateikti pagal gamintojo arba naudotojo informaciją, todėl mes neprisiimame atsakomybės už jų tikslumą. Pasiliekame teisę parduoti įrangą kitam pirkėjui be išankstinio įspėjimo; galioja tik mūsų bendrosios prekybos ir pardavimo sąlygos. Apie mus Daugiau kaip 400 nuosavų mašinų sandėlyje daugiau nei 15.000 m² sandėliavimo plotas, krano keliamoji galia 70 t daugiau nei 10.000 priedų jūsų dirbtuvėms Jei norite parduoti mašinas, gamybos linijas ar visą įmonę, Godpfxjzfqhtj Afqskb susisiekite su mumis. Daugiau pasiūlymų rasite mūsų svetainėje. Apsilankymas galimas iš anksto susitarus. Laukiame jūsų apsilankymo. Jūsų Markus Hirsch komanda

Būklė: naudotas, Gamybos metai: 1985, Pjovimo skersmuo 1300 mm Juostos pjūklo juostos ilgis 11880 mm Pjovimo plotis 1,6 mm Pagrindinio variklio galia 11 kW Stalo paviršius 2500x1300 mm Pjovimo sritis 1300x1300 mm Bendras energijos poreikis 16 KVA Mašinos svoris apie 17,75 t Pilnai automatinis juostinis pjūklas Pjūklas 54 Techniniai duomenys pateikiami gamintojo arba savininko ir nėra mums įpareigojantys. Tarpinio pardavimo teisę pasiliekame; galioja tik mūsų verslo ir prekybos sąlygos. Apie mus Daugiau nei 400 nuosavų mašinų sandėlyje Daugiau nei 15 000 m² sandėliavimo plotas, krano talpa 70 t Daugiau nei 10 000 prekių priedų Jūsų dirbtuvėms Jei norite parduoti mašinas, gamybos linijas ar savo įmonę, prašome susisiekti su mumis. Daugiau pasiūlymų rasite mūsų svetainėje. Apžiūra galima pagal susitarimą. Gksdpfx Aozfqg Nefqob Laukiame Jūsų apsilankymo. Jūsų Markus Hirsch komanda

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Istech 431 NC bandsaw, year 2007. Round cutting capacity: 430 mm; square cutting capacity: 430x430 mm. Cutting stroke: 500 mm. Blade motor power: 5.5 kW. Dimensions: 240x260x260(h) cm. Weight: 3,500 kg. Gjdpfx Aswvqpuofqokb

Gamybos metai: 1989, būklė: geras (naudotas), Kasto fully automatic bandsaw, model HB 420 AU. Round cutting capacity: 420 mm Square cutting capacity: 420 x 420 mm Maximum vise opening: 480 mm Saw blade: 6300 x 41 x 1.3 mm Variable speed: 20–130 rpm Chip conveyor Motor power: 8 kW Godjh Huazspfx Afqskb Weight: 3,360 kg Machine is in very good working condition.

Būklė: geras (naudotas), Gamybos metai: 2002, mašinos/transporto priemonės numeris: 122668, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 460 mm, pjovimo plotis (maks.): 600 mm, juostinio pjūklo ilgas: 7 470 mm, pjūklo juostos plotis: 54 mm, dalies ilgis (maks.): 760 mm, skyriaus ilgis (min.): 8 mm, TECHNINĖS DETALĖS Pjūklas Matmenys: 7.470 x 54 x 1,3 mm Pjovimo greitis: be laipsnių reguliuojamas (apie 1:7) Darbo sritis Medžiagos skersmuo – apvalios medžiagos: maks. Ø 460 mm Medžiagos matmenys – kvadratinės medžiagos (plotis x aukštis): maks. 600 x 460 mm Pjūvio ilgis – viengubas ėjimas: min. 8 mm, maks. 760 mm Pjūvio ilgis – daugybinis ėjimas: min. 8 mm, maks. 9.999,9 mm Minimalus ruošinio ilgis automatinėje veikoje: 90 mm Gkjdpjzmdrnsfx Afqob Darbo aukštis Darbo aukštis: 720 mm MAŠINOS DETALĖS Matmenys ir svoris Matmenys (I/P/A): 2.320 x 3.660 x 2.570 mm Plotis su drožlių transporteriu (pasirinktinai): 4.650 mm Svoris: apie 6.000 kg Elektros duomenys Pagrindinis variklis: 7,5 arba 9,2 kW Hidraulinis variklis: 2,2 kW Pjovimo variklis: 0,18 kW Aušinimo skysčio siurblys: 0,19 kW Drožlių transporteris (pasirinktinai): 0,18 kW Ritinėlių takelio pavara (pasirinktinai): 0,8 kW NC padėties pavaros (pasirinktinai): 0,37 kW

Būklė: naujas, Gamybos metai: 2026, Cutting range round: 420 mm Cutting range square (W x H): 420 x 420 mm Smallest cuttable size: 10 x 10 mm Clamping range: 0 - 420 mm Bundle cutting range (min. W x H - max. W x H): 160 x 130 - 260 x 160 mm Shortest cut-off piece length: 5 mm Shortest remnant length in automatic mode*: 190 mm Shortest remnant length in single cut: 20 mm Length: 2220 mm Width incl. chip conveyor: 3030 mm Height: 2250 mm Machine weight approx.: 3000 kg Total connected load: 11.5 kW Saw motor power: 7.5 kW Hydraulic motor power: 1.5 kW Continuously adjustable cutting speed: 20 - 80 m/min Saw feed rate: 1 - 300 mm/min Automatic material feed length, single stroke: 500 mm Automatic material feed length, multiple strokes: 9999 mm Saw blade dimensions: 5150 x 41 x 1.3 mm Standard equipment Fully enclosed safety guard according to CE standards JLH-EHA Saw Master CE Electrical safety Permanent magnet synchronous motor Saw frame anti-collision detection LED work light Laser line projection Saw blade breakage detection Cutting depth control HMI + buttons Frequency inverter Deviation detector Hydraulic blade tensioning Vice differential pressure valves Automatic chip conveyor (spiral) Hydraulic blade guide tensioning Vice pressure regulator Motorized chip brush Cooling fan for hydraulics Automatic lubrication device Worktable with rollers Hydraulic feed Main drive precision gearbox Split vice clamping Movable guide arm hydraulically clamped Gkjdpfx Afswaa A Sjqob Chip collection container 40 L Toolbox (wire brush, leveling pads, touch-up paint) One-piece saw band Optional equipment UL electrical safety 0-start (first-cut option) Top clamp Servo feed Chip collection container (movable) 70 L

Būklė: naudotas, Gamybos metai: 2003, Pjovimo skersmuo 500 mm Juostinio pjūklo ilgis 6990x41x1,3 mm Pjovimo plotis 860x500 mm Pjovimo greitis 15–90 m/min Padavimas 400 mm/min Greitas važiavimas 2500 mm/min Pagrindinio variklio galia 5,5 kW Minimalus ruošinio ilgis 8 mm Bendra galia 8,5 kW Staklių svoris apie 3,6 t Užimamas plotas apie 3,3x1,2x2,42 m Vieno ciklo eiga 3000 mm Galimas daugkartinis ciklas Pasirinktinai: Pristatymo volelių takas apie 8 m Išvežimo volelių takai apie 10 m Gkjdpfeyutwqox Afqjb Techniniai duomenys yra gamintojo arba naudotojo pateikti, todėl už juos neatsakome. Tarpinis pardavimas galimas; galioja tik mūsų verslo ir pardavimo sąlygos. Apie mus Daugiau nei 400 nuosavų staklių sandėlyje Daugiau nei 15 000 m² sandėliavimo ploto, krano keliamoji galia 70 t Daugiau nei 10 000 įrangos prekių jūsų dirbtuvėms Jei norite parduoti stakles, gamybos linijas ar savo verslą, susisiekite su mumis. Daugiau pasiūlymų rasite mūsų tinklalapyje. Apžiūra galima iš anksto susitarus. Laukiame jūsų apsilankymo. Jūsų Markus Hirsch komanda

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, bendras svoris: 2 920 kg, valdiklio modelis: Siemens Simatic HMI, pjovimo skersmuo: 320 mm, pjovimo greitis: 130 000 mm/min, juostinio pjūklo ilgas: 6 300 mm, Mašina buvo peržiūrėta Kasto 2016 metais! TECHNINĖS DETALĖS Pjovimo skersmuo: 320 mm Juostos ilgis: 6 300 mm Gsdpfx Asywhdfjfqekb Pjovimo diapazonas: 420 x 320 mm Pjovimo greitis: 20–130 m/min Medžiagos padėjimo aukštis: 950 mm MAŠINOS DETALĖS Valdymas: Siemens Simatic HMI Bendra galia: 15 kW Matmenys ir svoris Užimamas plotas: apie 6,35 x 6,76 x 2,41 m Mašinos svoris: apie 2 920 kg Pneumatinė jungtis: 6 bar Aušinimo skystis: 75 l Siurblio našumas: 40 l/min ĮRANGA Pjovimo padavimo greitis reguliuojamas be pakopų Ritininis transporteris Drožlių transporterio sistema Techninė dokumentacija Mašina parduodama be roboto ir pakrovimo sistemos. Klientas turi savarankiškai perprogramuoti mašiną veikti atskirai (stand alone).

Būklė: naujas, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Saw band dimensions: 5450 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight approx. 3.2 t Dimensions (L x W x H): 2,675 x 2.15 x 2.05 m SPECIAL OFFER PRICE!!!! 2-column high-performance bandsaw machines from the SBS series The SBS series stands out through advanced technology, premium quality, durability, and an unparalleled comprehensive standard configuration. • Modern SNC 20 control system in CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light included • Powered chip brush Gedefg E Hvspfx Afqokb • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the saw blade) • Inch mode for positioning • Electrical and hydraulic bundle clamping provision • Chip conveyor The SNC 20 control system allows easy and straightforward input of up to 20 different sawing tasks (length and quantity). When the desired length is entered, the control system automatically calculates cutting allowance and the number of feed cycles. The error code display system also allows for quick fault analysis and troubleshooting.

Būklė: naujas, Gamybos metai: 2025, Cutting range round: 560 mm Cutting range square (W x H): 560 x 560 mm Minimum workpiece size: 100 x 100 mm Clamping range: 100 - 560 mm Bundle cutting range (Min. W x H - Max. W x H): - mm Shortest cut-off length: 50 mm Shortest remnant length in automatic mode*: 170 mm Shortest remnant length in single cut: 40 mm Length: 2300 mm Width incl. chip conveyor: 5200 mm Height: 600 mm Machine weight approx.: 11,000 kg Total connected load: 26 kW Saw motor power: 15 kW Hydraulic motor power: 3.75 kW Continuously adjustable cutting speed: 20 - 80 m / min Saw feed rate: 1 - 300 mm / min Automatic material feed length, single stroke: 500 mm Automatic material feed length, multiple stroke: 9999 mm Saw blade dimensions: 8400 x 67 x 1.6 mm Godpfxsxu Ay Hj Afqjkb Standard equipment: Fully enclosed guarding according to CE standard JLH-EHA Saw Master CE electrical safety Saw bow anti-collision detection LED work light Laser line projection Saw blade breakage detection Saw depth control HMI + push buttons Frequency inverter Deviation detector Hydraulic band tensioning Vise differential pressure valves Automatic chip conveyor (spiral) Hydraulic band guide tensioning Vise pressure regulator Motorized chip brush Hydraulic cooling fan Automatic lubrication device Roller work table Hydraulic feed Movable guide arm with hydraulic clamping Chip collection container 40(L) Toolbox (wire brush, leveling pads, touch-up paint) One-piece saw blade Optional equipment: 0-start (option for first cut) Chip collection container (movable) 70 (L)

Būklė: naujas, Gamybos metai: 2025, Cutting range round: 660 mm Cutting range square (W x H): 700 x 660 mm Smallest size to be cut: 30 x 30 mm Clamping range: 20 - 700 mm Bundle cutting range (Min. W x H - Max. W x H): 30 x 30 - 700 x 660 mm Shortest length of cut-off piece: 20 mm Shortest remnant length in automatic operation*: 400 mm Shortest remnant length in single cut: 20 mm Length: 3,150 mm Width incl. chip conveyor: 4,300 mm Height: 3,080 mm Height of material support: 895 mm Machine weight approx.: 6,400 kg Total connected load: 17.8 kW Saw motor output: 11 kW Hydraulic motor output: 2.2 kW Sawing speed, infinitely variable: 20 - 90 m/min Feed rate of saw: 1 - 300 mm/min Automatic material feed length, single stroke: 1,000 mm Automatic material feed length, multiple stroke: 9,999 mm Saw blade dimensions: 8,100 x 64 x 1.6 mm Standard equipment CE safety guard JLH-EHA band saw master CE electrical safety Permanent magnet synchronous motor Saw frame collision detection LED work lamp Saw blade break detection Cutting depth control HMI + control buttons Frequency inverter Deviation detector Hydraulic saw blade tensioning Godpfx Afoxrutysqjkb Automatic chip conveyor (spiral) Hydraulic saw blade guide clamping Vice pressure regulator Motorized chip brush Upper clamping device Hydraulic fan Automatic lubrication system Roller table Hydraulically driven Precision gearbox for main drive Split vice clamping Hydraulically movable guide arm Chip collection container (mobile) 70 (L) Optional equipment UL electrical safety Laser line projection Saw band breakage detection Cutting depth control Deviation detector Hydraulic blade guide tensioning Upper clamp Servo feed Movable guide arm, hydraulically clamped Chip collection container (mobile) 70 (L)

Būklė: geras (naudotas), Gamybos metai: 2001, galia: 12 kW (16,32 AG), bendras aukštis: 3 270 mm, bendras ilgis: 4 000 mm, bendras plotis: 2 250 mm, bendras svoris: 4 400 kg, Manufacturer: BEHRINGER Gjdpfx Afou U Narsqskb Model: HBP 530 A Year of manufacture: 2001 Specifications Metric US Standard Capacity 90° 530 x 530 mm Min. cutting length 40 mm Max. cutting length 17 - 110 mm Power 12 kW Chip conveyor Yes Dimensions (approx.): Length 4000 mm Width 2250 mm Height 3270 mm Weight 4400 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith; however, accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all critical details.