Nardymas Pamačiau pirkti naudotą (28)

Sąlyga: nepatikrintas (naudotas), I am selling the Stankoimport TCPA-6 saw blade and band saw sharpening machine, made in Russia. Ndsdpfx Aed Hx R Dec Aod

Gamybos metai: 2018, Sąlyga: beveik kaip naujas (parodų įrenginys), Mitre saw with a saw blade diameter of 600mm (optionally 800mm) - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and angle of the clamping cylinders infinitely adjustable) - Two-hand safety control Optional available: - Automatic mitre adjustment - Roller conveyor with length stop or positioning system - Version as automatic saw Ndedpfx Acod Rhzwj Asd - Loading magazine - Horizontal clamping device - Extraction system - Further accessories on request We would be pleased to provide you with an offer tailored to your requirements. The machine can be inspected and tested at 56812.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, format saw with side carriage, in good working condition Nedpjfv Hphsfx Ac Ajdd

Gamybos metai: 1979, Sąlyga: paruoštas naudoti (naudotas), Galima Hakumag kėlimo, dildymo ir pjovimo staklė. Stalo matmenys X/Y/Z: apie 290mm/290mm, eiga: 10mm–80mm, iškyša: 155mm, stalo pasukimas: +/-15°, svoris: apie 120kg. Galima apžiūra vietoje. Ndsdpfoxmkcgox Ac Ajd

Sąlyga: labai geros būklės (naudotas), Cross-cut saw Haffner KL-176 Nodpfx Ajfk I U Rsc Ajdd

Sąlyga: naujas, Cutting capacity at 90 degrees: round 310 mm Cutting capacity at 90 degrees: square 280 mm Cutting capacity at 90 degrees: rectangular 400x250 mm Njdpfxed Iipro Ac Ajdd Saw blade dimensions: 4020 x 34 x 1.1 mm Blade speed: 18 - 100 m/min Table height: 890 mm Total power requirement: 2.2 kW Machine weight approx. 0.99 t Space requirement approx. 1.85 x 2.2 x 2.0 m Mitre Band Saw, Fully Automatic, GBS 310/400 VA-I CNC - Mitre left 45° automatic operation - Mitre left 60° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gearbox made from one casting, very quiet and low-vibration cutting - Removable chip tray (for cleaning) - Shockproof and ergonomic control panel with oil-resistant EPDM cover - Excellent accessibility to saw, material and feed unit - Safety cover foldable - Fine feed adjustment - Semi-automatic cutting! - CNC control for optimizing workflows Input options for different parameters such as quantity and material lengths, automatic calculation of cutting kerf - CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g., one cutting program with multiple section lengths - Automatic feed unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, remnant piece length 170 mm.

Sąlyga: naujas, Various bimetal bandsaw blades, HSS, in the following dimensions: 1735 x 13 x 0.9 mm 1630 x 13 x 0.9 mm 1440 x 13 x 0.65 mm Njdpfx Acsc R Tyfj Aedd 1138 x 13 x 0.65 mm 2375 x 20 x 0.9 mm 2465 x 20 x 0.9 mm 2085 x 20 x 0.9 mm 2130 x 20 x 0.9 mm 2140 x 20 x 0.9 mm 1900 x 20 x 0.9 mm 2000 x 20 x 0.9 mm 2750 x 27 x 0.9 mm 2835 x 27 x 0.9 mm 2850 x 27 x 0.9 mm 2950 x 27 x 0.9 mm 3150 x 27 x 0.9 mm 3320 x 27 x 0.9 mm 2950 x 27 x 0.9 mm 2910 x 27 x 0.9 mm 2450 x 27 x 0.9 mm 4530 x 27 x 0.9 mm 4500 x 27 x 0.9 mm 4400 x 34 x 1.5 mm 4640 x 34 x 1.1 mm

Sąlyga: naujas, Automatic Saw / Crosscut Saw MTI AS-350-SA - Saw blade diameter 350 mm (other sizes and models available on request) - Infinitely adjustable positioning length up to 300 mm (other lengths available on request) - Cutting range (height x width) depending on configuration - Optional with roller conveyor, smooth conveyor, etc. - Additional accessories available on request We would be pleased to provide you with a quotation tailored to your requirements. Nsdpfx Acsd Rhzqo Aedd

Gamybos metai: 1998, Sąlyga: labai geros būklės (naudotas), Kap Saw Reinchardt NC 700 Automatic Manufacturer: Reinchardt Model / Type: NC 700 Nedpfx Ajd H Hmhoc Aedd Year of Manufacture: 1998 Category: Crosscut Saw Location: Gorzów Wlkp. Delivery Terms: Collection by Buyer Delivery Costs: Covered by the Customer Commissioning: To be agreed Description: CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1 MM, NEW CONTROLLER, SAW BLADE OPERATED BY HYDRAULICS Comments:

Sąlyga: geras (naudotas), Rope guide snorkel for rope pulley, steel wire rope pulley, rope deflection pulley, crane rope, four-rope clamshell grab, polyp grab, mechanical multi-shell grab, clamshell grab, ship unloading grab, scrap grab, waste grab, rope grab, digging grab -Rope guide snorkel: Type inner Ø 50 mm for MKrane Ref.: 1031 4129 -Quantity: 3x rope guide snorkels available -Price: per piece Ndedpfsv Iklnox Ac Aod -Dimensions: 200/200/H375 mm -Weight: 19.6 kg/pc.

Sąlyga: naudotas, Used machine Used scroll saw from Budget, model BDS 1101 Nedjv Ntadjpfx Ac Ajdd Motor power: 70 watts Motor speed: 1,440 rpm Availability: short-term Location: Solingen

Sąlyga: naujas, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting diameter flat: 300 x 260 mm Saw band length: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL PROMOTION PRICE!!!! 2-Column Heavy-Duty Bandsaw Machines of the SBS Series The SBS series stands out with advanced engineering, high quality, durability, and an unrivaled comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms Ndodpfx Ajfb Nbfoc Ajd • Work light • Driven chip brush • Hydraulic band tensioning • Adjustable clamping pressure • Double vise (before and after the blade) • Creep speed for positioning • Bundle clamping prepared for electric and hydraulic systems • Chip conveyor The SNC 20 control allows easy and straightforward input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control system automatically calculates the material allowance and the number of feed cycles. In addition, the error code display system enables fast analysis for troubleshooting.

Sąlyga: naujas, Gamybos metai: 2024, Mitre saw with a saw blade diameter of 600 mm (optionally 800 mm) - Manual mitre angle adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and tilt angle of the clamping cylinders continuously adjustable) - Two-hand safety control Optional available: Nodpfsd Rhziox Ac Ajdd - Automatic mitre angle adjustment - Roller conveyor with length stop or positioning system - Version as an automatic saw - Pre-load magazine - Horizontal clamping device - Extraction unit - Further accessories on request We would be pleased to provide you with an offer tailored to your requirements. The machine can be viewed and tested at 56812.

Gamybos metai: 2006, Sąlyga: labai geros būklės (naudotas), Sierra Ingleteadora con taladrado BALESTRIERI TECHNA PLUS 3001 Fabricante: BALESTRIERI Modelo / tipo de máquina: TECHNA PLUS 3001 Año de fabricación: 2006 Categoría de máquina: Sierra/Incaizadora Cabezal de corte móvil con accionamiento de posicionamiento a través de unidades de movimiento y visualización digital electrónica. Los deslizadores constan de guías templadas y cremalleras de bolas recirculantes. • 2 unidades con disco de Ø 400 mm – cada unidad accionada por motor de 3 kW • Capacidad (sistema radial) de la unidad deslizante de rodillos • 2 mesas de apoyo de componentes, equipadas con pinzas neumáticas verticales • 1 soporte de mesa indirecto • Lectura mediante visualizador digital electrónico • 2 unidades de taladrado desde el cabezal, cada una con 5 husillos de 32 mm – motores de 1,5 kW (5500 rpm); deslizaderas para la unidad deslizante de rodillos • Lector mecánico para correcciones verticales y horizontales; cabezales de taladrado orientables horizontal o verticalmente • Inicio de ciclo mediante pulsadores a dos manos (según normativa de seguridad) y controles a pedal neumático • Evacuación automática de residuos • Altura máxima de corte: 145 mm • Ancho máximo de corte: 300 mm • Longitud mínima de corte: 170 mm (con carga/descarga automática: 355 mm) • Longitud máxima de corte: 3100 mm • Ancho de corte: 300,0 mm • Altura de corte: 145,0 mm • Potencia del motor: 1,5 kW ----- Dimensiones (Largo x Ancho x Alto): - × - × - Peso: 2.300 kg Horas de funcionamiento: - Horas conectada a la red eléctrica: - Buen estado técnico Conforme a normativas CE ----- • Peso: 2.300 kg Ndjdpfx Ajd Ifgvoc Asd

Sąlyga: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangle 1250 x 600 mm Nsdpfofg E Hnox Ac Ajdd Cutting capacity at 45 degrees: round 680 mm Cutting capacity at 45 degrees: square 600 mm Cutting capacity at 45 degrees: flat 870 x 600 mm Cutting capacity at 60 degrees: round 580/550 mm Cutting capacity at 60 degrees: square 530/450 mm Cutting capacity at 60 degrees: flat 550 x 450 mm Saw blade length: 8140 x 54 x 1.6 mm Blade speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight approx. 5.3 t Required floor space approx. 5.75 x 4.2 x 2.75 m 2-column double mitre band saw for fast cutting equipped with pusher system P15; option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to -60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Highest positioning accuracy is achieved with the new B&S Positioning System. An intelligent NC control ensures smooth interplay of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake via large-diameter central positioning. The work table is mounted on high-quality preloaded bearings, which ensure smooth and easy rotation. CNC control A CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities and mitre angles. Dual-side gripping positioning system The B&S pusher system, feeding and positioning system, is equipped with ‘dual-side opening gripper tongs’ which are hydraulically controlled. This guarantees secure gripping and transportation of materials and bundles that deviate slightly from the ideal form. The pusher system is set up separately and is guided by ball-bearing linear guides, a precision-ground rack, and a frequency-controlled, robust geared motor.

Sąlyga: visiškai atnaujintas (naudotas), Long-cut wedge saw Mitre adjustment via stop arm and locating holes Machine equipped with two-hand safety control Saw blades up to 800 mm diameter Extraction ports at relevant locations Horizontal and vertical workpiece clamps Ndjdsd Szf Ropfx Ac Asd Saw blades, extraction units, and roller conveyors/length stops available on request.

Sąlyga: naujas, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 1250x600 mm Saw blade length 8140x54x1.6 mm Band speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 4.96 t Nedefgyigjpfx Ac Ajdd Space requirement approx. 5.7 x 4.0 x 2.75 m 2-Column Bandsaw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid materials. Material is clamped vertically on the infeed and outfeed sides. Starting from the K-tech 800 H, the machine is equipped as standard with an additional horizontal vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines are standard equipped with the environmentally friendly “B&S Clean Cut cutting system” featuring minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC control The CNC control allows programming of up to 90 cutting programs with different cut lengths, batch quantities, and mitre angles. The B&S pusher system, feed and positioning system, is equipped with "double-sided opening gripper tongs" that are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is designed as a separate unit and is guided via ball-bearing linear guides, a precision-ground rack, and a frequency-driven robust gear motor.

Sąlyga: naujas, Cutting range at 90°: round 255 mm Cutting range at 90°: square 240 mm Cutting range at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 – 110 m/min Total connected load: 1.5/1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre Band Saw, Fully Automatic GBS 250 Super VA-I MPS • Mitre left 45°: automatic mode Nodpfx Aed Iip Aec Ajdd • Mitre left 60°: semi-automatic mode (cuts without programming) • Impact-resistant and ergonomic control panel with oil-resistant EPDM cover • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting, very quiet and low vibration cutting • Removable chip tray (disinfection) • Excellent access to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cut! Automatic sawing with microprocessor control Selectable for 2 program levels Semi-automatic mode Fully automatic mode Start after entering the required number of pieces and length: initial material cut, cutting process, and piece counting continues until the program is completed • MPS controller for entering the required number of feed cycles • All important machine data (power consumption, cutting time, number of pieces) is displayed on the LED display during the cutting process • Entered data is stored in the RAM memory • The self-diagnostic circuit automatically displays all irregularities as error messages and monitors the complete process • Feed unit mounted on floating bearings • Length adjustment via handwheel and vernier with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm, or repeatable via reversing automatic 1 – 29 times, remainder piece length 210 mm

Sąlyga: naujas, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400 x 330 mm Saw band length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx. 2.35 t Njdpfjfb Nbgsx Ac Ajdd Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL PRICE!!!! 2-Column High-Performance Bandsaw Machines of the SBS Series The SBS series impresses with sophisticated technology, high quality, durability, and an unrivaled comprehensive standard equipment package. - Modern SNC 20 controller for CNC versions - Frequency-controlled saw drive - Operating buttons with pictograms - Work light - Driven chip brush - Hydraulic band tension - Adjustable clamping pressure - Double vice (before and after the band) - Creep mode for positioning - Bundle clamping prepared for electric and hydraulic operation - Chip conveyor The SNC 20 controller allows convenient and straightforward input of up to 20 different cutting tasks (length and quantity). When the target dimension is entered, the controller automatically calculates the kerf waste and the number of feed strokes required. In addition, the error code display system offers rapid fault diagnosis for troubleshooting.

Sąlyga: naujas, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 820 x 610 mm Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Cutting capacity at 60°: square 370 mm Cutting capacity at 60°: flat 370 x 600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 – 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double mitre band saw for rapid cutting with pusher system P15. Option P30 available. Hydraulic saw frame lowering • NC controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially engineered for cutting profiles and beams. Maximum positioning accuracy is achieved by the new “B&S positioning system”. An intelligent NC control unit ensures smooth interaction between the linear encoder and the self-braking positioning motor, combined with a reliable hydraulic brake via large-radial central positioning. The work table is mounted on high-quality preloaded bearings, ensuring exceptionally smooth rotation. CNC control The CNC controller enables programming of up to 90 cutting programs with varying cut lengths, quantities, and mitres. Double-sided clamping positioning system The B&S pusher system, feeding and positioning unit, is equipped with "double-sided opening gripping tongs" that are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate from the ideal shape. The pusher system is constructed separately and guided by precision ball-bearing linear guides, ground rack and pinion, and a heavy-duty, frequency-driven gear motor. Ndsdpfx Aefg E Hmsc Aod

Sąlyga: naujas, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Bandsaw blade length: 5,450 x 41 x 1.3 mm Table height: 800 mm Blade speed: 20 - 100 m/min Total power requirement: 5.5 kW Ndsdpfx Acofg E Hve Aed Machine weight: approx. 3.2 t Dimensions (L x W x H): 2,675 x 2,150 x 2,050 mm SPECIAL PRICE OFFER!!!! 2-column high-performance automatic bandsaws of the SBS series The SBS series stands out with its advanced technology, high quality, durability, and an exceptionally comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tension • Clamping pressure regulation • Double vice (before and after the blade) • Inch mode for positioning • Bundle clamping prepared for electric and hydraulic control • Swarf conveyor The SNC 20 controller allows easy and straightforward input of up to 20 different sawing jobs (length and quantity). When the desired dimension is entered, the control system automatically calculates both kerf loss and the required number of feed cycles. In addition, the error code display system provides rapid fault diagnosis for troubleshooting.

Sąlyga: naujas, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw band dimensions: 5980 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.8 t Dimensions (L x W x H): 3.0 x 2.15 x 2.2 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Machines of the SBS Series The SBS series stands out with its advanced technology, high quality, durability, and a uniquely extensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Adjustable clamping pressure • Double vice (before and after the saw band) Ndodpfsfg E Hwex Ac Aed • Creep mode for positioning • Bundle clamping electrically and hydraulically prepared • Chip conveyor The SNC 20 control allows simple and user-friendly input of up to 20 different sawing operations (length and quantity). When entering the target dimension, the control system automatically calculates the trim cut and number of feed strokes. Additionally, the error code display system enables quick diagnosis for troubleshooting.

Sąlyga: naujas, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical band saw in dual-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Njdpfxofm T Hbo Ac Aodd Standard equipment includes: - Powered chip conveyor, mountable on either the right or left side of the machine. - Clamping pressure regulation of the machine vices. - Feeder with vertical rollers for lateral material support. - Sensors for material start detection. - Clamping pressure regulation. - Storage for up to 300 programs. - The machine is available with either a 34 mm or 41 mm blade at no extra cost. Price on request.

Sąlyga: naujas, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangle 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Nsdpfxjfu Nbbe Ac Aedd Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight: approx. 2.3 t Space requirements: approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic operation Material height sensor (automatic cut-start detection) Automatic feed unit via ball screw with incremental feed and automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush Feed vice with double-sided opening Minimum offcut length: 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cutting lengths and quantities Automatic feed unit 500 mm via ball screw with incremental feed and automatic length compensation, adjustable for cut lengths from 25 to 9,999 mm Fully hydraulic control of saw frame and clamping units Pre-selection of 3 different material feed speeds Visualization of the entire workflow with easy data input

Sąlyga: naujas, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 820 x 610 mm Saw blade length: 5850 x 41 x 1.3 mm Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirements: approx. 5.85 x 3.6 x 2.7 m 2-column band saw for high-speed cutting, K-tech 800H with pusher system P 15. P 30 (option). Fast, smooth and ergonomic cutting. Specially developed for cutting profiles and beams as well as solid material. Material clamping is done vertically on both the infeed and outfeed sides. Starting from the K-tech 800 H, the machine is equipped as standard with an additional horizontal clamping vice. The combined action of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines come standard with the environmentally friendly B&S Clean Cut cutting system featuring minimal quantity lubrication. This reduces cleaning requirements and conserves resources. Njdpfofgyifjx Ac Aodd CNC Control A CNC control unit allows programming of up to 90 cutting programs with different cut lengths, quantities, and angles. The B&S pusher system (feed and positioning system) is equipped with "double-opening hydraulic grippers," which are hydraulically operated. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal shape. The pusher system is built as a separate unit and guided by ball-bearing linear rails, precision-ground rack, and a frequency-driven, robust gear motor.