Horizontali juostinė pjūklas – visiškai automatinė – pjovimo sritis apvali 300–359 mm pirkti naudotą (79)

Sąlyga: geras (naudotas), Gamybos metai: 1992, mašinos/transporto priemonės numeris: 5164, Offer 23148 Hfodpfsq Evn Eex Abmsr Technical Data: - With hydraulic clamping and feed device - Cutting range round: 320 mm - square: 300 x 300 mm - Max. cutting length per single stroke: up to 400 mm - Multiple feed up to: 10 x 400 mm - Saw blade dimensions: 3660 x 25 x 0.9 mm - Cutting speed steplessly adjustable: 20 - 100 rpm - Feed rate hydraulically steplessly adjustable - Coolant system - Material support height: 720 mm - Saw blade drive: - Motor: 400 V / 2.5 kW - Space requirements approx.: W 1950 x H 1250 x D 1500 mm - Weight approx.: 1000 kg

Sąlyga: naujas, Gamybos metai: 2022, You have a Behringer saw and your control panel is defective, the membrane keypad is damaged, but the machine itself is still too good to replace. The BT 41 is a very widely used control panel and we can repair it for you! Contact us for more information. Hodpfotv Ip Ijx Abmofr

Sąlyga: naudotas, Gamybos metai: 1990, Cutting diameter: 340 mm Saw band length: 5334 mm Cutting width: 340 x 340 mm Saw band dimensions: 5334 x 38 x 1.3 mm Minimum cut-off length: 6 mm Multiple feed length: 5400 mm Cutting speed: 2 m/min Drive power: 5.5 kW Operating voltage: 380 V Total power requirement: 8.0 kW Machine weight: approx. 2.5 t Hsdet Tqlbepfx Abmsfr Space requirement: approx. 2.85 x 2.30 x 2.10 m Horizontal band saw automatic machine.

Sąlyga: naujas, Cutting diameter 350 mm Saw band length 4640 x 34 x 1.1 mm Cutting width 350 mm Control NC 5.0 Band speed 15 - 100 m/min Cutting range at 0 degrees: round 350 mm Cutting range at 0 degrees: square 350 x 350 mm Table height 860 mm Total power requirement 4 kW Machine weight approx. 2.8 t Shark 350 NC 5.0, automatic hydraulic bandsaw in twin-column design for 0° cuts up to max. 350x350 mm. Standard equipment includes: - Powered chip conveyor, installable on either side of the machine. - Vise clamping pressure adjustment. - Material feeder with vertical rollers for lateral support. - Numerically controlled bandsaw, also operable in semi-automatic mode, featuring the new MEP 50 control specially developed by MEP for automatic machines, based on Windows "CE". - "Clean cut" cycle: the feeder pushes the workpiece backwards after the cut to prevent scoring on the cut surface when the band returns to the top at the end of the cut. - Fieldbus communication system with dual microprocessor and serial connection. - User interface with 7” touch-screen display and mechanical push-buttons, used for machine operation, ensuring reliable, simple, and intuitive use, as well as real-time monitoring of all cutting parameters. Standard features - Shark 350 NC/CNC HS comes standard with chip conveyor. Hfedpowu Hhdofx Abmsr - Bi-metal saw band, tool kit - Mounting adapter for roller conveyor - Material chute for removal of short offcuts - Forklift/pallet truck entry points Machine is available ex-stock, subject to prior sale.

Sąlyga: naujas, Gamybos metai: 2025, Cutting diameter: 1850 mm Saw band dimensions: 54 x 10,566 mm Control: NC Electrical connection: 460V 60Hz Hjdpfx Ast Nziijbmsfr Cutting range at 90 degrees (round): 1854 mm Cutting range at 45 degrees (round): 1854 mm Cutting range at 30 degrees (round): 1854 mm Machine weight approx. 9,000 kg Space requirement approx. 2.2 x 5 x 4 m The KLY 1850 is a semi-automatic bandsaw capable of making miter cuts up to 90°. This bandsaw is a special-purpose machine and can be customized during production to meet your specific requirements. Technical Specifications - The machine is equipped with three wheels for cutting PE pipes - Vertical movement of the machine is guided by linear slide rails to suppress any vibrations, enabling smooth travel and precise cutting - Integrated air extraction and conveyor belt system for chip and dust removal - Hydraulic top clamping device on the machine vice to securely hold the material - Vertical movement, automatic miter rotation, material feed—all functions are controlled via a PLC touchscreen control panel - Miter rotation is performed by a servo motor - Portable control panel - Note: Special V-shaped roller tables with 78" infeed and 39" outfeed are included as standard; additional roller conveyors are available as optional accessories. The KLY 1850 is manufactured by a renowned Turkish producer for our distribution brand "GERD WOLLF Maschinenfabrik." Images shown are for reference only and do not represent the machine to scale.

Sąlyga: naudotas, Gamybos metai: 1992, - automatic material feed - max. cutting diameter 320 mm - saw band length 3660 x 34 x 1.1 mm - infinitely variable band speed 20–100 m/min - single material feed 400 mm / multiple feed up to approx. 4000 mm Hedpfx Asvzmt Uobmofr - year of manufacture 1992 - hydraulic blade tension indicator

Sąlyga: geras (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: 6535, Pasiūlymas 25230 Hidraulinis dviejų kolonų valdomas juostinis pjovimo automatas Hfsdpfx Aew I Scfsbmer Techniniai duomenys: - Automatinė pjovimo proceso eiga, hidraulinis pjovimo rėmo kėlimas/nuleidimas - Rankinis kampo reguliavimas su hidrauliniu fiksavimu - Automatinis medžiagos padavimo automatas, motorizuotas kampo reguliavimas - Juostos matmenys: 4400 x 34 x 1,1 mm - Pjovimo greitis: bepakopis reguliavimas 15–150 m/min - Pjovimo spaudimo reguliavimas: bepakopis 10–15 bar - Nusileidimo greitis: 0–300 m/min - Pjovimo sritis 90°: - Apvalus: 335 mm - Kvadratinis-plokščias: 500 x 335 mm - Medžiagos padavimo automatas: 5–2300 mm - Pavara: 400 V / 6,5 kW - Reikalinga vieta: apytiksl. Plotis 2400 x aukštis 1950 x gylis 2200 mm - Svoris: apytiksliai 1800 kg

Gamybos metai: 2003, Sąlyga: naudotas, Cutting capacity – Round: 300 mm Hfedora Rrlepfx Abmjr Saw blade dimensions: 3320 x 27 x 0.9 mm Cutting capacity – Rectangle: 330 x 260 mm Cutting capacity – Square: 260 mm Control system: Evolution Working height: 870 mm Saw blade speed: 40 / 80 m/min Machine weight: approx. 1050 kg

Sąlyga: labai geros būklės (naudotas), pjovimo aukštis (maks.): 550 mm, Hydmech 22 A Column-guided automatic saw Hfjdpev Sqxvofx Abmjr Sawing capacity: 550x550MM, straight cut The saw is well-maintained and has not been used extensively Includes a 6-meter heavy-duty roller conveyor

Sąlyga: naujas, Gamybos metai: 2025, Cutting diameter: 325 mm Saw band length: 4900 mm Hedpfxowp Tnae Abmofr Cutting width: 400 mm Round material: 325 mm Flat material: 400x325 mm Saw band dimensions: 4900x34x1.1 mm - New machine - - Fully automatic - - Mitre band saw - - Linear-guided - with hydraulic feed system, Cutting length and quantity input via NC control, hydraulic vice, coolant system, and hydraulic/mechanical blade tensioning * For more information regarding the exact standard configuration and available options, please visit our website or contact us directly *

Sąlyga: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, juostinio pjūklo ilgas: 4 400 mm, pjūklo juostos plotis: 34 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 335 mm, pjovimo plotis (maks.): 500 mm, pjovimo aukštis (maks.): 335 mm, TECHNICAL DETAILS Cutting diameter: 335 mm Saw blade dimensions: 4,400 x 34 x 1.1 mm Table height: 750 mm Smallest diameter: 5 mm Hfsdpfxswurvye Abmjr Cutting range at 90° round: 335 mm Cutting range at 90° flat: 500 x 335 mm Cutting speed: 15 - 150 m/min Bundle clamping range width / height: 0 - 500 / 15 - 335 mm Material feed single / multiple: 0 - 600 / 0 - 6,000 mm MACHINE DETAILS Machine weight: approx. 1,600 kg Space requirements: approx. 200 x 2,200 x 1,900 mm EQUIPMENT - Roller conveyor - Chip conveyor - Spray unit - Bundle clamping - Coolant system

Sąlyga: naudotas, Gamybos metai: 1981, Cutting diameter: 320 mm Saw band length: 4670 mm Cutting width: 580 mm Total power requirement: 7.4 kW Machine weight approx.: 3 t Cutting range, round max.: 100 - 320 mm Rectangular max.: 100/100 x 320/460 mm Cut-off lengths min/max.: 0 - 580 mm Throat depth (stand to saw band) max.: 690 mm Infinitely variable cutting speed: 16 - 160 m/min Saw band dimensions L x Ø approx.: 4,670 x 38 mm Remnant piece length automatic/single cut: 100/10 mm Hsdpfx Abjt Hwrnomsfr Saw blade drive approx.: 4.4 kW Total drive: 7.4 kW - 380 V - 50 Hz Weight approx.: 3,000 kg Accessories / Special equipment: - Infinitely variable speed control of the saw band motor via actuator and STÖBER gearbox, with cutting speed display on the control panel - Infinitely adjustable saw feed with display of the current cutting speed - Piece counter with preset quantity selection, selector switch for single or multiple cuts - Indicators for band tension and feed rate - Automatic, motorised material feed, controlled via position processor type PP 160, input of required lengths; supplied with roller conveyor approx. 1,500 mm (extendable to approx. 2,000 mm) and a more stable roller conveyor approx. 3,500 mm for outdoor use - Integrated chip conveyor with coolant system - Attached control cabinet Condition: Good – ready for demonstration shortly Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice We look forward to your order. Further saws available from stock – please enquire.

Sąlyga: geras (naudotas), Gamybos metai: 2001, Manufacturer: KASTO Model: KASTOtec A3 Year of manufacture: 2001 Specifications Metric Saw capacity round 90°: 330 mm Saw capacity flat 90°: 330 x 330 mm Maximum saw speed: 12 - 120 m/min Saw blade dimension: 6830 x 41 x 1.3 mm Power: 7.5 kW Dimensions (approx.): Hfodpfx Aju R R Acobmor Length: 4600 mm Width: 2150 mm Height: 2310 mm Weight: 4300 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, these details do not constitute representations or contractual terms. We recommend verifying all critical details independently.

Sąlyga: naujas, BMBS 300 x 320 CNC-G Fully automatic, CNC-controlled pivot frame metal bandsaw for mitre cuts up to +60° Description -Fully automatic, CNC-controlled pivot frame metal bandsaw for mitre cuts up to +60° -Hydraulically controlled system for both vices and the saw arm's operational steps -Ball-bearing rotary table -Equipped as standard with a frequency inverter for stepless adjustment of the blade speed from 20 - 100 m/min -BRP - Bandsaw blade monitoring -The jaws of both vices are equipped with long-stroke hydraulic cylinders as standard, eliminating the need for presetting according to material cross-section -Quality Made in Europe Technical data Electrical connection: 3 x 400 V / 50 Hz Hfedpfxocgz Suj Abmsr Motor output: 2.4 kW Speed levels: 2 Blade speeds: 20 - 100 m/min Blade dimensions: 3660 x 27 x 0.9 mm Dimensions (L x W/D x H) approx.: 2240 x 2710 x 2050 mm Table height material feed: 800 mm Weight approx.: 800 kg Minimum remnant workpiece length in CNC operation: 115+20 mm Cutting range at 0° round profile: 300 mm Cutting range at 0° solid round: 180 mm Cutting range at 0° square material lying flat: 320 x 300 mm Cutting range at -45° round profile: 300 mm Cutting range at -45° solid round: 110 mm Cutting range at -45° square material lying flat: 290 x 300 mm Cutting range at -60° round profile: 200 mm Cutting range at -60° solid round: 80 mm Cutting range at -60° square material lying flat: 190 x 190 mm Bundle cutting range round profile: 320 x 160 mm

Sąlyga: naujas, Gamybos metai: 2025, 2-column guided automatic metal band saw with stepless mitre adjustment from 90° to 45° to 30°. Especially suitable for universal use with varying cross-sections, materials, and frequently changing mitre cuts. The pivot point remains unchanged for all angle settings, ensuring precise length measurement at both 90° and within the mitre range. Technical data: Cutting capacity: - 90° round: 335 mm, flat: 500 x 335 mm - 45° right: 330 mm, flat: 320 x 335 mm - 30° right: 200 mm, flat: 200 x 335 mm Hedpfxsh S Nxze Abmefr Cut-off length: - Single stroke up to 600 mm, multiple stroke up to 6000 mm Cutting speed: - AC frequency-controlled drive, 15-150 m/min, continuously adjustable at the control panel With the following additional equipment: - Stand-alone control panel The following options are recommended: - Micro-spray unit - Laser light - Clamping pressure regulator - 7" CE panel - Mounting elements

Sąlyga: naujas, Gamybos metai: 2025, Cutting diameter: 350 mm Hsdewp Tlxopfx Abmefr Saw band length: 4160 mm Cutting width: 400 mm Round material: 350 mm Flat material: 400 x 350 mm Saw band dimensions: 4160 x 34 x 1.1 mm - New machine - - Fully automatic - - For single-sided mitre cuts - with control panel with touchscreen, coolant system, hydraulic vise, hydraulic-mechanical band tensioning, 1200 mm roller conveyor, and mechanical vertical clamping. * For more information on exact standard features and available options, please visit our website or contact us directly *

Sąlyga: naujas, CNC automatic hydraulic bandsaw for cuts from 0° to 60° to the right, compliant with all CE safety regulations. The machine features 9 programs, each consisting of 99 steps, for a total of approximately 890 cutting positions with integrated piece counter. Operation: material feed. Fixed vise clamping. Blade rotation and supply of coolant emulsion during the descent of the bow until the cut is completed, with the feeder carriage returning to the preset position. Bow return and stop of blade rotation and coolant supply. Fixed vise opening. Cycle repetition. Step-by-step feed via ball screw. CNC control of quantity and cutting length. Hydraulic unit with adjustable cutting pressure. Blade tensioning via manual handwheel rotation, secured by an electromechanical device. Hfodpfxsg Np Dxe Abmer Blade cleaning brush device. Bimetallic saw band 3010 x 27 x 0.9 mm. Hydraulic unit motor 0.75 kW. Cutting thickness 1.2 mm. Material feed stroke 600 mm. Electric pump 0.09 kW.

Gamybos metai: 2021, Sąlyga: naujas, Fastech Horizontal Bandsaw Fully Automatic BMSO 350 GA Cutting capacity (round) mm: 350 Cutting capacity (rectangular) mm: 400 x 350 Cutting capacity (square) mm: 350 x 350 +30° Round cutting range mm: 320 +30° Flat cutting range mm: 400 x 350 +30° Square cutting range mm: 350 +45° Round cutting range mm: 320 +45° Flat cutting range mm: 290 x 300 +45° Square cutting range mm: 290 x 290 Main drive motor power kW: 2.2 Hydraulic pump power kW: 0.37 Coolant pump power kW: 0.12 Infinitely variable blade speed mm/min: 20-100 Saw band dimensions mm: 4160x34x1.1 Working height mm: 760 Hfjdpfsg Ekt Nsx Abmor Weight kg: 1050 Length mm: 2450 Depth mm: 920 Height mm: 2020 Roller conveyor 1200 mm Infinitely variable blade speed Hydraulic vice Heavy-duty gearbox Hydromechanical saw band tension Saw band cleaning brush Control panel

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, juostinio pjūklo ilgas: 4 242 mm, High-Performance Fully Automatic Band Saw with sturdy double round-column construction and full enclosure. Designed to meet the highest sawing requirements. Technical Data: Cutting capacity: Ø 325 mm or 380 x 325 mm Saw band dimensions: 4242 x 34 x 1.1 mm Saw drive: 3.75 kW Working height: approx. 820 mm Weight: 2200 kg Connection: 400 V-50 Hz Including technical features: - Smart NC control with 5.7" HMI touch screen for up to 100 different programs - V-Drive Hedebrxk Uepfx Abmefr - Mitsubishi PLC control - Plain-text display of operator errors - Frequency-controlled saw drive, 15-100 m/min - Material database for easy adjustment of cutting parameters - Digital display of feed rate in mm/min and cutting performance in cm²/min - Display of saw frame position in mm - Automatic cut initiation, selectable with or without front-end cut. Length of front-end cut can be freely programmed - LED strip work light - LED signal tower to visualize machine status - Automatic positioning of band guide arm - Vibration damping roller for vibration-free cutting - Adjustable hydraulic chip conveyor - Clamping pressure regulation for both vises - Hydraulic saw band tensioning with band breakage monitoring sensor - Coolant system with additional cleaning nozzle - Saw start recognition via rapid traverse button - Manual material positioning via slow-motion function - Automatic cutting pressure regulation, preset by material quality - Material retraction after completion of sawing process to protect the saw blade when raising - Integrated infeed-side material support approx. 1,500 mm - Discharge table with coolant return approx. 500 mm

Sąlyga: naujas, MEP SHARK 350 NC HS 5.0 Fully Automatic Twin-Column Metal Band Saw Article Number: MEP SHARK 350 NC HS 5.0 Motor Power: 4.0 kW Vise Opening: 355 mm Blade Dimensions: 4640x34x1.1 mm Weight: 2,800 kg Cutting Speed: 15 - 115 m/min, infinitely variable Cutting Capacity 0°: 350 / 350x350 mm Cutting Capacity 45° right: Cutting Capacity 45° left: Cutting Capacity 60° right: Cutting Capacity 60° left: Description: Automatic hydraulic band saw featuring a twin-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Numerically controlled bandsaw, also capable of semi-automatic operation, equipped with the new MEP 50 control system, specifically developed by MEP for automatic machines, based on Windows-2 "CE". Hodpfx Asi Hmcdebmjfr Standard features include: Powered swarf conveyor, can be installed on either the right or left side of the machine. Vise pressure regulation for the clamping jaws. Material feeder with vertical rollers for side support. Clamping pressure regulation. Storage capacity for 100 programs. The machine can be supplied with either a 34 mm or 41 mm band at no additional cost.

Sąlyga: naujas, Gamybos metai: 2025, Automatic material feed Double-sided mitre cutting Compact design Precise material positioning via servo positioning technology State-of-the-art electric saw feed with ball screw spindle: Maximum cutting performance and quality while being gentle on the saw blade Unique and patented double mitre system: Material is always clamped at a right angle Cutting area in mm: 90° round 335, flat 500 x 335 45° right round 330, flat 320 x 335 45° left round 305, flat 305 x 335 Hjdpfx Abjh S Nxdemjfr 30° right round 180, flat 170 x 335 Minimum remnant length without bundle clamping: Manual: 80 mm Automatic: 300 mm Automatic cutting pressure and feed monitoring Frequency-controlled AC drive, 15-150 m/min Hydraulic full-stroke clamping of material Automatic movement of clamping jaws Minimum speed and saw blade monitoring Electrical mitre adjustment via servomotor Visual program input via CNC control Material feed via servo-controlled ball screw drive The following options are recommended: Micro-spray unit Clamping pressure regulator Machine stand/support elements

Sąlyga: labai geros būklės (naudotas), Frietsch PJOVIMO STAKLĖS KASTO pjovimo staklių pirkimas ir pardavimas Gerbiami ponios ir ponai, Hfedpfx Aofh Huksbmor Mes perkame ir parduodame, renovuojame, remontuojame ir dažome KASTO pjovimo stakles. Daugiau nei 40 metų turime patirties su KASTO pjovimo staklėmis ir esame specializavęsi jų remontuose. Staklės atnaujinamos kvalifikuoto personalo pagal KASTO gamyklos standartus. Taip pat ieškome pagal jūsų poreikius KASTO pjovimo staklių renovacijai. Geras kainos ir kokybės santykis dėl profesionalaus staklių remonto.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Apvalaus plieno pjovimo diapazonas ties 90°: 300 mm, Band saw automaton with infinitely variable band speed, capacity 300 mm Ø, incl. chip conveyor and infeed roller conveyor approx. 2 meters Hedpfeqxu T Tex Abmofr

Sąlyga: naujas, Bernardo Fully Automatic Double Column Bandsaw BSM 330 NC Pro Technical Specifications Cutting capacity round: 90° 330 mm Cutting capacity flat: 90° 330 x 330 mm Cutting capacity square: 90° 330 x 330 mm Working height: 635 mm Cutting speeds: (NC PRO) 20 - 80 m/min Saw blade dimensions: 4115 x 34 x 1.1 mm Coolant pump: 0.135 kW Hydraulic pump motor power: 0.75 kW Main drive motor power: 4.0 kW Machine dimensions (LxWxH): 2520 x 2280 x 1630 mm (Depth: 3690 mm with infeed roller conveyor) Weight approx.: 1990 kg Scope of delivery: • Saw blade • Hydraulic vice • Pressure gauge for blade tension Hfedpfxsqzhxij Abmjr • Hydraulic blade tension • Hydraulic workpiece feed • Chip conveyor (NC Pro) • Coolant system • Hydraulic downfeed cylinder • Work light • Delta frequency inverter (NC Pro) • Motor protection switch • Automatic shut-off • Adjustable cutting pressure • Delta PLC control • Automatic blade breakage monitoring • Hydraulic bundle clamping device • Infeed roller conveyors

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, juostinio pjūklo ilgas: 3 200 mm, Fully-automatic Mitre Band Saw for cuts from 90° to 60° (30°) with CNC control for input of up to 10 programs with 20 subprograms each for length and quantity. The starting position of the cut is automatically stored at the beginning of the sawing process. Technical Data: Cutting range max. Ø 300 or 320 x 290 mm Cutting speed: 20 - 90 m/min Working height: approx. 850 mm Hodpfxjwlnkzo Abmefr Drive power: 2.2 kW Saw blade dimensions: 3200 x 27 x 0.9 mm Equipment: - Hydraulic hold-down device - Micro-spray system