"Behringer HBP" valdymo skydeliai

B&R BT 41 - Behringer

Sąlyga: naujas, Gamybos metai: 2025, Cutting diameter 335 mm Saw band length 4400 x 34 x 1.1 mm Table height 750 mm Feed rate 5 – 2300 mm per stroke Cutting range at 90 degrees: flat 500 x 335 mm Cutting range at 45 degrees: round 330 mm Cutting range at 45 degrees: flat 320 x 335 mm Cutting range at 45 degrees: round left 305 mm Cutting range at 45 degrees: flat left 305 x 335 mm Cutting range at 30 degrees: round 180 mm Cutting range at 30 degrees: flat 170 x 335 mm Cutting speed 15 – 150 m/min Workpiece weight max. 250 kg/m Total power requirement 3.0 kW Machine weight approx. 2550 kg Space requirement approx. 4350 x 2300 x 1900 mm Todpfjulnb Dox Ag Rjf Standard equipment of the MEBAeco 335 DGA-2300: - CE-compliant access protection with light barrier - MEBA automatic bandsaw in proven twin-column linear design and integrated MEBA gripper feed system, feed range 5 – 2300 mm per stroke - MEBA visualized program input with CNC control Fully automatic operation at any angle setting 30° – 135°, length and quantity. User-friendly program creation and management of up to 255 programs. Operators enter the sawing task into the display mask using a cutting diagram. Input errors are minimized, ensuring simple and reliable creation of production jobs by different operators. - MEBA High-Performance Package: Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring. This ensures optimal conditions for every sawing task, i.e. constant pressure for solid materials and constant feed for thin-walled profiles. - Fast and precise material length feed via rack and pinion and AC drive with max. stroke length of 2300 mm, with integrated roller conveyor up to 3000 mm. - Both sides of the gripper feed vices can be opened. Ribbed strips for heavy material transport. - Saw frame made of heavy-duty, vibration-damping steel welded construction. - Saw band inclined 3° to material support surface for maximum cutting performance and blade life when sawing structural steel profiles. - Combination saw band guide, precision bearings to protect the saw band in the return section. Chamfered carbide slide guides for saw band guidance. - Miter rotation point (zero point) is the intersection between saw band and fixed vice—no change in length dimension when changing the miter angle. Automatic compensation of kerf width at every angle position. - NC angle programming. Control panel is stand-alone (standard for these machines). - Patented double miter vice system (ERP No.). Automatic positioning of vices: The material clamping vice automatically travels along the cutting direction according to the desired miter, ensuring the material is always squared and clamped close to the saw band. Clamping via full-stroke cylinders. - Rapid approach lowering of the saw frame via automatic height control bar until just before the material. In series cutting, the saw frame moves just above the material, allowing fast positioning of the next section—optimal cycle times in single and series cutting. - AC frequency-controlled saw band drive, infinitely variable 15 – 150 m/min. - Backlash-free preloaded, low-maintenance linear recirculating ball guides on material feed and saw frame feed for smooth, jerk-free operation.

Sąlyga: naujas, Table length: 1200 mm Table width: 1200 mm Table height: 900 mm Table load capacity: 3000 kg Machine weight approx.: 0.32 t Tedpfjd Iinfox Ag Rof Dimensions (L x W x H): 1.2 x 1.2 x 0.9 m Welding table / perforated table: Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Plasma nitriding provides a hard surface layer. Height adjustable from approx. 880 to 980 mm Base reinforced with ribs for added strength. Including floor bearing Accessories optional!!!

Gamybos metai: 1995, Sąlyga: labai geros būklės (naudotas), Technical Data Tjdpfx Asf Dvzcsg Ref Manufacturer: Brown & Sharpe Model: DEA Mistral Year of manufacture: 1995 Measuring Range X = 1500 mm Y = 1000 mm Z = 900 mm Equipment Renishaw PH10M Probe Head TP200 Probe System + Probe Change Rack with 6 Slots Software: PC-DMIS Version 4.2 (as of 2008) PC (Windows XP), monitor, inkjet printer, computer table The machine can be upgraded with new accessories according to customer requirements. Price: On request! Installation and commissioning available! We would be pleased to provide you with a detailed quotation. Please note: Our offer is exclusively aimed at professional customers. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale!)

Sąlyga: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangle 1250 x 600 mm Cutting capacity at 45 degrees: round 680 mm Cutting capacity at 45 degrees: square 600 mm Cutting capacity at 45 degrees: flat 870 x 600 mm Cutting capacity at 60 degrees: round 580/550 mm Cutting capacity at 60 degrees: square 530/450 mm Cutting capacity at 60 degrees: flat 550 x 450 mm Saw blade length: 8140 x 54 x 1.6 mm Blade speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight approx. 5.3 t Required floor space approx. 5.75 x 4.2 x 2.75 m 2-column double mitre band saw for fast cutting equipped with pusher system P15; option: P30 Hydraulic saw frame lowering • NC-controlled Tsdjfg E Hnepfx Ag Rof • Automatic angle positioning from +60° to -60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Highest positioning accuracy is achieved with the new B&S Positioning System. An intelligent NC control ensures smooth interplay of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake via large-diameter central positioning. The work table is mounted on high-quality preloaded bearings, which ensure smooth and easy rotation. CNC control A CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities and mitre angles. Dual-side gripping positioning system The B&S pusher system, feeding and positioning system, is equipped with ‘dual-side opening gripper tongs’ which are hydraulically controlled. This guarantees secure gripping and transportation of materials and bundles that deviate slightly from the ideal form. The pusher system is set up separately and is guided by ball-bearing linear guides, a precision-ground rack, and a frequency-controlled, robust geared motor.

Sąlyga: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and best-in-class performance when cutting specialty steels. Tsdpfx Aefg E Hpeg Rof • The electro-welded machine frame and steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and the speed is adjustable. • All machine movements (saw frame, vise, feed, saw band guides) are controlled by modern linear guides, ensuring high static and dynamic load capacity as well as minimal sliding friction. • Another key feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping positioning. • Thanks to the height control of the saw band position, the operator can place the blade close to the top edge of the material. After the cut, the band automatically returns to its previous position. Alternatively, 'remain' at the lower position can be selected. During the cutting cycle, the software compares the sawing load with the preset value. Thus, the sawing system can be stopped in the event of irregularities. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly smooth operation at a constant pressure. • Finely ground carbide inserts clamp the saw band, complete with lateral, hardened, adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. The tension is automatically released after a preset time if the machine is idle or after completion of a cycle. • Automatic version with CNC control in X-TECH 900 / 1200 models, with a feed length of 500 mm, available for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, ensuring precise positioning even under maximum load. • All guided movements are driven by four recirculating ball guides, designed for high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2016, Pagrindinė pavara Ašių skaičius: 6 Stalas Stalo apkrova: 15 kg Papildoma įranga Premium valdymo pultas su sieniniu laikikliu ir kabelio laikikliu Išorinė dujų valymo sistema Reguliuojamas elektro-pneumatinis vožtuvas Vielos padavimo įranga Šis 6 ašių CLOOS QRC 350 QIROX suvirinimo robotas pagamintas 2016 m. Didžiausia apkrova – 15 kg, darbo zonos pasiekiamumas – 3400 mm, įdiegta pažangi V6 valdymo sistema. Robotas komplektuojamas su 450A Qineo Pulse A suvirinimo aparatu, užtikrinančiu tikslų ir efektyvų suvirinimą. Robotas aprūpintas prisilietimo jutikliu ir lanko jutikliu didesniam tikslumui darbo metu. Pasinaudokite galimybe įsigyti šį CLOOS QRC 350 QIROX suvirinimo robotą. Dėl daugiau informacijos kreipkitės į mus. Pritaikymas Tsdowk Rrxopfx Ag Ref Suvirinimas

Sąlyga: naujas, Gamybos metai: 2024, veikimo valandos: 5 h, Funkcionalumas: visiškai funkcionalus, Pilnai automatinės arba pusiau automatinės CNC vamzdžių lenkimo ir pjovimo staklės. Vamzdžių skersmuo nuo 6,0 iki 150,0 mm. CNC lenkimo, siaurinimo ir pjovimo staklės, galima individuali konstrukcija. Nauji įrenginiai sandėlyje pardavimui. Paskelbta kaina galioja 2,5 colio vamzdžio type60nc lenkimo staklėms. Tsdpovl S Dgofx Ag Rsf

Sąlyga: naujas, Gamybos metai: 2025, Arbeitsbereich: 6100mm*1524mm / 4000mm*1524mm / 3048mm*1524mm Laser-Ausgangsleistung: 3000W / 2000W / 1500W / 1000W Positioniergenauigkeit: ±0,05mm Wiederholgenauigkeit: ±0,03mm Max. Verfahrgeschwindigkeit: 91m/min Max. Beschleunigung: 1G 1. Gestreckter Aluminiumträger Luftfahrtqualitäts-Aluminium mit erhöhter Steifigkeit reduziert Verformungen des Trägers bei Hochgeschwindigkeitsbetrieb erheblich und verbessert die Richtungssteuerung sowie die Prozesseffizienz bei hoher Geschwindigkeit. 2. Tragrahmen mit Zapfen-und-Mortise-Schweißkonstruktion Verwendung der traditionellen chinesischen Zapfen-und-Mortise-Technik für eine erhöhte Tragfähigkeit. Durch Verschweißung und strukturelle Verbindungen wird dauerhafte Betriebssicherheit gewährleistet. Die geschweißte Konstruktion verbessert die Schwingungsdämpfung, minimiert abweichungen durch Erschütterungen und sorgt für präzisere Schnitte. 3. Doppelte, elektrisch angetriebene Selbstzentrierungs-Spannfutter Doppelte elektrische Spannfutter mit automatischer Zentrierfunktion ermöglichen eine einfache Bedienung und einen geringen Wartungsaufwand. Der neue Motor gewährleistet eine präzise Steuerung. Modular aufgebaute Spannfutter-Komponenten sind eigens entwickelt und lassen sich schnell austauschen. Tjdpfxjg Eglpj Ag Ref 4. Automatische Fokusfunktion des Laserkopfs Durch separate Einstellung der Fokuslänge für die Perforation und das Schneiden wird eine höhere Schnittpräzision erreicht. Geeignet für verschiedene Brennweiten, wobei die Fokusposition passend zur Materialdicke automatisch angepasst wird. 5. Niederdruck-Gasalarmfunktion Echtzeit-Erkennung des Gasdrucks sowie Ausgabe von Störmeldungen gewährleisten Schnittqualität und -genauigkeit und erinnern die Bediener rechtzeitig an den Gaswechsel.

Sąlyga: naudotas, Gamybos metai: 2004, x eiga 3 000 mm y eiga 1 000 mm z eiga 860 mm Valdymas Heidenhain iTNC-530 Stalo dydis 3 600 x 1 050 mm T-plyšiai 7 x 18 T-plyšių atstumas 125 mm Atstumas stalviršis – veleno apatinė kraštinė 25–366 mm Stalo apkrova 4 200 kg b ašis ±105° c ašis ±360° Greičio eiga x/y/z 30 000 mm/min Pasukamo stalo skersmuo 1 000 mm Maks. sukimosi skersmuo 1 400 mm Veleno apsisukimų dažnis 9 000 aps./min. Tsdpfx Ajwqr Nleg Rsf Įrankio laikiklis ISO-50 DIN 69871-AD Veleno variklis 28,5 kW Veleno sukimo momentas 240 Nm Įrankių keitimo įrenginys AITEK, 40 pozicijų Didžiausias įrankio svoris 20 kg Rankinis išorinis valdiklis įsk. Sūpavimo režimas įsk. Drožlių transporteris įsk. Vidinis aušinimas, 20 barų Bendras energijos poreikis 65 kW Mašinos svoris apie 24,8 t Bendra matmenys apie 8 056 x 5 496 x 3 790 mm

Gamybos metai: 2024, Sąlyga: naujas, The robust manual length stop MD 100 m enables you to efficiently increase the productivity and quality of your production. The operator can quickly and accurately position the carriage at the desired location. The specially developed clamping system provides the carriage with a very high holding force. Length measurement is performed using an easy-to-read measuring tape with mm graduation. Existing machines/conveyor roller tables can be retrofitted at any time. Product details: • Suitable for positioning steel profiles and solid material • Carriage features triple ball-bearing guidance • Smooth operation allows for fast and precise length positioning • Manual stop clamping via large adjustable hand knob • Specially developed clamping system with very high holding power • Manual arm raising and lowering • Measuring rail with measuring tape and vernier (resolution 0.10 mm) • Standard measuring lengths: 1 m to 6 m, maximum up to 20 m • Total system length = measuring length + 0.3 m • Available in left or right-hand versions Tsdsidlpiopfx Ag Rof • Mounting screws included • Accessories: - Stop arm with spring damping - Manual arm return via hand lever - Arm return with shock absorber via pneumatic cylinder - Various material roller conveyors available Plantec Maschinen GmbH