Juostinis pjūklas Horizontalus juostinis pjūklas yra visiškai automatinis

Fastech BMSO 350 GA

Būklė: nepatikrintas (naudotas),

Būklė: geras (naudotas), Gamybos metai: 2014, Spindle speeds: 170 – 18,000 rpm Machine weight: approx. 7.5 t Space requirements: approx. 5.00 x 4.00 x 2.20 m --> Control system retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data – Grinding diameter: 20 – 300 mm --> Swing diameter: 350 (500) mm --> Workpiece length: 300 (1,300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm Dcjdpfxsw Intae Af Ajg --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min --> Grinding stroke speed: 0 – 9.99 m/min --> Infeed speed: 0 – 99.99 m/min --> Step infeed value during reversal: 0 – 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min / revolution --> Grinding stroke speed: 0 – 5 m/min / revolution --> Infeed speed: 0 – 99.99 m/min / revolution --> Step infeed value during reversal: 0 – 0.999 mm / Ø --> Swiveling capability of the workpiece spindle head: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Traverse speed: 5 m/min --> Center height above workpiece table: 200 (300) mm --> Center height above grinding table: 330 (430) mm --> Workpiece spindle bore: 50 (70) mm --> Original year of manufacture: 1988

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Zum Verkauf steht eine komplette Produktionslinie für PVC-Fensterbau der Marke URBAN, bestehend aus: *1. Zwei-Kopf-Schweißmaschine; Marke URBAN, Modell: AKS 5305-FF, Seriennummer: 53372, Baujahr: 2007, voll funktionsfähig; *2. Nutfräsmaschine; Marke URBAN, Modell: WS 103, Seriennummer: 790, Baujahr: 2007, voll funktionsfähig; *3. Doppelgehrungssäge: Marke RAPID, Modell DGS 100, Seriennummer: 004606128, Baujahr: 2010, wird mit Absauggerät mit Filtersäcken verkauft, voll funktionsfähig; *4. MACC Stahltrennsäge, Modell NEW 275, Seriennummer: 88266, Baujahr: 2008, voll funktionsfähig; *5. Pantograph der Marke URBAN, Modell MLA A23 – 100466321S, Seriennummer: 528-0, Baujahr: 2008, voll funktionsfähig; *6. Vertikalfräsmaschine; Marke URBAN, Modell M7CRH-100149891, Seriennummer 559, Baujahr: 2008, voll funktionsfähig; *7. Entgratmaschine mit 2 Fräsaggregaten; Marke URBAN, Modell SV 280, Seriennummer: 29342, Baujahr: 2008, voll funktionsfähig; *8. Stabtrennsäge; Marke URBAN, Modell GLS 102, Seriennummer: 102015, Baujahr: 2010, voll funktionsfähig; Dsdoucl Dcopfx Af Aocg Die Produktionskapazität der Linie beträgt 30–50 Einheiten/8h (abhängig von der Anzahl der Bedienpersonen). Die Linie war von 2010 bis 2014 nur sehr wenig und nicht unter voller Auslastung im Einsatz. Einzelmaschinen aus der Linie können auf Anfrage verkauft werden. Nettopreis komplette Linie: 33.500 Euro zzgl. MwSt., verhandelbar, FCA Oradea.

Būklė: naudotas, Gamybos metai: 1984, x-axis travel: 2500 mm Djdetqqnwepfx Af Ascg y-axis travel: 750 mm z-axis travel: 1000 mm Table clamping surface: 2550 x 800 mm Spindle taper: SK 50 Control: HEIDENHAIN TNC 150 B Machine weight approx. 16 t

Būklė: naujas, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Dcsdpsd Iipmjfx Af Aeg Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation due to inclined cutting, feed rate and cutting pressure control • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning) • Energy-efficient and low-vibration operation through inclined cutting • Ergonomic, safe, and freestanding control panel • Frequency-controlled saw drive 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-diameter flywheels (520 mm) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to start of material or cut immediately for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Būklė: naujas, Gamybos metai: 2024, mašinos/transporto priemonės numeris: 302340, Ring bending machine Manufacturer: KB Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Dcodpfx Afed S Uf Sj Ajg Bending capacity: Round tube up to 48 x 3.0 mm Flat bar (upright) 50 x 10 mm Square tube 40 x 40 x 3 mm Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3 phase.

Gamybos metai: 2004, būklė: labai geros būklės (naudotas), Four-side planer - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers in the table Dsdpfx Afohlp D No Ajcg - Chrome-plated table - Infinitely variable feed speed adjustment - 2 overhead transfer rollers in front of the bottom head, plus a roller device for short elements - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Būklė: geras (naudotas), Gamybos metai: 2002, mašinos/transporto priemonės numeris: V020113, veikimo valandos: 43 000 h, AMADA MODEL HFT 8025, siła nacisku 80 ton x 2500 mm długości gięcia, hydrauliczna prasa krawędziowa typu downstroking, wyposażona w sterowanie CNC. Model: Amada HFT 8025, prasa krawędziowa CNC typu downstroke Rok produkcji: 2002 Siła nacisku: 80 kN Sterowane osie: Y1, Y2, X, R Maksymalna długość gięcia: 2500 mm Wysokość otwarcia: 470 mm Dcjdpfx Ajuwktnef Ajg Prędkość dojazdowa: 100 mm/s Prędkość gięcia: 1 - 10 mm/s Prędkość powrotu: 1 - 100 mm/s Pojemność zbiornika oleju: - Moc silnika: 9 kW Masa: 5750 kg Długość stołu: 2500 mm Szerokość stołu: 180 mm Wysokość otwarcia: 470 mm Wgłębienie (głębokość gardzieli): 420 mm Sterowanie CNC

Gamybos metai: 2025, būklė: naujas, Standard version with column Motorized height adjustment 700 mm Articulated arm length 2 x 1,100 mm Grinding spindle height adjustment 130 mm Grinding motor 5.5 kW Dedpfx Aegn Tzlof Aocg Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm + Pneumatic grinding pressure support + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and installation template Grinding tools optionally available Request more information

Būklė: naujas, Bernardo Universal Lathe Titan 660 x 2000 Technical Specifications - Distance between centers: 2000 mm - Center height: 330 mm - Swing over bed: 660 mm - Swing over gap: 900 mm - Swing over cross-slide: 460 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle mounting: DIN 55029, D1-8 - Speed range (16 steps): 25 – 1600 rpm - Longitudinal feed range (25 steps): 0.044 – 1.48 mm/rev - Cross feed range (25 steps): 0.022 – 0.740 mm/rev - Metric threads (54): 0.45 – 120 mm - Inch threads (54): 7/16 – 80 TPI - Quill diameter: 90 mm - Quill travel: 235 mm - Quill taper: MK 5 - Motor power: 7.5 kW (10.0 HP) - Machine dimensions (W x D x H): 3630 x 1200 x 1520 mm - Weight approx.: 2900 kg Features - Versatile applications in general engineering, production, single-part manufacturing, etc. - Central, user-friendly controls for feeds and threads with lead and feed screw - Prism bed made of grey cast iron, inductively hardened and precision ground - Modern main spindle bearing with precision angular contact roller bearing - Hardened and ground gears and shafts, including those in the feed gearbox Dcodpfx Afsfbbx Rj Asg - Rapid traverse for longitudinal and cross feed as standard, reducing non-productive time - Large spindle bore (105 mm) for workpieces with large diameters - Smooth start via mechanical multi-plate clutch - Electromechanical foot brake to reduce non-productive time - Optimal machining performance, even in face turning operations - The bed is reinforced with heavy ribs to stiffen the bed guideway and minimize vibration influence Scope of Delivery - 3-axis digital readout ES-12 V with LCD display - Slip clutch - Rapid traverse for longitudinal and cross feed - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - Face plate 450 mm - Fixed steady rest – max. workpiece diameter 180 mm - Travelling steady rest – max. workpiece diameter 120 mm - 2 live centers - Motor with magnetic brake (CE-compliant) - Foot pedal with braking function (CE-compliant) - Initial filling with Shell Tellus 46 - Coolant system - Quick-change tool post with 4 holders - Safety guard for quick-change tool post - Change gears - Reducing sleeve - Chip guard (rear panel) - Cable management via energy chain - Operating tools