Hidrauliniai vieno stulpo presai pirkti naudotą (71)

Būklė: naudotas, Gamybos metai: 1985, Technical details: Pressure: 3 t Throat depth: 150 mm Maximum ram stroke: 280 mm Shut height with bolster plate (ram/top): 355 mm Distance table/ram: 355 mm Bolster plate on table: 280 x 290 x 50 mm Passage opening in table: Ø 100 mm Ram speed, advance: 0.1 m/s Ram speed, return: 0.3 m/s Pin hole in ram: Ø 20 x 40 mm Height above floor: 800 mm Total power requirement: 1.5 kW Machine weight approx.: 370 kg Machine dimensions approx. LxWxH: 0.8 x 1.2 x 1.9 m The single-column press is mounted on a subframe (welded sheet steel construction) Operation via footswitch Iedou Nfvbopfx Alrsau The press has been retrofitted: - Mount for foil with punching device with automatic feed (pneumatic) - FIBRO punching device (plastic disc with Ø 47.5 mm for punching) - Foot control

Būklė: naudotas, Gamybos metai: 1983, Technical details: Pressure: 160 t Iaedpfx Alou Nfvuersu Throat depth: 360 mm Ram stroke - max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through opening in table: 4x Ø 62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram area: 450 x 850 mm Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Manual counter i.e. *

Būklė: naudotas, Technical details: Pressing force: 2.3 t Stroke: 280 mm Throat depth: 155 mm Ram stroke - max.: Forward: 0.08 m/sec Installation height with clamping plate ram/top: 355 mm Distance table/ram: max. 355 mm Clamping plate on table: 280 x 280 mm Pass-through opening in table: Ø 100 mm Ram speed forward: 0.08 m/s Ram speed return: 0.32 m/s Pin hole in ram: Ø 20 x 45 mm Height above floor: 725 mm Total connected load: 1.1 kW Machine weight approx.: 0.5 t Isdpfx Aeu Nfwljlreau Machine dimensions approx. LxWxH: 0.6 x 0.7 x 1.6 m Press with mechanical two-hand operation. Pressure test up to 2.3 t performed. Good condition.

Būklė: naudotas, Gamybos metai: 1991, Technical Details: Iaedpfxew D Awmo Alreu Pressure: 160 t Stroke: 500 mm Throat depth: 360 mm Maximum ram stroke: 500 mm Distance table/ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through hole in table: 4x Ø62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram surface: 450 x 850 mm Pin hole in ram: 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7,200 kg Approx. dimensions (LxWxH): 2.1 x 1.4 x 3.4 m

Būklė: geras (naudotas), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height: 850 mm Bolster plate thickness: 100 mm Throat depth (C side): 360 mm Isdpfx Aljwp Nv Hereau Specifications Metric | US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Approach speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Approximate Dimensions Length 2,150 mm Width 1,250 mm Height 3,600 mm Weight 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, this does not constitute any representation or contractual terms. We recommend you verify all important details.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 30 t, stalo plotis: 600 mm, stalo ilgis: 600 mm, bendras ilgis: 1 869 mm, bendras plotis: 850 mm, bendras aukštis: 2 620 mm, bendras svoris: 2 900 kg, Hidrobrasil C-Frame Press – 30 t – 600 × 600 mm – 400 mm Stroke For sale is a hydraulic C-frame press from Hidrobrasil with a pressing force of 30 t and a compact design. The machine features a table size of 600 × 600 mm, making it ideal for assembly, straightening, and pressing tasks, as well as for small batch production in workshop and manufacturing environments. ==== Technical Data & Information: Hydraulic C-Frame Press – 30 t ==== General Information - Manufacturer: Hidrobrasil - Model: C-Frame Press - Design: C-frame construction - Machine Type: Assembly Press - Pressing Force: 30 t - Machine Weight: approx. 2.9 t ==== Working Area - Stroke: 400 mm ==== Table & Ram - Table Dimensions: 600 × 600 × 100 mm - Clearance behind table: 50 mm - Table clamping points: 600 / 800 / 1000 mm ==== Speeds - Downward speed: 10 mm/sec - Return speed: 24 mm/sec ==== Hydraulics & Drive - Motor power: 3 kW - Oil tank: 60 l ===== Iasdpfx Aovhcykolrsu Assembly work, press-fitting operations, straightening work, workshop use, small-scale production Hydraulic Press, C-Frame Press, Single-Column Press, Assembly Press, Industrial Press

Būklė: naujas, Gamybos metai: 2026, spaudimo jėga: 100 t, Durendus DCD-100 – Hydraulic Deep Drawing Press in C-Frame Design 15–100 t – 800 × 600 mm For sale: a single-column hydraulic press with deep drawing capability (C-frame, C-press) from Durendus, featuring an adjustable press force from 15 to 100 t. This machine is designed for demanding forming, deep drawing, and assembly processes, and comes equipped with an integrated deep drawing cushion and modern Siemens control system. Thanks to its high travel speeds and precise control, it is suitable for both series production and flexible single-part applications. ===== Technical Data & Information: Hydraulic Single-Column Press – DCD-100 === General Specifications - Manufacturer: Durendus - Model: DCD-100 - Design: C-frame / Single-column press - Press force: 15–100 t (adjustable) - Total weight: approx. 6,500 kg - Overall dimensions: approx. 1,850 × 1,845 × 3,520 mm - Table height above floor: 1,000 mm === Working Area - Max. distance table – ram: 1,000 mm - Stroke: 0–700 mm (adjustable) === Table & Ram - Table size: 800 × 600 mm - Ram size: 800 × 600 mm - T-slots: according to DIN 650, 18 mm, cross pattern === Speeds - Rapid traverse speed: 180 mm/s - Working speed: 22 mm/s - Return speed: 180 mm/s === Hydraulics & Drive - Operating pressure: max. 250 bar - Main pump: Bosch Rexroth, approx. 65 l/min - Motor power: 11 kW + 1.5 kW - Oil tank capacity: approx. 280 l - Hydraulic block: Duplomatic - Filter: Filtrec - Cooling: air cooler === Additional Features - Deep drawing cushion: 50 t, stroke 250 mm, speed 50 mm/s - Ram ejector: 10 t, stroke 100 mm === Control & Operation - PLC: Siemens S7-1200 - Touch panel: Siemens SIMATIC 10" - Programmable: up to 99 programs - Adjustable: pressure, stroke, speed, lubrication - Positioning accuracy: up to 0.1 mm - Remote maintenance possible === Safety & Equipment - Two-hand operation - Safety PLC - Monitoring of all operating states via display - Oil temperature and filter monitoring - Automatic shut-off in case of overheating Iedpfxoyw I T Hs Alroau ===== Deep drawing, forming, assembly work, stamping processes, series production, toolmaking Single-column press, C-press, deep drawing press, hydraulic press, industrial press, tryout press, tool tryout press Looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives, as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian Safety Regulation NR 12, which builds on these standards. Our strengths lie in special purpose machinery construction and press automation. We supply custom-made hydraulic presses at surprisingly competitive prices. Leading European components are predominantly used for the hydraulics of our presses.

Būklė: naujas, Gamybos metai: 2022, spaudimo jėga: 100 t, Single-column press – Manufacturer: Hidrobrasil – 100 t C-frame press – Table Ø 1050 mm For sale is a high-performance hydraulic single-column press (C-frame) from Hidrobrasil, offering a pressing force of 100 t. This machine is engineered for industrial applications, delivering optimal conditions for demanding forming, assembly, and production processes due to its high speed and robust construction. ==== Technical Data & Information: Hydraulic Single-column Press – 100 t ==== General Specifications - Manufacturer: Hidrobrasil - Model: Single-column press / C-frame press - Design: C-frame construction - Pressing force: 100 t - Machine weight: approx. 3,500 kg - Dimensions (W × D × H): approx. 1,354 × 2,005 × 2,595 mm ==== Working Area - Daylight opening: 350 mm - Stroke: 300 mm ==== Table & Ram - Table diameter: Ø 1,050 mm ==== Speeds - Approach speed: 250 mm/s - Pressing speed: 3 – 15 mm/s - Return speed: 150 mm/s ==== Hydraulics - Number of cylinders: 2 - Cylinder diameter: Ø 250.97 mm - Piston diameter: Ø 41.76 mm - Operating pressure: max. 210 bar - Retraction force: 10 t - Additional ejector force: 5 t - Additional stroke: 150 mm ==== Hydraulic Unit - Pump capacity: 44.5 l/min - Pump-motor ratio: 27.59 cm³/rev - Motor output: 14.24 kW - Motor speed: 1,500 rpm - Oil tank volume: 350 l ===== Iodjhmi T Uspfx Alrjau Assembly work, metal forming, series production, heavy-duty applications, toolmaking, industrial pressing operations Single-column press, C-frame press, hydraulic press, industrial press, production press, heavy-duty press, tool tryout press, tryout press, tool try-out press Looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are manufactured in accordance with German Machinery Directive, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Moreover, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety directive NR 12, which builds upon these standards. Our core strengths are special machine construction and press automation. We supply customized hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers.

Būklė: naudotas, Gamybos metai: 2021, mašinos/transporto priemonės numeris: A2536805, spaudimo jėga: 40 t, Hidralmac Single Column Hydraulic Press – 40 t Forging Press – Stroke 250 mm For sale is a hydraulic single column press (C-frame) from Hidralmac with a pressing force of 40 t. The machine is designed for forging, forming, and bending applications, and can be custom-built to customer specifications. Thanks to adjustable speeds, precise position control, and flexible operating modes, the press is suitable for both manual setup operations and fully automated processes. ==== Technical Data & Information: Hydraulic Single Column Press – 40 t Iasdpfx Aofxyhfslrou ==== General Data - Manufacturer: Hidralmac - Model: Single Column Press / Forging Press - Design: C-frame press - Pressing force: 40 t - Lead time: approx. 3 months from receipt of payment ==== Working Area - Open height: 450 mm - Stroke / travel: 250 mm ==== Table & Ram - Table plate: 600 × 650 mm with T-slots - Ram plate: 500 × 200 mm - Table cut-out: 200 × 170 mm - Table height: 850 mm ==== Speeds - Approach speed: max. 90 mm/s - Pressing speed: 10 mm/s - Return speed: max. 90 mm/s - Setup mode: approx. 9.5 mm/s ==== Hydraulics & Drive - Motor power: 5.5 kW - Oil tank: 200 l - Return force: 6.3 t ==== Control & Features - Positioning accuracy: ± 0.5 mm - Adjustable hold time: 0 – 10 s (in 0.1 s increments) - Pressing pressure adjustable via control system - Switch-over between manual and automatic mode via key switch - Two-hand operation for safety - Sensor-based position control (top dead center, bottom dead center, switching point) ==== Operating Modes - Manual setup mode with stop at any point - Bending mode via two-hand control - Automatic mode for closed-tool operations - Optional use for punching, notching, and bending ===== Forging operations, forming technology, bending processes, punching, notching, small batch production, tool making Single column press, C-frame press, forging press, hydraulic press, industrial press, bending press, tool tryout press, tryout press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety guideline NR 12, which builds upon these. Our main strengths are in custom machine building and press automation. We offer customized hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses are predominantly equipped with components from leading European manufacturers.

Būklė: geras (naudotas), Gamybos metai: 1994, Parduodama hidraulinė presas, gamintojas Lauffer Pressen. Techniniai duomenys: Gamintojas: Lauffer Pressen GmbH & Co. KG Tipas: VSK 0125 Gamybos metai: 1994 Mašinos numeris: 10248/14292 Valdymas: konvencinis Būklė: naudota, veikianti Pritaikymo sritis: spaudimo, formavimo ir deformavimo darbai Įranga - Hidraulinis presas - Valdymo pultas su indikatoriais ir valdymu - Saugus valdymas - Masivi plieninė konstrukcija Iaodpfey Ufqkox Alrsu Įrenginys iš veikiančios gamybos, naudotas, su įprastais amžių atitinkančiais eksploatavimo žymėmis. Apžiūrėti galima susitarus iš anksto.

Būklė: naudotas, Gamybos metai: 1992, HYDRAP tipas HPSKZ 63t / 20t Slėgis: 63t Iaodpsw R Aamefx Alreu Apatinio stalo matmenys: 700x700 mm Viršutinio stalo matmenys: 600x600 mm Smūgio ilgis: 600 mm Atvira erdvė: 800 mm Pagalvėlė: 20t

Būklė: labai geros būklės (naudotas), Spaudimas: 16 t Mašinos svoris: apie 16 t Aprašymas netrukus! Iedpfx Aleyrhmhoroau

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 40 t, eigos ilgis: 250 mm, stalo plotis: 700 mm, stalo ilgis: 450 mm, gerklės gylis: 230 mm, įrengimo aukštis: 400 mm, NAUJA EXNER C-rėmo presas EEX SLL 40 Standard Line LIGHT Iodpfx Alsw Nx Nhsrsau Pagaminimo metai: 2025 Presavimo jėga: 400 kN Įrengimo aukštis: 400/450 mm Eiga: 250 mm Stalas (plotis): 700 mm Stalas (gylis): 450 mm Iškyša: 230 mm

Būklė: geras (naudotas), Gamybos metai: 1995, For sale: Hydraulic press PYE-63S The price listed in the advertisement is the net amount, to which VAT must be added. Ijdpfx Asv Uxttolrsau

Būklė: geras (naudotas), Gamybos metai: 1981, mašinos/transporto priemonės numeris: 055-014-19, Pasiūlymas 25275 Techniniai duomenys: - Maks. presavimo jėga: 25 t - Maks. stūmoklio eiga: 500 mm - Eigos greitis: 200 mm/s - Grįžimo greitis: 450 mm/s - Montavimo aukštis: 800 mm - Atstumas iki stūmoklio centro: 380 mm - Stūmoklio spaudimo paviršius: 440 x 360 mm Iajdpfxoy Ew Szo Alrju - Stūmoklio fiksavimo kaištis: 40 mm - Stalo dydis: 630 x 500 mm - Stalo skylė / pramušimas: 180 mm - Elektrinis kojinis jungiklis - Dvigubas valdymo pultas - Pavara: 400 V / 12,5 kW - Užimama vieta (apytiksliai): P 800 x A 2750 x G 1150 mm - Svoris (apytiksliai): 2200 kg

Būklė: geras (naudotas), Gamybos metai: 1982, mašinos/transporto priemonės numeris: 055-013-15, Pasiūlymas 25274 Techniniai duomenys: - didžiausia preso jėga: 25 t - didžiausias štampo eiga: 500 mm - eigos greitis: 200 mm/sek - grįžtamoji eiga: 450 mm/sek - įrengimo aukštis: 800 mm - išsikišimas iki štampo centro: 380 mm - štampo tvirtinimo paviršius: 440 x 360 mm - štampo tvirtinimo kaištis: 40 mm - stalo dydis: 630 x 500 mm - stalo anga / perėjimas: 180 mm - tempimo pagalvė: 10 t - elektrinis pakojos pedalas - 2 rankinis valdymo pultas - pavara: 400 V / 12,5 kW - užimamas plotas apie: P 800 x A 2750 x G 1150 mm Iodpey Ewx Usfx Alreau - svoris apie: 2400 kg

Būklė: geras (naudotas), Gamybos metai: 1984, mašinos/transporto priemonės numeris: 054-008-212, Pasiūlymas 25272 Techniniai duomenys: - Didž. presavimo jėga: 25 t Iodpfsy Ewtrsx Alrjau - Didž. štampo eiga: 500 mm - Eigos greitis: 0 - 2,4 m/min - Grįžimas: 0 - 12 m/min - Montavimo aukštis: 800 mm - Išpjova iki štampo centro: 360 mm - Štampo tvirtinimo plotas: 440 x 360 mm - Štampo tvirtinimo kaištis: 40 mm - Stalo dydis: 630 x 500 mm - Stalo skylė / išpjova: 180 mm - El. kojinis jungiklis - 2 rankų valdymo pultas - Pavara: 400 V / 8,75 kW - Vietos poreikis apie: Pl. 800 x A 2750 x G 1150 mm - Svoris apie: 2000 kg

Būklė: geras (naudotas), Gamybos metai: 1998, Press force: 315.00 t Stroke: 500 mm Isdpfx Ajv Rwu Ujlrsau Throat depth: 425 mm Daylight (Stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Downward speed: 48 mm/s Upward speed: 330 mm/s Working speed: 19 mm/s Oil capacity: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Overall dimensions (W x D x H): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE regulations. Equipped with oil-hydraulic drive, pressure-, time- and stroke-dependent control, front light barrier (Sick), two-hand operation.

Būklė: geras (naudotas), Gamybos metai: 2014, tūrio srautas: 1 570 m³/val, Becker Variair Vacuum Pump RV 2.1944/10 Iedpfx Aljv Anv Tjrjau Relative pressure: +410 mbar Volumetric flow rate: 1570 m³/h Weight: 60 kg + 21 kg inverter

Būklė: naujas, Gamybos metai: 2026, galia: 15 kW (20,39 AG), spaudimo jėga: 80 t, eigos ilgis: 600 mm, stalo plotis: 600 mm, stalo ilgis: 800 mm, gerklės gylis: 300 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, 80 Ton C-Frame Hydraulic Press – CHCP 80 – New / 24-Month Warranty Hydraulic presses are industrial machines that deliver high force and precision for metal forming, drawing, cutting, and assembly applications. The CHCP 80 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, ensures reliable performance in medium and heavy-duty applications with its robust frame, high capacity, and precision operation. Key Advantages - Rigid, vibration-free steel construction frame - High precision (≤120 micron/meter) - User-friendly PLC-controlled system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life and low maintenance cost Areas of Application - Metal forming - Deep drawing and forming processes - Cutting and punching operations - Assembly and pressing processes - Automotive and related industries Standard Features - Stress-relieved steel frame by vibration method - PLC control and touch panel - Argon welding applications - Welds certified to EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and perpendicularity tolerance compliant with ISO & DIN standards (≤ 120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 80 - Pressing Force: 80 Ton - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 600 x 800 mm - Press Depth: 1200 mm - Press Width: 600 mm - Table Height from Floor: 900 mm - Total Height: 2600 mm - Main Cylinder Diameter: Ø200 mm - Motor Power: 15 kW - Weight: 6500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 months - Condition: New and unused Iajdpoyzb Dtofx Alrju This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2026, galia: 15 kW (20,39 AG), spaudimo jėga: 100 t, eigos ilgis: 600 mm, stalo plotis: 650 mm, stalo ilgis: 850 mm, gerklės gylis: 300 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, 100 Ton C-Frame Hydraulic Press – CHCP 100 – New / 24-Month Warranty Hydraulic presses are industrial machines that offer high force and precision in metal forming, deep drawing, cutting, and assembly operations. The CHCP 100 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for heavy-duty production applications, featuring high tonnage capacity, robust frame construction, and precise operational capabilities. Key Advantages - Rigid, vibration-free steel frame construction - High precision (≤120 microns/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long lifespan and low maintenance cost Applications - Metal forming - Deep drawing and stamping operations - Cutting and punching operations - Assembly and pressing operations - Automotive and ancillary industries Standard Features - Stress-relieved steel frame construction by vibration method - PLC control with touch panel - Argon welding applications - Welding certified to EN ISO 15614-1 / 2017 (WPQR & WPS approved) Iaodpfsyzb Dyox Alrsu - Parallelism and squareness in accordance with ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 100 - Press Force: 100 Ton - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 650 x 850 mm - Press Depth: 1300 mm - Press Width: 650 mm - Table Height from Floor: 900 mm - Total Height: 2700 mm - Main Cylinder Diameter: Ø220 mm - Motor Power: 15 kW - Weight: 8500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 Months - Condition: Brand new and unused This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2026, galia: 5,5 kW (7,48 AG), spaudimo jėga: 40 t, eigos ilgis: 500 mm, stalo plotis: 500 mm, stalo ilgis: 600 mm, gerklės gylis: 250 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, 40 Ton C-Frame Hydraulic Press – CHCP 40 – New / 24 Months Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, deep drawing, cutting, and assembly processes. The CRONOSSTECH CHCP 40 C-Frame Hydraulic Press delivers reliable performance in both workshops and production lines, thanks to its compact design, robust frame, and precise operation capabilities. Key Advantages - Rigid, vibration-free frame construction - High precision (≤120 microns/meter) - PLC-controlled user-friendly system - Hydraulic and electrical components to European standards - Long service life and low maintenance cost Applications - Metal forming - Deep drawing and flanging - Cutting and punching operations - Assembly and pressing tasks - Automotive and related industries Standard Features - Stress-relieved steel frame via vibration method - PLC control with touchscreen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerance according to ISO & DIN standards (≤120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Dual hand control system - Cooling system Technical Specifications – CHCP 40 - Pressing Force: 40 Ton - Stroke: 500 mm - Throat Depth: 250 mm - Table – Ram Distance: 600 mm - Table Size: 500 x 600 mm - Press Depth: 1050 mm - Press Width: 500 mm - Table Height from Floor: 850 mm - Total Height: 2400 mm - Main Cylinder Diameter: Ø145 mm Iaodpfx Aeyzb Dgjlrju - Motor Power: 5.5 kW - Weight: 4500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured in Turkey by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2026, galia: 22 kW (29,91 AG), spaudimo jėga: 200 t, eigos ilgis: 800 mm, stalo plotis: 750 mm, stalo ilgis: 1 000 mm, gerklės gylis: 400 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, 200 Ton C-Frame Hydraulic Press – CHCP 200 – New / 24-Month Warranty Hydraulic presses are industrial machines delivering high force and precision for metal forming, deep drawing, cutting, and assembly applications. The CHCP 200 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for demanding production environments with its high tonnage capacity, reinforced heavy-duty body, and superior performance. Key Advantages - Heavy-duty, high-strength steel construction frame - Stable operation with vibration-free design - High precision (≤120 micron/metre) - User-friendly PLC controlled system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life and low maintenance cost Areas of Application - Heavy-duty metal forming - Deep drawing and sheet metal forming operations - High-tonnage die pressing - Cutting and punching operations - Automotive, defense, and heavy industry Standard Features - Stress-relieved, welded steel frame Iaedpfx Aeyzb Edjlreu - PLC control with touch panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances in accordance with ISO & DIN standards (≤ 120 micron/metre) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 200 Press Force: 200 Tons Stroke: 800 mm Throat Depth: 400 mm Table – Ram Distance: 900 mm Table Size: 750 x 1000 mm Press Depth: 1500 mm Press Width: 750 mm Table Height from Floor: 1000 mm Total Height: 2900 mm Main Cylinder Diameter: Ø300 mm Motor Power: 22 kW Weight: 11,500 kg General Information Place of Manufacture: Turkey Warranty: 24 Months Condition: New and Unused This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2026, galia: 18,5 kW (25,15 AG), spaudimo jėga: 150 t, eigos ilgis: 700 mm, stalo plotis: 700 mm, stalo ilgis: 1 000 mm, gerklės gylis: 350 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, 150 Ton C-Frame Hydraulic Press – CHCP 150 – New / 24 Months Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, drawing, cutting, and assembly operations. The CHCP 150 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for heavy industry and continuous production applications, featuring high tonnage capacity, reinforced frame structure, and precise operating performance. Key Advantages - High-strength, vibration-free steel construction frame - High precision (≤120 microns/meter) - User-friendly PLC-controlled system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Heavy-duty, industrial-grade design - Long service life and low maintenance costs Applications - Heavy-duty metal forming - Deep drawing and forming operations - Die pressing applications - Cutting and punching operations - Automotive and auxiliary industries Standard Features - Stress-relieved, steel weldment frame using vibration method - PLC control and touch panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerance in accordance with ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 150 - Press Capacity: 150 Ton - Stroke: 700 mm - Throat Depth: 350 mm - Table – Ram Clearance: 800 mm - Table Size: 700 x 1000 mm - Press Depth: 1400 mm - Press Width: 700 mm - Table Height from Ground: 950 mm - Overall Height: 2800 mm - Main Cylinder Diameter: Ø250 mm - Motor Power: 18.5 kW - Weight: 10,500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 Months - Condition: Brand new, unused Iaodpfxeyzb D Hj Alreu This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2026, galia: 7,5 kW (10,20 AG), spaudimo jėga: 60 t, eigos ilgis: 500 mm, stalo plotis: 600 mm, stalo ilgis: 800 mm, gerklės gylis: 250 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, 60 Ton C-Frame Hydraulic Press – CHCP 60 – New / 24 Months Warranty Hydraulic presses are industrial machines that deliver high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 60 C-Frame Hydraulic Press manufactured by CRONOSSTECH provides reliable and stable performance for both workshops and production lines, thanks to its compact structure, robust frame, and precise operational capabilities. Key Advantages: - Rigid, vibration-free frame construction - High precision (≤120 microns/metre) - User-friendly PLC controlled system - Hydraulic and electrical components compliant with European standards - Long service life and low maintenance costs Applications: - Metal forming - Deep drawing and forming operations - Cutting and punching operations - Assembly and pressing processes - Automotive and sub-industry sectors Standard Features: - Stress-relieved welded steel construction by vibration method - PLC control with touch panel - Argon welding applications - Certified welding to EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and perpendicularity tolerance according to ISO & DIN standards (≤120 microns/m) - PARKER or REXROTH hydraulic system Ijdpfxjyzb Dme Alrjau - SIEMENS / SCHNEIDER electrical equipment - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 60: Pressing Force: 60 Ton Stroke: 500 mm Throat Depth: 250 mm Table–Ram Distance: 600 mm Table Size: 600 x 800 mm Press Depth: 1150 mm Press Width: 500 mm Table Height from Floor: 850 mm Total Height: 2500 mm Main Cylinder Diameter: Ø175 mm Motor Power: 7.5 kW Weight: 5500 kg General Information Country of Origin: Turkey Warranty: 24 Months Condition: Brand new and unused This machine is manufactured by CRONOSSTECH in Turkey.