Varikliu valdomos lankstymo staklės, lakšto storis 6,1-14 mm pirkti naudotą (132)

Būklė: naujas, Ostas 3-Roll Plate Rolling Machine SMR-S 1070 x 130 Technical Specifications: Special features included in the price: - Hardened rollers - Motorized rear roll adjustment - Digital display - Sheet width: 1070 mm - Maximum sheet thickness: 7.0 mm - Pre-bending sheet thickness: 6.0 mm - Roller length: 1070 mm - Minimum bending diameter: 195 mm - Roller diameter: 130 mm - Weight: 1150 kg - Dimensions (L x W x H): 2550 x 630 x 1020 mm - Motor: 3.75 kW Equipment: Ndsdeiw D Dxepfx Af Hja - Electrically driven top and bottom rolls - Swing-out top roll - Cone bending device - Asymmetric roll arrangement - Self-braking main motor - Separate control and operation panel - Safety cable, CE marking Values are valid for St-37 / 240 N/mm²

Būklė: naujas, - Capacity: 1070 x 8 mm - Electrically adjustable rear roll - Electrically adjustable lower roll (material clamping) - Digital display for rear roll adjustment - Hardened rolls Ndjdegg N R Aopfx Af Hoa - Cone bending capability - Centralized lubrication system - Emergency stop - Documentation - Digital display for lower roll movement (material clamping) - Hardened rolls - Cone bending capability - Swiveling upper roll - Centralized lubrication system - Braking motor - Emergency stop - Documentation - 400V

Būklė: naujas, Condition: new Delivery time: approx. 2 weeks from order confirmation Country of origin: Italy Bending length: 2000 mm Max. bending capacity - mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Numerical control: Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclined lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous rolling and support movement Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for higher precision Infinitely variable roll movement speed Infinitely variable rotation speed Ndodjypbp Rjpfx Af Hja Prepared for retrofit of supports (up to 5 axes) Prepared for retrofit of loading/unloading stations Prepared for retrofit of CNC controls Extra-large, double-hinged drop-end bearing Electronic parallelism system for roll synchronization Hydraulic upper roll lifting (for models with top roll diameter from 205 mm) Double linear guidance for movement of lower rolls Ultra-wide roll blocks "MCS" bearing system for the lower rolls (4 large bearings on each shaft) Centralized lubrication system Pressure gauge for constant pinch roll monitoring Extra torque and special braking system Safety pull cord with emergency stop Equipped according to CE regulations OPTION: CNC control Siemens PSG-Absolute with 15" touchscreen (automatic sequence calculation for simple and complex shapes)

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 3, apatinio volelio skersmuo: 250 mm, viršutinio volo skersmuo: 250 mm, šoninio volelio skersmuo: 200 mm, vėjo ilgis: 3 100 mm, maks. lakšto storis: 9 mm, bendras svoris: 5 400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically operated up-down rear and bottom rolls Njdpjw Slbvefx Af Hsda Precision bending with braked main motor Conical bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear roll ball system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 pcs) Operation manual OPTIONAL EQUIPMENT Overhead crane for support in large-diameter rolling Hydraulic side supports for large-diameter rolling Ground and polished rolls Wire grooves on shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 3050 mm Pre-Bending: 5/7 mm Bending Capacity: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 liters Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Būklė: naujas, - Capacity: 1570 x 9 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for rear roller movement - Digital display for bottom roller movement (material clamping) - Hardened rolls - Conical rolling Ndsdpfx Ajg Ntlcef Hoa - Removable top roll - Central lubrication system - Brake motor - Emergency stop - Documentation - 400V

Būklė: naujas, Ostas 3-Roller Plate Rolling Machine SMR-S 2070 x 190 Nsdpfog Nz T Iex Af Hsda Technical Specifications: Special Equipment Included in the Price: - Motorized adjustment of lower rollers - Hardened rollers - Motorized adjustment of rear rollers - Digital display Sheet width: 2070 mm Max. sheet thickness: 7.0 mm Pre-bending sheet thickness: 6.0 mm Roll length: 2070 mm Smallest bending diameter: 285 mm Roll diameter: 190 mm Weight: 3480 kg Dimensions (L x W x H): 3750 x 920 x 1260 mm Motor power: 4 kW Equipment: - Electrically driven upper and lower rollers - Swing-out upper roller - Cone bending device - Asymmetrical roller arrangement - Self-braking main motor - Separate control and operating panel - Safety cable, CE mark

Būklė: naujas, Sheet width: 1000 mm Sheet thickness: 8.0 mm Nedpfefv H A Hex Af Heda Frame opening: 1070 mm Top roll diameter: 150 mm Pre-bending capacity: 6.0 mm Connected load: 4.0 kW Machine weight approx. 1.4 t Space requirement approx. 2.6 x 0.65 x 1.1 m Sheet bending machine with profile bending attachment - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital display for rear roller movement - Digital display for lower roll movement (material clamping) - Hardened rolls - Cone bending - Swing-out top roll - Brake motor - Emergency stop - Documentation in English - 400 V

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, Electronically controlled, hydraulic four-roll plate bending machine Manufacturer: FACCIN, Model 4 HEL/S 2122 Technical specifications: Number of rolls: Four Side roll geometry: Linear guides Working width: 2,000 mm Top roll diameter: 225 mm Bottom roll diameter: 215 mm Side roll diameter: 165 mm Pressing force against top roll: 100 tons Guaranteed installed power: 9.2 kW (12.5 HP) Guaranteed max. rotation speed: 4–8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500 mm Width: 1,200 mm Height: 1,100 mm Guaranteed performance: For material with yield strength 260 N/mm² Rolling capacity (full working width): 11 mm Pre-bending capacity (full working width): 8 mm from pipe diameter 1,100 mm Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm from pipe diameter 286 mm Standard features: Nedpfx Aod Eqg Hof Hoda Double linear guide system for roll movement Extra-wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double-anchored swing-out bearing Electronic Parallelism System (EPS) Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulic and electrical package Emergency stop safety cable with CE certification Centralized lubrication Cone bending device Included optional equipment: CNC control PGS-ABSOLUTE

Būklė: naujas, Sheet width: 1570 mm Sheet thickness: 10 mm Pre-bending: 8 mm Total power requirement: 7 kW Machine weight: approx. 4.5 t Nsdpfx Ajvkixxsf Hsda Space requirement: approx. 3.5 x 1.5 x 1.55 m – 4 rolls – Capacity: 1570 x 10 – Pre-bending: 8 mm – Hardened rolls – Upper roll diameter: 220 mm – Lower roll diameter: 220 mm – Side roll diameter: 180 mm – Hydraulic – Digital display for left roll movement – Digital display for middle lower roll movement – Digital display for right roll movement – Top roll hydraulically swing-out – Steel construction ST-52 – Hydraulic drop-end for easy roll positioning – Hydraulic up/down movement system with middle and side rolls – Hydraulic balancing system – Overvoltage protection – Documentation – 400V

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, EVO – tai naujausias skardos apdirbimo įrenginys. Jame įdiegta daugybė naujoviškų ir patentuotų funkcijų, kurios padidina jūsų gamybos pajėgumus ir našumą, kartu užtikrinant mažiausias bendras eksploatavimo išlaidas. Aukštos kokybės komponentai, naudojami šiame įrenginyje, ir naujausia BENDtronic® valdymo sistemos versija, įdiegta visuose EVO įrenginiuose, yra ypač svarbūs privalumai. HAEUSLER EVO 21015 – 4 ritinių apvalausis lenkimo įrenginys / ritininis lenkimo įrenginys Gamintojas: Haeusler Tipas: EVO 21015 – 4 ritinių apvalausis lenkimo įrenginys / ritininis lenkimo įrenginys Šalis: Vokietija / Šveicarija Būklė: NAUJAS, ekspozicinis įrenginys Pristatymo laikas: 12–14 savaitės Techniniai duomenys: Darbinis plotis: 2100 mm Apvalausis lenkimo pajėgumas: 12 mm Lenkimo pajėgumas: 9 mm Standartinė komplektacija: • Kintamas šoninių ritinių svyravimo reguliavimas (VSA®) • HAEUSLER hibridinė pavaros sistema (HHDS®) • Judrus 21,5" jutiklinis valdymo skydelis su pažangia BENDtronic® valdymo sistema • Be pakopų reguliuojamas sukimosi greitis nuo 0 iki 8 m/min • Įrenginys paruoštas nuotolinei priežiūrai • Elektromechaninė fiksavimo sistema, skirta viršutiniam ritiniui sukti • Automatinis apatinio ritinio slėgio reguliavimas • Automatinis apatinių ritinių cilindrų slėgio reguliavimas. Standartinė aušinimo sistema, skirta aplinkos temperatūrai iki 35 °C • Automatinė ašių optimizacija • Automatinis hidraulinės sistemos išjungimas, kai ritiniai yra nustatytoje padėtyje • Itin kompaktiškas dizainas, skirtas sumažinti arba net išvengti pagrindo išlaidų • Avarinis sustabdymo trosas Papildoma įranga (už papildomą kainą): • Dviejų ritinių pavara viršutiniam ir apatiniam ritiniams • Kūginio lenkimo įtaisas, skirtas lenkti kūgine forma pagamintoms detalėms • Išplėsta aušinimo sistema, skirta aplinkos temperatūrai iki 45 °C • Viršutinė atrama, palengvinanti didelio skersmens detalių lenkimą • Šoninė atrama, padedanti lenkti didelio skersmens detales Nodpfx Aexnnf Ief Heda • Dujų slėgio akumuliatorius, skirtas jau suvirintiems cilindrams kalibruoti • BendIT-Office darbo vietos programinė įranga • Automatinis lenkimas • Įrenginys paruoštas greitai keisti viršutinius ritinius • Keičiami viršutiniai ritiniai, skirti lenkti mažo skersmens detales • Grūdinti ritiniai, jei reikia lenkti juodąjį ir nerūdijantį metalą • Įvadinis ritininis takas, skirtas lengvai tiekti skardą į įrenginį • Centravimo įtaisas įvadiniam ritininiam takui, skirtas automatiškai centruoti skardą prieš lenkimą Ar netinkamas įrenginys? Kaip „Haeusler“ atstovas, galime paruošti ir pasiūlyti jums pageidaujamą įrenginį, atsižvelgdami į jūsų poreikius. Daugiau informacijos teiraukitės.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, volelio skersmuo: 200 mm, vėjo ilgis: 2 000 mm, darbinis plotis: 2 000 mm, plieno lakšto storis (maks.): 8 mm, įvesties srovės tipas: trifazis, darbinis ilgis: 2 000 mm, Hydraulically Controlled Four-Roller Plate Rolling Machine Manufacturer: BIKO, Model: B4 2020 Technical Specifications: Number of rollers: Four Side roller geometry: Linear guides Working width: 2000 mm Top roller diameter: 200 mm Lower roller diameter: 180 mm Side roller diameter: 160 mm Nsdpjd Iclrsfx Af Heda Rated installed power: 5.4 kW Rated maximum rotation speed: 5 m/min Machine weight (guaranteed): 3,950 kg Length: 3,200 mm Width: 1,000 mm Height: 1,100 mm Guaranteed Performance: For material with a yield strength of 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm Starting from pipe diameter: 1,000 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 4 mm Starting from pipe diameter: 265 mm Standard Equipment: Linear guide system for roller movement Extra-wide bearing blocks Needle bearing for roller rotation Extra heavy-duty, double-supported swing-out bearing Hardened rollers for high wear resistance Hydraulic parallelism system for side rollers Digital display for side roller and lower roller positioning Cone bending device Control via swiveling operator panel Safety trip wire with emergency stop and CE certification

Būklė: naujas, Condition: New Delivery time approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2050 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness with pre-bending (mild steel): 10 mm Max. sheet thickness without pre-bending at D = 5x top roll: 13 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D = 5x top roll: 10 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3830 mm Width: 1160 mm Height: 1200 mm Weight: 5000 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gears Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Nodpfeypbqbex Af Hjda Configuration according to CE regulations OPTIONS: Upper and lateral sheet supports NC control system IMPORTANT POINTS FOR CONE BENDING: The maximum sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – steel: 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 8 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 6 mm Max. sheet thickness with pre-bending at D=5x top roll: 6 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg Ndjdpsypbqnsfx Af Hoa Features: - 4 rolls - PLC - Fully hydraulic drive for top and bottom rollers (for all four rollers from 30 mm bending capacity) via planetary gearbox - Hydraulic adjustment of side rolls with electronic synchronization - Hydraulic adjustment of bottom roll with mechanical synchronization - Adjustable clamping pressure - Variable rolling speed - Hardened rolls - Cone bending device - Hydraulic drop-end - Mobile control console - Overload protection - Operating manual in GERMAN and ENGLISH - Equipment in accordance with CE regulations OPTIONS: - Upper and side sheet supports - NC control IMPORTANT NOTES ON CONE ROLLING: - Max. sheet thickness is 50% of nominal capacity - Cone length must be max. 30% or more than 60% of roll length - Hardened rolls recommended

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, Hydraulically operated three-roll plate bending machine Manufacturer: FACCIN, Model 3HEP 2021 Technical specifications: Number of rolls: Three Side roll geometry: Linear guides Working width: 2000 mm Top roll diameter: 215 mm Side roll diameter: 195 mm Guaranteed installed power: 7.2 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 3,000 kg Length: 3,700 mm Width: 1,000 mm Ndsdpfocuxp Tex Af Hja Height: 1,100 mm Guaranteed performance: For material with yield strength of 260 N/mm² Rolling capacity (full working width): 13 mm Pre-bending capacity (full working width): 9 mm From pipe diameter: 1,075 mm Rolling capacity (full working width): 9 mm Pre-bending capacity (full working width): 7 mm From pipe diameter: 280 mm Standard equipment: Double linear guide system for roll movement Extremely wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double-supported folding bearing Hardened rolls for increased wear resistance Hydraulic parallelism system for side rolls Digital readout for side roll position Cone bending device Control via swiveling operator panel Safety trip wire with emergency stop and CE certification Mobile operator console

Būklė: naujas, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2550 mm Max. bending capacity – mild steel: 15 mm Max. sheet thickness without pre-bending at D=5x upper roll: 15 mm Max. sheet thickness without pre-bending at D=3x upper roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x upper roll: 12 mm Max. sheet thickness with pre-bending at D=5x upper rolls: 12 mm Max. sheet thickness with pre-bending at D=1.5x upper roll: 10 mm Nedpfx Afeypbp De Hsda Upper roll diameter: 270 mm Lower roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1155 mm Motor power: 15 kW Length: 4760 mm Width: 1660 mm Height: 1155 mm Weight: 8,950 kg 4 rolls PLC Fully hydraulic drive of upper and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side sheet supports NC control IMPORTANT POINTS WHEN CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity – structural steel: 25 mm Max. sheet thickness without prebending at D=5x top roll: 25 mm Max. sheet thickness without prebending at D=3x top roll: 20 mm Max. sheet thickness without prebending at D=1.5x top roll: 20 mm Max. sheet thickness with prebending at D=5x top roll: 20 mm Max. sheet thickness with prebending at D=1.5x top roll: 16 mm Top roll diameter: 360 mm Bottom roll diameter: 360 mm Side roll diameter: 270 mm Maximum opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg Ndedpfx Ajypbqusf Hsa 4 rolls PLC Fully hydraulic drive of the top and bottom roll (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control console Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and lateral sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €95,000 Lease rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without prebending (mild steel): 12 mm Max. sheet thickness with prebending (mild steel): 8 mm Max. sheet thickness without prebending at D=5x top roll: 13 mm Max. sheet thickness without prebending at D=1.5x top roll: 10 mm Max. sheet thickness with prebending at D=5x top roll: 10 mm Max. sheet thickness with prebending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg Nedpfx Afjypbqhe Hsda 4 rolls PLC Fully hydraulic drive for top and bottom roll (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Device for conical bending Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum sheet thickness is 50% of nominal capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Bending length: 3100 mm Sheet thickness: 8 mm Nodpjd Ab Tgefx Af Hoda Upper roller diameter: 230 mm Technical specifications: - Hardened and polished rolls - Complete frame made from ST-52 steel - Conical bending device - Digital display for side rollers - Portable control panel - Rolls mounted with bearings - Upper roll cover, hydraulically openable and closable via control panel - All rolls are driven by hydraulic motor and planetary gearbox - Lateral movements powered hydraulically Options: - Variable rotation speed EUR 4,682 - Material feed table on request - Oil cooler EUR 1,040 - Central support EUR 8,250 - Side supports EUR 7,070 We have a large number of references!

Būklė: naudotas, Arbeitslänge: 5.500 mm Blechstärke: 13 mm Ndsdpfx Afs Dvlie Hsa Technische Merkmale: * 3-Walzen-Betrieb * Oberwalzendurchmesser: Ø 500 mm * Seitenwalzendurchmesser: Ø 300 mm (jeweils) * Hydraulische Halter links/rechts * Hydraulischer Hubturm * Hydraulische Vorbiegung

Būklė: naujas, Sheet thickness: 8 Bending length: 3100 Upper roll diameter: 230 Technical Specifications: Technical Data Maximum sheet thickness: 8 mm (5/16") Pre-bending thickness: 6 mm (1/4") Minimum bending diameter (with upper roll diameter = URD): URD × 3 Working length: 3,100 mm (10 ft) Motor power: 7.5 kW (10.1 HP) Number of rolls: 4 Roll dimensions Upper roll diameter: 230 mm (9.1") Lower roll diameter: 210 mm (8.3") Ndedsd Ab Sajpfx Af Hea Side roll diameter: 190 mm (7.5") Machine dimensions Length: 5,200 mm (17.1 ft) Height: 1,300 mm (4.3 ft) Width: 1,400 mm (4.6 ft) Weight: 5,830 kg (12,853 lbs) - Hardened and polished rolls - Complete machine frame made of ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulically driven top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Upper and lower rolls driven by hydraulic system and gearbox - Vertical movements of the lower roll are hydraulically driven - Movable control console - Complies with CE standards Options: - Variable rotation speed EUR 4,681 - Material feed table EUR 3,400 - Oil cooler EUR 1,040 - Center support EUR 8,250 - Side supports EUR 7,070 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for specific customer requirements) We have many references!

Būklė: naujas, Bending length: 2100 mm Sheet thickness: 8 mm Top roll diameter: 200 mm Technical specifications: - Rear roll motorized - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gears in the gearbox - Portable control panel - Compliant with CE standards Nodpfx Ajd Ab Nhof Hjda Options: - Bottom roll driven by electric motor EURO 2,200 - Digital display for rear roll position EURO 1,010 - Extended rolls EURO 966 - Profile rolls EURO 1,190 We have numerous references!

Būklė: naujas, Sheet thickness: 10 Bending length: 3100 mm Top roll diameter: 270 mm Dimensions (LxWxH): 5600 x 1450 x 1600 mm Pre-bending: 8 mm Motor: 11 kW Lower roll diameter: 250 mm Side roll: 210 mm Technical data: - Hardened and polished rolls - Complete frame made from ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulically driven top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically driven - Mobile control panel - In compliance with CE standards Options: Ndedpfx Afsd Ab R Sj Hja Description Qty Net price (€) Heating + cooling 1 1,477 € Continuously variable speed 1 3,323 € Material feeding table 1000 × 2000 – 1 pc. 1 2,414 € Central support 1 5,857 € Preparation for central support 1 888 € Side supports left and right 1 5,020 € Preparation for side support (instead of standard) 1 923 € CNC-CS6 control system 1 18,200 € NC-CS6 control system 1 7,721 € Ejection system 1 13,020 €

Būklė: naujas, Sheet width: 2000 mm Sheet thickness: 8 mm Nedpfx Ajfv H A Rof Heda Bending Total power requirement: 7.5 kW Machine weight: approx. 3.6 t Space requirement: approx. 3600 x 1250 x 1350 mm

Būklė: naujas, Lankstymo ilgis: 1600 mm, Lakšto storis: 8 mm, Viršutinio volo skersmuo: 170 mm Techniniai duomenys: - Atgalinis volas varomas varikliu - Kūginio lankstymo įtaisas - Grūdinti ir poliruoti volai - Visa konstrukcija pagaminta iš St 52 plieno - Asimetrinis dizainas tobulam lankstymui - Viršutinis ir apatinis volai varomi stabdžiu elektros varikliais ir planetiniais pavarų dėžės reduktoriais - Nešiojamas valdymo pultas - Atitinka CE standartus Parinktys: - Apatinis volas varomas elektros varikliu: 1 650 EUR - Skaitmeninis displėjus atgalinio volo padėties rodymui: 1 010 EUR - Pratęsti volai: 966 EUR - Profilių volai: 1 190 EUR Nsdpjd Ab Nqefx Af Hoda Turime labai daug rekomendacijų!

Būklė: naujas, Sheet thickness: 13 mm Bending length: 3100 mm Top roller diameter: 300 mm Technical specifications: Ndedpfxsd Ab R Hs Af Hja - Hardened and polished rollers - Full body constructed from ST-52 steel - The 4 rollers are arranged symmetrically - Hydraulically powered top cover for easy material removal - Digital display for lower and side roller positions - Hydraulic adjustment - Top and bottom rollers powered by hydraulics and gearbox - Vertical movement of the lower roller is hydraulically driven - Mobile control panel - Compliant with CE standards Options: - Variable rotation speed: EURO 4,681 - Material feed table: EURO 3,400 - Oil cooler: EURO 1,040 - Central support: EURO 13,600 - Side supports: EURO 9,400 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roller - Adjustable lower roller support system (for special customer requirements) We have numerous references!