4 ritinių lakštų valcavimo mašinos su hidrauline pavara

KK-Industries CY4R-HHS 270-30/10

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, ALZMETALL AX 4 / SV Column Drilling Machine 3KW Manufacturer: Alzmetall Model: AX 4 / SV Condition: NEW Year of Manufacture: 2025 Drilling Capacity (Steel E335 / St 60): 55 mm Thread Cutting Steel E335 (St 60) M 42 Cast Iron EN-GJL-200 M 56 Short Spindle MK 4 Spindle Stroke: 140 mm Usable Throat: 300 mm Column Diameter: 145 mm Machine Table, Usable Area: 615 x 430 mm Spindle-to-Table Distance min./max.: 150 / 735 mm T-slots (number x width x pitch): 2 x 14 x 224 mm Feed: 0.1 + 0.3 mm/rev Machine Height approx. 1850 mm Net Weight approx. 380 kg Infinitely Variable Drive Motor Speed: 1500 rpm Power: 3.0 kW Spindle Speed (rpm): 70–2400 Standard Equipment: - Main switch with lockable motor protection circuit breaker - Mushroom-head pushbutton (locking) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle guard with electrical interlock - Paint finish: DD textured paint Signal White RAL 9003, PANTONE 7545c, black - Machine oil: first fill; supplied in loose container Available Options: - LED machine light - Thread cutting device with soft start (from 2025) - Coolant system in base - Digital drilling depth display Fpsdpfsy S Axgox Abrop - Fine drilling depth adjustment: 0.1 mm

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, spalva: balta, bendras svoris: 16 000 kg, didžiausias leistinas svoris: 12 720 kg, tuščias svoris: 3 280 kg, krovinio erdvės tūris: 50 m³, krovinių skyriaus plotis: 2 480 mm, krovimo vietos ilgis: 7 250 mm, krovos erdvės aukštis: 2 750 mm, konteinerio ilgis: 24 pėda,

Gamybos metai: 2002, būklė: geras (naudotas), mašinos/transporto priemonės numeris: RHKBK250KG, DEMAG KBK Overhead Crane System, Crane Runway, approx. 6x5 m Load capacity / Lifting capacity: 250 KG - 0.25 t Technical specifications of the system: Crane runway made of Demag KBK2 rails System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable trolley system, brackets/suspenders, etc. Including Demag DK 250 KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 rails kept in stock! Fpjdpfx Aorft Nhsbrsp Other KBK systems available as well. Load capacity 125 KG - 1600 KG Please inquire about your custom crane runway with required load capacity and dimensions, non-binding.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 8 025 mm, bendras plotis: 3 405 mm, bendras ilgis: 2 810 mm, keliamoji galia vienai sandėliavimo sekcijai: 250 kg, statybinis aukštis: 50 mm, garantijos trukmė: 12 mėnesiai, Įranga: apsaugos šviesos užtvara, Valdymas pagal lentelės išankstinį pasirinkimą su prekių valdymu. Įrenginys iš liftų komplekso. Šoninės šachtos apdailos pagamintos naujai. Nėra šoninių prieigos durų. Turime 4 įrenginius. Mašinos aukštis reguliuojamas. Sandėlio liftas su pristatymu, montavimu, DGUV priėmimu ir garantija. Fjdsw S Udyspfx Abropp

Gamybos metai: 2022, būklė: naujas, The robot belt grinding machine is a belt grinding machine designed for robotic processing, equipped with a contact wheel for grinding parts made of aluminum, steel, brass, and zinc die-cast. Technical data: Contact wheel: max. Ø 400 mm Abrasive belt length: 3500 mm Abrasive belt width: max. 150 mm Extraction connection: Ø 160 mm Dimensions (LxWxH): 900 x 700 x 1800 mm Weight: approx. 350 kg Electrical connection: 3 x 400 V, 4 kW Compressed air connection: 6 - 8 bar Fjdpogxug Ejfx Abrspp Noise level: > 85 dB(A) Spindle diameter: 35 mm Belt grinding unit for abrasive belts max. 150 mm x 3500 mm length with pneumatic belt tensioning, belt break monitoring, 4 kW drive power, frequency-controlled, for contact wheels max. diameter 350 mm x 150 mm, drive and deflection rollers. Equipped with top roller for slack belt grinding.

Būklė: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Cutting capacity at 45 degrees: round 550 mm Cutting capacity at 45 degrees: square 550 mm Cutting capacity at 45 degrees: flat 550 x 600 mm Cutting capacity at 60 degrees: round 370 mm Cutting capacity at 60 degrees: square 370 mm Cutting capacity at 60 degrees: flat 370 x 600 / 450 mm Saw blade length: 7260 x 41 x 1.3 mm Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.8 t Space requirement: approx. 5.85 x 3.7 x 2.7 m 2-column double mitre bandsaw for fast cutting, equipped with pusher system P15. Option: P30. Hydraulic saw frame lowering: • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system." An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor, combined with a reliable hydraulic brake via large-radial central positioning. Fpjdpsfg E Hmsfx Abrep The worktable runs on high-quality preloaded bearings, ensuring exceptionally smooth rotation. CNC control: A CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. Double-sided gripping positioning system: The B&S pusher, feed, and positioning system is equipped with "double-sided opening grippers" which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal form. The pusher system is built as a separate unit and runs on ball-bearing linear guides, precision ground rack, and is driven by a frequency-controlled, robust gear motor.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, CLEANROOM – ISO 8 | Requirements for Cleanroom ISO Class 8 | ISO 8 Cleanroom Classification | To achieve ISO 8 air cleanliness class in a cleanroom, a multi-stage air filtration system is typically used (e.g., pre-filter G4, F9 filter, final H13 filter). Airflow in the room is non-unidirectional, with "clean" air supplied to the room mixing with the "dirty" air already present. Exhaust grilles in ISO 8 rooms are placed on the walls. The required number of air changes per hour depends on the type of activity conducted and the number of personnel present; typically, the goal is to ensure 10–40 air changes per hour. In ISO 8 class, personnel often remain in the room continuously. Staff may wear standard workwear, while visitors wear disposable lab coats. It is recommended to maintain a minimum positive room pressure relative to the adjacent zone at 5–10 Pa. Requirements for devices and materials intended for use in ISO 8 air cleanliness class cleanrooms (maximum average number of particles released, assuming: 100 samples taken; measurement performed in accordance with ISO 14644-14 in at least one class cleaner than the intended class; particles/m3). Detailed descriptions are provided in the photos. Technical drawings are attached in the photos. Ventilation Description The purpose of the installed ventilation system was to achieve the following air parameters in the cleanroom. The enclosure was built using the GBD PHARMA 2000 system, complying with all requirements for "clean rooms" in the highest air cleanliness classes. Installation parameters: a) Air cleanliness – ISO 8. b) Temperature: 19–23°C. c) Humidity: max 38%. a. To ensure the required cleanliness of supplied air, a DOSPEL ventilation unit with a maximum capacity of V = 3500 m3/h [up to 15 air changes/hour] was used. The unit is equipped with pocket filters: pre-filter FK EU5/EC2 and fine filter FK-EU9/EC2. In addition, EUFILTER HEPA 11 filters were installed in the ceiling diffusers. Specifications are in item H6. As a result, at a measured throughput of 3264 m3/h, ISO 7 [Class “C”] cleanliness was achieved at rest, and ISO 8 [Class “D”] during operation. b. The temperature range 19–23°C is easily maintained by the upgraded cooling coil and chiller, even with a 25% share of fresh air. Fpjdpfjq H H Rusx Abrop c. To achieve proper cooling in summer conditions (ambient temperature approx. 30°C and humidity approx. 80%), a freon cooler with 31.4 kW capacity and a refrigerating unit of 33.5 kW cooling capacity were used. The chiller is manufactured by FUJITSU and supplied by Klimatherm Gdańsk. Room overpressure relative to external pressure is automatically controlled; pressure differential at the door: 15 Pa. The ventilation system automation allows an “economy” mode, where the installation operates in a closed loop and maintains 15 Pa overpressure. Technical data is attached in the photos.

Būklė: naudotas, Techninės detalės: Keliamoji galia: 1,0 t Išsikišimas: 3500 mm Sijos apačios aukštis: 3900 mm Strėlės ilgis nuo kolonos centro: 3750 mm Kėlimo aukštis aukščiausioje kablio padėtyje: 4000 mm Kolonos skersmuo: 400 mm Bendras galios poreikis: 0,76 kW Matmenys I x P x A (surinktas): 4,2 x 0,84 x 4,25 m Koloninis sukamasis kranas su nedidele aštuonkampe pėda 750 x 750 x 21 mm - Valdymas nuo grindų pakabinamu pulteliu - Sukimas elektrinis/varikliu valdomas - Strėlės išmatavimai I x P x A: 4100 x 125 x 300 mm Kranas komplektuojamas su nauju elektriniu grandininiu keltuvu STAR LIFTKET 1,0 t su elektriniu važiuokliu. Tipas 1000/2-4/1; kėlimo aukštis 4,0 m, kėlimo greitis 4/1 m/min. Dokumentacija prieinama. Funkcijos: - Elektrinis judėjimas bėgiu, kėlimas/nuleidimas ir sukimasis (elektrinis važiuoklis) Fodsu Nxnkepfx Abrspp Parduodama be nuotraukoje matomos tvirtinimo plokštės!

Būklė: naujas, Drilling capacity in steel (diameter): 50.0 mm Throat depth: 300 mm Drilling stroke: 160 mm Thread cutting: M 30 Fedpoxabq Iofx Abropp Speed range: 100 - 1600 rpm Table size: 615 x 430 mm Drill spindle Morse taper: 4 short-taper MT Column diameter: 145 mm Feed: 0.1-0.2-0.3-0.4 mm/rev Spindle-to-table distance: 147 / 688 mm Motor power: 1.8 / 2.9 kW Weight: 450 kg Machine height: 1865 mm Equipment: - Automatic feed with electromagnetic feed clutch - 4 feed rates 0.1-0.2-0.3-0.4 mm/rev - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Spindle guard with electrical safety interlock - Digital speed display - Machined base plate - Motor 1.8 / 2.9 kW – 100 – 1600 rpm Special accessories included: - LED machine lamp, item no. 12 - Thread cutting device, item no. 20.0 (thread cutting with stop) - Coolant system "A", item no. 24 (basic coolant tray, complete) - Digital drilling depth display, item no. 37.1 (5-digit LED display)

Būklė: naujas, apatinio volelio skersmuo: 140 mm, viršutinio volo skersmuo: 140 mm, šoninio volelio skersmuo: 140 mm, volelio skersmuo: 140 mm, vėjo ilgis: 2 070 mm, plieno lakšto storis (maks.): 4 mm, Įranga: avarinis stabdymas, dokumentacija / vadovas, grūdinti volai, kūginio lenkimo įrenginys, pasukamas viršutinis volas, - Capacity: 2070 x 4 - Electrically adjustable trailing roll - Electrically adjustable lower roll (material clamping) Fpodpfjhvr Nlex Abrop - Digital display for rear roll movement - Digital display for lower roll movement (material clamping) - Infinitely variable speed control - Hardened rolls - Conical rolling - Removable upper roll - Brake motor - Emergency stop - Documentation - 400V