Varikliu valdomos lankstymo staklės, lakšto storis 6,1-14 mm pirkti naudotą (132)

Būklė: naujas, Sheet width: 3100 mm Sheet thickness: 16.0 mm steel Pre-bending: 20.0 mm steel Upper roll diameter: 360 mm Side roll diameter: 250 mm Lower roll diameter: 330 mm Total power requirement: 15.0 kW Bdjdpfsxabzajx Alwsg Machine weight approx. 13,200 kg Space requirement approx. 5542 x 2100 x 1983 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2 powered main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Includes straightening function for welded pipes - Control unit / display with touchscreen function * Digital position display for the two side rolls - Mobile control panel - 2 selectable bending speeds - Hydraulic drop-end - Safety device (safety cable with switch unit) - Manometer / pressure gauge for the rolls - CE mark + Declaration of Conformity - Operating manual

Būklė: naujas, Sheet width: 2,600 mm Sheet thickness: 10.0 mm Bending capacity: 8.0 mm Top roller diameter: 230 mm Side roller diameter: 190 mm Lower roller diameter: 210 mm Total power requirement: 7.5 kW Machine weight approx.: 5,560 kg Dimensions (L x W x H): 4,650 x 1,380 x 1,300 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rollers (top & bottom) - With hydraulic cone bending device - Induction-hardened rollers - Includes straightening function for welded pipes - Control unit / display with touchscreen functionality * Digital position indicator for both side rollers - Mobile operating console - 2 selectable bending speeds - Hydraulic drop end bearing - Safety device (safety cord with switch unit) - Manometer / pressure indicator for the rollers - CE marking + Declaration of Conformity Bdedpfxjxaalqs Alwjg - Operating manual

Būklė: naujas, Sheet width: 3100 mm Sheet thickness: 13.0 mm Pre-bending: 10.0 mm Top roller diameter: 300 mm Side roller diameter: 210 mm Bottom roller diameter: 270 mm Total power requirement: 11.0 kW Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rollers (top & bottom roller) - With hydraulic cone bending device - Induction-hardened rollers Bdjdpfx Asxabflslwjg - Includes straightening function for welded pipes - Control unit/display with touchscreen function * Digital position display for both side rollers - Mobile control panel - 2x selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety cable with switch unit) - Manometer / pressure gauge for the rollers - CE marking + Declaration of Conformity - Operating manual

Būklė: naujas, Sheet width: 1600 mm Sheet thickness: 15.0 mm steel Bending capacity: 13.0 mm steel Top roll diameter: 230 mm Side roll diameter: 210 mm Lower roll diameter: 190 mm Total power requirement: 7.5 kW Machine weight: approx. 4225 kg Space requirements: approx. 4000 x 1300 x 1440 mm Features: - Electro-hydraulic 4-roll plate rolling machine - 2 driven main rolls (top & bottom roll) - With hydraulic conical bending device - Induction-hardened rolls - Includes straightening function for welded pipes - Control unit/display with touchscreen function * Digital position display for the two side rolls - Mobile control panel - 2 selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety rope with switch unit) Bdedpfx Aloxabkhowjg - Manometer/pressure gauge for the rolls - CE mark & declaration of conformity - Operating manual Image shows the same model series

Būklė: naujas, Sheet width: 3100 mm Sheet thickness: 8.0 mm steel Bdodpfexabm Aex Alwsg Pre-bending: 6.0 mm steel Top roll diameter: 230 mm Side roll diameter: 210 mm Bottom roll diameter: 190 mm Total power requirement: 7.5 kW Machine weight: approx. 6,020 kg Space required: approx. 5142 x 1390 x 1300 mm Features: - Electro-hydraulic 4-roll plate bending machine - 2 driven main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Includes straightening function for welded pipes - Control unit / display with touchscreen function * Digital position display for both side rolls - Mobile control panel - 2 selectable bending speeds - Hydraulic swing bearing - Safety device (safety rope with switching unit) - Manometer / pressure display for the rolls - CE mark + Declaration of Conformity - Operating instructions

Būklė: naujas, Sheet width: 2100 mm Sheet thickness: 8.0 mm (steel) Pre-bending: 6.0 mm (steel) Top roll diameter: 190 mm Side roll diameter: 150 mm Bottom roll diameter: 170 mm Total power requirement: 3.0 kW Machine weight: approx. 3,290 kg Space requirements: approx. 4042 x 1380 x 1254 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2 powered main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Includes straightening function for welded pipes - Control unit/display with touchscreen function * Digital position display for the two side rolls - Mobile control console - 2 selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety cord with switch unit) - Manometer/pressure gauge for the rolls Bjdpsxab E Ejfx Alwsdg - CE mark + declaration of conformity - Operating manual

Būklė: naujas, Sheet width 4100 mm Sheet thickness 8.0 mm (steel) Bending capacity 6.0 mm (steel) Top roll diameter 300 mm Side roll diameter 210 mm Bottom roll diameter 270 mm Total power requirement 7.5 kW Machine weight approx. 9,930 kg Space required approx. 6532 x 1730 x 1489 mm Equipment: - Electro-hydraulic 4-roll plate bending machine Bdjdpfx Aoxab Tcslwjg - 2x powered main rolls (top & bottom roll) - with hydraulic cone bending device - Induction-hardened rolls - Including straightening function for welded pipes - Control unit / display with touchscreen function * digital position indication for both side rolls - Mobile control console - 2 selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety rope with switch unit) - Manometer / pressure gauge for the rolls - CE mark + Declaration of Conformity - Operating manual

Būklė: naujas, Sheet width: 4100 mm Sheet thickness: 13.0 mm (steel) Pre-bending: 10.0 mm (steel) Top roll diameter: 360 mm Bjdpjxabuyofx Alwjdg Side roll diameter: 250 mm Lower roll diameter: 330 mm Total power requirement: 11.0 kW Machine weight: approx. 16,000 kg Space requirement: approx. 6542 x 1677 x 1900 mm Features: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Includes alignment function for welded pipes - Control unit/display with touchscreen function * Digital position display for both side rolls - Mobile control panel - 2 selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety wire with switch unit) - Pressure gauge/manometer for the rolls - CE marking + Declaration of Conformity - Operating manual

Būklė: naujas, Gamybos metai: 2026, ritinėlių skaičius: 3, apatinio volelio skersmuo: 190 mm, viršutinio volo skersmuo: 190 mm, šoninio volelio skersmuo: 190 mm, darbinis plotis: 1 550 mm, plieno lakšto storis (maks.): 9 mm, skaitmeninių ekranų skaičius: 2, Įranga: avarinis stabdymas, grūdinti volai, kūginio lenkimo įrenginys, pasukamas viršutinis volas, – Talpa 1550 x 9 mm – Elektriškai reguliuojamas galinis volas – Elektriškai reguliuojamas apatinis volas (medžiagos spaudimas) – Skaitmeninis ekranas galinio volo judėjimui – Skaitmeninis ekranas apatinio volo judėjimui (medžiagos spaudimas) – Grūdinti volai – Kūginis voliavimas Bdodpoy Rh H Tsfx Alwog – Atverčiamas viršutinis volas – Stabdžių variklis – Avarinis stabdis – Dokumentacija – 400V

Gamybos metai: 2021, būklė: naujas, - 4 rolls - Capacity: 1570 x 9 - Hardened rollers - Diameter of top roll: 200 mm - Diameter of bottom roll: 200 mm - Diameter of side roll: 180 mm - Hydraulic system - Digital display for left roll movement Bdodpfxogg N R He Alwog - Digital display for movement of center lower roll - Digital display for right roll movement - Hydraulic folding of the roll cover - ST-52 steel construction - Hydraulic drop-end for easy roll positioning - Hydraulic up and down movement system with central and side rolls - Hydraulic balancing system - Overvoltage protection - Documentation - 400V

Būklė: naujas, - Capacity: 1070 x 8 mm - Electrically adjustable rear roll Bsdpfx Aljgg N R Aewsdg - Electrically adjustable lower roll (material clamping) - Digital display for rear roll adjustment - Hardened rolls - Cone bending capability - Centralized lubrication system - Emergency stop - Documentation - Digital display for lower roll movement (material clamping) - Hardened rolls - Cone bending capability - Swiveling upper roll - Centralized lubrication system - Braking motor - Emergency stop - Documentation - 400V

Būklė: naujas, Ostas 3-Roller Plate Rolling Machine SMR-S 2070 x 190 Technical Specifications: Special Equipment Included in the Price: - Motorized adjustment of lower rollers - Hardened rollers - Motorized adjustment of rear rollers - Digital display Sheet width: 2070 mm Max. sheet thickness: 7.0 mm Pre-bending sheet thickness: 6.0 mm Roll length: 2070 mm Smallest bending diameter: 285 mm Roll diameter: 190 mm Weight: 3480 kg Dimensions (L x W x H): 3750 x 920 x 1260 mm Motor power: 4 kW Bdjdpfx Ajg Nz T Ielwjg Equipment: - Electrically driven upper and lower rollers - Swing-out upper roller - Cone bending device - Asymmetrical roller arrangement - Self-braking main motor - Separate control and operating panel - Safety cable, CE mark

Būklė: naujas, Ostas 4-Roller Plate Bending Machine 4R OHS 2070 x 220 Hydraulic Side Roller Adjustment Hydraulic Drop-End Hardened Rolls Cone Bending Device Separate Control Panel Roll Length: 2000 mm Top Roll Diameter: 220 mm Side Roll Diameter: 180 mm Total Motor Power: 4+3 kW Weight: 4900 kg Dimensions (mm): 4050 x 1550 x 1470 (L x W x H) Bending Performance Data: 11 mm at minimum inner diameter (5 x top roll) 9 mm at minimum inner diameter (1.5 x top roll) Pre-bending Performance: 9 mm at minimum inner diameter (5 x top roll) 7 mm at minimum inner diameter (1.5 x top roll) Bsdpfx Aotvn D Tslwsdg All bending capacities are calculated based on 250 N/mm² yield strength Material (ST 37 - ST 42 structural steel) Installed Special Equipment: Infinitely variable roll speed NC control:

Būklė: naujas, Fastech 3-Roll Plate Bending Machine FRS-S 2050 x 190 Technical Specifications: Special equipment included in the price: - Hardened rolls - Motorized rear roll adjustment - Motorized lower roll adjustment - 2 x digital display Sheet width: 2050 mm Sheet thickness: max. 7.0 mm Pre-bending thickness: 6.0 mm Roll length: 2050 mm Roll diameter: 190 mm Minimum bending diameter: 285 mm Weight: 2,695 kg Dimensions (L x W x H): 3600 x 1100 x 1200 mm Motor: 4 kW Equipment: - Top and bottom rolls electrically driven Bsdpfxehzq D Ue Alwodg - Top roll swing-out - Conical bending device - Asymmetric roll arrangement - Self-braking main motor - Separate control and operating panel - Safety wire - Values apply for St-37 / 240 N/mm² - CE mark

Būklė: naujas, Isitan Hydraulic 4-Roll Plate Bending Machine Model: 4R HMS 2050x200 - 2 Speeds - Driven upper and lower rolls - Hydraulic lateral roll adjustment - 3 digital readouts - Hydraulic drop-end bearing - Hardened rolls - Cone bending device - Separate control console Useful bending length: 2050 mm Upper roll diameter: 200 mm Side roll diameter: 180 mm Total motor power: 5.5 kW Working speed: 3 m/min – 6 m/min Weight: 3750 kg Dimensions (mm): 3850 x 1350 x 1290 (L x W x H) Bending performance: - 10 mm at minimum inner diameter of 1000 mm (5 x upper roll) - 8 mm at minimum inner diameter of 300 mm (1.5 x upper roll) Pre-bending capacity: Bdjdpsh Ar Dusfx Alweg - 8 mm at minimum inner diameter of 1000 mm (5 x upper roll) - 6 mm at minimum inner diameter of 300 mm (1.5 x upper roll) All bending capacities are calculated based on a yield strength of 250 N/mm² Material: ST 37 - ST 42 structural steel

Būklė: naujas, Ostas 3-Roll Plate Rolling Machine SMR-S 1070 x 130 Technical Specifications: Special features included in the price: - Hardened rollers - Motorized rear roll adjustment - Digital display - Sheet width: 1070 mm - Maximum sheet thickness: 7.0 mm - Pre-bending sheet thickness: 6.0 mm - Roller length: 1070 mm - Minimum bending diameter: 195 mm - Roller diameter: 130 mm - Weight: 1150 kg - Dimensions (L x W x H): 2550 x 630 x 1020 mm - Motor: 3.75 kW Equipment: - Electrically driven top and bottom rolls - Swing-out top roll Bjdpfx Aleiw D Dxowodg - Cone bending device - Asymmetric roll arrangement - Self-braking main motor - Separate control and operation panel - Safety cable, CE marking Values are valid for St-37 / 240 N/mm²

Būklė: naujas, Ostas 4 volų apvalinimo staklės 4R OHS 3070 x 275 Hidraulinis šoninių volų nustatymas 3 skaitmeniniai ekranai Hidraulinė atraminė guolių sekcija Grūdinti volai Įranga kūginiam lenkimui Atskiras valdymo pultas Volų ilgis: 3070 mm Viršutinio volo skersmuo: 275 mm Šoninio volo skersmuo: 220 mm Bendroji variklių galia: 16,5 kW Svoris: 10 300 kg Matmenys (mm): 5900 x 1750 x 1860 (I x P x A) Lankstymo našumo duomenys 12 mm su mažiausiu vidiniu skersmeniu (5 x viršutinis volas) 10 mm su mažiausiu vidiniu skersmeniu (1,5 x viršutinis volas) Prispaudimo našumo duomenys 10 mm su mažiausiu vidiniu skersmeniu (5 x viršutinis volas) 8 mm su mažiausiu vidiniu skersmeniu (1,5 x viršutinis volas) Bodpfx Aloxrduyswsdg Visos lankstymo galimybės skaičiuotos pagal 250 N/mm² tempimo stiprį Medžiaga (ST 37 – ST 42 konstrukcinis plienas) Pateiktos nuotraukos yra tik pavyzdinės.

Būklė: naujas, Ostas 4-čių volų apvali lenkimo staklės 4R OHS 3070 x 250 Hidraulinis šoninių volų pastūmimas 3 skaitmeniniai indikatoriai Hidrauliškai atverčiama guolio pusė Grūdinti volai Kūginio lenkimo įtaisas Atskiras valdymo pultas Bodpsyaqmasfx Alwedg Volų ilgis: 3070 mm Viršutinio volo skersmuo: 250 mm Šoninių volų skersmuo: 200 mm Variklių bendra galia: 7,5 + 1,5 kW Svoris: 9800 kg Matmenys (mm): 5050 x 1550 x 1470 (I x P x A) Lankstymo techniniai duomenys 9 mm prie mažiausio vidinio skersmens (5 x viršutinis volas) 7 mm prie mažiausio vidinio skersmens (1,5 x viršutinis volas) Pakreipimo techniniai duomenys 7 mm prie mažiausio vidinio skersmens (5 x viršutinis volas) 5 mm prie mažiausio vidinio skersmens (1,5 x viršutinis volas) Visi lenkimo pajėgumai apskaičiuoti pagal 250 N/mm² takumo ribą Medžiaga (ST 37 – ST 42 konstrukcinis plienas)

Būklė: naujas, Ostas 4-volų lakštinio metalo apvalinimo staklės 4R OHS 2570 x 250 Hidraulinis šoninių volų pastūmimas 3 skaitmeniniai indikatoriai Hidraulinė atverčiama guoliavietė Grūdinti volai Kūginio lenkimo įrenginys Atskira valdymo konsolė Bdjdpfx Aloxrdcdewjg Volų ilgis: 2570 mm Viršutinio volo skersmuo: 250 mm Šoninio volo skersmuo: 200 mm Bendroji variklių galia: 7,5+1,5 kW Svoris: 6300 kg Matmenys (mm): 4550 x 1550 x 1470 (I x P x A) Lenkimo techniniai duomenys 10 mm prie mažiausio vidinio skersmens (5 x viršutinis volas) 8 mm prie mažiausio vidinio skersmens (1,5 x viršutinis volas) Išankstinio lenkimo techniniai duomenys 8 mm prie mažiausio vidinio skersmens (5 x viršutinis volas) 6 mm prie mažiausio vidinio skersmens (1,5 x viršutinis volas) Visos lenkimo charakteristikos apskaičiuotos pagal 250 N/mm² slankumo ribą Medžiaga (ST 37 – ST 42 konstrukcinis plienas) Pateiktos nuotraukos yra pavyzdinės.

Būklė: naujas, Ostas 3-Roll Plate Bending Machine SMR-S 1070 x 130 Technical Specifications: Bdedpfxoiw D Dme Alwjg Special features included in the price: - Hardened rolls - Motorized adjustment for the rear roll - Digital display - Sheet width: 1070 mm - Maximum sheet thickness: 7.0 mm - Pre-bending thickness: 6.0 mm - Roll length: 1070 mm - Minimum bending diameter: 195 mm - Roll diameter: 130 mm - Weight: 1150 kg - Dimensions (L x W x H): 2550 x 630 x 1020 mm - Motor power: 3.75 kW Equipment: - Top and bottom rolls electrically driven - Top roll swing-out mechanism - Conical bending device - Asymmetric roll arrangement - Self-braking main motor - Separate control and operating panel - Safety cable, CE marking Values apply for St-37 / 240 N/mm²

Būklė: naujas, Ostas 3-Roller Plate Bending Machine SMR-S 1070 x 150 Technical Specifications: Special features included in the price: - Hardened rollers - Motorized rear roller adjustment - Digital display Sheet width: 1070 mm Sheet thickness: max. 8.0 mm Pre-bending thickness: 7.0 mm Roller length: 1070 mm Smallest bending diameter: 225 mm Roller diameter: 150 mm Weight: 1400 kg Dimensions (L x W x H): 2600 x 630 x 1020 mm Motor: 4.5 kW Equipment: Bdsdpfx Alsiw D Ecswjg - Top and bottom rollers electrically driven - Top roller swing-out - Cone bending device - Asymmetrical roller arrangement - Self-braking main motor - Separate control and operator panel - Safety cable, CE marking Values apply for St-37 / 240 N/mm²

Būklė: naujas, Ostas 3-Roll Plate Bending Machine SMR-S 1570 x 170 Technical Specifications: Special features included in the price: - Motorized adjustment of the lower rollers - Hardened rolls - Motorized adjustment of the rear roller - 2 x digital readouts - Sheet width: 1570 mm - Maximum sheet thickness: 8.0 mm - Pre-bending thickness: 7.0 mm - Roll length: 1570 mm - Minimum bending diameter: 255 mm - Roller diameter: 170 mm - Weight: 1,960 kg - Dimensions (L x W x H): 3,200 x 920 x 1,260 mm - Motor power: 5.5 kW Equipment: - Electrically driven top and bottom rolls - Swing-out top roll - Cone bending device - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operating panel - Safety cord, CE marking Specifications refer to St-37 / 240 N/mm² Bjdpfoiw D Smex Alwsdg

Būklė: naujas, Ostas 4-volų apvaliosios lenkimo staklės 4R OHS 3070 x 320 Hidraulinis šoninių volų reguliavimas 3 skaitmeniniai ekranai Hidraulinis atraminių guolių atidarymas Grūdinti volai Įranga kūginiam lenkimui Atskiras valdymo pultas Volų ilgis: 3070 mm Viršutinio volo skersmuo: 320 mm Šoninių volų skersmuo: 240 mm Bendroji variklių galia: 20 kW Bdodoxrdxfjpfx Alweg Svoris: 13 050 kg Matmenys (mm): 5900 x 1850 x 2050 (I x P x A) Lenkimo techniniai duomenys: 16 mm mažiausiam vidiniam diametrui (5 x viršutinis volas) 12 mm mažiausiam vidiniam diametrui (1,5 x viršutinis volas) Prilenkimo techniniai duomenys: 12 mm mažiausiam vidiniam diametrui (5 x viršutinis volas) 10 mm mažiausiam vidiniam diametrui (1,5 x viršutinis volas) Visos lenkimo galimybės apskaičiuotos pagal 250 N/mm² takumo ribą Medžiaga (ST 37 – ST 42 konstrukcinis plienas) Pateiktos nuotraukos yra tik pavyzdinės.

Būklė: naujas, - Capacity: 1570 x 9 mm - Electrically adjustable rear roller Bsdsg Ntlcopfx Alwodg - Electrically adjustable bottom roller (material clamping) - Digital display for rear roller movement - Digital display for bottom roller movement (material clamping) - Hardened rolls - Conical rolling - Removable top roll - Central lubrication system - Brake motor - Emergency stop - Documentation - 400V

Būklė: naujas, volelio skersmuo: 190 mm, darbinis plotis: 1 070 mm, plieno lakšto storis (maks.): 10 mm, – Capacity 1070 x 10 – Bending force capacity 1070 x 9 – Electrically adjustable rear roll – Electrically adjustable lower roll (material clamping) – Digital display for rear roll adjustment – Digital display for lower roll movement (material clamping) – Hardened rolls – Conical rolling – Removable upper roll – Central lubrication system – Brake motor – Emergency stop – Documentation – 400V Bedpfx Aovvczdslwedg