Optimizavimo skersavimo pjūklas Stromab TR 500, 2022 m.

Stromab TR 500

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 241306, pjūklo disko skersmuo: 500 mm, pjovimo aukštis (maks.): 170 mm, pjovimo plotis (maks.): 395 mm, galia: 7,5 kW (10,20 AG), gręžinio skersmuo: 30 mm, TECHNINĖ INFORMACIJA Hjdpfxjy Akvno Af Dsff Didžiausias pjovimo plotis: 395 mm Didžiausias pjovimo aukštis: 170 mm Mažiausias pjūklo disko skersmuo: 490 mm Didžiausias pjūklo disko skersmuo: 500 mm Pjūklo disko tvirtinimo skylės skersmuo: 30 mm Įvedimo stalo ilgis: 5.640 mm Išvedimo stalo ilgis: 1.180 mm Pateikimo greitis: automatinis ĮRANGOS DUOMENYS Įtampa: 400 V Srovės vartojimas: 16,5 A Saugiklis: 32 A Galia: 7,5 kW Transporto svoris: 800 kg Transportavimo pakuotės: 3 KOMPLEKTACIJA Automatinė medžiagos padavimo sistema

Būklė: naudotas, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table crosscut saw ----- Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, max. height: 100 mm. The frame is entirely constructed from thick-walled, reinforced, fully painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Hsdpfov Uq Tljx Af Djff Two-hand safety cutting control positioned ergonomically. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic regulator. Maximum system for weight balance and durability. Shock-absorbing system. Independent pneumatic adjustments for adaptation to different processing types. Durable and easily replaceable saw blade guide bar. TCT circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electro-pneumatic control. Pressing system operates via innovative ball bearings with dual dust protection and automatic lubrication system. CE-compliant electrical system. CE-certified models must be equipped as standard with infeed and outfeed support tables/roller conveyors of at least 1 meter in length. Technical Specifications: ----- Maximum cutting cross section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: TCT Z=108 Saw blade speed: 2800 rpm Air consumption per cycle: 5 Nl Extraction connections: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400 V / 50 Hz, 3-phase Working table height: 900 mm ± 20 mm Color tone: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity: 230 kg, diameter: 60 mm, spacing: 250 mm, width: 320 mm. Area between rollers enclosed with painted steel. Including side guide. 2 m roller conveyor (left of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity: 230 kg, diameter: 60 mm, spacing: 250 mm, width: 320 mm. Area between rollers enclosed with painted steel. Including side guide, stop guide, and millimeter scale. 2 robust pneumatic stops, width 200 mm ----- Total price ex works: on request! ----- Pictures and video not original; show an identical model. Additional options (e.g., longer infeed/outfeed tables, stop systems) available on request! (Technical data according to manufacturer's information—subject to change!)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, veikimo valandos: 1 234 h, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 7 000 mm, padavimo eiga Y ašimi: 600 mm, padavimo ilgis Z ašis: 250 mm, X ašies padavimo greitis: 80 m/min, bendras ilgis: 8 000 mm, bendras aukštis: 1 800 mm, bendras svoris: 2 000 kg, pjūklo disko skersmuo: 500 mm, disko skersmuo: 500 mm, stalo ilgis: 7 000 mm, Įranga: USB jungtis, Parduodama optimizavimo pjovimo staklė STROMAB MATRIX TR 500 labai geros techninės būklės, naudota nedideliame gamybos ceche, daugiausiai statybinei medienai pjauti. Naudota karkasinių namų surinkimui. Staklės visiškai tvarkingos, prižiūrėtos. Paruoštos darbui be papildomų investicijų. Parduodama su PVM sąskaita faktūra. VIETOJE GALIMA IŠBANDYTI Hsdpowp Rvhjfx Af Doff KAINA derinama.

Būklė: naudotas, Gamybos metai: 2016, bendras aukštis: 1 600 mm, bendras ilgis: 14 100 mm, bendras plotis: 1 600 mm, Svoris: 2.500 kg - Pagaminimo metai: 2016 - Dokumentacija prieinama: Taip - CE ženklinimas yra: Taip - CE sertifikatas yra: Ne - Serijos numeris: 6237 - Įtampa [V]: 415 - Srovės suvartojimas [A]: 20 - Transportavimo matmenys: 14100 mm x 1600 mm x 1600 mm (i x p x a) - Transportavimo svoris [kg]: 2500 kg - Transportavimo paketų skaičius [vnt.]: 4 Finansinė informacija Hfsdswnh N Nepfx Af Def PVM: Nurodyta kaina be PVM PVM / maržos apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir mainai bet kada galimi visiems pramoniniams įrenginiams. Yorick Diebels

Gamybos metai: 2005, būklė: naudotas, HIT mechanisation for KVH and BSH production for components up to width 600 mm, height 300 mm, length 18 m Hsdpopiurmsfx Af Deff consisting of various parts available individually or as a complete package - Layer cross pusher - Various cross conveyors - Workpiece roller conveyors - Heavy-duty roller conveyors - 5 lifting tables each mounted with 2 cross conveyors on transfer trolleys - Stacking machine - Control cabinets - Roller tracks - Travelling timber crosscut saw with waste disposal

Būklė: naudotas, Gamybos metai: 2005, bendras aukštis: 1 750 mm, bendras ilgis: 1 350 mm, bendras plotis: 1 350 mm, Optimizuojanti skerspjovimo pjūklas Stromab TR 500 Matrix 4 4000 Pagaminimo metai: 2005 Variklio galia: 10 AG Automatinė stūmimo sistema Rašalinis spausdintuvas - Pagaminimo metai: 2005 - Dokumentacija prieinama: Ne Hjdpfxjwq U Dxs Af Djff - CE sertifikatas: Nėra - Serijos numeris: 250143 - Pagrindinio variklio galia [kW]: 7,5 - Didžiausias pjovimo plotis [mm]: 375 - Ašies pjūklo disko skersmuo [mm]: 30 - Padavimo stalo ilgis [mm]: 4300 - Išleidimo stalo ilgis [mm]: 2000 - Transportavimo matmenys: 1350mm x 1350mm x 1750mm (i x p x a) - Transportavimo paketų kiekis [vnt.]: 3 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/Diferencijuotas apmokestinimas: PVM atskaitomas verslui Pristatymas ir pramoninių įrenginių išpirkimas galimi bet kuriuo metu

Būklė: naudotas, Gamybos metai: 2007, mašinos/transporto priemonės numeris: 1377, STROMAB TR 500 PNEUMATIC MITRE SAW – CE CERTIFIED – USED - equipped with 4000mm TIGERSTOP electronic positioning stop - 4500mm infeed roller table Hfodjt U Izpepfx Af Dof - 4500mm outfeed roller table - 500 mm diameter blade - maximum cutting capacity: 360 mm (W) at 60 mm (H), 135 mm (H) at 280 mm (W) - 10 HP motor - 415 volts - serial no. 1377 - year: 2007

Gamybos metai: 2001, būklė: paruoštas naudoti (naudotas), Saw blade diameter: 750 mm, blade speed: 2200 rpm, table dimensions: 1500 x 1500 x 900 mm, cutting height at 90°/45°/30°: 295/200/137 mm, motor power: 16 kW, length: 1800 mm, width: 1500 mm, height: 1100 mm, weight: 650 kg. An on-site inspection is possible. Hfsdpfourwy Ajx Af Djf

Būklė: naujas, Gamybos metai: 2026, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness 10 mm Work table inclined by 8° Technical specifications of the cutting unit: Pneumatic up-cut saw TR500 Motor power 10 HP (7.5 kW), 400 V / 50 Hz TCT saw blade diameter 500 mm, F=30 Z=144 S=4.6 Cutting cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for package weight up to 80 kg Maximum push feed speed 90 m/min Pneumatic lifting of pusher at end of cutting cycle and overhead return Hfodjhw Ng Iepfx Af Dof Data input management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Load and save machine parameters via USB port Edit and enter cutting cycles (patterns) directly at the controller Transfer of cutting lists created on PC via USB or Ethernet port Operating software: Manual input of stack length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, order, and board sequence) Up to 1000 cutting lists with 11 lengths each, or one list with 10,000 consecutive lengths 'OPTI' package: automatic board length detection and full optimization Piece length reading via photocell Cutting cycle with 6 optimization criteria (longest length, order, board sequence, volume, minimal waste, and priority length) 'OPTI PLUS' package: total optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: 'OPTI PLUS' package: for knot and defect removal Photocell for detecting knots and defects during wood mapping Marking with fluorescent chalks/crayons (Note: only orderable in combination with ZA250) Pneumatic side clamping device Program for creating lists on the PC in XML format

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 0x0x0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully optimized automatic cross-cut saw TR-500 MATRIX-6000 - Motor drive power: 7.5 kW - Saw blade diameter: 500 x 30 mm Z=144 - Cutting capacity according to cutting diagram - Cutting capacity 135 x 280 mm - Cutting capacity 125 x 295 mm - Cutting capacity 95 x 325 mm - Cutting capacity 80 x 340 mm - Cutting capacity 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cutting unit - 8° inclined worktable - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 1000 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x diameter 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Air velocity at center of extraction port: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min. - Drive by brushless servomotor - Feed system with precision rack and pinion, measurement by servomotor - Pneumatic pusher lift at end of cycle and upper return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection - Marking with fluorescent chalk - 8° inclined working surface - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Cutting list creation directly via machine control - Up to 1000 cutting lists with 10 sizes each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard USB and Ethernet ports - Including OPTI function for automatic measuring of the workpiece to be cut. Optimal solution for processing material with variable lengths, for single or bundle feeding - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, priority) - Including OPTI PLUS function for mark detection, enabling full optimization and removal of knots and defects - Marking with chalk Option: Hedpfx Afev A Htdo Dsff - Pneumatic side clamp €850.00 - Cutting list creation via PC €360.00 - Outfeed table €360.00/m

Gamybos metai: 2011, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Finger jointing line for cross-sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL Tilt Destacking Unit - SH/4t - 1.75x1.75x6.00m - 4t – minimum length 2.50 m, semi-automatic package separation. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions 1.75 x 1.75 x 6.00 m, max. stack load 4 t, shortest wood length 2.5 m. Hfedpfxji Ezx Do Af Djf 2. HOWIAL Lamella Separator VE 1 for cross-cut saw. With pneumatically controlled fingers for material marked after defect detection, deposited on the underlying roller conveyor. 3. HOWIAL Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and registration system for the automatic detection and control of wood moisture using the electrical resistance method in a cycle-based process. 4. Gann DMT-8 Digital wood moisture measurement, control and registration system for the automatic detection and control of wood moisture using the electrical resistance method in a cycle-based process. System integrated in a large control cabinet, complete with inkjet printer. 5. HOWIAL Cross-Cut Saw AS-30 B Pneumatically controlled under-table cross-cut saw with 2 automatic feed units, automatic cross-cutting. Special photoelectric cell control for detection of fluorescent marking lines. Automatic waste detection possible. Saw motor power 7.5 kW Saw blade diameter 700 mm Feed drive approx. 2 x 1.5 kW Air pressure 8 bar Feed speed max. approx. 60 m/min 6. HOWIAL Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width 350 mm Belt length 2000 mm Belt speed 0.4 m/sec 7. HOWIAL Double Roller Conveyor RO-2, 6.00 m long Incl. cross transfer, equipment for the finger jointing automation. Driven by round belts, all rollers driven. Cross removal via chain conveyor. Ejector ± moisture, right side. Adjustable transport speed 100 m/min. Length approx. 6.00 m Roller width approx. 400 mm Diameter 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Infeed length from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Pressing force 5 - 22 tons Spindle diameter 50 mm Finger profile 15/15 Spindle speed approx. 6000 rpm Total connected electrical load approx. 62 kW Machine weight approx. 9 tons. OEST comb gluing system for PU adhesives Modern Telemechanique PLC control. 9. HOWIAL Roller Conveyor with De-stacking Driven roller conveyor with automatic ejector and hydraulically operated de-stacking arms. Technical data: H: 920 mm L: approx. 12,000 mm 10. Safety Fencing including safety switches 11. Finger Joint Testing Machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385. Support distances freely adjustable, integrated measuring scale, automatic calculation of support distances in software. Fully automatic test sequence via mouse click on PC (not included). Alternatively, test sequence can be triggered from control panel. Connects to any standard PC or laptop (Win 2000/XP) using provided RS232 serial cable. Fully automatic data acquisition and test report generation in MS Excel with graphical presentation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. pressing force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISASSEMBLY

Būklė: naudotas, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw featuring a pneumatic saw blade feed and a blade diameter of 500 mm. This machine is ideal for precise and efficient cross-cutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 — Technical Data • Maximum cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Compliance marking: CE mark • Weight: approx. 420 kg — Condition & Delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on pallet by freight forwarder available at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and errors excepted. Hsdpfxexiza Uo Af Doff