Kryžminio pjovimo pjūklas po stalu

SALVAMAC Legend 500

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Semi-automatic under-table crosscut saw, including: 2 meter roller conveyor on the left side of the saw with 1 manual flip stop and 1 pneumatic flip stop 2 meter roller conveyor on the right side of the saw General Technical Data: Maximum cutting range: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm (Z = 108) Rotational speed: 2,800 rpm Compressed air: max. 8 bar Extraction ports: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph Working height: 900 mm +/- 20 mm Standard accessories: Automatic safety and pressure device Two-hand control and protective shield Carbide-tipped (HM) saw blade Bledpfjw Rcibsx Aahed SAFE The ergonomically positioned two-hand control and the blade guard ensure absolutely safe operation. Safe, protected, and reliable! SOLID The LEGEND saws are designed and built to work even under demanding conditions and with hard woods. The structure is made from thick-walled, fully-coated reinforced steel. Solid, compact, and resilient. FAST Compared to a pull or radial arm saw, the LEGEND guides the saw blade pneumatically and extremely quickly through the workpiece. As a result, the physical strain on the operator is significantly reduced.

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Bljdsw Sy T Hopfx Aahjd Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Sąlyga: naujas, Semi-automatic crosscut saw SALVAMAC LEGEND 500 Max. cutting height: 125 mm Introductory special price Includes: - Semi-automatic crosscut saw SALVAMAC LEGEND 500 Max. cutting height: 125 mm SAFE – SOLID – FAST The compact, simple, robust, and innovative machine guarantees maximum safety, flexibility, and reliability. Standard equipment: - Automatic safety and pressure device - Ergonomically positioned two-hand control - Rigid safety shield - Incl. carbide-tipped saw blade 500 mm, Z = 108 Technical data: Maximum cutting capacity: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Speed: 2,800 rpm Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction port: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Minimum distance between stop (left side) Bljdpfevtrkisx Aahod and saw blade: 70 mm Minimum distance between stop (right side) and saw blade: 520 mm Minimum distance between two stops (optional): 60 mm Note: Basic price without roller conveyors. When installing the saw, at least 1 m of support table or roller conveyor must be installed on both the left and right sides of the saw. Includes: - Roller conveyor without scale right side, per meter Roller conveyor, 320 mm width, with 100 mm stop rail and galvanized rollers, Load capacity: 230 kg, Diameter: 60 mm, spacing: 250 mm, Right side of the saw, price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Includes: - Roller conveyor with stop rail and scale left side, per meter Roller conveyor, 320 mm width, with 100 mm stop rail and galvanized rollers, Load capacity: 230 kg, Diameter: 60 mm, spacing: 250 mm, Left side of the saw, price per meter Note: The stop must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Includes: - Pneumatically pivoting stop, 200 mm length - New showroom machine -

Sąlyga: naujas, Gamybos metai: 2025, The most highly regarded solution. The Legend_500 features a fully painted, heavy-duty, and reinforced steel construction. Equipped with a 500 mm diameter saw blade, 5.5 kW power output, and an operating speed of 2,800 rpm, it is the ideal machine for anyone processing wood up to 125 mm thick and 310 mm wide (optionally up to 375 mm). Bjdpfxjuii Rgo Aahjld

Sąlyga: labai geros būklės (naudotas), Stehle S820 (automatische Gerade-Messer-Schleifmaschine). Bitte überprüfen Sie Ihren Spam-/Junk-Mail-Ordner, falls Sie innerhalb von 24 Stunden nach Absenden Ihrer Anfrage keine Antwort erhalten! Technische Daten: • Maximale Werkzeugbreite: 330 mm • Werkzeugdurchmesser für Hobelköpfe (Mindest-/Maximalgröße Messerträger): 120 – 230 mm • Schleifscheibendrehzahl: 2.850 / 5.750 U/min • Schleifen von 2 bis 12 Messern pro Kopf mittels Teilapparat möglich • Teilapparate für das Schleifen von 4, 6, 8, 10 und 12 Messern im Lieferumfang • Antriebsleistung Schleifscheibenmotor: 1,3 kW • Freiwinkel: 10 – 35° • Kühlmitteltank: 125 Liter Bedpsq Dzkusfx Aahjld • Motor der Kühlmittelpumpe: 0,28 kW • Anschlusswert gesamt: 2 kW Bitte überprüfen Sie Ihren Spam-/Junk-Mail-Ordner, falls Sie innerhalb von 24 Stunden nach Absenden Ihrer Anfrage keine Antwort erhalten!

Sąlyga: naudotas, Gamybos metai: 2025, New display machine! Partnership Edition, including: Bjdpfjw Tfzlsx Aahsld - 1 meter roller conveyor to the right of the saw, with galvanized rollers. - 1 meter roller conveyor to the left of the saw, with galvanized rollers. - 1 piece pneumatic swing-away stop, 200 mm length, with operating switch on the saw frame. SAFE - SOLID - FAST This compact, simple, robust, and innovative machine guarantees maximum safety, flexibility, and reliability. Standard equipment: - Automatic safety and clamping device - Ergonomically positioned two-hand control - Fixed safety shield Load capacity: 230 kg, roller diameter: 60 mm, spacing: 250 mm, width: 350 mm. Includes rear 100 mm high stop rail with scale. - 1 pcs HM (carbide-tipped) saw blade, 500 mm, Z = 108 Technical data: Maximum cutting range: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Speed: 2,800 rpm Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction connection: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 phases Table height: 900 mm +/- 20 mm Minimum distance between stop and saw blade: 70 mm Minimum distance between 2 stops: 60 mm Location:

Sąlyga: naujas, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW Speed: 2,800 rpm Compressed air connection: 6-8 bar Working height: 900 +/- 20 mm Dimensions (L/W/H): 10,645 x 1,000 x 1,300 mm SALVAMAC COMBO 500 – The semi-automatic cross-cut saw with SALVASTOP 100 - electronic length stop/pusher --- Pos. 1: Legend 500 Under-table Cross-cut Saw --- Maximum cutting capacity: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, max. h = 100 mm. The machine frame is entirely made of thick-walled, reinforced, fully-painted steel. Solid floor mounting system with flanged steel feet for securing holes. Two-hand safety cut control in ergonomically positioned handles. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic regulator. Maximum weight compensation system for increased durability. Shock-absorbing system. Independent pneumatic adjustment options for adaptation to different types of material processing. Durable and easily replaceable saw blade setting rail. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic top workpiece clamp with electro-pneumatic control. Pressing system uses innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE versions must be equipped, as standard, with at least 1-meter-long infeed and outfeed tables. Technical Data: --- Maximum cutting section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: Carbide-tipped Z=108 Blade speed: 2,800 rpm Air consumption per cycle: 7 Nl Extraction connection: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: 400V/50Hz, 3-phase Table height: 900 mm ± 20 mm Color: RAL 7035 - RAL 1007 Pos. 2: Salvastop 100 Electronic Length Stop --- - Operating modes: 2 modes 1 x Stop (length stop positions at desired value), and 1 x Push (sequential processing of multiple lengths at the press of a button) - With servo drive - Pusher speed: up to 60 m/min - Pusher length: 600 mm - 7'' touchscreen display - Max. weight of wood to be pushed: up to 100 kg - USB port COMBO_500 - 6400/7000 - Roller conveyor with guide located to the right of the saw. Painted steel frame with galvanized rollers. Load capacity: 230 kg, roller diameter: 60 mm, spacing: 250 mm, width: 320 mm. Length: 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length: 6.4 m. Total length: 7.0 m. With table: 7 m. Width: 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT GUARD Moveable, rather than fixed, front guard. The guard lifts during cutting to ensure safe working conditions. Loading and unloading of wood is facilitated by the lowered guard. The system is equipped with an additional special secured pneumatic system with linear guidance, reflecting state-of-the-art engineering and advanced technology. SOFTWARE CONNECTION FILES Blsdpfx Ajvu Hd Tjahod Preparation f...

Sąlyga: naudotas, Gamybos metai: 2000, Velenų skaičius: 5 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 160 mm Padavimo variklis: 4 kW Padavimo greitis: 5–24 m/min. Weinig Unimat 23E keturpusio obliavimo ir profiliavimo automatas, skirtas medienai obliuoti ir profiliuoti iš visų keturių pusių, turintis mobilų veleną automatiniam reguliavimui bei griovelių stalą (pasirinktinai be griovelių stalo) trumpiems ir lenktiems ruošiniams bei ilgą lyginimo stalą. Bljdpfowztw Sex Aahsd Papildomai: Pakeitimas į įprastą lygų stalą pagal užklausą. Velenas 1: Apačioje / 40 mm / 5,5 kW Velenas 2: Dešinėje / 40 mm / 7,5 kW Velenas 3: Kairėje / 40 mm / Bendras variklis su 2-uoju velenu Velenas 4: Viršuje / 40 mm / 7,5 kW Velenas 5: Apačioje / 40 mm / 5,5 kW

Sąlyga: naujas, Gamybos metai: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Swivel adjustment with hand crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Roller conveyor length: 2 x 1500 mm Blodeizkhvspfx Aahod Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Sąlyga: geras (naudotas), Gamybos metai: 1996, Four-Sided Planer Weinig Unimat 23 – German-made – Serrated table – Year of manufacture: 1996 – Driven feed rollers in the table TECHNICAL SPECIFICATIONS: Planing width: 230 mm Planing height: 160 mm Bledpfx Ajh Dwl Djahod Serrated table Spindle diameter: 40 mm 1st bottom spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 11 kW 5th bottom spindle: 7.5 kW Infinitely variable feed speed: 6–36 m/min Feed motor power: 5.5 kW Six upper steel feed rollers Two upper rubber feed rollers Three driven rollers in the table Pneumatic feed pressure Pneumatic pressure shoe Spindles with brakes Infeed table length: 1970 mm Electric height adjustment Centralized (split) lubrication Extraction port diameter: 140 mm Machine dimensions (L/W/H): 410 / 200 / 180 cm Weight: approx. 3000 kg