Kryžminio pjovimo pjūklas po stalu

SALVAMAC Legend 500 mit Salvastop Video

Būklė: naudotas, Gamybos metai: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CETRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right saw unit is fixed; the left unit can be adjusted. The preset cutting length can be read on a digital measuring display. Both units feature supports that enable the simultaneous cutting of 2 glazing beads. To cut larger cross-sections, the upper support can be removed. Upon completion of the cutting process, the pneumatic clamping cylinders automatically swing aside to facilitate the loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital measuring display • Pressure switch • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch Ppodjxnlgcopfx Adzot • Tool kit • Safety guards with horizontal, swiveling clamping devices • Two-hand operation • Belt drive • Pneumatic unit stroke • Central support TECHNICAL DATA • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Space requirement (standard equipment): 3000 x 850 mm EXTENDED CUTTING CAPACITY 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions 1 pc Set of 2 mechanical stops for adjusting up to 4 intermediate angles Additional central support 1 pc Adaptations for rebated profiles 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for the profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (in green), a beveled pusher is shown, which follows the inclined profile and presses it against the (red) spacer on the stop. Location: Garbsen

Būklė: naudotas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: A1711012, Pos. 1 VEN CLEAN Smart Dust Extraction Unit Compressed air dust extraction system for cleaning workpieces to be painted, specifically for removing dust from profiled workpiece surfaces. Five rotating air-blast stars are installed, which remove dust from the surface. The loosened dust is extracted from both sides via extraction ducts. An external extraction system provided by the customer is required. Podpeu U Ryyjfx Adzept Technical Data: Length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Overall width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h (to be provided by the customer) Compressed air consumption: 980 Nl/min Ionization via nozzle bar (non-ATEX) with compressed air nozzles, Compressed air consumption: 840 Nl/min Pos. 2 VEN SPRAY Comfort Automatic Spraying Machine - Manufacturer: Venjakob - Model: VEN SPRAY Comfort CNC 7000 - Year of manufacture: 2017 - Length: 4,350 mm - Working height approx. 930 mm +/- 20 mm - Working width: 1,300 mm - Operator side: left - Price for overhauled machine - Current condition: machine not overhauled - Dual gun drive - Dry extraction - Extraction nozzle diameter: 500 mm - Exhaust air capacity: 10,000 m³/h - Conveyor belt transport system - Feed speed continuously adjustable: approx. 2–6 m/min - With belt cleaning system with tungsten carbide scraper Complete pre-installation for retrofitting a second washer is provided. - Gun control, Touch Screen CNC7000 - 1 installed paint circuit (additional circuits optional) - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Length: 4,350 mm + (2,060 mm) - Width: 3,540 mm - Height: 2,600 + 440 mm - Free-standing control cabinet - Electrical connection: 23.33 kW / 63 A - Power supply: 400 V / 50 Hz - Colour: RAL 7035 - Location: in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also offer you assembly and commissioning of the system, as well as training for your staff. Upon request, we also provide regular maintenance and servicing for the machine. For further information, simply contact us!

Gamybos metai: 2021, būklė: naujas, mašinos/transporto priemonės numeris: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm horizontal + 2200mm inclined Incline angle at the bend: 45° Discharge height: approx. 1800mm Height of the horizontal section: 200mm top edge PU conveyor belt Conveyor belt type: EM 9/2 0+05 PU, petrol matt finish Belt width: 500mm 21 pcs. T30 cleats welded on, pitch 310mm * Antistatic due to threads in the running side fabric Endless welded with stepped finger joint 40mm corrugated edge, both sides, high-frequency welded * Edge-free zone on both sides for belt guidance on the incline Full-surface support plate Drive: Motor approx. 1.1kW Belt speed: approx. 0.4 m/sec * Optionally controllable with frequency inverter Connection: 220/400V, 50Hz, protection class IP54 Ppodpfjh Eld Esx Adzjt

Gamybos metai: 1988, būklė: reikia remonto (naudotas), Mechanizavimas įvedimui prieš obliavimo stakles, tinkama KVH/BSH ir pan. Rekomenduojama ruošiniams iki maždaug 13 m ilgio. Ideali KVH ir BSH linija prieš obliavimo stakles. Išilginis iškrovimas – gaminių atskyrimas. 4 vnt. šoniniu būdu reguliuojamų diskinio pjūklo atpjovimo įrenginių. Pjūvio matmenys: 180 x 220 mm, 150 x 300 mm. Užtenka vieno operatoriaus. Ppodpfx Aovbtpedzot

Būklė: naudotas, Söderhamns rotacinė žievės nuėmimo mašina Cambio 85 - 66 - A Skersmuo: 10 - 66 cm Ppsdpfx Aextc Afedzot Pagrindinis variklis: 30 kW

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 7 kW (9,52 AG), pjūklo disko skersmuo: 305 mm, bendras ilgis: 3 100 mm, bendras plotis: 3 100 mm, bendras svoris: 3 000 kg, pjovimo ilgis (maks.): 3 100 mm, pjovimo aukštis su įrėžėju (maks.): 70 mm, X ašies padavimo greitis: 40 m/min, padavimo greitis Z ašis: 50 m/min, vietos reikalavimas ilgis: 3 100 mm, reikalingas plotis: 3 100 mm, Įranga: dozatorius, sūkių greitis be galo kintamas, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture manufacturing, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Technical Main Data & Equipment: Longitudinal saw FM 20-3100 with hardened guides Automatic forward and return stroke of the saw unit (return stroke automatically lowered) Feed drive via three-phase geared motor, frequency inverter-controlled Feed speed: 2 – 40 m/min (infinitely variable) Return speed (rapid traverse): 50 m/min Extraction channels in machine base & pressure beam Score saw adjustable externally (without opening the hood) Protective hood interlock with lamella curtain SZ 5008 3-stage cutting height adjustment LA 4143 6 recesses in the pressure beam for offcuts up to 5 mm Saw motor: 7.0 kW | Scorer motor: 1.1 kW (can be switched off) Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: Angle pressure device WP 5003 with hold-down claw for crosscuts Adjustment range: 2400 mm Fully automatic control via DNC-AT Material infeed table HP 5091 2 top-mounted guides, rack-and-pinion guide Servo drive material pusher Feed speed: 25 m/min (safety limited) Return: 40 m/min 6 clamping fingers, 4 double roller tracks Table length: 3100 mm | Gauge depth: 3150 mm Closed Pertinax surface in the angle stop area Control & Operation: Operating system: Ubuntu Linux Integrated PC with hard drive, parallel & serial interface Network capable (LAN/WLAN), remote maintenance via Internet (TeamViewer, Remote Desktop) USB print function Multilingual dialog programming 15" flat screen, multifunction keyboard in swiveling control panel Graphical display of cutting patterns and processes Software / Programs: OPTIMAX: Office optimization, offcut calculation, material requirements OPTIMIN: Direct optimization at the machine PC with parts list entry Pjdpfxswrn Efs Adzjpt Processing via USB, floppy disk, or online (optional) Manual, automatic, & special operating modes (e.g., grooving, veneered parts) Additional Equipment: Angle stop table HP 5085: 1,720 x 800 mm | Pertinax overlay Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay Air cushion system LK 5030 integrated in both tables Circular saw blade KSB 4005: Ø 305 mm, Z = 60 Circular saw blade KSB 4006: Ø 200 mm, Z = 60, conical Reliability in Continuous Operation: This machine is used worldwide – even under extreme conditions. Whether in the dry climate of Africa or high humidity in Southeast Asia (e.g., Thailand): the PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and endurance. Warranty: We are so confident in the quality and durability of our machines that we offer a 7-year warranty on the machine construction and guideways. (Excludes electrical supply parts and wear parts.) 📞 Contact us for a customized quote or to schedule a viewing appointment. Machine available from stock. Delivery, commissioning, and training available as options.

Būklė: naujas, Sheet width: 1020 mm Sheet thickness: 2.5 mm Frame width: 1050 mm Opening width: ... mm Pjdpsupxf Ujfx Adzept Max. bending angle: 135° Total power requirement: manual operation Machine weight: approx. 0.32 t Space requirements: approx. 1.4 x 0.6 x 1.3 m Segment bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250, and 275 mm.

Būklė: naudotas, Number of sanding units: 4 pcs. Sanding width: 190 mm Max. sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from top/bottom Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. High-stability premium version with innovative features. Designed for high continuous load even with greater material removal. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from top and bottom 1st sanding unit: heavy steel roller 2nd sanding unit: rubber-coated roller and shoe 3rd finishing unit: fiber brush (see optional equipment below) Pjdpfx Adevu Hgbszjpt - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and longer belt life - Forced pneumatic belt oscillation - Effective dust extraction directly at the sanding rollers - Airborne dust extraction at tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment below via precision lead screw with scale ring (resolution 0.1mm) - Pneumatic belt tensioning with constant tension pressure - Quick belt change with pneumatic belt release in seconds - Adjustable sanding belt tracking during belt changes - Electropneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip and adhesive-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical Data: - Belt speed: 22 m/s - Belt length: 1,800mm - Belt width: 200mm - Working width: 190mm - Sanding thickness: 2–180mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200mm at 0.37 kW each - Extraction ports: 2 x 180mm, 2 x 120mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with Softdisc 2,740mm): 2,600mm - Length with control panel (with Softdisc 3,035mm): 2,985mm - Width: 880mm - Height: 1,910mm - Approx. weight: 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air blow-off 4-belt via nozzles directly at the radii ...

Būklė: naujas, Glazing Bead Nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner joints are closed - No open glazing bead gaps - No color discrepancies during paint finishing - Glazing bead frames are easy to assign 2P Jumbo Automatic E.C. Staple Corner Joining Machine for stapling glazing bead frames. Option to select between automatic and manual operation; With angle stop, clamping device from above and in front. Pressure can be regulated separately. Insertion of parallel and stacked staples possible via electronic program control. Stapler unit can be mounted on a suitable work table. Operation via foot pedal. ----- Price for this configuration upon request! Plus statutory VAT and packaging/shipping ----- Ppedpfxjvnh T Nj Adzet Pictures show the 2P Staple Corner Joining Machine with the optional mobile work table (see details under surcharge options). Surcharges: ----- Mobile work table Height-adjustable from 700 to 1,000 mm, 2 plug-in support rails, 1,000 mm long, 2 swiveling and sliding support rails, 1,000 mm, all rails covered with felt, 4 swivel castors, 2 of which with brake. ----- Surcharge: €1,311.00 net Staples: packages 15 mm staples (pack of 2,000 pcs): Price €22.00 12 mm staples (pack of 3,000 pcs): Price €32.00 10 mm staples (pack of 3,000 pcs): Price €32.00 Dimensions and weights ----- Jumbo Automatic E.C.: 470 x 370 x 300 mm, 35 kg Work table: 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping. (Technical data as per manufacturer's information - subject to change!)

Būklė: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: P 04-09-002, neu U05 10 001, Spray Automat Venjakob HGS-K All images for reference only. - Manufacturer: Venjakob - Year of manufacture: 2004 - Working width: 800 mm (expandable to 1000 mm) - Current condition: not refurbished - Offer price is for the refurbished condition - Operator side: right - Dual pistol drive system - Dry exhaust system: 4,000 m³/h - Exhaust connection diameter: 400 mm - Conveyor belt transport system - Feed rate continuously adjustable: 3 - 8 m/min - With paint recovery system - Gun control unit: LS 1 - Installed paint circuits: 1 - Airless spray system: 4 units of Krautzberger KAA 1300 - Number of paint pumps: 1 - Pump manufacturer: Wagner 35-70 Pedeumvr Topfx Adzspt - Suitable for solvent-based paints - Suitable for water-based paints - Total connected load: 7 kW, current consumption: 17 A, protection: 35 A - Location: in stock - Permissible voltage fluctuations: max. +/- 5% _____ Optionally, we can provide you with an offer for installation and commissioning of the system, as well as staff training. On request, we also offer regular maintenance and servicing of the machine. For further information, feel free to contact us!