Univ. spindulių metalo juostinis šlifuoklis

GRIT GR 75-2H

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Cpodpfofxyhfjx Aahew Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: naudotas, Contact grinding wheel dimensions: 50 x 100 Ø mm Cpsdpfx Asb Tcv Hjahow Drive motor: 380 V, 0.7 kW Space requirement: 650 x 550 x 1050 mm

Būklė: naujas, Gamybos metai: 2023, Tube drilling machine, angled drilling machine, drilling automatic TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE VIEWED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Max. tube length 3,000 mm (option: 6,000 mm) - Positioning accuracy +/- 0.2 mm - 10 stops (expandable as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube rotation device Cpedpfxelgvkij Aahjw - Drilling unit power 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit illumination - Integrated tool cabinet - Round tubes up to 114 mm - Square tubes up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm - Double post up to 100 x 15 mm - Flow drilling up to M12 - Drill holes up to Ø 50 mm

Būklė: naujas, Special promotional price for stock items! Only while stocks last! Price ex stock, plus VAT. Belt Grinder: Bernardo Type/Model: MS 75 x 2000 S Condition: new Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec Contact wheel Ø x W: 200 / 80 mm Flat grinding table: 460 x 75 mm Extraction port: 100 mm Motor output S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Features: - High grinding performance due to high belt speed - Quick adjustment for horizontal and inclined positions - Continuous flat grinding surface for optimal machining of long workpieces - Consistent belt tension thanks to spring-loaded tensioning device - Versatile use for grinding edges, surfaces, and for cylindrical grinding - Includes quick-release system for fast belt changes - Easy adjustment of parallel belt run via adjusting screw - Graphite coating on the flat grinding surface improves sliding properties of the abrasive belt Cedjfnr Aijpfx Aahepw Scope of delivery: - Abrasive belt K 80 - Folding safety guard - Grinding and support table - Workpiece stop - Dust extraction port - Separate emergency stop button - Base frame

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 732335740, Mobile jaw crusher on crawler tracks The Diablo crusher is the most advanced machine in the 30-tonne class. Equipped with next-generation control and operating systems, it is simple, user-friendly, and environmentally friendly. The HCS control system (Hydraulic Crushing System) actively supports automatic machine operation, ensuring maximum profitability in terms of maintenance costs and productivity, making it truly unique. The structural reinforcement between the frame and the crusher provides the machine with maximum robustness against stress. The special design of the supporting structure ensures excellent access to all machine components during maintenance. Production capacity: approx. 220 tons/hour Patented HCS system Proportional distributor with "Load Sensing" for system optimization and reduction of fuel consumption by approx. 30%. Optional pre-screen available Hydraulically adjustable jaw gap, even during crushing operation Rapid locking system with wedges and folding cylinders Discharge height: 3,000 mm Dust extraction Cpjdpfx Aehd I Sxeahjw Fuel pump Magnetic separator Warranty: 1 year or max. operating hours from commissioning of the plant Technical data: Jaw crusher: 1000 x 600 mm Jaw gap: 40 to 170 mm Feed hopper: 4 m³ – 1820 x 3700 mm Grizzly feeder version: 900 x 3300 mm Main conveyor: 800 x 9,600 mm 4-cylinder diesel engine with constant speed, 82 HP / 60 kW, emission stage V Control panel Crawler tracks: 400 x 2,920 mm Weight: kg Transport length: 12,500 mm Transport width: 2,530 mm Transport height: 3,150 mm Further information: Intended use: Construction General condition: Very good Technical condition: Very good Optical condition: Very good Delivery terms: EXW,

Gamybos metai: 1960, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and center of gravity offset 300 mm: 10 t Load capacity with vertical faceplate position and center of gravity offset 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed, hydraulically steplessly adjustable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range up: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor level: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Codecblc Sspfx Aahepw Weight approx.: 3.5 t Counterweight weight: 2.3 t

Būklė: naujas, Gamybos metai: 2026, NEW TO THE MARKET! Universal belt grinder with comprehensive standard equipment and the ability to work both vertically and horizontally. - Easy and quick belt change - Fast and simple adjustment of grinding angle - Rapid change of head position within the vertical-horizontal range Machine Features: Cpedpfx Aaevu Ukhshew Universal belt grinder equipped with extensive standard features, allowing operation in both vertical and horizontal positions. - Easy and quick sanding belt replacement - Fast and simple adjustment of grinding angle - Quick change of head position between vertical and horizontal modes Machine Characteristics: - Stepless speed control with rotation indicator - 550W brushless motor - Vibration-damping shock absorber for smoother operation, adjusting belt tension and contact pressure against the workpiece - Aluminium drive wheel - Aluminium, ball-bearing guide rollers - CE-compliant belt guards - Steel supports for precise clamping of the workpiece to the belt Technical Data: Power supply: 230V Motor: 0.55 kW Belt speed: 12–34 m/s Belt dimensions: 50x1000 mm Weight: 20 kg Dimensions: 440x340x420 mm

Būklė: naujas, Cutting diameter: 225 mm Saw band length: 2480 mm Cutting width: 250 mm Cutting speed: 45 / 90 m/min Saw band dimensions: 2480 x 27 x 0.9 mm Cutting capacity at 45°: flat 135 x 185 - 145 x 150 mm Cutting capacity at 45°: round 150 mm Cutting capacity at 45°: square 145 mm Cutting capacity at 60°: flat 63 x 107 - 69 x 90 mm Cutting capacity at 60°: round 70 mm Cutting capacity at 60°: square 70 mm Cutting capacity at 90°: flat 240 x 160 - 250 x 110 mm Cutting capacity at 90°: round 225 mm Cutting capacity at 90°: square 185 mm Total power requirement: 0.75 / 1.1 kW Machine weight approx. 200 kg Space requirement approx. 1385 x 580 x 890 mm Technical Features: - Hydraulic system for controlled downfeed of the saw head - Automatic cut-off at end of cut - Powerful three-phase induction motor with 2 speeds and oil-bath gearbox - Saw bow, vise, and swivel components made of cast steel - Steel band guides with ball bearings - Quick-release vise - Front lever for locking the mitre adjustment Cpjdpfx Aaolb I Dashew - Coolant pump with aluminium housing - Large handwheel for easy blade tensioning - Pressure gauge to display band tension (600–1000 kg/cm³) - Emergency stop safety switch - Chip brush for cleaning the saw band STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank - Electric coolant pump - Length stop for serial cuts - Tools for blade change and adjustments - Chip removal brush - Hydraulic cylinder with feed control

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2007, veikimo valandos: 70 000 h, valdymo tipas: CNC valdymas, automatizacijos lygis: pusiau automatinis, lazeri tipas: CO₂ lazeris, lazdo šaltinio gamintojas: Mitsubishi, lazero valandos: 14 000 h, lazerio galia: 4 000 W, lazerio bangos ilgis: 10 600 nm, maks. lakšto storis: 20 mm, plieno lakšto storis (maks.): 20 mm, nerūdijančio plieno lakšto storis (maks.): 20 mm, aliuminio lakšto storis (maks.): 20 mm, stalo ilgis: 3 050 mm, darbinis ilgis: 3 000 mm, darbinis plotis: 1 500 mm, X ašies eiga: 3 020 mm, Y ašies eiga: 1 520 mm, Z ašies eigos atstumas: 50 mm, galia: 4 kW (5,44 AG), įėjimo įtampa: 380 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, aušinimo tipas: vanduo, suslėgto oro jungtis: 8 juosta, bendras svoris: 12 000 kg, bendras ilgis: 12 000 mm, bendras plotis: 3 000 mm, bendras aukštis: 2 500 mm, paskutinio kapitalinio remonto metai: 2023, Įranga: CE žymėjimas, apsaugos šviesos užtvara, aušinimo blokas, avarinis stabdymas, centralizuota tepimo sistema, dokumentacija / vadovas, dulkių šalinimas, dūmų ištraukimas, Machine: AMADA LC-3015 X1 NT Laser resonator: ML40CFX / 4 kW Exhaust system: Herding – Delta Comp 1500-6/9 SB Cpodpfx Asu Stk Eeahow Chiller: Riedel – PC 1001.1MS5.I Operating hours: see photo Last maintenance: 10/2023

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 472684923, Gasparin Jaw Crusher GI107CV Vesuvio Mobile jaw crusher on crawler tracks The GI107 VESUVIO mobile crusher stands for versatility and can be configured in two different variants. Equipped with a Grizzly vibrating feeder (GI107C), it is suitable for more traditional applications; with a vibrating feeder and pre-screen, the machine (GI107CV) is ideal for more demanding applications with high fine content and high material moisture. With the standard patented HCS System (Hydraulic Crushing System), VESUVIO is the best solution for the requirements of professionals and rental companies. Production capacity: approx. 320 t/h Patented HCS System Proportional distributor with "Load Sensing" for system optimization and reduction of fuel consumption by approx. 30% Hydraulically adjustable crusher gap even during operation Quick-release wedge and cylinder locking system Discharge height: 3000 mm Dust extraction system On-board fuel pump Magnetic separator 1 year warranty or up to maximum operating hours from plant commissioning Technical data: Jaw crusher: 1020 x 700 mm Crusher gap: 45–180 mm Feed hopper: 5 m³ – 2000 x 3960 mm Two-deck vibrating screen: 1020 x 1800 mm Cpsdpfx Aohd I Rzoahjw Main conveyor belt: 800 x 9600 mm 4-cylinder diesel engine with constant speed, 82 HP/60 kW, emission stage V Control panel Crawler tracks: 400 x 3310 mm Weight: kg Transport length: 12,900 mm Transport width: 2,530 mm Transport height: 3,200 mm Further information Application: Construction Overall condition: very good Technical condition: very good Visual condition: very good