Optimizavimo skersavimo pjūklas Stromab TR 500, 2016 metų

Stromab TR 500

Būklė: naujas, Gamybos metai: 2026, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness 10 mm Work table inclined by 8° Technical specifications of the cutting unit: Pneumatic up-cut saw TR500 Nodpfx Ashw Ng Iobbjwf Motor power 10 HP (7.5 kW), 400 V / 50 Hz TCT saw blade diameter 500 mm, F=30 Z=144 S=4.6 Cutting cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for package weight up to 80 kg Maximum push feed speed 90 m/min Pneumatic lifting of pusher at end of cutting cycle and overhead return Data input management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Load and save machine parameters via USB port Edit and enter cutting cycles (patterns) directly at the controller Transfer of cutting lists created on PC via USB or Ethernet port Operating software: Manual input of stack length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, order, and board sequence) Up to 1000 cutting lists with 11 lengths each, or one list with 10,000 consecutive lengths 'OPTI' package: automatic board length detection and full optimization Piece length reading via photocell Cutting cycle with 6 optimization criteria (longest length, order, board sequence, volume, minimal waste, and priority length) 'OPTI PLUS' package: total optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: 'OPTI PLUS' package: for knot and defect removal Photocell for detecting knots and defects during wood mapping Marking with fluorescent chalks/crayons (Note: only orderable in combination with ZA250) Pneumatic side clamping device Program for creating lists on the PC in XML format

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, RANDEK forgó keresztvágó fűrész Nsdpevryhgefx Abbewf

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 241306, pjūklo disko skersmuo: 500 mm, pjovimo aukštis (maks.): 170 mm, pjovimo plotis (maks.): 395 mm, galia: 7,5 kW (10,20 AG), gręžinio skersmuo: 30 mm, TECHNINĖ INFORMACIJA Didžiausias pjovimo plotis: 395 mm Didžiausias pjovimo aukštis: 170 mm Mažiausias pjūklo disko skersmuo: 490 mm Didžiausias pjūklo disko skersmuo: 500 mm Pjūklo disko tvirtinimo skylės skersmuo: 30 mm Įvedimo stalo ilgis: 5.640 mm Išvedimo stalo ilgis: 1.180 mm Pateikimo greitis: automatinis ĮRANGOS DUOMENYS Nwodpfx Asy Akvnsbbef Įtampa: 400 V Srovės vartojimas: 16,5 A Saugiklis: 32 A Galia: 7,5 kW Transporto svoris: 800 kg Transportavimo pakuotės: 3 KOMPLEKTACIJA Automatinė medžiagos padavimo sistema

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, veikimo valandos: 1 234 h, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 7 000 mm, padavimo eiga Y ašimi: 600 mm, padavimo ilgis Z ašis: 250 mm, X ašies padavimo greitis: 80 m/min, bendras ilgis: 8 000 mm, bendras aukštis: 1 800 mm, bendras svoris: 2 000 kg, pjūklo disko skersmuo: 500 mm, disko skersmuo: 500 mm, stalo ilgis: 7 000 mm, Įranga: USB jungtis, Parduodama optimizavimo pjovimo staklė STROMAB MATRIX TR 500 labai geros techninės būklės, naudota nedideliame gamybos ceche, daugiausiai statybinei medienai pjauti. Naudota karkasinių namų surinkimui. Staklės visiškai tvarkingos, prižiūrėtos. Paruoštos darbui be papildomų investicijų. Parduodama su PVM sąskaita faktūra. VIETOJE GALIMA IŠBANDYTI Nwjdpfx Aswp Rvhjbbof KAINA derinama.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, garantijos trukmė: 12 mėnesiai, Įranga: kabina, Paint/Spray Booth !! Always a brand-new machine (Photos from customer installations). We are the manufacturer. !! The Reinox 450×235 paint booth is the ideal solution for painting large components and series production. Thanks to its robust design, powerful extraction system, and ATEX certification, it provides safe operation even in explosion-hazardous environments. The booth is equipped with a high-performance fan featuring a frequency inverter, enabling stepless suction adjustment to meet current needs. The three-stage filtration system keeps the workspace clean and ensures high-quality surface finishing. Technical specifications: - Fan certified for ATEX Zone 22 Nwsdpfxeia Taxo Abbjf - Extraction area: 4,500 × 1,900 mm - Overall dimensions: approx. 4,600 × 2,350 × 1,910 mm - Fan output: 4 kW (ATEX version) - Suction capacity: approx. 20,000 m³/h - Power supply: 400 V, three-phase - Control: Frequency inverter – stepless power adjustment via potentiometer on control panel - Filtration: Three-stage (dry or wet option available as required) - Certifications: CE, ATEX Warranty: 12 months Machines can be ordered in a variety of customized configurations and dimensions! Please feel free to contact us.

Būklė: naudotas, Gamybos metai: 2022, bendras aukštis: 1 700 mm, bendras ilgis: 10 000 mm, bendras plotis: 1 800 mm, Svoris: 1.100 kg Kaina: pagal užklausą - Pagaminimo metai: 2022 - Dokumentacija prieinama: Ne - CE žymėjimas: Taip Nedpfx Abjyna Enebowf - CE sertifikatas: Ne - Serijos numeris: 8737 - Maksimalus pjūklo ašmenų ilgis [mm]: 6000 - Maksimalus pjūklo ašmenų plotis [mm]: 300 - Minimalus pjūklo disko skersmuo [mm]: 490 - Maksimalus pjūklo disko skersmuo [mm]: 500 - Pjūklo disko ašies skersmuo [mm]: 30 - Įvado stalo ilgis [mm]: 7000 - Išvado stalo ilgis [mm]: 2000 - Parinktys: Automatinė padavimo sistema - Įtampa [V]: 400 - Srovės sąnaudos [A]: 20 - Saugiklis [A]: 32 - Transportavimo matmenys: 10000mm x 1800mm x 1700mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 1100kg - Transporto pakuočių kiekis [vnt.]: 3 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/PVM skirtumo apmokestinimas: PVM atskaitomas verslams Pristatymas ir mainai galimi visiems pramonės sektoriaus įrenginiams Yorick Diebels

Būklė: naudotas, Gamybos metai: 2005, bendras aukštis: 1 750 mm, bendras ilgis: 1 350 mm, bendras plotis: 1 350 mm, Optimizuojanti skerspjovimo pjūklas Stromab TR 500 Matrix 4 4000 Pagaminimo metai: 2005 Variklio galia: 10 AG Automatinė stūmimo sistema Rašalinis spausdintuvas - Pagaminimo metai: 2005 - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra Nwjdewq U Dxopfx Abbof - Serijos numeris: 250143 - Pagrindinio variklio galia [kW]: 7,5 - Didžiausias pjovimo plotis [mm]: 375 - Ašies pjūklo disko skersmuo [mm]: 30 - Padavimo stalo ilgis [mm]: 4300 - Išleidimo stalo ilgis [mm]: 2000 - Transportavimo matmenys: 1350mm x 1350mm x 1750mm (i x p x a) - Transportavimo paketų kiekis [vnt.]: 3 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/Diferencijuotas apmokestinimas: PVM atskaitomas verslui Pristatymas ir pramoninių įrenginių išpirkimas galimi bet kuriuo metu

Būklė: naujas, Vollautomatische Blockschneidemaschine für Palettenfüße. Maximale Rohmateriallänge: 6 m. Die Maschine ist für alle Arten der Palettenproduktion geeignet. Die OKKR-2006 kann als eigenständige Maschine betrieben oder in eine Produktionslinie integriert werden. Funktionsweise: Das Blockmaterial wird der Maschine über das Ketteneinlaufband zugeführt. Die Zuführung erfolgt vollautomatisch und die Maschine schneidet die Blöcke auf die voreingestellte Länge. Die OKKR-2006 kann programmiert werden, um mehrere unterschiedliche Blocklängen aus einem Stück Rohmaterial zu schneiden. Die maximale Rohmateriallänge beträgt 6 m. Nedpfx Ajwdutmebbewf Abmessungen des geschnittenen Blocks: Min./Max. Länge: 600 mm – 6.000 mm Min./Max. Breite: 75 mm – 150 mm Min./Max. Stärke: 75 mm – 100 mm Technische Daten: Bedienpersonal | 0 Länge | 7,5 m Breite | 2,5 m Höhe | 1,8 m Leistung | 7 kW, 3x400 V+N Pneumatik | 7 bar, getrocknete Druckluft: 450 l/min Wartung | Schmierstellen müssen regelmäßig befüllt und kontrolliert werden Maschinenleistung | 36 Blöcke/min Standardausstattung: 1 Elektromotor für das Sägeblatt 1 Elektromotor für den Materialeinlauf 1 Elektromotor für die Kettenzuführung Mychrome bietet verschiedene Zusatzmodule an, die einfach an bestehende Maschinen angedockt werden können, um einen höheren Automatisierungsgrad zu erreichen. Die Möglichkeit zur Änderung der Palettenkonstruktion und -größen bleibt auch mit Zusatzeinheiten vollständig erhalten.

Būklė: naudotas, Gamybos metai: 2007, mašinos/transporto priemonės numeris: 1377, STROMAB TR 500 PNEUMATIC MITRE SAW – CE CERTIFIED – USED - equipped with 4000mm TIGERSTOP electronic positioning stop - 4500mm infeed roller table - 4500mm outfeed roller table - 500 mm diameter blade Njdpfxjt U Izpe Abbowf - maximum cutting capacity: 360 mm (W) at 60 mm (H), 135 mm (H) at 280 mm (W) - 10 HP motor - 415 volts - serial no. 1377 - year: 2007

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 0x0x0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully optimized automatic cross-cut saw TR-500 MATRIX-6000 - Motor drive power: 7.5 kW - Saw blade diameter: 500 x 30 mm Z=144 Nwodjv A Htdepfx Abbof - Cutting capacity according to cutting diagram - Cutting capacity 135 x 280 mm - Cutting capacity 125 x 295 mm - Cutting capacity 95 x 325 mm - Cutting capacity 80 x 340 mm - Cutting capacity 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cutting unit - 8° inclined worktable - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 1000 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x diameter 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Air velocity at center of extraction port: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min. - Drive by brushless servomotor - Feed system with precision rack and pinion, measurement by servomotor - Pneumatic pusher lift at end of cycle and upper return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection - Marking with fluorescent chalk - 8° inclined working surface - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Cutting list creation directly via machine control - Up to 1000 cutting lists with 10 sizes each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard USB and Ethernet ports - Including OPTI function for automatic measuring of the workpiece to be cut. Optimal solution for processing material with variable lengths, for single or bundle feeding - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, priority) - Including OPTI PLUS function for mark detection, enabling full optimization and removal of knots and defects - Marking with chalk Option: - Pneumatic side clamp €850.00 - Cutting list creation via PC €360.00 - Outfeed table €360.00/m

Būklė: naujas, Gamybos metai: 2025, MAMMUT SYSTEM: High-speed log profiling line (up to 600 mm diameter) for the production of squared timber, 'uso fiume' beams, 'uso Trieste' beams, general lumber, and semi-finished products for pallets. Nwedpshpbthjfx Abbjf FULLY HYDRAULIC MACHINE Minimum log diameter: 120 mm Maximum log diameter: 600 mm Minimum working length: 1800 mm Maximum working length: 'Infinite' (∞) Tool spindle diameter: 60–80 mm Cutter diameter: 300 mm Feed speed: 5 – 70 m/min

Būklė: naudotas, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw featuring a pneumatic saw blade feed and a blade diameter of 500 mm. This machine is ideal for precise and efficient cross-cutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 — Technical Data • Maximum cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Compliance marking: CE mark • Weight: approx. 420 kg — Condition & Delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on pallet by freight forwarder available at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and errors excepted. Nwedjxiza Ujpfx Abbjf