Kryžminio pjovimo pjūklo optimizavimas

STROMAB TR-500 MATRIX-6000

Būklė: naujas, Gamybos metai: 2026, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness 10 mm Work table inclined by 8° Technical specifications of the cutting unit: Pneumatic up-cut saw TR500 Motor power 10 HP (7.5 kW), 400 V / 50 Hz TCT saw blade diameter 500 mm, F=30 Z=144 S=4.6 Cutting cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for package weight up to 80 kg Lodpfxohw Ng Io Aausaa Maximum push feed speed 90 m/min Pneumatic lifting of pusher at end of cutting cycle and overhead return Data input management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Load and save machine parameters via USB port Edit and enter cutting cycles (patterns) directly at the controller Transfer of cutting lists created on PC via USB or Ethernet port Operating software: Manual input of stack length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, order, and board sequence) Up to 1000 cutting lists with 11 lengths each, or one list with 10,000 consecutive lengths 'OPTI' package: automatic board length detection and full optimization Piece length reading via photocell Cutting cycle with 6 optimization criteria (longest length, order, board sequence, volume, minimal waste, and priority length) 'OPTI PLUS' package: total optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: 'OPTI PLUS' package: for knot and defect removal Photocell for detecting knots and defects during wood mapping Marking with fluorescent chalks/crayons (Note: only orderable in combination with ZA250) Pneumatic side clamping device Program for creating lists on the PC in XML format

Būklė: naudotas, Gamybos metai: 2006, naudotas, puikios būklės mažai naudotas Lodpfxex Nqvhe Aaueaa iš institucijos Gamintojas: Alko Modelis: Power Unit 300 P gamybos metai: 2006 Švaraus oro įrenginys / neigiamas slėgis GS dulkių patikra CE tipo patikra Variklis – 7,5 kW Jungties diametras: 300 mm Slėgis: 2400 Pa Oro našumas: 6000 m³/h Surinkimo talpos: 900x600 Filtro žarnų plotas: 30 m² Filtro valymas automatinis/pneumatinis Filtro slėgio daviklis garso izoliacija integruota gesinimo sistema Nauja kaina apie 19 545 EUR Reikalinga vieta apie 3000x1058x2361 mm Svoris apie 880 kg Sandėlio vieta: 97447 Gerolzhofen, laisvai pakrauta, be pakuotės Perduodama esamos būklės, kaip apžiūrėta, be garantijos ir atsakomybės.

Būklė: geras (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 265864, tekėjimo skersmuo: 350 mm, veleno greitis (maks.): 5 000 aps./min, veleno greitis (min.): 35 aps./min, X ašies eiga: 195 mm, Z ašies eigos atstumas: 560 mm, ašies variklio galia: 15 W, X ašies padavimo greitis: 30 m/min, padavimo greitis Z ašis: 33 m/min, sukimo momentas: 233 Nm, atstumas nuo stalo centro iki veleno galo: 687 mm, Įranga: dokumentacija / vadovas, Mazatrol Smart valdymas. Veleno apsisukimų dažnis – 5000 aps./min. X/Z ašies eiga – 195 mm/560 mm. Sumontuotas 215 mm skersmens elementas. 3 žandikaulių varoma griebtuvas. Ljdjvfm H Aopfx Aauoaa 12 pozicijų revolverinė galvutė. Kontrcentras. Įrankių matuoklis. Detalių gaudyklė.

Būklė: geras (naudotas), Gamybos metai: 1994, 2-sided planer, top and bottom Laodjhuthyopfx Aauoa Constant table height (consistent infeed height) Max. planing width: 600 mm Max. planing height: 280 mm Planer heads with strip knives Immediately ready for operation

Gamybos metai: 2001, būklė: paruoštas naudoti (naudotas), Maks. pjovimo jėga: 220kN, lazerio galia: 3200W, azoto prijungimas: 30bar, deguonies prijungimas: 20bar, pajungimo galia: 76kVA, darbo valandų skaičius 2025 m. pradžioje: 67 766h, su Trumpf TLF 3200 lazeriu ir RIEDEL L 15/21 TR3/19.00 šaldytuvu, šaltnešis: R134a, užpildymo kiekis: 11,5kg, aukštas slėgis: 20,2bar. Papildomi įrankiai prieinami. Apžiūra vietoje galima. Laodpfew Uk A Rjx Aauoa

Būklė: naujas, Gamybos metai: 2026, Extraction capacity ~ 8,900 m³/h Lasdpev Dvbajfx Aausa Motor power 7.5 kW Speed 3,000 rpm Rated voltage 400 V, 50 Hz Exhaust pipe 300/200 mm Extraction velocity 28 m/sec. Number of filters 45 Filter category G Filter material Polyester Noise level 80 dB without connection / 65 dB when connected to the machine via duct Filter area 22 m² Dimensions 920 x 2,260 x 2,250 mm Weight 450 kg Vacuum 3,000 Pa 3-micron polyester filter 2 containers Undercarriage Filter cleaning by vibration system with control + €850 for model with fire extinguishing system (Safe System) + €550 for inverter model (variable speed control)

Būklė: naudotas, Gamybos metai: 2018, Būklė: naudota Pagaminimo metai: 2018 Sandėlio numeris: 080197 Pristatymo laikas: iš karto, su tarpine pardavimo galimybe Kilmės šalis: Vokietija Sandėlyje: 1 vnt. Lenkimo ilgis: 4010 mm Lenkimo pajėgumas plienui 400 N/mm²: 1,25 mm Lenkimo pajėgumas aliuminiui 190 N/mm²: 2 mm Pjovimo našumas elektrinėmis žirklėmis: 1,25 mm Stovo spaudimo svirčių vienetų skaičius: 4 Varomų lenkimo elementų skaičius: 4 Įstatymo gylis: 1130 mm Darbinis aukštis: 915 mm Variklis: 2,2 kW Ilgis su elektrinėmis žirklėmis: 5240 mm Plotis: 1435 mm Aukštis: 1950 mm Svoris: 2600 kg Hidraulinė pavara Standartinis valdymas Papildoma liniuotė lenkimo balkyje Dvigubas kojinis jungiklis Atstatoma skardos grotelė Vandens lašinimo griovelis Laedpfjyvvmfox Aauja Saugos įranga pagal BG bandymų principus Naudojimo instrukcija vokiečių kalba su CE atitikties deklaracija Kokybė: pagaminta Vokietijoje

Būklė: naudotas, Gamybos metai: 2014, Stromab CT600 Automatische Aufwärtssäge für gerade und winklige Schnitte – Baujahr 2014, CE-zertifiziert Einlaufkapazität: 6000 mm Auslauftisch: 2000 mm 12" Touchscreen-Grafikdisplay Power 1000 Steuerung Fernprogrammierung der Schnittliste über den farbigen Grafik-Touchscreen-Controller – Anschluss via USB-Stick 5 Optimierungsfunktionen: längstes Maß, minimaler Verschnitt, Prioritätsmaß, nach Volumen oder nach Wert Eingabe der Schnittliste über das Tastenfeld des Controllers Grafische Darstellung des Werkstücks 10 PS Motor Zahnstangenantrieb für den Vorschub mit magnetischem Messstreifen für höchste Wiederholgenauigkeit Sägeblattdurchmesser: 600 mm SCHNITTLEISTUNG POSITION A) # max. Schnitthöhe Bei 0°: 200 x 215 mm oder 50 x 370 mm Bei 30°: 200 x 185 mm oder 50 x 325 mm Bei 45°: 200 x 150 mm oder 50 x 265 mm SCHNITTLEISTUNG POSITION B) # max. Schnittbreite Bei 0°: 160 x 315 mm oder 40 x 410 mm Ledpfx Aowl Hyujausaa Bei 30°: 160 x 270 mm oder 40 x 350 mm Bei 45°: 160 x 220 mm oder 40 x 285 mm Verstellbarer Gehrungswinkel: –70°, 0°, +70° Einstellbare Vorschubgeschwindigkeit der Säge Vertikale Spannung Horizontale Spannung Absauganschlüsse: 1x 100 mm, 1x 120 mm Plexiglashaube mit Gasdruckfedern Baujahr: 2014, CE-zertifiziert

Būklė: naujas, Gamybos metai: 2026, Thanks to many years of experience of our CORMAK team, the DCV series extractors in the TC Viber version have been developed. The design of a new technological line has enabled us to create top-class extractors. Advantages: - Equipped with an additional pair of doors for easier bag replacement - The DCV 6500TC extractor marks another milestone in the production of efficient dust and chip extractors, designed to maintain consistent extraction parameters throughout the entire work cycle - The new TC series offers a fully enclosed upper housing that absorbs noise and vibrations during operation, as well as the ability to return warm air - Maintenance-free filter shaking system with the option for automatic operation - Newly patented safety system ensures reliable operation of the device - Durable, robust construction ensures quiet and vibration-free operation of the extractor - Compact footprint, yet capable of filtering large amounts of dust and chips - Powerful and quiet fan provides high negative pressure performance - Reliability confirmed by manufacturing facilities coping with high daily workloads - Specially designed impeller blades make the units more efficient and effective, also contributing to energy savings - Very high tightness of the entire suction system guarantees the highest indoor air quality and, during the heating season, prevents heat loss - Large filter area - Possibility to build an overhead system connecting several machines operating simultaneously with DCV 6500 extractors - Fast replacement of waste bins, designed to maintain 99.99% system airtightness - Metal waste bins with mobile running gear for easy and trouble-free movement. Also equipped with a sight glass to check the fill level of the containers - Low-noise operation and high efficiency ensured by a balanced metal impeller and upgraded motor - Provides perfection and cleanliness at the workstation, directly impacting the quality of your products - Excellent cooperation with machines such as sanders, edgebanders, panel saws, etc. Lodpeuc U N Ujfx Aaujaa - Control cabinet for switching the device on/off - We guarantee high purification quality! - Polyester filter traps dust down to 5 microns; for filtering smaller particles, use e.g. a HEPA filter - Do not use this extractor in explosive atmospheres - The extractor is intended for use in the woodworking industry with sawdust, chips, and dust (not suitable for wet material such as wet sawdust) - Before starting the extractor, remove the lower beam to allow access to the chip containers - MADE IN POLAND Technical specifications: MOTOR POWER (CONTINUOUS S1): 5.5 kW / 400 V, 50 Hz SPEED: 2900 rpm EXTRACTION CAPACITY: 6500 m³/h SUCTION PORT DIAMETER: 280 mm SUCTION SPEED: 28–32 m/s FILTER AREA: 16 m² FILTER MATERIAL: Polyester, 5 microns NUMBER OF FILTERS: 32 WASTE BIN CAPACITY: 500 L DIMENSIONS: 2440 x 930 x 2270 mm WEIGHT: 440 kg

Gamybos metai: 2007, būklė: paruoštas naudoti (naudotas), Pjovimo sritis apvaliems ruošiniams: 560 mm, pjovimo sritis plokštiems ruošiniams (P x A): 620x560 mm, ruošinio padavimo ilgis, vienkartinis: 900 mm, daugkartinis padavimas: 9999 mm, trumpiausias ruošinio ilgis: 6 mm, mažiausias pjaunamas skersmuo: 15 mm, minimalus likutinis gabalas vienetiniam pjūviui: 15 mm, trumpiausias likutinis gabalas automatiniame režime: 80 mm, pjaunamosios variklio galia, reguliuojama dažniu: 5,5 kW, pjovimo greitis, bepakopis: 13-127 m/min, pjovimo juostos matmenys: 7400x54x1,6 mm, ruošinio atramos aukštis: 700 mm, bendra variklio galia bazinėje komplektacijoje: 12 kW, ilgis: 2370 mm, plotis: 3610 mm, bendri matmenys su drožlių transporteriu (IxP): 2370x3610 mm, nuleisto stalo aukštis: 2230 mm, svoris: apie 5,2 t, su drožlių transporteriu. Galima apžiūra vietoje. Lodpoxg Rhvsfx Aaueaa