PNEUMATINĖS PJOVIMO STAKLĖS

Stromab TR 500

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 0x0x0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully optimized automatic cross-cut saw TR-500 MATRIX-6000 - Motor drive power: 7.5 kW - Saw blade diameter: 500 x 30 mm Z=144 - Cutting capacity according to cutting diagram - Cutting capacity 135 x 280 mm - Cutting capacity 125 x 295 mm - Cutting capacity 95 x 325 mm - Cutting capacity 80 x 340 mm - Cutting capacity 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cutting unit - 8° inclined worktable - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 1000 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x diameter 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Air velocity at center of extraction port: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min. - Drive by brushless servomotor - Feed system with precision rack and pinion, measurement by servomotor - Pneumatic pusher lift at end of cycle and upper return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection - Marking with fluorescent chalk - 8° inclined working surface - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Cutting list creation directly via machine control - Up to 1000 cutting lists with 10 sizes each - Single list with 10,000 dimensions in sequence Gijdpsv A Htdefx Abdsl - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard USB and Ethernet ports - Including OPTI function for automatic measuring of the workpiece to be cut. Optimal solution for processing material with variable lengths, for single or bundle feeding - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, priority) - Including OPTI PLUS function for mark detection, enabling full optimization and removal of knots and defects - Marking with chalk Option: - Pneumatic side clamp €850.00 - Cutting list creation via PC €360.00 - Outfeed table €360.00/m

Sąlyga: geras (naudotas), Gamybos metai: 2008, mašinos/transporto priemonės numeris: 21100122-F, Offer 25108 Technical Specifications: - Saw blade dimensions: 350 x 3.4 x 32 mm - Saw blade speed: 3,400 rpm - Cutting range at 90° (round): 120 mm - Cutting range at 90° (flat): 105 x 105 mm or 180 x 70 mm Gsdpfx Abowq N Swjdeil - Cutting range at 45° (round): 110 mm - Cutting range at 45° (flat): 135 x 60 mm - Mitre adjustment to both left and right: 45° - Tilt-adjustable mitre head for compound cuts to the left - Pneumatic vices - Discharge roller conveyor with length stop: 2,000 mm - Infeed roller conveyor: 3,000 mm - Drive: 400 V / 2.2 kW - Space requirement (approx.): W 600 x H 1,730 x D 1,200 mm - Weight (approx.): 180 kg

Sąlyga: naudotas, Gamybos metai: 2016, bendras aukštis: 1 600 mm, bendras ilgis: 14 100 mm, bendras plotis: 1 600 mm, Svoris: 2.500 kg - Pagaminimo metai: 2016 - Dokumentacija prieinama: Taip - CE ženklinimas yra: Taip - CE sertifikatas yra: Ne - Serijos numeris: 6237 - Įtampa [V]: 415 - Srovės suvartojimas [A]: 20 - Transportavimo matmenys: 14100 mm x 1600 mm x 1600 mm (i x p x a) - Transportavimo svoris [kg]: 2500 kg - Transportavimo paketų skaičius [vnt.]: 4 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / maržos apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir mainai bet kada galimi visiems pramoniniams įrenginiams. Yorick Diebels Gisdpfxjwnh N Ne Abdel

Sąlyga: naudotas, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw featuring a pneumatic saw blade feed and a blade diameter of 500 mm. This machine is ideal for precise and efficient cross-cutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 — Technical Data • Maximum cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Compliance marking: CE mark • Weight: approx. 420 kg — Condition & Delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on pallet by freight forwarder available at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and errors excepted. Giodpfoxiza Ujx Abdel

Gamybos metai: 1977, Sąlyga: visiškai atnaujintas (naudotas), I am selling a Rapid DGS double mitre saw, year 1977. Swivelling heads. Drilling heads on each side at the front included. In very good condition. Available immediately. Gijdpfed N Rb Dox Abdsl

Sąlyga: naujas, Gamybos metai: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Giedpfohw Ng Iex Abdsl Technical specifications of the saw unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400/50 Hz. TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system with brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for bundle weight up to 80 kg Maximum push feed system speed: 90 m/min Pneumatic lift of pusher at the end of the cutting cycle and overhead return. Data input management: 12-inch TOUCH SCREEN controller (800x600 Pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit cutting cycle (pattern) and enter directly at the controller Transfer cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of the stock length Partial optimization without measuring the panel length Cutting cycle with 3 optimization options (maximum length, sequence, and board order) 1000 cutting lists with 11 sizes each, or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length measurement via photocell Cutting cycle: with 6 optimization criteria (longest length, sequence, board order, volume, minimal waste, and priority length) "OPTI PLUS" package: overall optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects during timber mapping Marking with fluorescent chalks (Note Ð Only available in combination with ZA250) Pneumatic side clamping device

Sąlyga: naudotas, Gamybos metai: 2005, bendras aukštis: 1 750 mm, bendras ilgis: 1 350 mm, bendras plotis: 1 350 mm, Kaina: pagal užklausą Optimizuojantis kapavimo pjūklas Stromab TR 500 Matrix 4 4000 Metai: 2005 Variklio galia: 10 AG Automatinė išstūmimo sistema Rašalinis spausdintuvas - Pagaminimo metai: 2005 - Dokumentacija: nėra Gisdpfswq U Dxsx Abdsl - CE sertifikatas: nėra - Serijos numeris: 250143 - Pagrindinio variklio galia [kW]: 7,5 - Maks. pjovimo plotis [mm]: 375 - Veleno pjūklo disko skersmuo [mm]: 30 - Patiekimo stalo ilgis [mm]: 4300 - Išleidimo stalo ilgis [mm]: 2000 - Transportavimo matmenys: 1350mm x 1350mm x 1750mm (ilgis x plotis x aukštis) - Transporto pakuotės [vnt.]: 3 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir atpirkimas galimi bet kokiai pramoninei įrangai. Yorick Diebels

Sąlyga: geras (naudotas), Gamybos metai: 1991, Braun Canali band saw, model TB 1100 Unimaster, wheel diameter 1100 mm, with tilting table for diagonal cuts. Machine dismantled, available from our warehouse in 23936 Grevesmühlen. Godpfeucnt Hsx Abdjil

Sąlyga: naujas, Gamybos metai: 2025, Working width: 400 mm Giodpfx Abei Ezrzsdol Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable Brush lift height: 25 mm with pneumatic damping 1st brush: Metal brush, diameter 220 mm 2nd brush: Tynex brush, grit 80, diameter 220 mm Reversible direction: for both brushes Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Gamybos metai: 1989, Sąlyga: labai geros būklės (naudotas), Saw blade diameter: 350 Gisdpfjff Snbsx Abdjl