Universalios tradicinės įrankinės frezavimo staklės, X eigos diapazonas 0–399 mm pirkti naudotą (128)

Sąlyga: naudotas, Gamybos metai: 1989, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop-inspected Machine No.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function for X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant unit - Centralized electrical lubrication system - Operating manual Used, as seen, without warranty The machine corresponds technically Njder En Dyspfx Af Newb to the state of the art at the time of manufacture.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed – very good condition – CE compliant Technical Data: Nwedpfx Asxdi Ivsf Neb • Year of manufacture: 1992, Machine No. 2102-6209 • Rigid angle table (newly planed) • Spindle speed: 40 - 2000 rpm • Stepless feed in 3 axes • Rapid traverse in 3 axes • Drive power: 1.5 / 1.9 kW • Spindle brake • Travel distances X/Y/Z: 300 / 160 / 340 mm • Vertical milling head can be shifted 100 mm on spindle carrier • Vertical and horizontal quill – SK40 • Drawbar system M16 • Weight approx. 800 kg Accessories and Equipment: • 3-axis digital display Heidenhain TNC113 • Coolant system • Machine lamp • Operating manual, spare parts list About the Machine: For sale is a Deckel FP1 universal milling machine, CE compliant and in very good condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. A special feature is that the control cabinet is connected to the machine via a plug, which makes transport easier. On this newer FP1 model, the feed in all three axes is infinitely variable, and the machine also features rapid traverse on these axes. An important advantage is the active 3-axis digital display. With this Heidenhain distance controller, you can enter dimensions that the machine will move to automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test this machine under power on site.

Sąlyga: geras (naudotas), x eiga 300 mm y eiga 160 mm z eiga 360 mm Njdow U Shhepfx Af Newb Bendras galios poreikis 1 kW Mašinos svoris apie 0,8 t įvairūs graviravimo rinkiniai

Sąlyga: naujas, Technical Data: Nedpfx Afjd R S Ndo Njwb Fixed Angle Table: Clamping surface of the fixed angle table: 800 x 400 mm Max. table load: 200 kg Working Spindle: Tool holder horizontal and vertical: ISO 40 Main drive motor power / 100% duty cycle: 2.2 kW Vertical Milling Head: Speed range, stepped: (12) 50 – 2000 rpm Quill stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/manual: 385/400 mm Y-axis automatic/manual: 185/200 mm Z-axis automatic/manual: 365/380 mm Feeds: Feed range: 0–650 mm/min Number of feeds: steplessly adjustable Rapid traverse: 1000 mm/min Features: - Machine accuracy according to DIN 8615 - 3-axis digital readout FAGOR® Innova (option) - Spindle runout max. 0.005 mm, incl. test certificate to DIN 8615 (SKF®/NSK® precision bearings) - Vertical milling head can be swivelled for horizontal milling (without disassembly) - All key machine components, such as machine base, table, milling head, housing, etc., are made from stress-relieved MEEHANITE® quality cast iron (FC 30) and are heavily ribbed to maximize machine stability and working precision. All guideways are coated with TURCITE®-B - All machined surfaces in the working area, such as guides, table surfaces, T-slots, etc., are hardened and precision ground. - The powerful drive transmits the main motor’s power via belts to the gearbox. - All axes are equipped with separate DC servomotors, allowing for sensitive and stepless feed rate adjustment. Standard Equipment: - DC servo motors for all axes X/Y/Z, including electromagnetic brake - Fixed box table - Original Ganter Norm® safety handwheels - Chip collection tray - Backlash-free HIWIN® precision ball screws in all X/Y/Z axes - Gearbox for main spindle - Safety system according to CE or better: - Spindle guard with multiple micro limit switches, multi-adjustable (enclosure available as option) - Two emergency stop mushroom buttons (1x on machine base, 1x on operator panel) - Mechanical Ganter Norm® safety handwheels on all axes - Electromagnetic spindle brake (for immediate spindle stoppage) - Electrical overload protection on all axes - Electrical equipment by SIEMENS®, BALLUFF® - Brake system prevents table from dropping - Three reduction sleeves SK 40 to MK 1, 2, 3 - Collet chuck according to DIN 2080 incl. collet set (Ø 6, 8, 10, 12, 16, 20, 25 mm) - Draw-in thread spindle - Horizontal milling arbor (Ø27 mm) - Automatic central lubrication - Stainless steel lamella cover for the Z-axis guideway in the working area - Machine lamp - Coolant system integrated in machine base - Test certificate according to DIN 8615 - Operating tools - Machine according to CE - Operating manual, spare parts list, incl. electrical schematics etc.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1978, mašinos/transporto priemonės numeris: 32392, Table clamping surface: 560 x 240 mm X-axis travel: 300 mm Y-axis travel: 275 mm Nwsdpfx Afod Tfcio Njb Z-axis travel: 200 mm Spindle taper: ISO 40 Spindle speeds: 40 – 2000 rpm Operating voltage: 380 V Total power requirement: 1.1 kW Space requirement: 1200 x 1100 x 1700 mm Weight: approx. 750 kg

Sąlyga: geras (naudotas), Stalo dydis: apie 600 x 150 mm X/Y/Z eiga: apie 300 / 130 / 300 mm Veleno tvirtinimas: W20 Svoris: apie 600 kg Ašys juda sklandžiai, labai mažas laisvumas. Stalas pasukamas Nwedpfx Asxq Taief Nob Automatinė padava X ašyje Variklio stabdis Sukimosi greitis 100 – 2000 aps./min. Dėmesio: Informacija šiame puslapyje surinkta ir pateikta sąžiningai, tačiau jos tikslumas negarantuojamas. Todėl tai nėra oficialus pasiūlymas ar sutartis, rekomenduojame pasitikrinti visus svarbius duomenis. Finansinė informacija: PVM/antkainis: Antkainis: Rodoma kaina su PVM (PVM įmonėms neatskaitomas).

Sąlyga: naudotas, Gamybos metai: 1980, x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm Tool holder: SK40 Speed range: 40–2,000 rpm Control: HEIDENHAIN Aktiv Table size: 600 x 210 mm Total power requirement: 2 kW Nwodpfx Afjw A Apyj Neb Machine weight approx.: 0.73 t Required floor space approx.: LWH 1200 × 1100 × 1600 mm - Power feed in X and Z axis - Additional swiveling table 600 × 210 mm - Coolant system - Counter bearing for horizontal milling - Various tool holders, clamping devices, and cutters included - Operating manual

Sąlyga: naudotas, Gamybos metai: 1980, x-axis travel: 300 mm y-axis travel: 160 mm z-axis travel: 340 mm Tool holder: SK40 Spindle speed: 40-2000 rpm Control: Heidenhain Aktiv Table size: 600 x 210 mm Total power requirement: 2 kW Machine weight: approx. 0.73 t Space requirement approx. (LxWxH): 1200 x 1100 x 1600 mm - Powered feed on X and Z axes - Röhm vise - Coolant system - Various holders and clamping devices - Operating manual Nwodew A Ap Hjpfx Af Njb

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP4M with 3-axis Heidenhain Active digital readout – Excellent condition, CE compliant! Nedpfxou Tuk Hj Af Nowb Technical Data: >> Year of manufacture: 1992, Machine No. 2203-8449 >> Rigid angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travels (X/Y/Z): 500 / 400 / 400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical and horizontal quill - SK40 taper >> Vertical quill extendable by 90 mm >> Hydraulic clamping system >> Weight approx. 1,600 kg Accessories and Equipment: >> 3-axis active digital readout by Heidenhain >> Coolant system >> Chip tray >> Centralized electric lubrication >> Operation manual, spare parts diagrams About the machine: Offered here is a Deckel FP4M Active universal milling machine in excellent condition. The machine has minimal backlash and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine features hydraulic clamping. The FP4M has only been used occasionally in a governmental training facility. On this newer FP4 model, the feed rate is steplessly adjustable in all three axes, and there is rapid traverse available for each axis. A major advantage is the Heidenhain 3-axis active digital readout. With this Heidenhain position control, you can input dimensions which the machine then automatically moves to. An oil change has been performed; mechanically and electrically inspected. The Heidenhain digital readout system makes operation easier and even more precise. Take the opportunity to view and test this machine under power on site.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, Control: 3-axis active contouring control Heidenhain TNC 123 Spindle Speed: 40 - 2000 rpm, geometrically stepped direct-drive gearbox with 16 gear stages for maximum torque/milling performance Feed Rate: 5 to 500 mm/min, infinitely variable Nwodpfx Afev Nqu Ej Neb Rapid Traverse: 1.2 m/min Quill: Extendable quill, vertical 60 mm, SK40, M16 draw thread Axes (X/Y/Z): 300/160/340 mm Swivel Table: 600 x 210 mm, max. load 200 kg

Sąlyga: naudotas, x-axis travel: 700 mm y-axis travel: 250 mm z-axis travel: 300 mm Table size: 1000 x 230 mm Spindle mount: ISO 40 Njdpfsv T Nqyex Af Nowb Spindle speeds: 35–1500 rpm Total power requirement: 3.0 kW Machine weight: approx. 1.4 t Dimensions (L x W x H): 1.55 x 1.4 x 1.65 m Universal milling machine - Huron head - Mounting fixture for Huron head - Horizontal counter support - Documentation - Coolant system - Machine feet

Sąlyga: naudotas, Gamybos metai: 1985, x-eiga 400 mm y-eiga 180 mm z-eiga 300 mm Stalo dydis 760 x 200 mm Veleno tvirtinimas ISO MK 3 Veleno sūkių diapazonas 40 - 1800 aps./min. Pinolės eiga 80 mm Nwodpew Tdwrjfx Af Nob Bendras galios poreikis 1,2 kW Staklių svoris apie 0,38 t Matmenys I x P x A 1,75 x 1,65 x 1,9 m Gręžimo ir frezavimo staklės - X ašis be veleno - Centrinis tepimas

Sąlyga: naudotas, Gamybos metai: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm Table clamping surface 600 x 210 mm Spindle mount SK 40 Spindle speeds 40 - 2000 rpm Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Machine weight approx. 0.7 t - Machine from training workshop - Nwsdpfxjwwwr Ee Af Njb Accessories: fixed table, vertical head with extendable quill, 3-axis HEIDENHAIN digital readout, various short and long milling arbors, various collets, original DECKEL tool cabinet

Sąlyga: naudotas, Gamybos metai: 1989, X-axis travel: 350 mm Y-axis travel: 200 mm Z-axis travel: 350 mm Clamping surface of table: 700 x 280 mm Spindle taper: SK 40 Spindle speeds: 150 - 1660 rpm Feeds: 25 - 285 mm/min Rapid traverse: 1 m/min Nodpfxovzhids Af Nswb Quill stroke: 80 mm Head swiveling: +/- 45° Total power requirement: 3 kW Machine weight approx.: 1.2 t Machine dimensions (L x W x H): 1.27 x 1.1 x 1.65 m Accessories: swiveling vertical head with extendable quill, fixed table, universal table, rotary indexing table 250 mm diameter, dividing head with 3-jaw chuck 135 mm diameter, tailstock, various milling arbors, drill chuck, coolant system

Sąlyga: naudotas, Gamybos metai: 1978, x-travel 300 mm y-travel 160 mm z-travel 340 mm Table clamping surface 600 x 210 mm Spindle mount SK 40 Spindle speeds 40 - 2000 rpm Nsdowl N R Nopfx Af Njwb Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Machine weight approx. 0.7 t - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, HEIDENHAIN 3-axis digital readout, counter bearing, various short and long milling arbors, various collets, original DECKEL tool cabinet

Sąlyga: naudotas, Gamybos metai: 1973, x-axis travel: 290 mm Nodpfxstqqn Ro Af Nowb y-axis travel: 170 mm z-axis travel: 310 mm Table clamping surface: 600 x 215 mm Spindle taper: SK 40 Spindle speeds: 50 - 2500 rpm Feeds: 9 - 450 mm/min Quill stroke: 70 mm Total power requirement: 1.8 kW Machine weight approx.: 860 kg Machine dimensions (L x W x H): 1.06 x 1.05 x 1.33 m Accessories: vertical head with extendable quill, fixed table, counter bearing, coolant device

Sąlyga: naudotas, Gamybos metai: 1999, x-travel 290 mm y-travel 170 mm z-travel 310 mm Table clamping surface 600 x 210 mm Spindle taper SK 40 Spindle speeds 50 - 2600 rpm Feeds 9 - 450 mm/min Quill stroke 70 mm Total power requirement 5.5 kW Machine weight approx. 720 kg - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, Heidenhain 3-axis digital readout, various short milling arbors, coolant system Nwedewngkrspfx Af Nsb

Sąlyga: geras (naudotas),

Sąlyga: paruoštas naudoti (naudotas), Deckel FP 1 Milling Machine Travel X-axis: 300 mm Travel Y-axis: 160 mm Travel Z-axis: 340 mm Spindle mount: SK 40 with drawbar thread X-axis feed: 290 mm Nedpfx Aouvih Hjf Newb Weight: approx. 940 kg (including pallet) Space required: 1300 mm x 1200 mm x 1800 mm (L x W x H) Dimensions with pallet: 1400 mm x 1400 mm x 2000 mm (L x W x H) You're welcome to arrange a viewing appointment. We can organize affordable shipping for you! You will receive a proper invoice. For customers outside Germany, a net invoice can also be issued, provided you have a valid VAT identification number. Subject to prior sale. Visit our shop and check out our other offers as well. All company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Technical data may vary and errors in the item description may occur and are subject to change.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 28670, X-travel: approx. 400 mm y-travel: 150 mm z-travel: 340 mm Clamping surface: 600 x 210 mm T-slots: 4 T-slot width: 12 mm Spindle speeds: 20 - 2000 rpm Speed range - vertical: 60 - 1200 rpm Speed range - horizontal: 95 - 1900 rpm Spindle speed steps: 12 Feed range: 10 - 500 mm/min Nwodpfx Ajcxxlisf Nob Feed steps: 10 Spindle taper: MT 4 Vertical quill stroke: 60 mm Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.9 x 1.05 x 1.55 m

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 2880, x-travel: 290 mm y-travel: 120 mm z-travel: 350 mm Table clamping surface: 690 x 175 mm Spindle mount: SK40 Number of spindle speeds: 17 Feed range: 42 - 680 mm/min Number of feed steps: 14 Speed range: 50 - 2240 rpm Machine weight approx.: 0.6 t Nedpecxxntofx Af Nswb Universal tool milling machine with swiveling vertical head +/- 90°, dual-pole switchable spindle drive with forward and reverse. The machine is equipped with graduated handwheels for all 3 axes + quick adjustment via cross handle in the x direction, electric feed in x direction, feed steps adjustable via change gears, overhead rail for horizontal milling, 3-position cam switch in x direction for automatic cycle program, emergency stop on operator panel and main switch.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 2819-0517, x-axis travel: 300 mm y-axis travel: 300 mm z-axis travel: 400 mm (340 mm with apron) Clamping surface: 390 x 620 mm / chip tray Spindle speed: 40–2500 rpm Feed range: 0.2–3600 mm/min Rapid traverse: 4.0 m/min Control: Contour 3 – 3D path control system Spindle taper: SK40 Quill stroke: 60 mm Swivel head +/-: 90° Spindle drive motor: 2.0 kW Total power requirement: 1.6 / 2.0 kW Nedpfx Aocxxp Tef Nowb Machine weight approx.: 1.3 t Space requirement approx.: 1.8 x 1.8 x 1.8 m Universal milling machines from Deckel have proven themselves for decades in tool, mould, and mechanical engineering. CNC-controlled universal milling machine with Contour 3 control, vertical head swivels +/- 90° with 60 mm quill stroke, horizontal spindle, feeds and rapid traverse in 3 axes, hydraulic tool clamping, automatic central lubrication, coolant system, emergency stop, chip guard enclosure with chip tray, separate control cabinet. The machine is in good condition.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 52326/08, x-axis travel: 250 mm Nwodpscxxrvjfx Af Njb y-axis travel: 150 mm z-axis travel: 305 mm Table clamping surface: 600 x 210 mm Spindle speed range: 40 - 2000 rpm Number of spindle speeds: 16 Spindle taper: SK 40 Feed rate: 10 - 500 mm/min Number of feed rates: 16 Swiveling vertical head: +/- 90 degrees Total power requirement: 1.0 / 1.4 kW Machine weight approx.: 0.8 t Space requirements approx.: 1.0 x 1.25 x 0.85 m Universal tool milling machine type Deckel FP1 with: - Swiveling vertical spindle, - Vertical head swivels +/- 90°, - SK40 spindle taper, - Automatic feeds, - Two-speed (pole-changing) motor, and - Separate control cabinet with main switch.

Sąlyga: geras (naudotas), Deckel FP1 milling machine, manufactured in Germany by Friedrich Deckel AG, Munich. The machine is fully operational and in good working condition. Nsdpfow Amaisx Af Njwb For further information, please do not hesitate to contact us.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Universal Tool Milling Machine Deckel FP1: Technical specifications: - Travel X-axis: approx. 300 mm - Travel Y-axis: approx. 150 mm - Travel Z-axis: approx. 340 mm - Swivelling angle table - Clamping surface: 260 x 600 mm - T-slots: 5 - T-slot width: 12 mm - Spindle speed range: 20 - 2000 rpm - Speed range – vertical: 60 - 1200 rpm - Speed range – horizontal: 95 - 1900 rpm - Spindle speed steps: 12 - Feed range: 10 - 500 mm/min - Feed steps: 10 - Spindle taper: MK 4 - Vertical quill stroke: 60 mm - Total connected load: 1.7 kW - Machine weight approx.: 0.8 t - Required space approx.: 0.9 x 1.05 x 1.55 m Scope of overhaul: - Complete renewal of the electrics (by a professional, with wiring diagram!) - Cleaning - Polishing of all bare metal surfaces - Repainting - Replacement of various signs - Replacement of all standard parts (screws, handles, levers, handwheels, oil sight glasses, etc.) - Bearing and sealing of the upper gearbox shaft - Sealing of the coolant pump - Conversion of feed axes to safety handwheels - New installation of coolant lines - Adjustment of gibs and axis clamps On request, the machine can be fitted with glass scales on all axes. The machine can be inspected and tested by appointment. Nwsdpshv H Spsfx Af Nsb We are also happy to offer machine transport and various accessories.