Traub Tnc 65 pirkti naudotą (96)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 5318, veleno skylė: 26 mm, veleno greitis (maks.): 4 750 aps./min, TECHNICAL DETAILS Max. round diameter: 26 mm Max. square dimensions: 18 mm Max. hexagon dimensions: 22 mm Spindle power: 2.2 kW Number of spindles: 4 Spindle bore: 26 mm Speeds: 1,180 - 4,750 rpm Tool holder: 6 slots MACHINE DETAILS Length (L – R): 1,800 mm Width (F – B): 1,000 mm Height: 1,400 mm Njdpfx Aowtq Urjbmslh Weight: 800 kg Total power: 3.2 kW Operating voltage: 380 V 50 Hz

Sąlyga: naudotas, Gamybos metai: 1989, Control / Distance between centers // mm Swing diameter over bed / mm Control: TRAUB System TX-8 Spindle bore (max. bar capacity) mm 42 Chuck diameter mm 200 Nsdpfx Absud Inmomjlh Turning diameter mm 180 Turning length mm 450 Max. swing diameter mm 450 Swing diameter over sorting device mm 350 Swing diameter over cross-mounted tailstock mm 180 Swing diameter over steady rest housing mm 240 Longitudinal slide travel mm 490 Cross slide travel mm 160 Spindle nose DEN 55.026 = 26 - Spindle diameter at front bearing mm 85 Power: 41 kW

Sąlyga: geras (naudotas), Gamybos metai: 1990, Manufacturer Traub, model TNS 60, control system type TX8-D, recorded operating hours: 2,321, serial number: 1407, year of manufacture: 1990 Nodjw Hdwgjpfx Abmolh FROM TRAINING WORKSHOP

Sąlyga: naudotas, AUTOMATINIS VIENO VERPTUVĖS TEKINIMO STAKLĖS TB-42, maks. skersmuo 42 mm Nsdpfx Ajxcpi Rsbmslh

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 13 116 h, Max. bar capacity mm 20 Max. Z-axis travel sliding headstock/short turning mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Nlsdpfx Aswuddvebmoh Max. rapid traverse Z m/min 20 Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 B-axis swivel angle degrees 105 Lower turret Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Backworking unit Tool stations quantity 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Holder diameter mm 25 Sub spindle Max. spindle bore mm 20 Max. speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant system base unit Pump pressure bar 3 / 8 Tank capacity l 250 Pump rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions Length x Width x Height mm see layout plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, veikimo valandos: 49 274 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 247, tekėjimo ilgis: 80 mm, veleno greitis (maks.): 12 000 aps./min, padavimo ilgis X ašis: 35 mm, padavimo eiga Y ašimi: 37 mm, padavimo ilgis Z ašis: 75 mm, Strypo skersmuo (maks.): 12 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: Mitsubishi TX-8i Turning length: 80 mm Main Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12.7 mm Travel in Z1: 75 mm Workpiece clamping: Collet chuck Counter Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222 mm / 139 mm Rapid traverse in X3/Z4: 30 m/min Workpiece clamping: Collet chuck Tool Turret I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø 25 mm Live tooling: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35 mm / 37.5 mm Rapid traverse in X1/Y1: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch: 32 mm Live tooling: 12,000 rpm, 4 kW, 7 Nm Number of live stations: 4 Travel in X3/Z3: 222 mm / 139 mm Rapid traverse in X3/Z3: 30 m/min Rear Attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch: 32 mm MACHINE DETAILS Dimensions: 1,450 x 950 x 1,480 mm Weight: 1,600 kg Connected load: 16 kW Footprint: 7,943 x 1,430 x 1,480 mm Control powered-on time: 96,171 h Powered-on time: 100,147 h Nljdpjvrz E Hefx Abmoh Production time: 45,983 h Spindle 1: 49,274 h Spindle 2: 47,771 h Spindle 5: 15,297 h EQUIPMENT - Chip management: Chip conveyor - Coolant management: Coolant pump (KSS pump) - Raw material feed: Bar loader, FMB minimag 3200 - Finished parts discharge: Workpiece discharge device (tube) - Emulsion mist extraction: Interface mechanically prepared - Tool holders: Various fixed and driven holders

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25//16455, sukimosi greitis (maks.): 2 800 aps./min, sukimosi greitis (min.): 1 400 aps./min, tekėjimo ilgis: 65 mm, TECHNICAL DETAILS Nlsdpfx Abswtq Ulomjh Turning length: 65 mm Thread length: 40 mm Maximum part length: 65 mm Motor speeds: 1,400–2,800 rpm MACHINE DETAILS Total power requirement: 2.6 kW Machine weight: 0.7 t Space requirements: 1,200 x 700 x 1,600 mm Main voltage: 415 V

Gamybos metai: 2005, Sąlyga: geras (naudotas), 7 Driven Tool Holders suitable for CNC lathe Manufacturer: TRAUB TNA 480, Tool Mount Size: VDI 40. Also fits SAUTER tool turrets with VDI 40 interface. 7 Horizontal units No. 3/4/5/6/7/8/9 for drilling and milling, price per unit: €550 Nlsdpshwnfkjfx Abmeh 2 Horizontal units No. 1 and No. 2 for thread tapping, price per unit: €600 1 NC drill chuck VDI 40, clamping range 1-13 mm, price: €100 1 NC drill chuck VDI 40, clamping range 2.5-16 mm, price: €150

Sąlyga: geras (naudotas), Gamybos metai: 1989, 1 x automatic lathe Traub TD 16 Nledpfx Asvga A Tjbmjh Year of manufacture: 1989 with hydraulic single bar feeder LNS Hydrobar 3.16 -HS 4.4 Year of manufacture: 1989 Equipment: 6-position star turret Quick-release collet system Long turning device Vogel central lubrication system Accessories: see photos The machine can be inspected under power.

Sąlyga: nepatikrintas (naudotas), Traub TNL 12/7 Nodpfx Abovk Tl Nemslh

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1994, veikimo valandos: 8 000 h, Funkcionalumas: nepatikrintas, Machine in good condition. Nlsdpfxev Im Sde Abmjh

Sąlyga: naudotas, Gamybos metai: 1988, Technical details: Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z-axis): 810 mm Cross travel (X-axis): 205 mm Control: TX-8 Spindle bore: 60 mm Spindle speed: 63 - 3150 rpm (2-step) Feed rate: 10,000 mm/min Tool turret - number of stations: 8 Operating hours (power-on hours): 8,834 h Tailstock quill taper: SK30 DIN 2080 Tailstock quill stroke: 105 mm Operating pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 t Machine dimensions (LxWxH) approx.: 1.8 x 3.3 x 1.8 m Hydraulic system dimensions: 580 x 400 x 750 mm Equipment: 200 mm hydraulic chuck (without jaws) Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system Control panel Accessories: Fine adjustment device for tool setting Nlsdeu Rqabepfx Abmeh

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, veleno skylė: 42 mm, tekėjimo ilgis: 206 mm, TECHNICAL DETAILS Spindle power: 5.5 - 9 kW Max. workpiece length: 206 mm Spindle bore: 42 mm Tool turret: 4 slots Nljdpfswtq Ufsx Abmsh MACHINE DETAILS Length (L - R): 2,500 mm Width (front - back): 900 mm Height: 1,700 mm

Sąlyga: naudotas, Gamybos metai: 1990, Techniniai duomenys: Nlsdpfx Aew I R Ndobmoh Sukimosi skersmuo: 445 mm Sukimosi ilgis: 2000 mm Bendras energijos poreikis: 34 kW Apytikslis staklių svoris: 7,5 t Apytiksliai matmenys: 6 x 2,5 x 2,2 m Sukimosi skersmuo virš lovos vežimo: 660 mm Veleno skylė: 65 mm Veleno sūkių diapazonas: 16–3150 aps./min. Greitasis pastūmos greitis X kryptimi: 10 mm/min Greitasis pastūmos greitis Z ašyje: 15 m/min Su CNC valdymu TX 8 D C ašis, pavaromi įrankiai Revolverinė galvutė su 14 pozicijų Uodega, SMW SLK 520 N centras kaip NC ašis Drožlių transporterio ir aušinimo įranga

Gamybos metai: 1978, Sąlyga: naudotas, Article: Program-controlled automatic lathe Brand: Traub Nsdpfxjl Rmqte Abmolh Model: TF60 / 140 Year of manufacture: 1978 Bar automatic lathe Please contact us for further information and images via email(at) or

Sąlyga: labai geros būklės (naudotas), Traub TNL12 CNC Swiss Talpa: 12 mm Darbo valandos: 25 596 val. Kraft & Bauer gaisro gesinimo sistema Njdpfx Asw R E Adebmolh Popierinis filtras: kompaktiškas juostinis filtras Sukonfigūruota kaip parodyta nuotraukoje (daugiau nuotraukų vėliau) Eksploatuojama nuo 2009 m. (pradžioje demonstracinis modelis) 12 pėdų FMB strypų padavėjas Miglos surinkėjas Drožlių transporteris „Yra 2 staklės“

Sąlyga: naudotas, Gamybos metai: 1993, Techninė informacija: x eiga: 400 mm y eiga: 300 mm z eiga: 400 mm Veleno greitis: 8000 aps./min Valdymas: Fanuc OM Tvirtinimo stalas: 500x300 mm Žurnalų vietų skaičius: 16 vnt. Įrankio tvirtinimas: SK40 Atstumas tarp darbinio veleno ir tvirtinimo paviršiaus maks.: 50-450 mm Padėklų kiekis: 2 vnt./detalė Bendras galios poreikis: 10 kW Nledpfx Aou Idn Hsbmjh Mašinos svoris apytiksliai: 2,5 t Mašinos matmenys (IxPxA): 2,4x1,8x2,5 m Transportavimo matmenys: 2,45x1,8x2,5 m - Elektros spinta - Aušinimo įranga - Drožlių transporterio gamintojas META (transportavimo aukštis 1500 mm; plotis 200 mm) Stalo keitimo funkcija neveikia.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1991, Multi-spindle & bar automatic lathe TRAUB TD 26 Year: 1991 * Power at spindle: 2.2 kW * Number of spindles: 4 * Spindle bore: 26 mm * Speeds: 1.18 – 4,750 rpm * Total power: 3.2 kW * Length (L – R): 1,800 mm * Width (F – R): 1,000 mm * Height: 1,400 mm * Weight: 800 kg * Toolholder positions: 6 tools Additional information * Max round stock: 26 mm * Max square stock: 18 mm * Max hexagonal stock: 22 mm * Bar feeder included Nedswc Aqwjpfx Abmslh

Sąlyga: naudotas, Gamybos metai: 1987, Technical details: Swing diameter over bed: 180 mm Turning length: 490 mm Swing diameter: 450 mm Cross travel (Z-axis): 168 mm Control: Traub TX8D Spindle speed: 20 – 4000 rpm Spindle bore: Ø 60 mm Operating hours (power-on hours): 23,495 h Tool turret: 12 tools Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. LxWxH: 3.6 x 2.5 x 2.2 m Nlodpfx Absu Ix N Sjmjh Tool holder: cylindrical shank DIN 69880 (VDI 3425) Ø 40x63 Röhm power chuck Ø 200 mm, hydraulic clamping Operation via dual foot switch and control panel/operator panel. Coolant system The Traub features an integrated chip conveyor with an ejection height of 1,100 mm (currently non-functional). Accessories: various small parts 8 assorted leveling feet without tailstock as is.

Sąlyga: labai geros būklės (naudotas), Multi-spindle & bar automatic lathes TRAUB TK 42 Nodpfx Abewc Aqdemslh * Spindle drive power: 5.5 – 9 kW * Maximum workpiece length: 206 mm * Spindle bore: 42 mm * Length (L–R): 2500 mm * Width (F–B): 900 mm * Height: 1700 mm * Tool turret: 4 slides

Sąlyga: geras (naudotas), Gamybos metai: 2013, BAR FEEDER TRAUB A 25 2013 Turning length: 65 mm Nlodswc Amxopfx Abmjh Total power requirement: 2 kW Machine weight approx. 0.7 t Space requirement approx. 1200 x 700 x 1600 mm Thread length: 40 mm Max. part length: 65 mm Motor speeds: 1400–2800 rpm Bar loader included!