CNC šveicariško tipo tekinimo staklės

TRAUB TNL 12/7

Būklė: geras (naudotas), Gamybos metai: 2002, TRAUB TNL 12/7 CNC Long Turning Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF DELIVERY Includes (not limited to): Traub TNL 12/7 CNC Turning Machine Meyrat High-Frequency Spindles, 2 units Tool holders (driven and non-driven) Guodpfxst E Dbyo Apyjh FMB Minimag 3200 C Bar Feeder Hydraulic unit High-pressure pump Chip conveyor Exact scope of delivery as shown in the photo series No liability is assumed for the correctness, completeness, or up-to-dateness of the information provided.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool posts: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotary spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating axis for back-working: X4, S5 Bar feeder position: on operator's right Machine center height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Gjdpfx Ajw T Tcwspyouh Max. part length: - guide bush machining: 180 mm - collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous), 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous), 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotary Collet for guide bush, type: Meister 605 Number of side tool holders, combined - fixed: 2 x 5 - rotary: 3 + 3 Number of front tool holders, combined - fixed: 4 - rotary: 3 Number of rear tool holders, combined - fixed: 3 + 3 - rotary: 3+3 Tool section: 12x12 mm Standard rotary tool holder: ESX 20 Bar feeder: yes Parts catcher: yes All technical data subject to change without notice, errors and omissions excepted.

Būklė: naudotas, CNC ilgo tekinimo automatas TRAUB TNL 12/7 Guedpfx Apezxii Neysh

Būklė: naudotas, CNC ilgo tekinimo automatas TRAUB TNL 12/7 Gujdpfozxii Aox Apyeh

Būklė: naudotas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Minimum C-axis resolution: 0.1 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [degrees] - Number of tool holders: 2 TOOL HOLDER 1 - Number of stations: 5 TOOL HOLDER 2 - Number of stations: 5 - Number of driven stations: 4 - Driven tool speed: 8,000 [rpm] SECONDARY MACHINING UNIT - Number of stations: 7 - Number of driven stations: 3 - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 14 [kW] WEIGHT AND DIMENSIONS - Footprint: 2270 x 1650 [mm] - Machine height: 2200 [mm] - Machine weight: 3,500 [kg] MACHINE HOURS - Power-on hours: 46,571 [h] EQUIPMENT - Control: Fanuc - Driven tool motorization on: S2 - Driven guide bushing - Parts catcher - Parts ejector - Swarf conveyor: KNOLL Gusdpfxjuhayce Apysh - Coolant tank * with high-pressure pump: 100 [bar] - Bar feeder: TORNOS ROBOBAR SSF - Oil mist extraction: Elbaron - Fire extinguishing system * * NB: Functionality not guaranteed. To be checked by the buyer's qualified company.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machinable length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of live positions: 6 - Travel path X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 4 COUNTER OPERATION - Number of positions: 4 Gsdpfx Aeuhawzjpyouh - Number of live positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 18 kW ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts removal device - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 - Set of jaws and collets for bar feeder magazine - Set of spare parts

Būklė: naudotas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bush): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven stations on turret: 6 - Max. diameter in sub spindle: 12.7 [mm] - Sub spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] ACCESSORIES - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub spindle Gujdouhav Depfx Apyeh - Brake for main spindle and sub spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various fixed and driven tool holders

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Vertikali blokų forma: KURTZ mod. MFV (4920 x 1274/1000 x 1240 mm) Pagrindiniai duomenys: • Gamybos metai: 2005 • Bloko matmenys (A x P x I): 4920 x 1274/1000 x 1240 mm Gedpfoucvq Hsx Apyouh • Darbinė įtampa: 3x400V 50Hz • Galia: 77 kW • BLOKO FORMA su judančia šonine siena • Pilna vakuuminė sistema (VACUUM SYSTEM GARDNER DENVER/SIEMENS) • Hidraulinė sistema REXROTH-BOSCH • Darbo silosas bloko formos išankstiniam pakrovimui su dulkių surinkimu • Siemens PLC valdiklis ir valdymo pultas su liečiamu ekranu HMI - 2019 m. pakeisti NAUJAIS, atliktas valdymo programos UPGRADE’as • Liečiamas SIEMENS ekranas (pakeistas NAUJU, su didesniu ekranu) • MATTHEWS blokų žymėjimo/datavimo spausdintuvas • Blokų evakuacijos sistema su blokų saugojimo sandėliu • Pilnas dokumentų rinkinys • Būklė: IDEALI Galima pakoreguoti didžiausią bloko aukštį, pvz., iki 4550–4600 mm.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT TOOL POST - Number of positions: 4 Gjdpfx Apeuhaxfjysuh - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] EQUIPMENT - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar loader: LNS TRYTON HYBRID

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), SMS MEER CNC-Doppelseitige Anfasmaschine Hersteller: SMS MEER Typ: RFA 14 Baujahr: 2000 Arbeitsbereich: Rohrdurchmesser Ø 21,3 – 114,3 mm Wandstärke: 2,3 – 11 mm Länge: 6–12 m Gsdpoghrgusfx Apyouh Die Anlage besteht aus zwei RFA14-Anfasmaschinen mit Transportvorrichtungen zwischen den Maschinen. Die Aufgabe der Maschinen ist das Innen- und Außen-Anfasen beider Rohrenden. Das Rohrbearbeitungsspektrum umfasst einen Durchmesserbereich von 21,3 bis 114,3 mm und eine Wandstärke von 2,3 bis 11 mm bei einer Rohrlänge von 6 bis 12 m. Die Fördertechnik im Bereich der Anfasmaschinen dient dazu, die Rohre vom Rollgang aufzunehmen und zwischen den Anfasmaschinen zu transportieren.