Automatinės tekinimo staklės

Traub TNL 12/7

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, TECHNICAL DATA Spindle Head Maximum Bar Diameter (mm): 13.0 Material Quality (DIN 671) (mm): Ø X h9 Collet, optional: Through-hole Guide Bush, optional: Through-hole Max. Turning Length / Spindle Stroke With Fixed Guide Bush (mm): 130 With Rotating Guide Bush (mm): 80 With Programmable Guide Bush (mm): 80 Spindle Speed: 12,000 min⁻¹ C-Axis Electronic Resolution (degrees): 0.001 Rapid Traverse Z1 (m/min): 30 Tool Carrier 1 Slide Travel X1 (mm): 35 Slide Travel Y1 (mm): 38 (-10 +28) Rapid Traverse X1 / Y1 (m/min): 15 Tool Stations (number): 6 (12) Turning Tool Cross-section (mm): 8x8 or 12x12 Clamping Range for Driven Drilling Tools (mm): 0.5 - 7 Tool Change Time (sec): 0.3 Tool Carrier 2 Slide Travel X2 (mm): 35 Slide Travel Z2 (mm): 50 Rapid Traverse X2/Z2 (m/min): 15 Tool Stations (number): 6 Turning Tool Cross-section (mm): 8x8 or 12x12 Clamping Range for Driven Drilling Tools (mm): 0.5 - 7 Tool Change Time (sec): 0.3 Driven Tool System for Tool Carrier 1 and 2 Speed (min⁻¹): 0...8000 Maximum Number of Tools: 2x6 Clamping Range for Drilling Tools (mm): 0.5-7 Sub-Spindle / Front Device Maximum Bar Diameter (mm): 13.0 Maximum Longitudinal Stroke 23, 24 / X3 (mm): 140 / 228 Rapid Traverse 23,24/X3 (m/min): 30 Tool Stations (number): 4 Spindle Speed: 12,000 min⁻¹ C-Axis Electronic Resolution (degrees): 0.001 Backworking Attachment, Synchronous / Fixed Z-Axis Stroke Synchronous with Work Spindle (mm): 80 Tool Holder Diameter (mm): 20 Tool Stations (number): 3 Backworking Attachment (X4 Axis) X4 Stroke (mm): 39 Rapid Traverse (m/min): 15 Tool Holder Diameter (mm): 28 Tool Stations (number): 4 Driven Tool System for Backworking Attachment (with X4 Axis) Speed: 0...10,000 min⁻¹ Maximum Number of Driven Tools: 4 Clamping Range for Drilling Tools Bsdpfx Afoyr N Dzo Ajdb Driven (mm): 0.5 - 7 Non-driven (mm): 0.5 - 10 Coolant System Pump Pressure, single-stage (bar): 3 120 bar Pump for Front/Rear Attachment Tank Capacity (l): 180 Flow Rate (l/min): 40

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, Bendrieji duomenys Įrenginio svoris: 2200 kg Aukštis: 1700 mm Gylis: 1200 mm Matmenys Įrenginio ilgis: 2200 mm Bodpfxox D Dwfo Af Aedb Ši 3 ašių Star SR 20 R III staklė pagaminta 1996 m. Didžiausias tekinimo skersmuo – 20 mm, veleno apsukos iki 8 000 aps./min., greito paėmimo greitis 35 m/min. Idealiai tinka preciziškam tekinimui – turi šešias fiksuotas tekinimo įrankių pozicijas ir penkias radialines varomų įrankių stotis. Jei ieškote aukštos kokybės tekinimo galimybių, apsvarstykite mūsų siūlomą Star SR 20 R III įrenginį. Susisiekite dėl daugiau informacijos. Pritaikymo sritys Tekinimas

Būklė: naudotas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bush): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven stations on turret: 6 Bsdpfx Asuhav Def Asdb - Max. diameter in sub spindle: 12.7 [mm] - Sub spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] ACCESSORIES - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub spindle - Brake for main spindle and sub spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various fixed and driven tool holders

Būklė: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 mm - Y-axis travel: -9.5/+28 mm - Z stroke: 48 mm LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z travel: 35/79.5 mm FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 rpm - X/Z travel: 415/138.5 mm BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V ACCESSORIES - CNC control: Traub TX8i Bdsdpfxeuhaw Uo Af Aeb - Driven guide bushing - Coolant tank - Bar loader: FMB Minimag

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Year of Manufacture: 2009, served as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by appointment. Condition: Very good (high precision), immediately available for operation. Spindle hours (as of August 1, 2025): 9,580 h The core of the machine is the integrated travelling column with turning-milling spindle and interpolating B axis. Machine base data: * Partial hollow chucking device (hydraulic) * C axis * Upper cross-slide with turning/milling spindle as motor spindle, with hydraulic clamping for turning operations, spindle interface: Capto C6 * Y axis: +/- 200 mm * B axis: +/- 120° * Tool disc magazine * Absolute, direct linear measurement systems in X, Y, Z1 axes Bdodpfxow Hg Nlj Af Ajb * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1,510 mm * Maximum bar diameter: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C axis speed: up to 5,000 rpm Turning-milling spindle: * Tool holder: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine dimensions (approx. W/D/H): 6,860 x 4,220 x 2,530 mm * Total weight of the machine (approx.): 18.5 t EQUIPMENT: Good equipment ... * No steady rest * Complete documentation available No guarantee for completeness or accuracy of technical information and equipment details. Detailed technical data sheet and further equipment information available on request.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE Bedpfx Aeuhaxfef Asdb - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] EQUIPMENT - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar loader: LNS TRYTON HYBRID

Būklė: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machinable length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of live positions: 6 - Travel path X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 4 COUNTER OPERATION Bdodpjuhawzefx Af Ajb - Number of positions: 4 - Number of live positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 18 kW ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts removal device - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 - Set of jaws and collets for bar feeder magazine - Set of spare parts

Būklė: labai geros būklės (naudotas), Star SA-12 Swiss-Type Automatic Lathe Technical Data Rapid Traverse (X, Y, Z, ZB): 370 mm Maximum Feed Travel (X, Y, Z, ZB): 270 mm Minimum Input Increment (X, Y, Z, ZB): 120 mm Machining Capacity Maximum Turning Diameter: 13 mm Maximum Headstock Stroke: 140 mm Maximum Drilling Capacity: 7 mm Maximum Tapping Capacity: 7 mm Maximum Thread Cutting Capacity: M6 x P1.0 Main Spindle Spindle Speed: 500 – 12,000 rpm Drive: Spindle Drive Main Spindle Motor: 2.2 / 3.7 kW Main Spindle Indexing Angle: 1° or 15° Spindle Bore: 20 mm Tool Slide Type: Linear Slide Number of Tools: 6 tools Number of Driven Tools: 3 tools (Collet: ER 11) Driven Tools Spindle Speed: 1,970 / 2,330 rpm Max. Drilling Capacity: 4 mm Max. Milling Capacity: 4 mm Sub-Spindle Max. Clamping Diameter: 13 mm Max. Part Length for Front Ejection: 85 mm Max. Unclamping Length: 30 mm Spindle Speed: 500 – 8,000 rpm Sub-Spindle Motor: 0.5 kW Tool Selection: 4 tools Max. Drilling Capacity: 4 mm Max. Tapping Capacity: M3 x P0.5 Bedpfswi Ty Asx Af Asdb Power Supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power Consumption: Average 6.0 KVA SCOPE OF SUPPLY Including (not limited to): STAR SA-12 Swiss-Type Automatic Lathe Control: Fanuc Series 18i-T Fire Extinguishing System Coolant Tank Transformer LNS Bar Feeder Exact scope of supply according to the photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Būklė: naudotas, CNC ilgo tekinimo automatas TRAUB TNL 12/7 Bdsdexbtz Ujpfx Af Aeb

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, SERDI Ventilsitz-Fräsmaschine für Zylinderköpfe – Gebrauchtmaschine, in sehr gutem Zustand, sofort einsatzbereit Technische Daten: Abmessungen (L x B x H): 1690 x 1050 x 2170 mm Eigengewicht ca.: 1.085 kg Max. Zylinderkopf-Abmessungen (L x B x H): 1200 x 500 x 450 mm Querschwenkung des Werkstücks: +42° bis -15° Min.-Max. Bearbeitungskapazität: 16 – 70 mm Verfahrwege des Arbeitskopfes: längs: 930 mm quer: 40 mm Kugel-/Zylinderverstellung (Radius): 9 mm Spindel: max. Spindelneigungswinkel: 5° Hub: 200 mm Motorleistung: 1.200 W Drehzahlbereich: 100 – 1.200 U/min Anschlüsse: Stromanschluss: 2,5 kVA – 230 V – 1 Ph – 50/60 Hz Druckluftversorgung: 6 bar Luftvolumen: 300 l Geräuschpegel bei 400 U/min: 72 dBA, bei 1.200 U/min: 82 dBA Bei Interesse kontaktieren Sie mich gern! Weitere Maschinen im Angebot: A-M, Serdi, Comec, AMC, Carmec, Kwik-Way, Serdi, PEG Bdsdpfx Aev Ild Sjf Aob Kurbelwellen-Schleifen, Flachschleifen, Ventilschleifen, Ventilsitzfräsen, Druckprüfung, Teilewaschen, Hauptlagergassenbearbeitung, Ventilführungs-Pressen, Vakuumtester