CNC šveicariško tipo tekinimo staklės

TRAUB TNL 12/7

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, TECHNICAL DATA Spindle Head Maximum Bar Diameter (mm): 13.0 Material Quality (DIN 671) (mm): Ø X h9 Collet, optional: Through-hole Guide Bush, optional: Through-hole Max. Turning Length / Spindle Stroke With Fixed Guide Bush (mm): 130 With Rotating Guide Bush (mm): 80 With Programmable Guide Bush (mm): 80 Spindle Speed: 12,000 min⁻¹ C-Axis Electronic Resolution (degrees): 0.001 Rapid Traverse Z1 (m/min): 30 Tool Carrier 1 Slide Travel X1 (mm): 35 Slide Travel Y1 (mm): 38 (-10 +28) Rapid Traverse X1 / Y1 (m/min): 15 Tool Stations (number): 6 (12) Turning Tool Cross-section (mm): 8x8 or 12x12 Clamping Range for Driven Drilling Tools (mm): 0.5 - 7 Tool Change Time (sec): 0.3 Tool Carrier 2 Slide Travel X2 (mm): 35 Slide Travel Z2 (mm): 50 Rapid Traverse X2/Z2 (m/min): 15 Tool Stations (number): 6 Turning Tool Cross-section (mm): 8x8 or 12x12 Clamping Range for Driven Drilling Tools (mm): 0.5 - 7 Tool Change Time (sec): 0.3 Driven Tool System for Tool Carrier 1 and 2 Speed (min⁻¹): 0...8000 Maximum Number of Tools: 2x6 Clamping Range for Drilling Tools (mm): 0.5-7 Sub-Spindle / Front Device Maximum Bar Diameter (mm): 13.0 Maximum Longitudinal Stroke 23, 24 / X3 (mm): 140 / 228 Rapid Traverse 23,24/X3 (m/min): 30 Tool Stations (number): 4 Spindle Speed: 12,000 min⁻¹ C-Axis Electronic Resolution (degrees): 0.001 Backworking Attachment, Synchronous / Fixed Z-Axis Stroke Synchronous with Work Spindle (mm): 80 Gbjdpsyr N Dzsfx Abboi Tool Holder Diameter (mm): 20 Tool Stations (number): 3 Backworking Attachment (X4 Axis) X4 Stroke (mm): 39 Rapid Traverse (m/min): 15 Tool Holder Diameter (mm): 28 Tool Stations (number): 4 Driven Tool System for Backworking Attachment (with X4 Axis) Speed: 0...10,000 min⁻¹ Maximum Number of Driven Tools: 4 Clamping Range for Drilling Tools Driven (mm): 0.5 - 7 Non-driven (mm): 0.5 - 10 Coolant System Pump Pressure, single-stage (bar): 3 120 bar Pump for Front/Rear Attachment Tank Capacity (l): 180 Flow Rate (l/min): 40

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 415 mm, tekėjimo ilgis: 850 mm, tekėjimo skersmuo: 390 mm, veleno skylė: 105 mm, veleno greitis (maks.): 2 000 aps./min, X ašies eiga: 225 mm, Z ašies eigos atstumas: 950 mm, greitas poslinkis X ašimi: 15 m/min, greitasis eiga Z ašyje: 15 m/min, bendras aukštis: 1 980 mm, bendras ilgis: 4 600 mm, bendras plotis: 1 900 mm, quill skersmuo: 100 mm, plunksnos brūkšnys: 120 mm, bendras svoris: 7 000 kg, strypo praėjimas: 90 mm, įvorės išorinis skersmuo: 300 mm, valdiklių gamintojas: Siemens, valdiklio modelis: 828D + Shopturn, Įranga: dokumentacija / vadovas, max. turning diameter: 390 mm Z-axis travel: 950 mm max. spindle speed: 2,000 rpm AC spindle motor SIEMENS (cont./15min): 25/33 kW bar capacity: 90 mm spindle nose: A2-11 Including accessories, among others: SAUTER 12-station turret VDI-40 Trifix interface for driven tools C-axis with spindle clamp and stabilization wide and sturdy flat guides 45° slant bed for optimal chip flow hinged belt chip conveyor with chip bin 3-jaw Kitagawa power chuck ø 300 mm manual swing-type tool measurement hydraulic tailstock manually adjustable with programmable quill coolant system with high-performance pump (4 bar) Godpfx Ajfk Et Aobbobi Rittal filter fan on control cabinet

Būklė: geras (naudotas), Gamybos metai: 2002, TRAUB TNL 12/7 CNC Long Turning Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Gbsdot E Dbyopfx Abbsi Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF DELIVERY Includes (not limited to): Traub TNL 12/7 CNC Turning Machine Meyrat High-Frequency Spindles, 2 units Tool holders (driven and non-driven) FMB Minimag 3200 C Bar Feeder Hydraulic unit High-pressure pump Chip conveyor Exact scope of delivery as shown in the photo series No liability is assumed for the correctness, completeness, or up-to-dateness of the information provided.

Būklė: naudotas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bush): 130/80 [mm] - Spindle power: 4 [kW] Gedpeuhav Dofx Abbjbi - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven stations on turret: 6 - Max. diameter in sub spindle: 12.7 [mm] - Sub spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] ACCESSORIES - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub spindle - Brake for main spindle and sub spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various fixed and driven tool holders

Būklė: naudotas, Apvalaus šlifavimo staklės STUDER S20-2 Godpfx Ajxrg Hxjbbobi

Būklė: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 mm - Y-axis travel: -9.5/+28 mm - Z stroke: 48 mm LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z travel: 35/79.5 mm Gbjdpfjuhaw Uex Abbji FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 rpm - X/Z travel: 415/138.5 mm BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V ACCESSORIES - CNC control: Traub TX8i - Driven guide bushing - Coolant tank - Bar loader: FMB Minimag

Būklė: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machinable length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of live positions: 6 - Travel path X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 4 Gedpfx Abouhawzjbobi COUNTER OPERATION - Number of positions: 4 - Number of live positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 18 kW ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts removal device - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 - Set of jaws and collets for bar feeder magazine - Set of spare parts

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2025, veikimo valandos: 20 h, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 200 mm, matavimo diapazonas Y ašis: 200 mm, matavimo diapazonas Z ašis: 200 mm, ruošinio svoris (maks.): 15 kg, garantijos trukmė: 12 mėnesiai, įvesties srovės tipas: Oro kondicionierius, X ašies eiga: 200 mm, Y ašies eiga: 200 mm, Z ašies eigos atstumas: 200 mm, įėjimo įtampa: 230 V, Įranga: Tipinė plokštelė prieinama, apšvietimas, dokumentacija / vadovas, 3D Coordinate Measuring Machine Mahr MS2VT Used multisensor CMM with motorized zoom and active vibration damping Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. Includes the latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Gsdpfx Abedz Er Rsbobi Delivery with factory service or by freight forwarding, worldwide. Online or on-site demonstrations with customer workpieces, application-specific consulting by accredited Profitech measurement laboratories during project planning. Comprehensive service: – Delivery, installation, commissioning, accuracy verification according to standards, certification, and detailed acceptance documentation. Individual training programs also available as online courses. Leasing, lease-purchase, or direct financing available through Profitech, without involving financial institutions. Measurement device can be configured individually to meet customer requirements. • Measuring range per sensor: 200x200x200 mm • Dimensions: 900x750x950 mm Bcym337udm • Weight: approx. 170 kg • Accuracy: E2 = 2.4 + L/150 [µm] • Retrofit 2024 • incl. USB camera with fixed focal length • incl. LED ring light • incl. calibration standard • incl. dual-monitor operation • incl. new Windows 10 • incl. Opticheck3D 5.0 evaluation software (12 months free SW updates) Sample image from manufacturer (sister device)

Būklė: naudotas, CNC ilgo tekinimo automatas TRAUB TNL 12/7 Gbsdsxbtz Uopfx Abboi

Būklė: naudotas, Gamybos metai: 2007, mašinos/transporto priemonės numeris: 1056795, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 13 432 h, X ašies eiga: 1 270 mm, Y ašies eiga: 508 mm, Z ašies eigos atstumas: 635 mm, įrankių magazino lizdų skaičius: 24, valdiklių gamintojas: Haas, bendras svoris: 6 000 kg, valdiklio modelis: Haas, aušinimo skysčio tiekimas: 20 juosta, X ašies padavimo greitis: 21 m/min, veleno greitis (maks.): 12 000 aps./min, Įranga: dokumentacija / vadovas, Laba diena, Gjdpfx Aswccpaebbsbi dėl įmonės uždarymo parduodama visa įmonė. Įrenginiai yra geros būklės, o įrankius galima derėtis.