CNC šveicariško tipo tekinimo staklės

TRAUB TNL 12/7

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, TECHNICAL DATA Spindle Head Maximum Bar Diameter (mm): 13.0 Material Quality (DIN 671) (mm): Ø X h9 Collet, optional: Through-hole Guide Bush, optional: Through-hole Max. Turning Length / Spindle Stroke With Fixed Guide Bush (mm): 130 With Rotating Guide Bush (mm): 80 With Programmable Guide Bush (mm): 80 Spindle Speed: 12,000 min⁻¹ C-Axis Electronic Resolution (degrees): 0.001 Rapid Traverse Z1 (m/min): 30 Tool Carrier 1 Slide Travel X1 (mm): 35 Slide Travel Y1 (mm): 38 (-10 +28) Rapid Traverse X1 / Y1 (m/min): 15 Tool Stations (number): 6 (12) Turning Tool Cross-section (mm): 8x8 or 12x12 Clamping Range for Driven Drilling Tools (mm): 0.5 - 7 Tool Change Time (sec): 0.3 Tool Carrier 2 Slide Travel X2 (mm): 35 Slide Travel Z2 (mm): 50 Rapid Traverse X2/Z2 (m/min): 15 Gjdpfx Acsyr N Dzoyjip Tool Stations (number): 6 Turning Tool Cross-section (mm): 8x8 or 12x12 Clamping Range for Driven Drilling Tools (mm): 0.5 - 7 Tool Change Time (sec): 0.3 Driven Tool System for Tool Carrier 1 and 2 Speed (min⁻¹): 0...8000 Maximum Number of Tools: 2x6 Clamping Range for Drilling Tools (mm): 0.5-7 Sub-Spindle / Front Device Maximum Bar Diameter (mm): 13.0 Maximum Longitudinal Stroke 23, 24 / X3 (mm): 140 / 228 Rapid Traverse 23,24/X3 (m/min): 30 Tool Stations (number): 4 Spindle Speed: 12,000 min⁻¹ C-Axis Electronic Resolution (degrees): 0.001 Backworking Attachment, Synchronous / Fixed Z-Axis Stroke Synchronous with Work Spindle (mm): 80 Tool Holder Diameter (mm): 20 Tool Stations (number): 3 Backworking Attachment (X4 Axis) X4 Stroke (mm): 39 Rapid Traverse (m/min): 15 Tool Holder Diameter (mm): 28 Tool Stations (number): 4 Driven Tool System for Backworking Attachment (with X4 Axis) Speed: 0...10,000 min⁻¹ Maximum Number of Driven Tools: 4 Clamping Range for Drilling Tools Driven (mm): 0.5 - 7 Non-driven (mm): 0.5 - 10 Coolant System Pump Pressure, single-stage (bar): 3 120 bar Pump for Front/Rear Attachment Tank Capacity (l): 180 Flow Rate (l/min): 40

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 415 mm, tekėjimo ilgis: 850 mm, tekėjimo skersmuo: 390 mm, veleno skylė: 105 mm, veleno greitis (maks.): 2 000 aps./min, X ašies eiga: 225 mm, Z ašies eigos atstumas: 950 mm, greitas poslinkis X ašimi: 15 m/min, greitasis eiga Z ašyje: 15 m/min, bendras aukštis: 1 980 mm, bendras ilgis: 4 600 mm, bendras plotis: 1 900 mm, quill skersmuo: 100 mm, plunksnos brūkšnys: 120 mm, bendras svoris: 7 000 kg, strypo praėjimas: 90 mm, įvorės išorinis skersmuo: 300 mm, valdiklių gamintojas: Siemens, valdiklio modelis: 828D + Shopturn, Įranga: dokumentacija / vadovas, max. turning diameter: 390 mm Z-axis travel: 950 mm max. spindle speed: 2,000 rpm AC spindle motor SIEMENS (cont./15min): 25/33 kW bar capacity: 90 mm spindle nose: A2-11 Including accessories, among others: SAUTER 12-station turret VDI-40 Trifix interface for driven tools C-axis with spindle clamp and stabilization wide and sturdy flat guides 45° slant bed for optimal chip flow hinged belt chip conveyor with chip bin 3-jaw Kitagawa power chuck ø 300 mm manual swing-type tool measurement hydraulic tailstock manually adjustable with programmable quill coolant system with high-performance pump (4 bar) Rittal filter fan on control cabinet Gedpjfk Et Aofx Acyeip

Būklė: geras (naudotas), Gamybos metai: 2002, TRAUB TNL 12/7 CNC Long Turning Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF DELIVERY Includes (not limited to): Traub TNL 12/7 CNC Turning Machine Meyrat High-Frequency Spindles, 2 units Tool holders (driven and non-driven) FMB Minimag 3200 C Bar Feeder Hydraulic unit High-pressure pump Chip conveyor Exact scope of delivery as shown in the photo series Gedpfx Aot E Dbyjcysip No liability is assumed for the correctness, completeness, or up-to-dateness of the information provided.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 mm - Y-axis travel: -9.5/+28 mm - Z stroke: 48 mm LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z travel: 35/79.5 mm FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 rpm - X/Z travel: 415/138.5 mm BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V Gsdjuhaw Uepfx Acyoip ACCESSORIES - CNC control: Traub TX8i - Driven guide bushing - Coolant tank - Bar loader: FMB Minimag

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 330 mm, veleno skylė: 78 mm, tekinimo skersmuo virš slankiojančio stalo: 520 mm, centro aukštis: 260 mm, tekėjimo ilgis: 1 500 mm, plunksnos brūkšnys: 127 mm, quill skersmuo: 68 mm, bendras ilgis: 2 670 mm, bendras plotis: 810 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 20 aps./min, lovos plotis: 300 mm, bendras svoris: 2 135 kg, quillo laikiklis: MK 4, Įranga: sūkių greitis be galo kintamas, Centre height: 260 mm Centre distance: 1500 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20–2000 rpm Drive power: 7.5 kW Weight approx. 2135 kg Equipment includes: - Stepless speed control - Hardened and precision-ground Z-axis guideways - Turcite coatings (on the mating surface) of the cross slide and compound slide - Manual central lubrication with a pump for the longitudinal and cross slides Giedpoctutmsfx Acyop - Complete coolant system with rear splash guard and splash protection on the slide - Chuck guard - Control rod with 3 adjustable cams - Machine light - Fixed centre - Set of machine levelling pads

Būklė: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] Giodpfx Aouhaxfscyjp FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] EQUIPMENT - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar loader: LNS TRYTON HYBRID

Būklė: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machinable length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of live positions: 6 - Travel path X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER Gsdeuhawzjpfx Acyjip - Number of positions: 4 COUNTER OPERATION - Number of positions: 4 - Number of live positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 18 kW ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts removal device - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 - Set of jaws and collets for bar feeder magazine - Set of spare parts

Būklė: naudotas, Apvalaus šlifavimo staklės STUDER S20-2 Gisdoxrg Hxopfx Acyop

Būklė: naudotas, CNC ilgo tekinimo automatas TRAUB TNL 12/7 Godpfx Asxbtz Uecysip

Gamybos metai: 2006, būklė: paruoštas naudoti (naudotas), Travels X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15,000N/15,000N/17,500N, feed rate X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6,000rpm. Magazine positions for max. tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in system: 6, coolant tank capacity: 1,500l, 50 bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6,300mm/4,900mm/4,000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring (IPM), remote diagnosis via modem, Renishaw MP10 probe, 4-station rotary buffer (RSP), chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changer, 6x pallets (4x clamping towers with universal clamping strips), approx. 100x HSK 100 tool holders, and Losma filtration system. Documentation available. On-site inspection possible. Expected to be available from the end of January 2025. Giedpfx Acouxdhueyop