CNC staklės Traub TNL 26

Traub TNL 26

Sąlyga: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Dear Sir or Madam, We are offering you a Traub TNL 26 CNC Swiss-type automatic lathe, year of manufacture 2004. The machine is in a well-maintained, fully functional condition. Important Note: This model is equipped with only one turret. The TNL 26 was also produced in versions with two turrets – this listing explicitly refers to the configuration with a single turret. Technical Data (excerpt) Manufacturer: Traub Type: TNL 26 Year of manufacture: 2004 Control system: Traub TX8i-S Turret: 1 unit, mounted below, with 12 tool stations, driven (integrated headstock drive) Bar capacity: 26 / 32 mm Max. main spindle speed: up to 8,000 rpm Drive power: approx. 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) Axes: X1 / Y1 / Z1, C-axis integrated in main spindle Chip conveyor: hinged belt, discharge height approx. 950 mm Machine weight: approx. 4,000 – 4,200 kg Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Condition & Application Tsdpfsxgg Rmjx Ag Rjf The machine is ready for immediate use and is ideally suited for the precise production of small and medium batches in the automotive, medical, and precision engineering sectors. Price & Terms Price: on request / negotiable Delivery: ex location, ex works Inspection: possible at any time by prior appointment. For further information or to arrange a viewing appointment, I am of course always at your disposal. Best regards Arnd Sauter GmbH Björn Sauter

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 205 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 1° - Number of toolholder blocks: 1 TOOLHOLDER BLOCK 1 - Number of positions: 12 - Number of driven positions: 8 - Driven tool speed: 7,000 rpm FRONT TOOL POST - Number of positions: 7 Tjdowcg Tijpfx Ag Rjf SUB OPERATION TOOL POST - Number of positions: 8 - Number of driven positions: 8 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 7 kW WEIGHT AND DIMENSIONS - Footprint: 2334 x 1200 mm - Machine height: 1700 mm - Machine weight: 2,600 kg OPERATING HOURS - Power-on hours: 57,342 h - Operating hours: 31,575 h - Spindle hours: 24,829 h ACCESSORIES - Control: Fanuc 31i-B - Driven guide bushing - Chip conveyor - Parts catcher - Parts conveyor - Parts ejector - Coolant tank - Bar feeder: FMB turbo 3-26 - Electrical transformer

Sąlyga: geras (naudotas), Gamybos metai: 2005, veikimo valandos: 60 764 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6030637, Įrenginys yra geros, paruoštos naudojimui būklės, šiuo metu dar galima apžiūrėti prijungtą prie elektros. Įrenginį turi išmontuoti ir išvežti pirkėjas. Įrenginys turi 2 revolverius po 12 įrankių laikiklių, visi laikikliai yra varomieji. Taip pat yra priekinis įrenginys su 5 įrankių laikikliais (4 iš jų varomieji) ir galinis įrenginys su 5 įrankių laikikliais (4 varomieji). Pagrindinė griebtuvo įvorė – Hainbuch 32, priešinio griebtuvo – Hainbuch Axfix. Gali būti pridėti įvairūs baziniai įrankių laikikliai. Tsdpew N Rziofx Ag Rsf

Sąlyga: geras (naudotas), Gamybos metai: 2005, veikimo valandos: 32 870 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6030578, tekėjimo skersmuo: 32 mm, veleno greitis (maks.): 8 000 aps./min, Strypo skersmuo (maks.): 32 mm, We offer for sale a Traub TNL26K automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Tsdpfevldx Ajx Ag Rjf Sub spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Barfeeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine includes a large number of fixed and driven toolholders – see the attached photo for the list.

Sąlyga: naudotas, 3D Coordinate Measuring Machine ZEISS NUMEREX - Non-Functional Granite Measuring Plate, Granite Table, Measuring Table Tjdpfx Agefy U Ews Rsf Model No. 3648-18, Serial No. X-1019, Year of manufacture approx. 1986 Measuring range: X = approx. 1,250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring plate (L x W): 1,525 x 1,435 mm Usable area: 1,525 x 1,100 mm Plate thickness: 305 mm Clearance width in the gantry: 1,100 mm Probe holder: Ø 9.5 mm Compressed air connection: 6 bar Electrical connection: 230 Volt, 50 Hz - Granite plate with steel inserts with internal threads - Axis adjustment with pneumatic slide guidance for X, Y, and Z axes - Plate mounted on a base frame with 5 adjustable feet, 3 support discs for the feet - Computer and software missing (not present and not included in the scope of delivery) → Not functional! Space requirement (L x W x H): 1,600 x 1,850 x 2,200 mm Machine weight: approx. 2.8 tons Plate damaged on one side, see picture, otherwise in good condition.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 8 000 aps./min, strypo praėjimas: 32 mm, valdiklio modelis: Traub TX8i-S, įrankių magazino lizdų skaičius: 12, Įranga: drožlių transporteris, TECHNINĖS DETALĖS Strypo pralaidumas: 26 / 32 mm Maks. pagrindinio veleno apsukos: 8 000 aps./min Ašys: X1 / Y1 / Z1, C ašis integruota į pagrindinį veleną Revolveris: 1 Įrankių vietų: 12 Variklio galia: 6,7 kW (100 % darbo režimas) / 10,7 kW (40 % darbo režimas) Tjdpfx Asxlfk Nog Ref Sukimo momentas: 21 Nm (100 % darbo režimas) / 32 Nm (40 % darbo režimas) STAKLIŲ DUOMENYS Įjungimo laikas: 116 721 val. Darbo valandos: apie 48 000 val. Valdymas: Traub TX8i-S Matmenys ir svoris Išmatavimai (I × P × A): apie 4,4 × 1,4 × 1,7 m Staklių svoris: apie 4 000 - 4 200 kg ĮRANGA Drožlių transporteris: lankstinė grandinė, išmetimo aukštis apie 950 mm

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 32 [mm] - Max. machinable length: 320 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 3.7 / 5.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 32 [mm] - Spindle speed: 8,000 [rpm] Tjdpfx Aewdalnjg Rsf - Spindle drive power: 2.2 / 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 6,000 (T01-T02-T03) / 4,000 (T04) [rpm] - Driven tool power: 1 [kW] - Travel X/Y: 142 / 348 [mm] TOOL HOLDER 2 - Number of positions: 3 TOOL HOLDER WITH B-AXIS - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 5,000 [rpm] - Driven tool power: 1 [kW] - B-axis travel: 0 - 135 [degrees] SUBSEQUENT MACHINING (COUNTER OPERATION) - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] - Driven tool power: 1 [kW] FRONT DEVICE - Number of positions: 2 - Number of driven positions: 2 - Driven tool speed: 8,000 [rpm] - Driven tool power: 1 [kW] ELECTRICAL SUPPLY - Total power requirement: 21 [kVA] WEIGHT AND DIMENSIONS - Floor space required: 2,150 x 1,280 [mm] - Machine height: 2,010 [mm] - Machine weight: 3,600 [kg] MACHINE HOURS - Power-on hours: 37,855 [h] - Operating hours: 9,578 [h] ACCESSORIES - Control: Fanuc 31i-B5 - Interface: RS232 / PCMCIA / RJ45 / USB - Driven guide bushing - Part extraction - Part ejector - Part conveyor belt - Chip conveyor - Coolant tank: MULLER COMBILOOP CL2 * with high-pressure pump: 100 [bar] - Bar feeder: IEMCA BOSS 338 HD / 32 LL - Electrical transformer

Sąlyga: geras (naudotas), Gamybos metai: 2016, The machine can be inspected at our premises in Immendingen by prior arrangement. Included are the original chip conveyor and a bar feeder from FMB, model 2-20 turbo. Also included is a Kraft & Bauer fire extinguishing system. Tsdpfxsu Rmy Ro Ag Ref

Sąlyga: geras (naudotas), Gamybos metai: 2007, - SIEMENS 840 D control system - Bar passage: 65 mm - Main and sub-spindle, max. speed 5,000 rpm - C-axis, Y-axis Tjdouw Izvepfx Ag Ref - 3 turrets with 12 stations each (all driven) - Driven tool speed: 4,000 rpm - Tool holder: VDI 30 with drive DIN 5480 TRAVEL PATHS X1 = 165 mm, Z1 = 220 mm X2 = 165 mm, Z2 = 150 mm X3 = 165 mm, Z3 = 650 mm, Y3 = 80 mm (+50/-30) ACCESSORIES Coolant system Chip conveyor Bar loader TOP Automazioni XF 375

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, šlifavimo ratuko plotis: 150 mm, šlifavimo disko skersmuo: 305 mm, paskutinio kapitalinio remonto metai: 2025, Grinding wheel diameter 305x150 mm, workpiece diameter 1–40 mm. Machine for plunge and through-feed grinding, PLC control, coolant system, hardened and ground guideways, grinding and regulating spindles mounted hydrodynamically with three-point support, hydraulically adjustable dressers for grinding and regulating wheels, regulating wheel drive adjustable via DS motor, new German-spec electrical system with Siemens components, Siemens S7 control. Tjdpfowi H Uasx Ag Ref