CNC šveicariško tipo tekinimo staklės

TRAUB TNL 12

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, TECHNICAL DATA Spindle Head Maximum Bar Diameter (mm): 13.0 Material Quality (DIN 671) (mm): Ø X h9 Collet, optional: Through-hole Guide Bush, optional: Through-hole Max. Turning Length / Spindle Stroke With Fixed Guide Bush (mm): 130 With Rotating Guide Bush (mm): 80 With Programmable Guide Bush (mm): 80 Spindle Speed: 12,000 min⁻¹ C-Axis Electronic Resolution (degrees): 0.001 Rapid Traverse Z1 (m/min): 30 Tool Carrier 1 Slide Travel X1 (mm): 35 Njdpfx Asyr N Dzjbbswf Slide Travel Y1 (mm): 38 (-10 +28) Rapid Traverse X1 / Y1 (m/min): 15 Tool Stations (number): 6 (12) Turning Tool Cross-section (mm): 8x8 or 12x12 Clamping Range for Driven Drilling Tools (mm): 0.5 - 7 Tool Change Time (sec): 0.3 Tool Carrier 2 Slide Travel X2 (mm): 35 Slide Travel Z2 (mm): 50 Rapid Traverse X2/Z2 (m/min): 15 Tool Stations (number): 6 Turning Tool Cross-section (mm): 8x8 or 12x12 Clamping Range for Driven Drilling Tools (mm): 0.5 - 7 Tool Change Time (sec): 0.3 Driven Tool System for Tool Carrier 1 and 2 Speed (min⁻¹): 0...8000 Maximum Number of Tools: 2x6 Clamping Range for Drilling Tools (mm): 0.5-7 Sub-Spindle / Front Device Maximum Bar Diameter (mm): 13.0 Maximum Longitudinal Stroke 23, 24 / X3 (mm): 140 / 228 Rapid Traverse 23,24/X3 (m/min): 30 Tool Stations (number): 4 Spindle Speed: 12,000 min⁻¹ C-Axis Electronic Resolution (degrees): 0.001 Backworking Attachment, Synchronous / Fixed Z-Axis Stroke Synchronous with Work Spindle (mm): 80 Tool Holder Diameter (mm): 20 Tool Stations (number): 3 Backworking Attachment (X4 Axis) X4 Stroke (mm): 39 Rapid Traverse (m/min): 15 Tool Holder Diameter (mm): 28 Tool Stations (number): 4 Driven Tool System for Backworking Attachment (with X4 Axis) Speed: 0...10,000 min⁻¹ Maximum Number of Driven Tools: 4 Clamping Range for Drilling Tools Driven (mm): 0.5 - 7 Non-driven (mm): 0.5 - 10 Coolant System Pump Pressure, single-stage (bar): 3 120 bar Pump for Front/Rear Attachment Tank Capacity (l): 180 Flow Rate (l/min): 40

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 700 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, Darbo sritis Valdymas: Fanuc 31i-B5 X eiga: 700 mm Y eiga: 400 mm Z eiga: 400 mm Prispaudimo paviršius: 850 x 410 mm Maks. stalo apkrova: 400 kg Greita eiga X/Y/Z ašyse: 54 m/min Pozicionavimo tikslumas: 0,006 mm Kartojimo tikslumas: 0,004 mm Velenas Technologija: tiesioginė pavara Didžiausias sūkiai: 24.000 aps./min Didžiausia galia: 26 kW Nsdpfxeydi Hye Abbowf Didžiausias sukimo momentas: 35 Nm Įrankio tvirtinimas: BBT 30 Įrankių keitiklis Įrankių žurnalas: 21 pozicijų Įrankio keitimo laikas: 1,3 s Įranga Aušinimo skysčio tiekimas: IKZ 20 bar Drožlių šalinimas: drožlių transporteris

Būklė: naudotas, Gamybos metai: 2008, Sukimosi skersmuo: 12,7 mm Sukimo ilgis: 50 mm Valdymas: Traub System TX 8i Sukimosi greitis: 12.000 aps./min c ašis: 0,001° Perėmimo stotis: 12,7 mm Greitas važiavimas: 15 m/min Revolverinė galva (daugiavietė): 6 Įrankių sistema: 5+3 3 įrankių sistemos Bendras galios poreikis: 2,5/4 kW Staklių svoris: apie 2 t Užimamas plotas: apie 2,4 x 1,1 x 1,7 m CNC trumpų detalių tekinimo staklės Traub TNL 12K su LNS Tryton 112 strypų padavėju S8 pavara (galinis apdirbimas su pavaromais įrankiais) yra S7 pavara (priekinis apdirbimas su pavaromais įrankiais) yra Nwodoygm R Ijpfx Abbef

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, veikimo valandos: 19 441 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6000816, tekėjimo ilgis: 50 mm, veleno greitis (maks.): 12 000 aps./min, strypo praėjimas: 12 mm, valdiklio modelis: Mitsubishi TX-8i, priešpriešinio veleno didžiausias greitis: 12 000 aps./min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool turret I (X/Y) Technology: Turret with 6 stations (fully powered) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool turret II (X/Z) Technology: Turret with 6 stations (fully powered) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front attachment Number of stations: 4 Tool holder: Ø28 mm Pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear attachment Number of stations: 4 Tool holder: Ø28 mm Pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control: Mitsubishi TX-8i Dimensions & Weight Spindle height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with electrical cabinet, max. configuration: 2,000 kg Weight without electrical cabinet, max. configuration: 1,600 kg Nwsdpex Hxv Dsfx Abbef Weight with electrical cabinet, min. configuration: 1,200 kg Weight without electrical cabinet, min. configuration: 850 kg Operating hours Control on-time: 19,441 h Automatic operation 1: 7,607 h Automatic operation 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanical interface pre-installed Various fixed tool holders Rinsing gun

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, Bendrieji duomenys Nwjdpfox D Dwfex Abbef Įrenginio svoris: 2200 kg Aukštis: 1700 mm Gylis: 1200 mm Matmenys Įrenginio ilgis: 2200 mm Ši 3 ašių Star SR 20 R III staklė pagaminta 1996 m. Didžiausias tekinimo skersmuo – 20 mm, veleno apsukos iki 8 000 aps./min., greito paėmimo greitis 35 m/min. Idealiai tinka preciziškam tekinimui – turi šešias fiksuotas tekinimo įrankių pozicijas ir penkias radialines varomų įrankių stotis. Jei ieškote aukštos kokybės tekinimo galimybių, apsvarstykite mūsų siūlomą Star SR 20 R III įrenginį. Susisiekite dėl daugiau informacijos. Pritaikymo sritys Tekinimas

Būklė: naudotas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bush): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions Nwodpouhav Djfx Abbef - Number of driven stations on turret: 6 - Max. diameter in sub spindle: 12.7 [mm] - Sub spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] ACCESSORIES - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub spindle - Brake for main spindle and sub spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various fixed and driven tool holders

Būklė: geras (naudotas), Gamybos metai: 2002, TRAUB TNL 12/7 CNC Long Turning Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Nwjdpfxjt E Dbye Abbef Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF DELIVERY Includes (not limited to): Traub TNL 12/7 CNC Turning Machine Meyrat High-Frequency Spindles, 2 units Tool holders (driven and non-driven) FMB Minimag 3200 C Bar Feeder Hydraulic unit High-pressure pump Chip conveyor Exact scope of delivery as shown in the photo series No liability is assumed for the correctness, completeness, or up-to-dateness of the information provided.

Būklė: labai geros būklės (naudotas), Star SA-12 Swiss-Type Automatic Lathe Technical Data Rapid Traverse (X, Y, Z, ZB): 370 mm Maximum Feed Travel (X, Y, Z, ZB): 270 mm Minimum Input Increment (X, Y, Z, ZB): 120 mm Machining Capacity Maximum Turning Diameter: 13 mm Maximum Headstock Stroke: 140 mm Maximum Drilling Capacity: 7 mm Maximum Tapping Capacity: 7 mm Maximum Thread Cutting Capacity: M6 x P1.0 Main Spindle Spindle Speed: 500 – 12,000 rpm Drive: Spindle Drive Main Spindle Motor: 2.2 / 3.7 kW Main Spindle Indexing Angle: 1° or 15° Spindle Bore: 20 mm Tool Slide Type: Linear Slide Number of Tools: 6 tools Number of Driven Tools: 3 tools (Collet: ER 11) Driven Tools Nsdpfx Abowi Ty Ajbowf Spindle Speed: 1,970 / 2,330 rpm Max. Drilling Capacity: 4 mm Max. Milling Capacity: 4 mm Sub-Spindle Max. Clamping Diameter: 13 mm Max. Part Length for Front Ejection: 85 mm Max. Unclamping Length: 30 mm Spindle Speed: 500 – 8,000 rpm Sub-Spindle Motor: 0.5 kW Tool Selection: 4 tools Max. Drilling Capacity: 4 mm Max. Tapping Capacity: M3 x P0.5 Power Supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power Consumption: Average 6.0 KVA SCOPE OF SUPPLY Including (not limited to): STAR SA-12 Swiss-Type Automatic Lathe Control: Fanuc Series 18i-T Fire Extinguishing System Coolant Tank Transformer LNS Bar Feeder Exact scope of supply according to the photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turrets: 2 UPPER TURRET - Number of positions: 6 Nsdpsuhaw Ujfx Abbjwf - Number of driven positions: 6 - X-axis travel: 35 mm - Y-axis travel: -9.5/+28 mm - Z stroke: 48 mm LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z travel: 35/79.5 mm FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 rpm - X/Z travel: 415/138.5 mm BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V ACCESSORIES - CNC control: Traub TX8i - Driven guide bushing - Coolant tank - Bar loader: FMB Minimag

Būklė: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] Nodpouhaxfofx Abbowf - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] EQUIPMENT - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar loader: LNS TRYTON HYBRID

Būklė: naudotas, Gamybos metai: 1996, Verpstuvo praėjimo skersmuo: 80 mm Nwjdpfx Aboxbtqvebof Maks. tekinimo skersmuo: 395 mm Maks. tekinimo ilgis: 750 mm Valdymo sistema: TX 8H Maks. verpstuvo apsisukimų skaičius: 3.150 aps./min. CNC tekinimo staklės | TRAUB - TNA 400 Staklės yra gerai prižiūrėtos būklės.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machinable length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of live positions: 6 - Travel path X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 4 COUNTER OPERATION - Number of positions: 4 - Number of live positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 18 kW ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts removal device - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 Nsdpjuhawzefx Abbswf - Set of jaws and collets for bar feeder magazine - Set of spare parts

Būklė: naudotas, CNC ilgo tekinimo automatas TRAUB TNL 12/7 Nsdpfx Aexbtz Ujbbjwf

Būklė: naujas, Gamybos metai: 2026, Spindle speed steplessly electronically adjustable, 40-4000 rpm Spindle taper MK 2 Table height adjustment by rack and pinion Maximum thread cutting capacity M10 Thread cutting depth adjustable via digital depth display digital speed display digital drilling depth display Drilling depth stop via stop ring Feed/manual Table height adjustment by rack and pinion Continuous/standard drilling capacity in steel: Ø 13 mm / 15 mm Drilling depth: 60 mm Throat: 225 mm Column diameter: 60 mm Usable table surface (W x L): 330 x 250 mm Machine dimensions (W x D x H): 420 x 450 x 860 mm Machine dimensions (with VP) (W x D x H): 452 x 700 x 1130 mm Weight: 62 kg Max. distance spindle/table/base: 300/360 mm Motor: AC with frequency inverter, 230 V, 0.54 kW OPTION: Drilling accessory kit no. 2 - Felix machine vice, jaw width 80 mm, max clamping width 120 mm - Keyless drill chuck 1-13 mm, taper B16 - Morse taper arbor MK II/B16 - Reducing sleeve MK II/MK I Price: €320 Nedeby Swhepfx Abbjwf Factory warranty: 3 years Free delivery including packaging (Germany only) DIDN'T FIND THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT PRODUCT RANGE! REQUEST A QUOTE!

Būklė: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z travel: 35/50 [mm] - Driven tool speed: 8,000 [rpm] FRONT TOOL POST - Number of positions: 4 BACKWORKING - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 18 [kW] ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts catcher - Coolant tank: 200 [l] Nwedpfxsuhawus Abbef - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Bushings: 4 - Set of sleeves and collets for bar feeder magazine - Tool presetting device