Tankai pirkti naudotą (505)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Linz-Land
1 011 km
Detalių valymo sistema, plovimo sistema
GlogarCM 13 - 2 Tank
Skambinti
Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Parts cleaning system / spray cleaning system type CM13
2-tank system (washing + rinsing) including air knife blow-off
Basket diameter: 1,300 mm (octagonal)
Max. load capacity: 1,000 kg
Basket is manually inserted and removed by the operator using a feed trolley positioned in front of the machine (detachable / mobile).
Gisdpfx Apev Tm Ayj Ieu
Usable height: 800 mm
Washing tank: Volume: 430 liters, spray pressure: 6.0 bar
Rinsing tank: Volume: 280 liters, spray pressure: 4.0 bar
Total connected load: approx. 52 kW
Control system: Siemens S7-1200 with KTP700 touch panel
Includes the following equipment:
+ Automatic water replenishment for both tanks
+ Automatic chemical dosing 1-10% (Dosatron)
+ Special spray system (can be activated as required) for small parts (= E-spray system)
+ Side channel blower with height-adjustable air knife system (blow-off drying)
+ Steam extraction including condensate return
+ Weekly timer for electric heating
+ Prepared for retrofitting an oil separator
+ Medium filtration via bag filters (manufacturer: Eaton, Topline) in both circuits (washing and rinsing)
+ Outer cladding with stainless steel sheet
+ Complete system fully insulated
+ Tanks separated into two modules; fully insulated (different temperatures possible)
+ Removable filter baskets in the return flow
+ Stainless steel circulation pumps incl. mechanical seal and soft starter
The system is on display at the Glogar Technology Center and is used exclusively for washing trials.
Aukcionas
Aukcionas baigtas
Województwo łódzkie
503 km
Skaitmeninė spausdinimo mašina
CanonOCE Variostream 8750
Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: VS8750, rezoliucija (maks.): 600 DPI (taškų colyje), popieriaus svoris (min.): 50 g/m², didžiausias popieriaus svoris: 120 g/m², popieriaus plotis (maks.): 495 mm, TECHNINĖS DETALĖS
Formato plotis: min. 165 mm
Formato plotis: maks. 495,3 mm
Spausdinimo plotis: maks. 495,3 mm
Lankstymo atstumas: min. 152,4 mm
Lankstymo atstumas: maks. 406,4 mm
Popieriaus tankis: 50 g/m² iki 120 g/m²
Popieriaus tūris: 1,3 cm³/g ± 0,2 cm³/g
Rezoliucija (automatinė): 240/300 dpi arba 600 dpi
ĮRANGOS DETALĖS
Spausdintuvo 1 serijos numeris: 88.136
Spausdintuvo 1 skaitiklis: 576.660.937
Developerių stotelė pakeista ties: 421.061.210
Giedpfxsyzpu Tj Ap Isu
Spausdintuvo 2 serijos numeris: 88.137
Spausdintuvo 2 skaitiklis: 790.048.906
Developerių stotelė pakeista ties: 638.027.916
Hunkeler atraižų išvyniotuvo serijos numeris: UW6 7183.00835-01/08
Hunkeler atraižų išvyniotuvo pagaminimo metai: 2013
Hunkeler atraižų suvyniotuvo serijos numeris: RW6 7182
Hunkeler atraižų suvyniotuvo pagaminimo metai: 2013
Jungtys: SRA4 kontroleris, IPDS, TCP/IP
APSAUGA
Prisma serveris HP Proliant ML-370-G4
WT4 sukimo perpylimo blokas
Mažas skelbimas
Menslage
1 081 km
TMCI PADOVAN 2x 150hl fermentacijos ir sandėliavimo rūsiai (1994)
TMCI PADOVANGär- und Lagerkeller
Skambinti
Būklė: naudotas, Gamybos metai: 1994, Overview
These two isobaric pressure tanks (each with a capacity of 15,000 L) were manufactured in 1994 by TMCI Padovan, originate from the wine industry and were previously used in sparkling wine production. Featuring a full cooling jacket and a pressure rating of up to 6 bar, these tanks are suitable for the fermentation, maturation, and storage of carbonated products including beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with a food-grade epoxy resin internal coating, embodying a widely adopted technology prior to stainless steel tanks becoming the industry standard. They offer a cost-effective alternative to stainless steel vessels, particularly for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processing. As with all epoxy-coated vessels, regular renewal of the internal coating is necessary depending on usage and product conditions.
TECHNICAL DATA
Manufacturer: TMCI Padovan
Year of manufacture: 1994
Giodpfxjy Hknxe Ap Ieu
Quantity: 2 units
Type: Isobaric pressure tank with full cooling jacket
Applications: Fermentation, maturation, storage of carbonated beverages
Capacity: 15,000 L per tank
Material:
• Shell: Carbon steel
• Internal coating: Food-grade epoxy resin
Insulation: Approx. 100 mm polyurethane with stainless steel cladding
Pressure rating: 6 bar
Dimensions (per tank):
• External diameter: approx. 2,400 mm
• Cylinder height: approx. 4,000 mm
Mažas skelbimas
Menslage
1 081 km
TMCI PADOVAN 4x 200hl fermentacijos ir sandėliavimo rūsiai (1992)
TMCI PADOVANGär- und Lagerkeller
Skambinti
Būklė: naudotas, Gamybos metai: 1992, Overview
These four isobaric pressure vessels (each with a capacity of 20,000 liters) were manufactured in 1992 by TMCI Padovan. Originating from the wine industry, they were previously used for sparkling wine production. Equipped with full-surface cooling jackets and designed for operating pressures up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated beverages such as beer, sparkling wine, and related products.
Gjdpfx Apsy Hkl Ds Ioiu
Constructed from carbon steel with an internal food-grade epoxy coating—a technology widely used before stainless steel became the industry standard—they offer a cost-effective alternative to stainless steel tanks, particularly for producers seeking to minimize capital expenditure. Each tank is fully insulated with a complete cooling jacket, enabling temperature-controlled processing. Due to the coating system, periodic inspection and renewal of the epoxy lining are required depending on usage and product type.
Technical Data
- Manufacturer: TMCI Padovan
- Year of manufacture: 1992
- Quantity: 4 units
- Type: Isobaric pressure vessel with full cooling jacket
- Application: Fermentation, maturation, storage of carbonated beverages
- Capacity: 20,000 liters (200 hl) per tank
- Material: Bottom: Carbon steel
- Internal coating: Food-grade epoxy resin
- Insulation: Approx. 100 mm polyurethane with stainless steel sheathing
- Pressure resistance: 6 bar
- Dimensions (per tank):
- External diameter: approx. 2,200 mm
- Cylinder height: approx. 7,000 mm
- Total height: approx. 9,000 mm
Mažas skelbimas
Menslage
1 081 km
TMCI PADOVAN 5x 100 hl fermentacijos ir saugojimo rūsiai (1985)
TMCI PADOVANGär- und Lagerkeller
Skambinti
Būklė: naudotas, Gamybos metai: 1985, Overview
These 5 insulated pressure tanks (each 100 hl), manufactured by TMCI Padovan in 1985, originate from the wine industry and were previously used for sparkling wine production. Due to their pressure resistance and fully jacketed cooling construction, they are suitable for fermentation, maturation, and storage of carbonated products. The tanks are made from carbon steel with an internal food-grade epoxy coating—a technology widely used in the industry before stainless steel became standard. Although less common today than stainless steel tanks, these vessels offer a cost-effective alternative, particularly for producers with smaller investment budgets. Each tank is fully insulated and equipped with a complete cooling jacket, enabling temperature-controlled processes. Please note that the epoxy coating must be regularly renewed, depending on use and product type.
Technical Data
Manufacturer: TMCI Padovan
Year of manufacture: 1985
Quantity: 5 units
Type: Pressure vessel with full cooling jacket
Application: Fermentation, maturation, storage of carbonated beverages
Capacity: 100 hl per tank
Material:
- Shell: Carbon steel
Gisdpfx Aoy Hkkyjp Iju
- Internal coating: Food-grade epoxy resin
Insulation: Approx. 100 mm polyurethane with stainless steel cladding
Pressure rating: 6 bar
Dimensions (per tank):
- Outer diameter: approx. 2,200 mm
- Cylinder height: approx. 4,000 mm
Atraskite daugiau naudotų mašinų
Mažas skelbimas
Menslage
1 081 km
Sirio Aliberti 8x 500hl fermentacijos ir laikymo rūsiai (2005)
Sirio AlibertiGär- und Lagerkeller
Skambinti
Būklė: naudotas, Gamybos metai: 2005, Overview
These 8 isobaric pressure tanks (each 500 hl), manufactured in 2005 by Sirio Aliberti, originate from the wine industry and were previously used for sparkling wine production. With an operating pressure of up to 6 bar and full insulation, the tanks are well suited for the fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with a food-grade epoxy coating on the inside, combined with polyurethane insulation and a stainless steel outer cladding. This construction method represents a traditional and cost-effective alternative to stainless steel tanks, which became standard in later years. Thanks to their large volume and isobaric capabilities, these tanks are particularly suitable for high-throughput production environments. As with all epoxy-coated vessels, regular inspection and renewal of the internal coating are required depending on operating conditions.
Giodpfxjy Hkkas Ap Iju
TECHNICAL DATA
Manufacturer: Sirio Aliberti
Year of manufacture: 2005
Quantity: 8 units
Type: Isobaric pressure vessel
Application: Fermentation, maturation, storage of carbonated beverages
Capacity: 500 hl per tank
Material:
- Base: Carbon steel
- Internal coating: Food-grade epoxy resin
- Insulation: Polyurethane
- Outer cladding: Stainless steel sheet
Operating pressure: 6 bar
Dimensions (per tank):
- Internal diameter: approx. 3,200 mm
- External diameter: approx. 3,450 mm
- Cylindrical height: approx. 5,250 mm
- Leg height: approx. 1,200 mm
- Total height: approx. 7,800 mm
Mažas skelbimas
Stary Sącz
662 km
Cisterninių konteinerių plovimo stotis
DontalJetPetroClean
Skambinti
Gamybos metai: 2014, būklė: naudotas, Containerised Tanker Cleaning Station JetPetroClean
Manufacturer: OU Dontal, Estonia
The installation is designed for cleaning the interior of tanks after petroleum products, particularly railway tank wagons. The cleaning process operates in a closed-loop system using hot water or hot water with detergents. Cleaning is performed by introducing a washing head through the top manhole of the tanker, then washing the tank interior under specified pressure. The dirty water is drained via the lower fill points of the tanker using diaphragm pumps into a container tank. There, after separating impurities, the water is recirculated for further cleaning. Cleaning one tanker takes approximately 1 hour. The next step is drying the inside of the tank and removing solid waste from the interior using extraction fans. After the cleaning process is completed, the installation is purged and dried with compressors.
1. Main Container Unit:
- 20-foot container – year of manufacture: 2014
- two Lowara main pumps – year of manufacture: 2014
- hydraulic installation with pressure gauges
- wash water tank (rinse water tank 5,770 L, waste tank 2,540 L)
- control cabinet
- air receiver
2. Auxiliary Unit:
- 20-foot container – year of manufacture: 2012
- two GD ESM 11-7.5A compressors – year of manufacture: 2013
- gas generator – year of manufacture: 2015
- control cabinet
- Meganex 15 kW electric heaters – year of manufacture: 2014
- four Soler&Palau CBRT/2-502 5.5 kW fans – year of manufacture: 2014
- two diaphragm pumps
Gsdpfx Apehgimdo Ieiu
- air receiver
3. Waste container in containerised housing
4. Rigid steel pipework and flexible plastic hoses
5. Structures, platforms, stairs, and railings for tanker servicing
6. Washing heads, elbows, valves, and other hydraulic system components
Technical condition: used installation, requires technical inspection prior to recommissioning.
Mažas skelbimas
Perriers-sur-Andelle
1 652 km
Naudotas TIBILETTI ventiliuojamas stacionarus vežimėlio krosnis 400x800
TIBILETTI6775986
Skambinti
Būklė: labai geros būklės (naudotas), - Vežimėlio matmenys: 400x800 arba 400x600 mm
- Talpa: 40 batono
Giedowxxh Dopfx Ap Isu
- Dvigubas izoliuotas stiklas, žemo emisijos lygio, vėdinamas, lengvai valomas
- Durys su dvipusiu užraktu
- Nerūdijančio plieno vyriai, 6 mm storio
- Kepimo kamera iš nerūdijančio plieno
- Izoliacijos storis 50 mm, dvigubo tankio akmens vatos plokštės
Mažas skelbimas
Perriers-sur-Andelle
1 652 km
Teigiama/neigiama šaldymo kamera, 80 mm
MERCATUSO2-S-10702026-0-0-0
Skambinti
Būklė: naudotas, Išoriniai matmenys: 2600x2900x2110 mm
Vidiniai matmenys: 2400x2700x1950 mm
Sienelių storis: 80 mm
Temperatūra: -2+8 ºC / -18-23 ºC
Šaltnešis: R452A
Klimato klasė: 5
Šaldymo blokas iš anksto sumontuotas ant panelės
Automatinė kondensato vandens išgarinimo sistema
Vidinis apšvietimas
Plokščių apdaila: specialiai maisto pramonei skirta, dažyta skarda, šviesiai pilka spalva
Segmentacija: 300 mm žingsnis, naudojant 300, 600, 900 ir 1200 mm plokštes
Panelių jungimo sistema su dvigubais kabliais
Apvalios durys ir 45° kampu pjauti vidiniai kampai
Ergonominė rankena su užraktu ir avarinio atidarymo sistema
Slėgio balansavimo vožtuvas
Grindys iš nerūdijančio plieno su neslystančia danga
Durys reversuojamos, automatiškai fiksuojasi 90°, galimi du dydžiai, atidarymo plotas: 600 mm ir 700 mm
Gjdpsx Eyhfsfx Ap Ijiu
Vyriai su nuolydžio sistema
CFC neturintis poliuretano užpildas, įpurškiamas aukštu slėgiu, tankis – 41 kg/m³.
Mažas skelbimas
Perriers-sur-Andelle
1 652 km
Naudota TIBILETTI stacionari ventiliuojama krosnis 400x800
TIBILETTI7309585
Skambinti
Būklė: labai geros būklės (naudotas), - Vežimėlio matmenys: 400x800 arba 400x600 mm
- Talpa: 40 baguette
- Batinox 1648 ERGO2
- Serijos numeris: BA31595
- Įtampa: 400 V + N / 50 Hz / 60A
- Dvigubas izoliacinis stiklinimas, mažo emisijos lygio, ventiliuojamas, lengvai valomas
- Durys su dvigubu užrakinimo mechanizmu
- 6 mm storio nerūdijančio plieno vyriai
- Kepimo kamera iš nerūdijančio plieno
Gsdpfx Aowxxhwsp Ieiu
- 50 mm storio dvigubo tankio vatos plokštės
- Atnaujinta įranga: įranga paruošiama pagal užsakymą; pristatymo ir grąžinimo terminai suderinami individualiai (kainą pateikiame po atnaujinimo prašymo).
Mažas skelbimas
Forst
1 237 km
4 x 40 m³ pieno talpos, izoliuotos, šaldomos
SerapFirst SV 2.0
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 40 000 l, naudojamo bako talpa: 40 000 l, bendras aukštis: 7 835 mm, išorinis skersmuo: 3 000 mm, bendras svoris: 3 500 kg, sienų medžiaga: nerūdijantis plienas, sienos konstrukcija: vienos sienos, Kamerų skaičius: 1, liuko vieta: pusė, Įranga: aušinimo blokas, 4 x 40 m³ Agitator Tanks (Milk Tanks), Stainless Steel, Insulated, Actively Coolable
Technical Data / Dimensions
Available units: 4
Volume: approx. 40,000 litres
Tank type: Agitator tank
Condition: unused
Food-grade: yes
Design: vertical
Internal diameter: approx. 2,950 mm
External diameter: approx. 3,000 mm
Cylindrical height: approx. 6,500 mm
Total height: approx. 7,810 mm
Wall thickness: approx. 1 mm
Specific medium weight: 1 t/m³
Operating pressure: non-pressurised
Material / Construction
Internal shell material: stainless steel
Grade: V2A-1.4301 (AISI 304)
Internal weld seams ground and polished
Heating / Cooling System
Heating / cooling system: included
Number of cooling zones: 1
Base: evaporator
Cooling medium: coolant / refrigerant gas
Operating pressure: 18.6 bar
Remarks: Each tank includes a cooling unit with direct evaporation (12 kW) that must be connected to the tank’s refrigerant circuit. The unit is designed for cooling from 20°C to 4°C at an ambient temperature of 32°C.
The refrigerant was evacuated during disassembly; cooling units are supplied loose with the tanks. The connection and recommissioning of the cooling units and refrigerant circuit must be performed by a licensed HVAC contractor (not included in sale price)!
Insulation
Insulation: included
Insulation thickness: approx. 50 mm
Insulation material: PU foam
Insulation jacket material: aluminium
Insulation jacket: screwed/riveted
Remarks: Cladding made of aluminium trapezoidal sheeting, painted in RAL 9006 (White Aluminium)
Equipment
Support frame: base ring/stand collar
Quantity: 1 per tank
Fixing: fixed mounting
Upper base: conical bottom
Lower base: conical bottom
Top head features:
1 x agitator port incl. agitator
2 x crane lugs
1 x snow guard
2 x CIP (Clean-In-Place) connections
1 x inspection opening (ø approx. 400 mm) with closure
1 x threaded nozzle NW 65 for aeration system
Shell:
1 x manway, oval (approx. 340 x 440 mm)
1 x sampling valve
1 x Rainbow automatic cleaning system incl. dosing pumps, control unit and control cabinet
1 x insulated operator room (attached), made from sandwich panels with lockable door (dimensions approx. 1,940 x 1,640 x 810 mm)
1 x cleaning line
Various ports for instrumentation and control
Lower base:
1 x residual drain DN 80
Gjdpfxoy Uciwo Ap Ieiu
Remarks: The system consisting of 4 tanks is currently interconnected by a central walkway. The walkway and associated two-way access ladder are optionally available.
Agitator
Agitator: included
Type of agitator: beam agitator
Classification: slow-running
Number: 1
Mounting: top entry
Speed: 24 rpm
Number of agitator levels: 3
Length of agitator elements: approx. 500 mm
Bottom bearing for agitator shaft included
Remarks: Agitator designed for homogenising milk fat (slow-turning agitator motor at 24 revolutions per minute)
Documentation
Drawing available
Mažas skelbimas
Vokietija
1 153 km
20 000 litrų dyzelino bakas su siurbliu
WozniackDieseltank Heizöltank
Skambinti
Būklė: naudotas, Gamybos metai: 2012, mašinos/transporto priemonės numeris: DK25P, Dear Sir or Madam,
We are pleased to offer the following:
20 m³ nominal volume
tank, used and overhauled (ground, primed, and painted in desired color)
Includes manufacturer’s/test certificate according to DIN 6616-D.
Material: S235JRG2 steel, steel-in-steel design
Double-walled above-ground tank, suitable for installation outside of earthquake or flood-prone areas.
Design: cylindrical shape on saddle supports
Tank dimensions:
Length: approx. 6,840 mm Diameter: approx. 2,000 mm Weight: approx. 3,500 kg
Giedocl Sfbepfx Ap Ieu
Color: Custom RAL paint finish according to customer’s specification
Equipment includes:
- 3” fill pipe with TW cap (filling cap)
- 1¼” suction pipe
- Dipstick and dipstick cap, tank content gauge
- 1½” vent connection with cap
- Overfill prevention sensor with type approval
- Visual leak detection unit (optical, LAS with filled leak detection fluid)
- Access ladder supplied loose for lateral mounting
Diesel pump Cube 70
70 l/min
4 m dispensing hose (extendable)
Motor: 0.5 kW, 230 V, 4.2 A
Includes tank brackets, piping, ball valve, and anti-siphon valve installed.
Optional:
80 l/min diesel dispenser with data acquisition
+++++
Of course, you can also help design your tank system!
We are happy to accommodate your color and equipment preferences wherever possible.
All our units are thoroughly inspected and tested by selected staff at our facility.
Affordable delivery can be arranged upon request.
Inspection of our tanks is possible at any time.
Further storage tanks for above-ground and underground installation are available in a range of sizes and can be viewed for sale at our premises.
Have we convinced you of our offer?
If you have any questions or requests, simply give us a call—one of our experienced staff will be happy to advise you.
We are also interested in purchasing used tank systems at any time.
Trade-ins of existing units are possible.
Best regards from Warstein,
Tank & Environmental Protection Wozniack
Mažas skelbimas
Vokietija
1 153 km
Dyzelino degalinė su išpylimo zona
Skambinti
Gamybos metai: 2011, būklė: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: 10.000 Ltr, Tank & Environmental Protection Wozniack – WHG-Certified Specialist Company
Dear Sir or Madam,
We are offering a 10,000-liter double-walled storage tank for diesel fuel, with the following specifications:
Nominal capacity: 10 m³
Quantity: 1
Condition: used but fully refurbished (the tank has been cleaned, overhauled, primed, and painted)
Color: according to your choice (RAL shade)
Material: Steel-in-steel, grade S235JRG2
Documentation: Manufacturer’s certificate/testing certificate per DIN 6616 D/2 and nameplate
Design: Cylindrical, horizontal tank on two welded saddle supports (ground clearance approx. 100 mm)
Interstice monitoring: Double walls with filled leak detection fluid
Tank dimensions:
- Length approx. 5,350 mm plus diesel pump 600 mm
- Diameter approx. 1,600 mm
- Weight approx. 2,000 kg
Fittings/Equipment:
- 500 mm manway with cover, bolts, and seal
- 2" filling pipe with TW coupling/fill cap (3" from 20 m³ capacity)
- 1¼" suction pipe
- Dipstick and closure, tank content gauge
- 1½" vent stub with cap
- Overfill prevention (approved design)
- Visual leak detection unit (LAS) with leak fluid
- Access ladder for side mounting, delivered loose
Tank approved for installation outside earthquake/flood zones.
Diesel Dispenser with Data Capture
Godpfx Aecl Sb Rjp Ioiu
- Type: HDM80eco LTE
- Flow rate: 75 l/min
- Cloud-based basic module free of charge
- Overview of refuelling by user, time, location, and quantity
- Refuelling via tank key or PIN entry
Filling area/refuelling pad:
- Type: KAP system, galvanized
- Area with drive-on ramps (mm): approx. 2,650 x 5,300
- Area without ramps (mm): approx. 2,500 x 5,000
- Bund height (mm): approx. 60
- Nationwide general building authority approval
- Permitted for installation outdoors and indoors
(With flip lid and lead-through pipes for outdoor setup)
- 2 collection trays, each 150-liter capacity
===
Top offer: Liquid fertilizer (AHL) tank systems available from 10,000 to 100,000 liters.
You can also help design your own tank system!
All our systems are thoroughly checked by selected employees in our company.
Economical delivery on request.
Inspection of our systems is possible at any time.
Other aboveground and underground tanks in all sizes are available for sale on our premises.
Did our offer convince you?
If you have any questions or requirements, simply call us – one of our experienced staff will be happy to advise you.
Price / Shipping
The price for the tank station is ex location Warstein, loaded free of charge.
Delivery can be provided at low cost by arrangement.
Delivery time: by agreement
You will receive an invoice with VAT shown separately.
Additionally, we buy existing tank systems and, as a WHG-certified specialist company, can professionally empty, clean, dismantle, and remove them.
Kind regards from Warstein,
Tank-Umweltschutz Wozniack
Mažas skelbimas
Gruzija
1 410 km
Naudota pilna Krones PET išpilstymo linija – 22 000 bph
GEA
Skambinti
Būklė: naudotas, Gamybos metai: 2010, veikimo valandos: 47 000 h, mašinos/transporto priemonės numeris: LC582, Used Complete Krones PET Bottling Line – 22,000 BPH – Overview
This used, ultra-clean Krones PET bottling line is a comprehensive, highly efficient solution for beverage production and industrial packaging in the categories of cider, carbonated mineral water, still water, and carbonated juices. Built by Krones and GEA in 2010 and maintained in operation with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L). It features a Contiform S12M stretch blow molder directly integrated with an ultra-clean isobaric filler-capper block. This ready-to-market used bottling line is designed for reliability, hygiene, and quick PET format changes.
Technical Specifications & Performance Data
Manufacturer: Krones and GEA
Year of manufacture: 2010
Operating hours: approx. 47,000
Giodpfxsyhbmto Ap Iou
Rated output: 22,000 bph (0.5 L) | 18,000 bph (1.5 L)
Processed products: Cider, carbonated mineral water, still water, carbonated juices
Filling technology: Ultra-clean, isobaric, volumetric PET filling
Current product: Apple juice with water and CO2
Neck finishes: PCO 1810, PSO 28 mm, 1810/1881 short neck
Controls: Siemens Simatic S7 PLC platform
Main Scope of Supply
CIP: Krones VarioClean F AUT fully automatic CIP system, 4 x 5000 L, 30 m³/h
Process: GEA TDS unit with flash pasteurizer, mixer, carbonator, degasser, and process tanks
Preforms: Preform tipper and infeed conveyor; Krones Contifeed RS preform feeding system; Prejet linear preform cleaning unit
Closures: Cassner cap feed with cap rinsing and sterilization
Stretch blow molder: Krones Contiform S12M, directly linked to the ultra-clean block (no air conveyor)
Filler/Capper block: Krones Volumetric VODM-PET 2.160-66-103 with integrated capper; Krones Vario Dos block cleaning unit
Coding and inspection: Domino DDC 3 laser coder; Krones Checkmat 731 FM-X+L level control; Krones Checkmat 731 EM label inspection
Conveying and inspection: SYNCO bottle conveyor; Krones Flowliner bottle leak tester
Labeler: Krones Contiroll OPP 720-15, double roll-feed wraparound labels with hotmelt
Secondary packaging: Krones VarioPro FS shrink-tray packer; Krones Multico S pack conveyor; Twin Pack carry handle applicator
Pack coding: Leisinger Jet 3 ink coder
Palletizing: Krones Robopox Modulpal (2016)
Advanced Automation & Control Systems
Line control & PLC
Siemens Simatic S7 series PLC for coordinated line control, interlocks, and diagnostics
Integrated…
Mažas skelbimas
Goor
1 182 km
Balu presas
BOAD130 A 110KW
Skambinti
Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 130 t, pildymo angos plotis: 1 620 mm, pildymo angos ilgis: 972 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, bendras svoris: 43 000 kg, garantijos trukmė: 6 mėnesiai, slėgis: 280 juosta, alyvos bako talpa: 2 450 l, galia: 110 kW (149,56 AG), paskutinio kapitalinio remonto metai: 2026, This Impress D130-A-110 kW is in like-new condition and has been fully refurbished. The press has been completely rebuilt, with almost all components replaced by new parts. Only the frame and a few mechanical components remain from the original assembly.
The main cylinder has been fully overhauled. In addition, all electrical components and the entire hydraulic control system have been replaced with new parts. The control cabinet is also entirely new, ensuring maximum reliability, safety, and operational security.
Gjdpsy Tm H Refx Ap Ioiu
The standard configuration of this machine features horizontal tying. Thanks to the prepared frame, this baler can also be supplied with both horizontal and vertical tying on request, making the machine flexible for various material streams.
Applications
Paper and cardboard, mixed streams, plastic films, PET bottles, containers, (long) agricultural films, plastic tanks, car tires and bumpers, and much more.
As you have come to expect from BOA, this second-hand machine can also be supplied with technical support, parts provision, and expert advice.
Mažas skelbimas
Brzesko
619 km
Taski Procarpet 45 kilimų valytuvas
TaskiProcarpet 45 Carpet Cleaner NEW!
Skambinti
Būklė: naujas, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 450 mm, plotas našumas: 495 m²/val, bendras svoris: 55 kg, garantijos trukmė: 12 mėnesiai, įėjimo įtampa: 230 V, vandens talpos tūris: 45 l, Technical Data:
Model: Procarpet 45
Manufacturer: Taski
Type: Carpet and Upholstery Cleaning Machine
Country of Manufacture: Switzerland
Series: Professional
Condition: New
Theoretical Performance: 495 m²/h
Empty Weight: 55 kg
Working Width: 450 mm
Brush Motor: 650 W
Gisdey Aw A Uopfx Ap Iou
Vacuum Motor: 1000 W
Fresh Water Tank: 45 l
Recovery Tank: 45 l
Brush Speed: 1000 rpm
Brush Pressure: 10–17 kg
Cable Length: 15 m
Rated Voltage: 230 V
Dimensions: 82 x 56 x 86 cm (L x W x H)
Why Taski Procarpet 45?
The Taski Procarpet 45 combines high performance, versatility, and professional cleaning quality. Designed for large areas, its 45 cm working width and large 45-litre tanks enable long and uninterrupted cleaning sessions, enhancing work efficiency.
One of its greatest advantages is the 2-in-1 system that allows you to choose between deep extraction cleaning and fast encapsulation cleaning. This lets you optimally adapt the cleaning method to the level of dirt and available time – from deep cleaning to quick interim cleaning with shorter drying times.
Another significant advantage of this machine is its efficiency. The cylindrical brush and high-performance dual vacuum system ensure thorough dirt removal and optimal carpet drying. The result: better cleaning performance and faster return to service for cleaned carpets.
User-Friendliness and Ergonomics:
The control panel is intuitive and user-friendly, while the machine’s design provides an excellent view of the working area.
Professional Cleaning:
The machine is equipped with a 45 cm working brush and a 45-litre tank, striking the perfect balance between compactness and the capacity to clean larger areas.
Perfect for Daily Use:
The Taski Procarpet 45 is a robust, durable, and reliable machine, engineered for longevity and demanding professional applications.
Mažas skelbimas
Vokietija
1 106 km
Vakuuminis presas
MSMVPS 3514 Professional
Skambinti
Gamybos metai: 2026, būklė: naujas, New machine
Year of manufacture: 2026
The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm.
Gisdpfjywpt Iex Ap Iou
Technical basic equipment of the vacuum press:
Unless otherwise agreed, the vacuum press is powder-coated in RAL 7012 and RAL 7035 as standard. Special color options are available upon request, must be clarified in advance, and may incur additional costs.
Welded table construction for professional use, mounted on a swiveling carriage, fitted with 4 castors, surface load capacity: 150 kg. When not in use, the machine can be swiveled and locked to save space, reducing the depth requirement to only 800 mm. The table surface is made from a 22 mm thick MDF laminate panel, covered in the pressing area with a slotted MDF vacuum distributor plate.
The membrane frame opens with the support of 2 gas springs mounted laterally on the machine. A natural rubber membrane (2 mm thickness, 780% elasticity, temperature resistant up to 70°C) is installed, fixed with a clamping system for rapid membrane replacement. The pressing chamber is fully sealed with a continuous gasket profile integrated in the membrane frame.
Oil-lubricated vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks with a total volume of 200 liters. Press chamber evacuation and aeration are performed via a 3-way ball valve located at the front of the machine.
The machine is pre-assembled and delivered on a pallet. Please note that a forklift with sufficient lifting capacity and fork length is required for unloading.
Optionally, you can book initial commissioning and a brief operating instruction session provided by one of our technicians. If required, we are happy to provide a separate quotation for this service.
Summary of key specifications:
- Welded frame construction
- Highly flexible natural rubber membrane, thickness: 2 mm, elasticity: 780%, high recovery capability, suitable for temperatures up to 70°C
- MDF vacuum distributor plate
- Digital vacuum control VAK-CONTROL 1 with automatic shut-off
- Vacuum pump: oil-lubricated, 40 m³/h
- Max. vacuum: -0.99 bar
- Max. pressing pressure: up to 9.9 t/m²
- Connected load: 1.40 kW (400 Volt)
- Vacuum tank: 200 liters
- 4 swivel castors with locking brakes
- Additional 13 mm vacuum connection
- Pressing area: 3500 x 1420 mm
- Table height to vacuum distributor plate: approx. 895 mm
- Machine height closed: approx. 960 mm
- Machine height closed with cover plate: approx. 1030 mm
- Operating dimensions: 3790 x 1700 x 2150 mm (LxWxH)
- Dimensions when swiveled: 3790 x 800 x 1750 mm (LxWxH)
Customs tariff number: 84659400
Net weight: 570 kg
Gross weight: 660 kg
Incl. cover plate 3514
A cover plate not only protects your membrane from UV radiation, but also converts your vacuum press with base frame into a mobile worktable that can be used flexibly throughout your business.
- Coated cover plate
- Rigid, welded steel frame
- Opening assistance via gas springs
Customs tariff number: 84669280
Net weight: 105 kg
Gross weight: 105 kg
The cover plate can only be supplied together with a vacuum press.
Mažas skelbimas
Wielsbeke
1 446 km
Aliumininis silosas
ELLIMETALL1996-2014
Skambinti
Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Aliumininis silosas
Gamintojas: Ellimetal Silobouw N.V., Belgija
Pagaminimo metai: 2001
Užsakymo/serijos numeris: 5/1313-S5
Pagrindinis produktas: PVC sausas mišinys
Tūrinis tankis: 0,7 kg/dm³
Maksimalus tūris: 66 m³
Maksimalus svoris/talpa: 46,2 tonos
Darbinis slėgis: Atmosferinis, t.y. ne slėginis silosas
Gjdpezam Aqsfx Ap Ijiu
Darbinė temperatūra: Aplinkos temperatūra
Tuščio svoris: 1 650 kg pagal užrašų lentelę
Apačioje sumontuota Coperion iškrovimo sistema. Tai aukštos kokybės sistema, dažniausiai naudojama plastikų milteliams ar granulių mišiniams.
PVC sausas mišinys: apie 46 t
Miltai apie 0,55–0,65 kg/l: apie 36–43 t
Cementas apie 1,0–1,4 kg/l: apie 66–92 t, tačiau pagal ženklinimą silosas yra skirtas tik iki 46,2 t
Sausa pjuvena apie 0,12–0,25 kg/l: apie 8–16 t
Mažas skelbimas
Gargždai
169 km
Diržinis presas
ProFruit MachineryPOWERPRESS 1500
Skambinti
Gamybos metai: 2026, būklė: naujas, The mash on the belt is pressed against cylinders, and the extracted juice flows into collection trays located beneath the press. The pressing process of the Band Press 1500 is continuous.
Capacity: 1,500 kg/h
- The most advanced feature of our POWERPRESS line is the integrated pump and collection tank in the Band Press 1500. This not only saves you the cost of a separate tank and pump, but also valuable floor space.
Gedpeflpp Esfx Ap Ijiu
- Apple juice yield with our band press is approximately 75%.
- The collection tray is equipped with a sieve system, ensuring that the juice is filtered as part of the pressing process. This results in an even purer product.
- The band press operates automatically. When the mash hopper is full, the machines upstream of the band press are automatically shut down. When the collection tray is full, the juice pump transfers the juice to the tanks.
- The band press features a high-pressure cleaner that continuously washes the machine's belt. Our belt washing system is simple, contains no motors or reduction gears, which increases lifespan and reduces maintenance costs.
- After operation, the band press should be washed manually using a water jet. A complete cleaning procedure takes about 15–20 minutes. Cleaning is straightforward and all parts of the band press can be easily removed without tools.
- Belt tension is adjustable.
- The machine is made entirely from stainless steel and features adjustable feet.
- Easy to clean without closed or inaccessible areas; all parts are simple to assemble.
Mažas skelbimas
Gargždai
169 km
Belt Press for Juice Production
ProFruit MachineryPOWERPRESS 400
Skambinti
Gamybos metai: 2026, būklė: naujas, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous
Capacity: 400 kg/h
The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs.
The juice yield of apples using our belt press is ~75 %.
There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 400 filtrates the juice even during the pressing stage providing cleaner and more pure product.
The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks.
The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs.
After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools.
Belt tension is adjustable.
Machine is made entirely of stainless steel and has adjustable feet.
Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.
Interested in belt press only with different efficiency? Check out our other belt presses: POWERPRESS 800, POWERPRESS 1200, POWERPRESS 1500.
Gijdpfoflpnysx Ap Iju
Mažas skelbimas
Cascina Faustina
1 511 km
VERTIKALUS APDIRBIMO CENTRAS
QuaserMV 204 II
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, 3-axis machining center, CNC FANUC 18MC
Equipped with:
- High-pressure coolant through the spindle
- Hinged belt chip conveyor
- Spindle chiller
- Manuals
- CE certificate
TRAVELS
X-axis (longitudinal table movement): 1020 mm
Y-axis (cross table movement): 600 mm
Z-axis (vertical head movement): 560 mm
TABLE
Distance table – spindle: 150/710 mm
Table dimensions: 635 × 1200 mm
Max load capacity: 1000 kg
SPINDLE
Table with T-slots: 6 × 18 mm h8 T
Max speed: 10,000 rpm
Number of speed ranges: 1
Max torque: 192 N·m
Gisdoxfguvopfx Ap Ieu
Taper: No. 40
Inner bearing diameter: 70 mm
FEED RATES
Rapid feed: 32,000 mm/min
Working feed: 1-20,000 mm/min
Jog feed: 4,000 mm/min
Thrust (x & y/z): 7,400 / 13,500 N
ATC (Automatic Tool Changer)
Tool holder taper type: ISO 40 [BT-40]
Number of tools: 24 [32]
Max tool diameter: 88/125 mm
Max tool length: 300 mm
Max tool weight: 7 kg
Selection method: Random
Tool change time: 2.5 sec
Chip-to-chip time: 6 sec
MOTORS
Spindle drive: 15/11 kW
Servo motors (x & y / z): 2.1 / 3.8 kW
Coolant pump: 0.5 kW (nozzles)
+1.4 (wash)
ELECTRICAL
Power capacity: 30 kVA
TANKS
Lubricant: 4 l
Coolant: 400 l
DIMENSIONS
Height: 2,825 mm
Floor space: 2,650 × 2,200 mm
Weight: 7,500 kg
NOTE: Machine only, vises and tools are not included in the sale.
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Estavayer
1 503 km
2 stačiakampės nerūdijančio plieno talpos
5700 l
Skambinti
Būklė: geras (naudotas), - Material: Stainless steel AISI 316
- Standing on legs
Giodpfxovlkgas Ap Isu
- Tanks, top, contoured to fit vaulted cellar ceilings
Dimensions:
- Width: approx. 1150 mm
- Depth: approx. 1800 mm
- Total height, rear: 2500 mm
- Total height, front: 3650 mm (including manway dome)
- Ground clearance: 340 mm
Equipment/features:
- Rectangular manhole 320 x 420 mm
- Residual drain: Tank slide valve DN 40, Friedrich No. 2
- Clear drain: Tank slide valve DN 40, Friedrich No. 2
- Sample cock
- Level indicator
- Dome NW 200
Mažas skelbimas
Hannover
979 km
2 x 80 m³ aliuminio silosai, Ø 3.000 mm
Zeppelin
Skambinti
Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, 2 x aliuminio silosas su ilga atramine apatine briauna ir filtro nameliu, ø 3 000 mm, pritaikyti specifiniam tankiui 0,6 kg/dm³
Gsdpfx Apegh Dgbj Ijiu
Gamintojas: Zeppelin
Talpa: apie 80 000 l
Skersmuo: apie 3 000 mm
Bendras aukštis: apie 16 000 mm
Svoris: apie 2 000 kg
Specifinis tankis: 0,6 kg/dm³
Jungtys ir prijungimai:
Viršutinėje dalyje:
1 x krano kilpa
Filtro namelyje:
1 x filtro rėmas, apie 900 x 1 000 mm su vėdinimo anga
1 x žmogaus angos dangtis DN 600
3 x jungtys reguliavimo/matavimo technikai (įskaitant silopilot, min-max daviklį ir kitus jutiklius)
Cilindro korpuse:
1 x durys su užraktu į filtro namelį
1 x pravažiavimo durys (kūgis)
1 x signalinė lempa
Įvairios angos užpildymo vamzdynams
Silo baigiasi 60° kūgiu.
Abu silosai turi dviejų takų kopėčias su apsauginiu atlošu.
Mažas skelbimas
Barbing
1 051 km
Stiklo plovimo mašina
SchiavoHydro 3000.6
Skambinti
Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Schiavo Hydro 3000.6
Vertical Glass Washing Machine with Pre-wash Zone, Main Washing Zone and Drying Zone
Wet area constructed predominantly from stainless steel and moisture-resistant materials.
Gisdswd N Urjpfx Ap Iou
150 mm single-piece washing brushes with stainless steel core
Includes water tanks for water treatment
Includes fan for glass drying
Discharge area with inspection lamps
Processing dimensions:
Max. glass height: 3000 mm
Glass thickness: 3-22 mm
Brushes: 6 units
Connected load: 22 kW
Mažas skelbimas
Vokietija
999 km
Išpilstymo linija
Augenstein/Alcoa/PaceRI 1600-48-6/IFM 420-2/M-400 PR SSD/MSA
Skambinti
Gamybos metai: 2006, būklė: paruoštas naudoti (naudotas), Parduodama pilna butelių plovimo ir užpildymo linija. 1) Rotacinė butelių plovimo mašina Augenstein RI 1600/48/6, pagaminimo metai: 2006. 2) Užpildymo mašina Deckert Rudolf IFM 420-2, pagaminimo metai: 2003. 3) Butelių orientavimo įrenginys Pace Packaging M-400 PR SSD, pagaminimo metai: 2004. 4) Butelių uždarymo mašina Alcoa 6208/360, pagaminimo metai: 2003, įskaitant dangtelių padavimo sistemą Augenstein, pagaminimo metai: 2008. 5) Pakavimo ir etiketavimo linija Sleever MSA 5120 LS4, pagaminimo metai: 2013, etiketės: shrink-sleeve, garo sunaudojimas: 150 kg/val. 6) Svarstymo ir metalo detektoriaus modulis Mettler Toledo XS3, pagaminimo metai: 2008. Linijos našumas: 9000 butelių/val., butelio talpa: 150 ml, užpildymo tūris: apie 150 cm³, didžiausias butelio skersmuo: 48,9 mm, butelio aukštis: 115,5 mm, pildymo terpės tankis: 1335 kg/m³. Yra visa dokumentacija. Galima apžiūra vietoje.
Godpfsy I Ac Djx Ap Ioiu
Palengviname jums paiešką: "tankai"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.























































































































































































