Skystos trąšos AHL/ASL 100 000 litrų

Gamybos metai

2000

Būklė

Naudotas

Vieta

Warstein

Rodyti žemėlapį

Duomenys apie mašiną

Mašinos pavadinimas:: Skystos trąšos AHL/ASL 100 000 litrų

Gamybos metai:: 2000

Būklė:: naudotas

Kaina ir vieta

Vieta:: Enkerbruch 2, 59581 Warstein, Deutschland

Skambinti

Pasiūlymo informacija

Skelbimo ID:: A2990865

Atnaujinimas:: paskutinį kartą atnaujinta 23.05.2024

aprašymas

Tank & Environmental Protection Wozniack – Certified WHG Specialist Company

Dear Ladies and Gentlemen,

We offer a 100,000-liter double-walled storage tank for the storage of liquid fertilizer, with the following features:

The storage tank is internally fitted with a factory-new plastic inner lining, specifically designed and resistant for liquid fertilizer storage. An acoustic leak detection device is installed externally in a lockable protective cabinet. The storage tank itself is also double-walled, made entirely of steel.

The plastic inner lining has a general building authority approval and is therefore authorized and suitable for the storage of liquid fertilizers such as AHL as well as NOX reduction agents AUS32 (AdBlue).

Specifications:
- Nominal capacity: 100 cbm
- Quantity: 1
- Used but fully refurbished: the vessel has been cleaned, reconditioned, primed, and painted
- Color: RAL coating as requested. Custom colors available upon request.
- Material: steel-in-steel, material grade S235JRG2
- Documentation: Manufacturer’s and inspection certificates according to DIN 6616 D/2 and type plate
- 1 dipstick
- 1 vent connection
- 1 3" fill socket, new V2A stainless steel
- 1 new acoustic leak detector for the double-walled system
- 1 ladder
- 1 3" suction line, new V2A stainless steel
- Design: cylindrical storage vessel with feet/consoles

Tank dimensions:
- Length approx. 15,750 mm
- Diameter approx. 2,900 mm
- Weight approx. 16,500 kg
- Above-ground installation

Top offer: Liquid fertilizer – AHL tank systems available from 5,000 to 100,000 liters. Water tanks and firewater storage tanks available as well.

You are welcome to customize your tank setup according to your requirements!

All our systems are thoroughly inspected and tested by selected, qualified staff at our company.
Hnodpfec Nk Evjx Ac Njk
We also offer cost-effective delivery upon request.

On-site inspection of our tanks is possible at any time. Additional above-ground and underground storage tanks in various sizes are available for immediate sale on our premises.

Have we convinced you with our offer?
If you have any questions or specific requests, please feel free to call us. One of our experienced staff will be happy to assist you.

Pricing/Shipping
The price for the tank is ex works Warstein, loaded and ready for collection. Affordable delivery can be offered at an additional charge. Delivery time: immediately.

You will receive an invoice with VAT shown separately.

In addition, we purchase existing tank systems and, as a certified specialist company according to the German Water Resources Act (WHG), we can professionally empty, clean, dismantle, and remove them.

Best regards from Warstein

Tank- und Umweltschutz Wozniack
Enkerbruch 2
59581 Warstein

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.

Tiekėjas

Paskutinį kartą prisijungęs: praėjusią savaitę

Registruotas nuo: 2015

36 Skelbimai internetu

Skambinti

Siųsti užklausą

Telefonas & Faksas

+49 2902 ... skelbimai

Faksas:

Šie skelbimai taip pat gali jus sudominti.

Aukcionas

Lazerio pjovimo staklės TRUMPF Trumatic L 3050

Baden-Württemberg

1 240 km

Lazerio pjovimo staklės
TRUMPFTrumatic L 3050

3 000 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2006, veikimo valandos: 24 314 h, mašinos/transporto priemonės numeris: A0230A1231, lazerio galia: 6 000 W, maks. lakšto storis: 25 mm, X ašies eiga: 3 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 100 mm, No minimum price – guaranteed sale to the highest bidder! Bidding requires timely collection of the machine by 30.04.2026! Increased need for sale – therefore shortened runtime and reduced minimum price! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 100 mm Laser power: 6,000 W Laser unit: CO2 laser TLF 5000, high-frequency excited Maximum workpiece weight: 900 kg Positioning speed (X/Y): 200 m/min Hjdpfx Aeyynu Noc Nsnk Positioning speed simultaneous (X+Y): 300 m/min Maximum sheet thickness steel: 25 mm Maximum sheet thickness stainless steel: 25 mm Sheet thickness aluminium: 15 mm MACHINE DETAILS Power-on hours: 55,176 h Cutting hours: 24,314 h Control model: Siemens Sinumerik 840D Control equipment: Open PC-based control system Online help Diagnostic functions Maintenance logbook Technology data Remote maintenance Safety equipment: Multi-beam light curtains and protective enclosure Fully enclosed beam guidance with nitrogen purging Monitoring system Multi-chamber extraction and compact dust collector Paintwork: white RAL 9002 / gentian blue RAL 5010 Drives: Gantry drive combined with linear direct drives OTHER EQUIPMENT Cooling unit Logbook function Automatic pallet changer Laser power control HI-LAS high-pressure cutting PMS plasma sensor technology Programmable power cycles Programmable cutting gas pressure control Laser cutting head with 5" lens and 7.5" lens Quick-change system for cutting heads Automatic sheet edge detection APC capacitive height control and process monitoring PCS (Process Control System) Laser diode positioning Automatic focus adjustment (AutoLas Plus) Spray device for safe thick-sheet processing Automatic shutdown Work area illumination Encapsulated machine frame with integrated laser unit

Peržiūrėti detales

Mažas skelbimas

180.000l nerūdijančio plieno rezervuaras Perfect for granulate and loose products

Wtelno

444 km

180.000l nerūdijančio plieno rezervuaras
Perfect for granulate and loose products

35 000 €

VB PVM negalimas išskirti

Skambinti

Aukcionas

Lazerio pjovimo staklės TRUMPF TruLaser 5060

Baden-Württemberg

1 240 km

Lazerio pjovimo staklės
TRUMPFTruLaser 5060

10 000 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2008, veikimo valandos: 42 130 h, mašinos/transporto priemonės numeris: A0270 A2021, lazerio galia: 6 000 W, plieno lakšto storis (maks.): 25 mm, aliuminio lakšto storis (maks.): 15 mm, X ašies eiga: 6 000 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 115 mm, Placing a bid obligates the buyer to collect the machine on time by 30.04.2026! Increased pressure to sell – thus shorter sale duration and reduced minimum price! TECHNICAL DETAILS Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 115 mm Workpiece weight: 2,800 kg Speed parallel/simultaneous: 200 / 300 m/min Accuracy Smallest increment: 0.001 mm Positioning deviation: ± 0.1 mm Position repeatability: ± 0.03 mm Laser Model: TruFlow 6000 Power: 300 – 6,000 W Wavelength: 10.6 µm Beam mode: TEM01 Pulse frequency: 0.01 – 10 kHz Gases: CO2 / N2 / He Sheet thickness mild steel: 25 mm Sheet thickness stainless steel: 30 mm Sheet thickness aluminium: 15 mm MACHINE DETAILS Control unit: Siemens Sinumerik 840 D Dimensions & Weight Dimensions (L x W x H): 16.95 x 5.55 x 2.55 m Weight: 16 t Power consumption: 43 – 89 kW Connected load: 109 kVA Operating hours Beam-on time: 21,660 h Laser-on time: 42,130 h Compressed air connection: 7 – 10 bar Nitrogen connection: 30 bar Oxygen connection: 20 bar EQUIPMENT Cooling unit, logbook function Automatic pallet changer Gantry drive combined with linear direct drives Laser power control HI-LAS high-pressure cutting PMS plasma sensor system Programmable power cycles Hnedpoyynuiofx Ac Nek Programmable cutting gas pressure regulation Laser cutting head with 5" lens and 7.5" lens Quick-change system for cutting heads Automatic sheet edge detection APC capacitive height control and process monitoring PCS (process control system) Laser diode positioning Automatic focus adjustment (AutoLas Plus) Spray unit for safe processing of thick sheets Automatic switch-off Work area lighting Open, PC-based control system Online assistance Diagnostic functions Maintenance logbook Technology data Remote maintenance Safety Multi-beam light barriers Fully enclosed beam guide with nitrogen purging Monitoring system Multi-chamber extraction and compact dust collector Protective enclosure Machine system software

Peržiūrėti detales

Aukcionas

CNC tekinimo staklės GILDEMEISTER NEF CT 40

Nordrhein-Westfalen

1 103 km

CNC tekinimo staklės
GILDEMEISTERNEF CT 40

4 550 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 08500, sukimosi skersmuo virš skersinio stumduko: 225 mm, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 400 mm, veleno greitis (maks.): 4 000 aps./min, valdiklio modelis: EPL 2, TECHNICAL DETAILS Max. turning diameter: 400 mm Turning length: 1,000 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 225 mm Travel X-axis: 260 mm Travel Z-axis: 1,040 mm Main spindle Speed range: 20 - 4,000 rpm Drive power: 11 kW Max. torque: 75 Nm Spindle bore: 72 mm Chuck diameter: 185 mm Spindle nose: 140H5 Spindle bearing diameter (front): 100 mm Tool turret Number of tool stations: 12 positions Tailstock Quill diameter: 80 mm Quill stroke: 100 mm Tailstock taper: MT 4 Max. quill pressure: 8,000 N Feeds Rapid traverse (X-/Z-axis): 10 m/min Feed rate (X-/Z-axis): 5 m/min Feed force (X-axis): 5,000 N Feed force (Z-axis): 8,000 N MACHINE DETAILS Control model: EPL 2 Operating voltage: 380 V Hodpfeyxm Tnex Ac Nenk Frequency: 50 Hz Operating current: 76 A Total power requirement: 29 kW Dimensions & Weight Space requirement approx.: 4.6 x 2.1 x 2.0 m Machine weight approx.: 4.0 t EQUIPMENT Chip conveyor Three-jaw chuck Documentation

Peržiūrėti detales

Mažas skelbimas

Dujomis kūrenama važiuojamoji kamerinė krosnelė VEI VEI-GB-KO

Dortmund

1 162 km

Dujomis kūrenama važiuojamoji kamerinė krosnelė
VEIVEI-GB-KO

Skambinti

Aukcionas

Horizontalus apdirbimo centras MORI SEIKI SH 400

Nordrhein-Westfalen

1 103 km

Horizontalus apdirbimo centras
MORI SEIKISH 400

5 000 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 669, X ašies eiga: 560 mm, Y ašies eiga: 510 mm, Z ašies eigos atstumas: 510 mm, valdiklio modelis: MSC 502, sukimosi greitis (maks.): 12 000 aps./min, TECHNICAL DETAILS Travel X-Axis: 560 mm Travel Y-Axis: 510 mm Travel Z-Axis: 510 mm Distance spindle center to table: 50 - 650 mm Distance spindle nose to table center: 100 - 610 mm Main Spindle Maximum speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet Changer Number of pallets: 2 Pallet size: 400 x 400 mm Maximum workpiece diameter: 580 mm Maximum workpiece height: 650 mm B-Axis Indexing time 90°: 2.5 sec Pallet change time: 6.0 sec Tool Changer Number of tool stations: 60 pos. Maximum tool diameter: 80 mm Maximum tool diameter with free adjacent pocket: 125 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip change time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 - 24,000 mm/min Fine feed rate: 0 - 1,260 mm/min MACHINE DETAILS Control system: MSC 502 Total power requirement: 63 kVA Hnsdpfx Acsyxm Ire Njk Dimensions & Weight Space requirement approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Cooling unit High-pressure cooling Internal coolant supply Tool magazine: 60 pos. Pallet changer Pallets: 2 Signal lamp B-axis Hydraulic unit Spindle oil cooler Note: The shaft for loading must be provided by the buyer.

Peržiūrėti detales

Aukcionas

CNC tekinimo ir frezavimo centras OKUMA MacTurn 50

Nordrhein-Westfalen

1 103 km

CNC tekinimo ir frezavimo centras
OKUMAMacTurn 50

11 500 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, veikimo valandos: 21 269 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0082, tekėjimo ilgis: 1 500 mm, tekėjimo skersmuo: 580 mm, X ašies eiga: 598 mm, Y ašies eiga: 230 mm, Z ašies eigos atstumas: 1 660 mm, TECHNICAL DETAILS Travel path X-axis: 598 mm Travel path Y-axis: 230 mm Travel path Z-axis: 1,660 mm Maximum turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main spindle Main spindle speed range: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Drive power – main spindle: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed rate: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-tool / 1x M-tool) positions Driven stations: stepless Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar shank diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Maximum tool diameter: 170 mm Maximum tool length: 350 mm Maximum tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total connected load: 53 kVA Dimensions & Weight Space requirement: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant unit High-pressure cooling 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Various tool holders (44 pcs) Hodpfx Aceyxmyus Nsnk Three-jaw chuck Schunk – ROTA NC 400-120 Electronic handwheel

Peržiūrėti detales

Mažas skelbimas

Juostinis pjūklas - horizontalus BERG & SCHMID K-tech DG 62/45 HA-I

Vokietija

999 km

Juostinis pjūklas - horizontalus
BERG & SCHMIDK-tech DG 62/45 HA-I

Skambinti

Būklė: naujas, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation due to inclined cutting, feed rate and cutting pressure control • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning) • Energy-efficient and low-vibration operation through inclined cutting • Ergonomic, safe, and freestanding control panel • Frequency-controlled saw drive 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-diameter flywheels (520 mm) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to start of material or cut immediately for serial cuts Hnjdpfx Aed Iipmjc Nek 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Peržiūrėti detales

Aukcionas

CNC tekinimo staklės GILDEMEISTER CTX 500

Nordrhein-Westfalen

1 103 km

CNC tekinimo staklės
GILDEMEISTERCTX 500

6 000 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 315357, sukimosi skersmuo virš skersinio stumduko: 420 mm, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 600 mm, veleno greitis (maks.): 3 200 aps./min, valdiklio modelis: Eltropilot Heidenhain, TECHNICAL DETAILS Turning length: 1,000 mm Swing diameter over bed cover: 600 mm Swing diameter over flat guide: 420 mm Travel distance X-axis: 275 mm Travel distance Z-axis: 1,065 mm Main spindle Speed range: 16 - 3,200 rpm Drive power: 27 kW Max. torque: 800 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 85 mm Chuck diameter: 260 mm Spindle nose: 220H5 Tool turret Number of tool stations: 12 Tool shank diameter: 40 mm Turret indexing time: 0.8 s Hnsdpeyxmurjfx Ac Njk Tailstock Quill diameter: 100 mm Quill stroke: 120 mm Tailstock taper: MK 5 Max. quill pressure: 9,500 N Feeds Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 15 m/min Feed force X-direction: 5,000 N Feed force Z-direction: 1,000 N MACHINE DETAILS Control unit model: Eltropilot Heidenhain Operating voltage: 400 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 52 kVA Dimensions & Weight Space requirement: approx. 5.5 x 2.5 x 2.1 m Machine weight: approx. 7.5 t EQUIPMENT Documentation Chip conveyor Coolant system Tailstock Hydraulic unit Three-jaw chuck (model: SMW KNCS-N-260-72) Note: An RMS sensor is installed in the machine!

Peržiūrėti detales

Aukcionas

Nordrhein-Westfalen

1 103 km

Daugiaašė mašina
SCHÜTTESG 18

16 000 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 8 000 aps./min, tekėjimo skersmuo: 18 mm, valdiklių gamintojas: Siemens, Įranga: drožlių transporteris, strypų padavėjas, TECHNINĖS DETALĖS Sukimosi skersmuo: 18 mm (16 mm) Veleno apsisukimų dažnis: 800 - 8.000 aps./min Hnsdpfxoyxmrqs Ac Nsk Veleno skritulio skersmuo: 180 mm Pagrindinio veleno pavaros galia: 11 kW Sukimo momentas: 18 Nm Strypų padavimas: maks. 80 mm Išilginis slidinėjimo eiga: 50 mm (63 mm) Skersinio slidinėjimo eiga: 20 mm (32 mm) ĮRENGINIO DETALĖS Valdymas: Siemens Matmenys ir svoris Užimamas plotas apytiksliai: 6,0 x 1,5 x 2,2 m Įrenginio svoris apytiksliai: 5,5 t ĮRANGA CO2 gesinimo įrenginys Kraft&Bauer Ruez grandininis transporteris IEMCA strypų padavėjas PRA 52 42 F Įrankių rinkinys Kreivių rinkinys Įvairūs spaustuvai Dokumentacija Skiedrų transporteris Aušinimo skysčio sistema Detalių išleidimo sistema Signalinė lempa Sąsaja strypų padavėjui Hidraulinis blokas

Peržiūrėti detales

Mažas skelbimas

100 000 litrų / 100 m³ gesinimo vandens rezervuaras BARTH

Forst

1 237 km

100 000 litrų / 100 m³ gesinimo vandens rezervuaras
BARTH

Skambinti

Aukcionas

Vertikalus apdirbimo centras MAZAK Variaxis 200

Nordrhein-Westfalen

1 103 km

Vertikalus apdirbimo centras
MAZAKVariaxis 200

12 500 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 510 mm, Y ašies eiga: 510 mm, Z ašies eigos atstumas: 460 mm, valdiklio modelis: Mazatrol Fusion 640M, veleno greitis (maks.): 12 000 aps./min, TECHNICAL DETAILS Travel X-axis: 510 mm Travel Y-axis: 510 mm Travel Z-axis: 460 mm Swivel range A-axis: +30° / -120° Rotation range C-axis: +/- 360° Feed rate range (X-/ Y-/ Z-axis): 1 - 50,000 mm/min Rapid traverse (X-/ Y-/ Z-axis): 50 m/min Indexing A and C: 0.001° Switchover time 90° A/C: 1.9 / 1.5 s Main spindle Max. spindle speed: 12,000 rpm Main spindle drive power: 22/15 kW Tool holder: ISO 40 Spindle diameter: 80 mm Acceleration time to max. speed: 1.7 s Worktable Clamping area: 500 x 400 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 80 mm Hjdpfx Asyxmq Tsc Nenk Spindle-to-table distance: 190 - 650 mm Max. workpiece size: 500 x 500 x 405 mm Max. table load: 300 kg Tool changer Max. number of tool stations: 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent station: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time: 4.5 s MACHINE DETAILS CNC control: Mazatrol Fusion 640M Total power requirement: 51 kVA Dimensions & Weight Space requirements: 3.4 x 3.7 x 2.8 m Machine weight: 7.5 t EQUIPMENT Hydraulic unit Coolant system Chip pan Tool measurement Documentation

Peržiūrėti detales

Aukcionas

CNC tekinimo ir frezavimo centras SPINNER TD 42 Triplex

Nordrhein-Westfalen

1 103 km

CNC tekinimo ir frezavimo centras
SPINNERTD 42 Triplex

18 000 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 7 000 aps./min, veleno skylė: 42 mm, valdiklio modelis: Siemens 840 D - SL, priešpriešinio veleno didžiausias greitis: 7 000 aps./min, Įranga: drožlių transporteris, TECHNICAL DETAILS Bar diameter: 42 mm Travel X-axis 1/2/3: 180 mm Travel Y-axis 1/3: ±45 mm Travel Z-axis 1/2/3: 704 / 620 / 704 mm Main spindle Speed: 7,000 rpm Drive power: 22 kW / 16.5 kW Torque at spindle: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Sub spindle Speed: 7,000 rpm Drive power: 19 kW / 16.5 kW Torque at spindle: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Tool turret Number of turrets: 2 + 1 pos Number of tool stations: 3x 12 pos Number of driven tool stations: 3x 12 pos Driven tool speed: 8,000 rpm Power: 11.4 kW / 2.3 kW Torque: 26 Nm / 14 Nm Tool holder: VDI 25 Rapid traverse (X / Y / Z): 30 m/min Acceleration: 0.5 g MACHINE DETAILS Control: Siemens 840 D - SL Total power requirement: 60 kW Dimensions & Weight Footprint: approx. 8.2 x 3.3 x 2.5 m Machine weight: approx. 7.5 t EQUIPMENT Documentation Chip conveyor Knoll High-pressure coolant (14 bar) Parts catcher Sub spindle Interface for bar feeder Bar loading magazine Spinner Barload BL 0146 C-axis: 2x 0.001° Hydraulic unit Hainbuch collet chuck Hnjdpfxjyxmnxo Ac Nsk Y-axis: 2x ±45 mm Various tool holders Various collets Tool setting arm

Peržiūrėti detales

Mažas skelbimas

Agios Athanasios

1 569 km

Hidraulinis presas
MECAMAQPOV 350

Skambinti

Aukcionas

CNC tekinimo staklės HWACHEON Cutex 160 B

Nordrhein-Westfalen

1 103 km

CNC tekinimo staklės
HWACHEONCutex 160 B

11 000 €

Aukcione

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2013, veikimo valandos: 7 546 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 284 mm, tekėjimo skersmuo: 300 mm, veleno skylė: 62 mm, veleno greitis (maks.): 4 500 aps./min, valdiklio modelis: Fanuc Oi-TD, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. turning length: 284 mm Swing diameter over bed: 550 mm Hjdpeyxmmuefx Ac Nonk Chuck diameter: 210 mm Bar capacity: 51 mm Spindle nose: A2-6 Max. main spindle speed: 4,500 rpm Spindle bore: 62 mm Spindle bearing diameter: 100 mm Main spindle drive power: 11 / 7.5 kW Travel - X-axis: 170 mm Travel - Z-axis: 335 mm Number of tool stations: 12 pos. Tool size: Ø25 x Ø40 mm Rapid traverse (X / Z): 36 / 36 m/min Tailstock quill diameter: 60 mm Tailstock quill stroke: 80 mm Tailstock taper: MT 4 MACHINE DETAILS Control: Fanuc Oi-TD Total connected load: 25 kVA Dimensions & Weight Required floor space approx.: 8.5 x 2.5 x 2.0 m Machine weight approx.: 3.2 t Operating hours Control on-time: approx. 26,932 h Machining time: approx. 7,546 h EQUIPMENT Documentation Chip conveyor Coolant system Tailstock Parts catcher Signal lamp Hydraulic unit SEOAM CAH-08 3-jaw chuck HAINBUCH nova size 65 collet chuck Tool measurement Interface for bar feeder Breuning SIMAG 70.1-3000 bar loading magazine Various tool holders

Peržiūrėti detales

Reklamuokite čia