Pašildymas dujomis kūrenamas krosnis

VEI-Engineering VEI_KO_V_GB_400-350

Būklė: naudotas, CNC Oxy-Fuel Cutting System BACH Type ACW 2500 Oxy-Fuel Cutting Machine with CNC Controller NBS 400 Machine No. 14 561-06 Year of Manufacture: 2006 Gedpfjf Ncadox Acyjip Cutting Area: 2500 x 6500 mm Track Length: 8000 mm Track Gauge: 3345 mm Track Height: 650 mm 2x Machine Cutting Torches with Burn Table

Būklė: geras (naudotas), Gamybos metai: 2011, mašinos/transporto priemonės numeris: MS 1153, Technical data (approx.): - Passage to blasting chamber: W 370 x H 170 mm - Blasting nozzle - Door opening to blasting chamber - Blast media pressure vessel - Blast media recovery - Separate control panel - Space requirement blasting unit: 1600 x 2000 x H 1750 mm - Space requirement blast media container: 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume: 700 - 1500 m³/h - Suction fan: 3 kW - Space requirement filter unit: 1600 x 1600 x H 3250 mm - Motor-driven infeed roller conveyor: 4 m - Non-driven roller conveyor: 3 m Giedsllvr Dspfx Acyep - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm

Gamybos metai: 2018, būklė: labai geros būklės (naudotas),

Būklė: naudotas, Gamybos metai: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-maintained Condition For sale is a Lindner Urraco 95 DK from the year 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained, ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and a reinforced cutting frame. — Equipment / Scope of Delivery Gjdox Nkhqjpfx Acyeip • 1 set of armoured shafts HW 8/10 with comb scrapers and secondary breaking bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with comb scrapers and secondary breaking bar, also for scrap and waste • DK4 equipment with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 HP) Emissions standard: Stage V / Tier 4f (depending on configuration) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: Crawler tracks, hydraulically driven Applications: Scrap, commercial waste, bulky waste, mixed waste, wood, recycling material — Condition: • Well-maintained machine • Fully operational, technically sound • Sale as inspected on site Additional information / Maintenance history The machine was under a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally according to the manufacturer’s specifications and is fully documented. Notes: • Sale is conducted without any guarantee or warranty. • No returns or renegotiations. • Sale subject to prior sale. All information is provided without obligation. The seller accepts no liability for errors, incompleteness, or changes to the information. Sale is exclusively subject to prior sale.

Būklė: geras (naudotas), System: REWA chamber filter press, used Type: 470-15-25K-HP Design: side bar guided Gisdpfxoqakbro Acyjp Filter plate size: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available to suit the medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (product-contacting parts): flange, tie rods stainless steel, PP or rubber-coated Material (non-product-contacting parts): stainless steel Purchase or rental: Plant inspections by appointment at our facility. Other: We supply the system used, functional or refurbished, adapted to your requirements. Would you like to rent or buy this system? Please contact us, we are happy to assist you.

Būklė: naujas, Cutting range at 90°: round 510 mm Cutting range at 90°: square 450 mm Cutting range at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Bandsaw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight approx. 2.1 t Space requirement approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I - 2-column miter saw - Robust, yet easy to operate - Material height sensor (automatic cut start detection) - Smooth operation thanks to angled cutting, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration due to angled cutting - Ergonomic, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min. - Hydraulic cutting pressure control valve - Hydraulic control of saw frame and vice Gijdod Iipmspfx Acyop - LEDs for monitoring all safety functions - Large-dimensioned flywheels (520 mm) each - Clear miter adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material start or direct cutting for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vice opens

Būklė: geras (naudotas), Kabinen-Hängebahnschleudermaschine 250 kg TOSCA TS-250 Typ: Hängebahn (Hook Type) Maximaler Werkstückdurchmesser: 1000 mm Maximale Werkstückhöhe: 1500 mm Maximales Werkstückgewicht: 500 kg Öffnungsbreite der Maschine: mm Anzahl Turbinen: 2 Turbinen-Typ: 360 Turbinenraddurchmesser: 360 mm Turbinenleistung: 7,5 kW Max. Turbinenförderleistung: 105 kg/min Typ des Transportgleises: Y Reinigungssystem: Luftseparator (Airwash) Godpfjvpgq Nox Acyjip Fundament erforderlich: Nein Gehäuseschutz: Mangan + Gummi Erforderlicher Luftdurchsatz: 3.000 m3/h Max. installierte Leistung: ca. 19 kW Gesamtgewicht der Maschine: 0 kg Gesamtbreite der Maschine: mm Gesamthöhe der Maschine: mm Gesamtlänge der Maschine: mm Die Maschine wird derzeit einer Komplettüberholung unterzogen. Sämtliche beschädigten Komponenten werden durch neue ersetzt, Turbinen werden vollständig überholt, Neulackierung in RAL 7037/2000. Die Auslieferung erfolgt im Zustand WIE NEU. !!! WIE NEU ZUSTAND !!!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 400 mm, pjovimo plotis (maks.): 400 mm, bendras aukštis: 1 720 mm, bendras ilgis: 2 600 mm, bendras plotis: 2 400 mm, bendras svoris: 2 200 kg, stalo aukštis: 700 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 400 mm, padavimo ilgis X ašis: 600 mm, juostinio pjūklo ilgas: 5 700 mm, pjūklo juostos plotis: 41 mm, Fully hydraulic high-performance band saw in heavy-duty construction, featuring a horizontally parallel moving saw blade, designed for cutting profiles, pipes, and solid materials of all qualities, including extremely difficult-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide saw bands. Saw unit made from solid polymer concrete, delivering maximum running smoothness and blade service life. The saw unit is guided by two vertical square columns (double-column guide) with hardened and ground guiding rails. Mechanical saw blade tensioning with pre-tensioned carbide blade guides. Material clamping is accomplished via two horizontal frame clamping vices. Material feed is provided by a non-driven roller conveyor with twelve rollers, integrated into the machine, allowing easy transport of short remnants. Year of manufacture: 2008 Cutting capacity round: 400 mm Cutting capacity square: 400 x 400 mm Gijdpfx Aceupvrxeysp Automatic feed length: 600 mm Multiple material feed: 99,999 mm Cutting speed stepless: 20–130 m/min Total drive power: 7 kW Saw motor power: 4 kW Clamping pressure reduction: stepless adjustable Material support height: 700 mm Saw band dimensions: 5090 x 41 x 1.3 mm Shortest cut length in automatic operation: 6 mm Remnant length in automatic operation: 80 mm Voltage: 380V / 50 Hz Dimensions (LxWxH): 2600 x 2400 x 1720 mm Weight: 2,200 kg Coolant system Full enclosure CNC control Idle monitoring Side guide rollers Height measurement system Light barrier

Būklė: naujas, Šachtinė krosnis, gamintojas VEI Gijdpfx Aceg R Snheysp Tipas: SCO_EB Vidinis aukštis: 1200 mm Vidinis skersmuo: 1400 mm Išorinis skersmuo: 2200 mm Išorinis aukštis (be dangčio): 1650 mm Išorinis aukštis (su dangčiu): 2600 mm Elektrinis šildymas: 64,5 kW Cirkuliacinis ventiliatorius: 5,5 kW Trifazis prijungimas: 400 V, 50 Hz Temperatūra: maks. 750°C

Būklė: beveik kaip naujas (naudotas), Gleason 104 Coniflex tiesių kūginių krumpliaračių pjovimo staklės Specifikacijos Gamintojas: GLEASON Modelis: 104 Būklė: Naudota Serijos numeris: 631406 Sandėlio numeris: DCN1749 Maks. skersmuo: 432 mm Modulis: 8,5 Giedpjxtpk Aefx Acyep Min./maks. kūgio atstumas: 0-305 mm Aprašymas Komplektacija: - Atsarginiai krumpliaračiai - Naudojimo instrukcija