Kellenberg pirkti naudotą (109)

Sąlyga: labai geros būklės (naudotas), with internal grinding device Centre height 125 mm Centre width 600 mm Grinding wheel 400 x 40 x 127 mm Various accessories Nwodpfx Aeiu E Trof Nsb MARCELS MASCHINEN AG

Sąlyga: visiškai atnaujintas (naudotas), Machine fully overhauled With digital display Centre height: 175 mm Centre distance: 1000 mm Grinding wheel: 400 x 50 x 127 mm + 225 x 20 x 76.2 mm Grinding wheel speed: 1,500–2,200 rpm Nwedpfxjwhk Uuo Af Nsb With internal grinding device Various accessories MARCELS MASCHINEN AG

Sąlyga: paruoštas naudoti (naudotas), An older precision cylindrical grinding machine from Kellenberger, including accessories, is available. Centre distance: 200 mm, centre height: 125 mm, maximum workpiece weight: 3 kg, maximum workpiece diameter: 245 mm, maximum workpiece length: 130 mm. An on-site inspection is possible. Nwsdpfew Edpgex Af Neb

Gamybos metai: 2008, Sąlyga: naudotas, Packing machine for 10-bottle and 6-bottle cartons for 330 ml non-returnable bottles, including date marking via Videojet printer, year of manufacture 2016. Machine (additional): Full carton packing machine Voltage: 400 V Compressed air: 6 bar Length: 5.4 m Width: 1.15 m Height: 1.95 m Base construction: on legs Equipment: Inkjet date coder year of manufacture 2016, hot melt adhesive unit Weight: 700 kg Nwsdpfx Afsvcqn Eo Nob

Sąlyga: naudotas, TECHNICAL DATA - Distance between centers: 1000 mm - Center height: 175 mm Nwedoxy S A Ispfx Af Nsb - Table orientation: 9° - Universal wheelhead spindle stock - Left grinding wheel dimensions: 400 x 50 x 127 mm - Motor power: 3 kW - Spindle speed: 1500 / 1700 / 2200 rpm - Wheelhead spindle orientation: 270° (3 x 90°) - Internal spindle bore: 90 mm - Workpiece spindle stock orientation: 180° - Spindle speed: 20 - 400 rpm - Internal spindle taper: Morse 5 - Motor power: 0.9 kW - Tailstock internal taper: Morse 4 - Tailstock quill stroke: 30 mm - Dimensions: 2860 x 1680 x 1670 mm - Machine weight: 2500 kg ACCESSORIES - Automatic cycle (roughing, finishing, and return) - Counter-center - Coolant tank with paper filter - 1 internal grinding spindle - 1 diamond holder - 2 two-finger steady rests - 1 three-finger steady rest - 1 set of drivers - Various grinding wheel holders

Gamybos metai: 1979, Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, TECHNICAL DETAILS Centre height: 125 mm, plus heights of 50 mm Distance between centres: 1,000 mm Grinding wheel: • Diameter: 400 mm • Width: 50 mm • Bore: 127.0 mm Swivel angle: 270° Workpiece spindle head speed: 20 - 400 rpm Spindle taper: 5 MT Tailstock taper: 3 MT Table swivel angle: 8° Table feed rate: stepless up to 6.0 m/min Internal grinding spindle with 60,000 rpm External grinding wheel motor: 4.0 kW Workpiece spindle motor: 1.5 kW Machine weight: 3,100 kg Overall machine dimensions: 2,860 × 1,680 × 1,670 mm (L × W × H) EQUIPMENT & SCOPE OF DELIVERY • Machine fully retrofitted • New control cabinet & new wiring diagram • New motor & frequency inverter for workhead • 2-axis DRO • Coolant tank with paper filtration Nwjdpfxjk H Hp Nj Af Nob • Geometry manufactured according to Kellenberger protocol • Internal grinding spindle • Extensive accessories Please refer to the attached inspection report for further machine details.

Sąlyga: visiškai atnaujintas (naudotas), Kellenberger vidinių ir išorinių detalių universalioji apvali šlifavimo staklė Kellenberger 1500 U - 175 (įskaitant vidinį šlifavimo įrenginį) Atstumas tarp centrų: 1500 mm - Centro aukštis: 175 mm Siemens servovariklis. Dažnio keitikliai viduje ir išorėje, WSS Parduodama su įvairia papildoma įranga. Nodpfx Aowqlykof Nowb Prieinama iš karto! 1000U variantas: restauravimo procese

Sąlyga: naudotas, Gamybos metai: 2003, Grinding diameter: 450 mm Grinding length: 1500 mm Center height: 225 mm Photos show a nearly identical machine with 1000 mm capacity Also geometrically overhauled and partially repainted. Included accessories: - 1x Grinding wheel setup LEFT 500x80x203.2 mm - 1x Grinding wheel setup RIGHT 400x63x127 mm - 1x Internal grinding device Ø120 mm for 2 HF spindles (motor spindle and HF spindle) Center height: 225 mm Grinding head motor: drive power 9.2 kW B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35 m/s or 45 m/s, speed of grinding spindle adjustable via CNC control (standard) Semi-automatic balancing device, ELASO, type EB 500 MFV 1230: high-frequency internal grinding spindle with oil-air lubrication High-performance motor spindle M34-FAVY100.R620-20/4 with permanent grease lubrication Balancing arbor Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock Micro adjustment on the tailstock Pneumatic relief for the tailstock Tailstock park position Standard workpiece headstock MK5 CNC-controlled C-axis for standard workpiece headstock Sine bar for direct angle measurement using gauge blocks Wide adjustment, swivel-type base for the standard workpiece headstock Nwsdpexflcrjfx Af Njb Reinforced workpiece headstock MK5 CNC-controlled C-axis for reinforced workpiece headstock Fixed base for the reinforced workpiece headstock Coolant supply through the workpiece spindle Dressing device on lower table – with 2x 0053.05 and 2x 0053.20, located behind the workpiece headstock and tailstock Dressing device on upper table – with pos. 1x 0053.01, 1x 0053.03, 1x 0053.13 Preparation for later connection of the HF dressing unit for rotary dressing tools (RENAUD) Adapter plate for universal use of the HF dressing unit, internal and external KELPOS: active longitudinal positioning MOVOMATIC GAP: infeed sensor MOVOMATIC KELSET: tool measuring system KELSET, MARPOSS 1900 liters: endless belt filter with lift station, 100 l/min at 2.0 bar, designed for 2 machines Full enclosure Enclosure with service doors left and right Electrical interlock for the side door (grinding wheel change) Preparation for customer-side connection of a grinding mist extraction unit Chiller for cooling the H2O circuit (grinding head and HF spindle) Control cabinet lighting with door switch Data according to delivery note. All specifications subject to change without notice.

Sąlyga: naudotas, Grinding diameter 350 mm Grinding length 1000 mm Center height 175 mm Space requirement approx. 3.6/3.5 m As the world’s leading company in Kellenberger overhauls/retrofits, we are not only able to deliver machines in as-new quality with warranty, but can also offer ongoing service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New, state-of-the-art CNC cylindrical grinding machine control featuring the BEMA grinding interface - Completely rebuilt control cabinet - New drive technology - Replacement of all electrical cabling, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B axis) Standard Equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper, optionally with fine adjustment - Grinding spindle headstocks T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - B axis high-resolution - Marposs measuring system for grinding wheel measurement - Longitudinal positioning with Marposs - GAP control (sensor on grinding spindle headstock), ELASO integrated into control interface Nedpfxeuwv H To Af Nswb - Semi-automatic balancing by ELASO integrated into control interface - BEMAT grinding wheel measurement Options at Extra Cost: - HF internal grinding spindle - High-precision, maximum rigidity workpiece spindle headstock - Measuring control - Extraction unit - Paper band filter Control Functions: Basic Grinding Cycles - Zeroing the workpiece with Z-pos (longitudinal positioning) - Grinding wheel measurement with BEMAT - Touch sensor GAP - Measuring dressing diamonds - Corrections - External and internal cylindrical grinding (oscillation and plunge grinding) - External and internal taper grinding (B-axis swiveling, dressing with straight wheel) - External and internal radius grinding (radius dressed onto wheel) Optional Grinding Cycles - External and internal profile plunge grinding with profile wheel - External and internal profile grinding with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angle - Trapezoidal thread grinding - Out-of-round grinding external and internal 15,000

Sąlyga: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. New servo motors in the X-axis and for the workpiece headstock. Nsdpfx Afouwv Ido Nowb Photo shows a previously delivered machine in original equipment. - Operation via the touch panel is extremely user-friendly. - The symbols on the control panel are virtually identical to the original control system, so no retraining is required. - Diagnostic function with display of PLC messages and digital I/O. - Dressing function can be expanded or modified according to customer requirements. - Option for spindle orientation of the workpiece spindle upon request. - New maximum infeed amount: 40 mm (can be further increased on request). - Digital readout in 2 axes. Resolution on X-axis: 0.5 µm Options: - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding spindle stock (no height adjustment possible with spindle) - New, robust internal grinding attachment with 80 mm or 100 mm diameter, including height adjustment - Increase of centre height to maximum 225 mm - Speed control for the grinding spindle Includes: - Operating tools - Draw tube for chuck Additional accessories available on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external cylindrical and internal grinding, or for external, face and internal grinding of single workpieces in one setup. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control At present, the machine does not comply with the essential safety and protection requirements according to BetrSichV 2015 (German Occupational Health & Safety Regulation for the use of work equipment). Raising the required minimum protection level must be assessed by conducting a risk assessment according to BetrSichV.

Sąlyga: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. Nsdpfsuxft Ejx Af Nswb The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workpiece headstock swivelling: 360° Grinding spindle head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±6° Longitudinal table travel: 1750 mm Njdpfxsd Ih Dvo Af Nswb Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight, cantilevered: 130 kg including clamping Internal spindle mount: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Required floor space approx.: 5.6 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver the machines in as-new quality with warranty, but can also offer you comprehensive service for your machines. Geometrically overhauled and freshly painted with original electrics, but with new WSS drive and controller in three-phase technology. Optionally available with splash guard doors and X-axis enclosure. - 2-axis digital readout. X-axis resolution 0.5 μm Available options at extra charge: - Swivel angle display for upper table - Rotary encoder with digital readout in the workpiece headstock - Rotary encoder with digital readout in the grinding spindle headstock (spindle height adjustment not possible) - New robust internal grinding attachment, 80 mm or 100 mm diameter, with height adjustment - Increase of centre height up to max. 225 mm Included: - Operating tools - Clamping tube for chuck Further accessories on request. At present, the machine tool does not meet the essential health and safety requirements as specified in the German Industrial Safety Ordinance (BetrSichV 2015). The required minimum safety objectives must be determined by means of a risk assessment according to BetrSichV.

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ± 6° Nwsded Ih Dwopfx Af Neb Table longitudinal travel: 1750 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (overhung): 130 kg including clamping device Internal spindle mounting: 80 mm Total connected load: 6.5 kW Machine weight: approx. 2.9 t Space requirement: approx. 5.6 x 2.0 m Geometrically overhauled and newly painted. Photos show identical 1000mm model. Included: - New control cabinet - Modern workpiece headstock from Advance model - New workpiece spindle drive - Modern hydraulic unit - Lift-off function for grinding headstock - Modern internal grinding attachment - Operating tools Extension: Table swiveling increased to 10° Optional: - Swivel angle indicator for upper table - Swivel angle indicator for workpiece headstock - Swivel angle indicator for grinding headstock - Splash guard door for Z-axis - Splash guard enclosure for X-axis etc. ADDITIONAL SERVICES: - Machine servicing - Grinding technology consulting - Operator training - Spare parts - Accessories

Sąlyga: naudotas, Internal diameter: 340/440 mm Grinding depth: 99,999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Spindle bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workhead swivelling: 360° Grinding spindle head swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±10° Table longitudinal travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (flying): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we not only deliver machines refurbished to as-new condition with warranty, but also offer service for your machines. Warranty: 12 months from delivery—for Germany and neighboring countries. Pure internal cylindrical grinding machine with stepless adjustable drive (0–100%). Available in current RAL colors! Standard centre height 175 mm, extendable to 225 mm. Fixed internal grinding spindle with belt tension via tension pulley! Z-axis reversing accuracy max. 0.01 mm! Geometrically overhauled and newly painted, with: - New electrical cabinet. - New three-phase workpiece spindle motor and controller. - 2-axis digital readout, X-axis resolution 0.5 μm. Options: - Encoder with digital display in the workhead - New stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height to max. 225 mm Nwjdpfx Afed Ih Dxe Njb Includes: - Operating tools Further accessories on request. The machine tool currently does not meet the fundamental safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The minimum required safety level must be determined by means of a risk assessment pursuant to BetrSichV.

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg including clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space required approx.: 3.1 x 2.0 m As the world’s leading company in the field of Kellenberger overhaul/retrofit, we not only offer machines delivered in as-new condition and with warranty, but can also provide comprehensive service for your machines, fully refurbished to metric standards and newly painted. Version R: Machine features central lubrication and roller guideways in the X-axis flat way as well as air lift in the grinding headstock. -Digital readout on 2 axes. X-axis resolution: 0.5 μm Optional equipment at extra cost: - Rotary encoder with digital readout in the workpiece headstock - Rotary encoder with digital readout in the grinding headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in centre height to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories available on request. Nodpfxed Ih D No Af Njwb At this time, the machine tool does not comply with the fundamental safety and protection requirements as specified in the BetrSichV 2015. Raising the required minimum protection level must be determined by means of a risk assessment according to BetrSichV.

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivels: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight – between centres: 130 kg incl. clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirements approx.: 3.1 x 2.0 m Machine completely overhauled according to Kellenberger standards. - Workpiece spindle drive utilises modern three-phase technology Nwjded Ih D Repfx Af Njb - 2-axis digital readout. X-axis resolution: 0.5 µm Optional extras (available at additional cost): - Rotary encoder with digital display on workpiece headstock - Rotary encoder with digital display on grinding headstock (not compatible with height adjustment via spindle) - New, robust internal grinding device, diameter 80 mm or 100 mm, with height adjustment - Centre height increase up to max. 225 mm - Variable speed control for grinding spindle Included accessories: - Operating tools - Collet tube for chuck Further accessories available on request.

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speeds: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/ø Continuous infeed: 0–0.95 mm/ø Table swivelling: ±8° Longitudinal table travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg including clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Photo shows identical machine, centre height 225 mm Version R: Machine equipped with central lubrication, roller guides on the X-axis flat bed, and pneumatic lift-off for the grinding headstock. - Digital readout in 2 axes. X-axis resolution 0.5 µm Nwsdpfx Aed Ih D Hof Nsb Options: - Rotary encoder with digital display on the workpiece headstock - Rotary encoder with digital display on grinding headstock (no height adjustment via spindle possible) - New rigid internal grinding attachment diameter 80 mm or 100 mm, with height adjustment - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine tool does not currently comply with the essential health and safety requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The required minimum safety objective must be determined by means of a risk assessment in accordance with BetrSichV.

Sąlyga: naudotas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m As a world-leading company for Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new quality and with warranty, but can also offer you comprehensive service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical cabling, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute encoder (for B axis) Standard Equipment: - Workhead with MK5 taper, optionally with MK5/short taper adapter - Tailstock with MK4 taper. Optionally with fine adjustment - Grinding spindle stock T1/T2/T3 Njdpfxeuwv H Hj Af Nowb - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on grinding spindle stock) ELASO integrated into control interface - Semi-automatic balancing by ELASO integrated into control interface - BEMAT grinding wheel measurement Optional at extra cost: - HF internal grinding spindle - Ultra-precise, highly torsion-resistant workpiece spindle - Measuring control - Extraction unit - Paper band filter Control: Basic Grinding Cycles - Workpiece zeroing with Z-position (longitudinal positioning) - Wheel measurement with BEMAT - Approach sensor GAP - Measurement of dressing diamonds - Corrections - External and internal cylindrical grinding (traverse and plunge grinding) - External and internal taper grinding (B axis swivel, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional Grinding Cycles - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Sąlyga: naudotas, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding head swiveling: 180° ± Grinding spindle speeds: 1500, 1700, 2200 rpm Infeed in steps: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swiveling: ±6.5° Longitudinal table travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece weight max. (between centres, including clamping): 130 kg Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guideline Including new, modern and future-proof control system. Nodpfx Afeuxftro Nswb Photo shown: Example of an already delivered machine with special options -The operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original controller, so no retraining is required. -Diagnostics function with display of PLC notifications and digital I/Os -Dressing function can be expanded or modified on request. -Spindle positioning of the workpiece spindle available on request. -New maximum infeed: 40 mm, can be extended on request. -Digital readout on 2 axes. X-axis resolution: 0.5µm Options: -Encoder with digital readout on workpiece headstock -Encoder with digital readout on grinding headstock (no height adjustment possible with spindle) -New robust internal grinding device, Ø80 mm or Ø100 mm -Increase of centre height up to 225 mm -Spindle speed control for grinding spindle Included: -Operating tools -Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic longitudinal and rapid table traverse. Versatile application possibilities in production for external and internal grinding, or for external, face, and internal grinding in a single setup for individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Gauging control The machine currently does not comply with the basic health and safety requirements as specified in BetrSichV 2015. The required minimum safety target must be determined by a risk assessment according to BetrSichV.

Sąlyga: naudotas, Gamybos metai: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -T6: internal grinding attachment -T7: internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP control on T1 and T2 by ELASO (contactless), integrated into the control interface -GAP control on T3/T4 via fluid sensor Nodpfx Ajuxfu Njf Nowb -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock, hydraulic with fine adjustment +/-150 µm -Dressing device on the lower table, workpiece spindle side -Dressing device on the lower table, tailstock side -Dressing device on the upper table -New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece headstock with direct drive *highly recommended for non-circular grinding *max. workpiece weight, between centers: 150 kg *max. workpiece weight, overhung: 75 kg *water-cooled *Morse taper 5 combined with short taper mount to DIN 55026 *spindle orientation stop *fixed lower section B-axis with direct drive, center height 225 mm *extremely torsion-resistant *high positional accuracy *resolution ° *water-cooled MECHANICAL OVERHAUL: - Complete machine overhauled according to Kellenberger measurement protocol - New paintwork New hydraulic unit: - Improved temperature control (oil cooler) - Energy-saving: only one pump, and not running continuously! - Pressure monitoring - Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X axis - Wear-free, since no contact during operation - No loss of accuracy, even during prolonged operation under full load at maximum speed - Friction-free at low speeds - No reversal jump of friction force when changing direction - Transmits smallest rotational movements - No stick-slip effect even at low speeds - No fluctuation in friction torque due to recirculating balls - Higher axial stiffness than ball screw drives - Significantly better damping, leading to improved workpiece surface and longer tool life - No vibrations due to recirculating balls - Also suitable for high speeds and accelerations - Cost-effective alternative to linear motors, offering higher accuracy and much less heating - Much lower power loss and thus no swarf issues on permanent magnets - Much lower cooling requirements compared to linear motors ELECTRICAL OVERHAUL: -New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface -Newly constructed control cabinet -New drive technology -Replacement of all electrical wiring (Berus pressure switches etc.) -New absolute glass scales in X and Z -New absolute encoder (for B-Axis) CONTROL SYSTEM: The grinding software consists of a base license and various options, depending on the machine configuration. Software base functions: - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillation grinding - Workpiece...

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel range: ±8° Longitudinal table travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. cantilevered workpiece weight: 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we not only deliver machines in as-new condition and with warranty, but can also provide service for your machines, including recently delivered machines, with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle display Available at extra cost. Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guides in the flat bed of the X-axis as well as pneumatic lift-off in the grinding headstock as standard. - Digital readout in 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) - New, robust internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Increased centre height up to a maximum of 225 mm - Variable speed control for the grinding spindle Includes: - Operating tools - Clamping tube for chuck Nwodpfxsuxftxj Af Nsb Further accessories available on request. The machine tool does not currently comply with the basic safety and protection requirements as specified in the 2015 Industrial Safety Regulation (BetrSichV). The necessary minimum safety objectives must be determined by means of a risk assessment in accordance with BetrSichV.

Sąlyga: naudotas, Gamybos metai: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm The machine was overhauled according to the Kellenberger inspection protocol and newly repainted. The prone-to-failure Güttinger control system was replaced with the modern BEMA X control system. This means the machine also received a completely new electrical system as part of this upgrade. Machine equipped with a reinforced workpiece spindle head for chuck grinding of heavy workpieces. Nwsdpfxjvq R Uzj Af Neb Currently, the machine does not meet the fundamental safety and protection requirements specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). Raising the required minimum safety standard must be determined by means of a risk assessment according to BetrSichV.

Sąlyga: naudotas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Center height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180 ± ° Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Maximum workpiece weight (unsupported): 130 kg (including clamping) Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirements approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhaul/retrofit, we not only deliver machines in as-new quality with warranty, but also provide service for your machines, metrically overhauled and freshly painted. Photo shows a machine already delivered, possibly with different options. Machine is equipped standard with central lubrication and roller guides in the X-axis flatway, as well as air lift-off in the grinding headstock. Nedpfxed Ih D Eo Af Njwb BEMA Standard Equipment: - Digital readout in 2 axes. X-axis resolution: 0.5 μm - Grinding spindle speed display - Infinitely variable grinding spindle speed 70–100% - Infinitely variable internal grinding spindle speed 70–100% - Workpiece spindle drive powered by three-phase motor, infinitely variable via frequency converter Available options at extra cost: - Encoder with digital display in workpiece headstock - Encoder with digital display in grinding headstock (height adjustment via spindle not possible) - Sine bar - New robust internal grinding attachment, 80 mm or 100 mm diameter, with height adjustment - Increase center height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid in neighboring countries only). Further accessories on request. The machine tool does not currently comply with the essential health and safety requirements as set out in BetrSichV 2015. An assessment of the necessary minimum protection level must be determined by a risk assessment in accordance with BetrSichV.

Sąlyga: naudotas, Grinding diameter: 250 mm Grinding length: 1000 mm Centre height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: +/- 360° Grinding spindle headstock swiveling: +/- 0° Infeed (incremental): 0–9.99 mm/Ø Infeed (continuous): 0–9.99 mm/Ø Table swivel: +/- 10° Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Nwsdpfsd Ih Egsx Af Njb Max. workpiece weight (overhung): 130 kg incl. clamping Cross traverse: 270 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 5.5–7.5 kW Machine weight approx.: 2.7 t As a global leader in the field of Kellenberger overhauls/retrofits, we are not only able to deliver machines in as-new condition with warranty, but can also offer you service for your machines. Geometrically overhauled and newly painted according to Kellenberger measurement protocol. Completely new electrics with new infeed control. Photos show a previously delivered machine of the same design, but with 1500 mm centre distance and universal grinding head instead of the 500 mm wheel head, purely for external cylindrical grinding purposes. Equipment: - 2-axis digital readout - New DGS paper band filter Optional at extra charge: - Semi-automatic dressing - Dressing size compensation - GAP Control - Measuring automation - Safety doors Electronically controlled infeed system with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Powerful, non-swiveling grinding spindle headstock for production external cylindrical grinding operations. Areas of application: Machining of high-precision components in the gearbox, machine tool, and general mechanical engineering sectors. Pair grinding for the hydraulics industry. At present, the machine tool does not meet the basic safety and protection requirements such as those specified in BetrSichV 2015. The required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Sąlyga: naudotas, Gamybos metai: 1982, Grinding diameter 630 mm Grinding length 600 mm Nsdpfx Aov Dxxzef Njwb Centre height 320 mm Machine equipped with reinforced workpiece headstock for unsupported grinding of heavy workpieces. The machine will undergo a major service/partial overhaul including a geometry inspection report in accordance with Kellenberger new machine standards. The machine tool currently does not meet the essential safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The necessary minimum safety objectives must be determined in the course of a risk assessment in accordance with BetrSichV.