Universalios cilindrinės šlifavimo staklės

KELLENBERGER 1000U-175

Būklė: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. clamp jaw opening: 90 mm Min. panel dimensions from the rear: 1,830 x 915 mm Max. panel dimensions from the rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Working table height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic setting of the scorer relative to main saw QUICK CHANGE: rapid blade change at the touch of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measurement system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamps on the pusher with double fingers 3 front aligners 16 support roller rails behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement mechanism for table 2 Automatic ejection of end pieces beyond the cutting line Material support surface under pusher with brush-lined rollers, suitable for sensitive surfaces Machine table with air nozzles for delicate surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring the main spindle speed Software package: Podpfx Afjxranps Uepr - QUICKOPTI for cutting pattern optimization directly at the machine - OSI PLUS INTERFACE VERSION - OPTIPLANNING optimization software incl. hardware dongle, permits management of up to 10 users via network - OS LABELLING: graphic editor in the machine control, including drawing of workpieces, real-time label printing at the machine possible - COMMUNICATION STORAGE FEED SYSTEM - SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Rotating suction frame 0 - 180 degrees equipped with controlled axis Panel alignment/squaring system consisting of 3 photoelectric cells mounted on pneumatic cylinders Panel weight detection via load cell installed on the suction frame in the separation area, checks whether the specified weight is within the expected range for this panel type. If not, the panel is set down again and the separation cycle is restarted. Roller conveyor for loading and unloading stacks 4,200 mm Software: LINE SUPERVISOR with storage mapping, catalog, import of processing data from the optimizer, management of parts lists, system control

Gamybos metai: 2002, būklė: paruoštas naudoti (naudotas), Su dviem apdirbimo moduliais, X ašis: -50 iki 725 mm, Y ašis: -200 iki 300 / -250 iki 250 mm, greitas judėjimas X, Y, Z ašyse: 18/12/30 m/min, valdymas: Siemens Sinumerik, temperatūros diapazonas: 5-40°C, srovės tipas/dažnis: 3 PEN/50 Hz, vardinė įtampa: AC 400V, valdymo įtampa: DC 24V, pagalbinė įtampa: AC 230V, prijungimo galia: 102 kVA, vardinė srovė: 148A, vardinė srovė (greita): 148A, saugiklis (lėtas): 160A, ilgis: 8000 mm, plotis: 3000 mm, aukštis: 4000 mm, svoris: apie 17 t, darbo valandų skaičius: apie 80 000 h. Mašina visiškai veikianti, Z ašies rutulinio sraigto pavarą (aplinkinis sraigtas) atnaujinta 2024 m., reguliariai prižiūrėta. Su dokumentacija, valdymo spintele, hidraulikos agregatu, filtravimo elementais ir drožlių transporterių. Galima apžiūra vietoje. Pedowbuyzjpfx Af Uepr

Būklė: geras (naudotas), Gamybos metai: 2014, Spindle speeds: 170 – 18,000 rpm Machine weight: approx. 7.5 t Space requirements: approx. 5.00 x 4.00 x 2.20 m --> Control system retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data – Grinding diameter: 20 – 300 mm --> Swing diameter: 350 (500) mm --> Workpiece length: 300 (1,300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm Ppjdpfx Afjw Intaj Uor --> Rapid traverse: 12 m/min --> Grinding stroke speed: 0 – 9.99 m/min --> Infeed speed: 0 – 99.99 m/min --> Step infeed value during reversal: 0 – 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min / revolution --> Grinding stroke speed: 0 – 5 m/min / revolution --> Infeed speed: 0 – 99.99 m/min / revolution --> Step infeed value during reversal: 0 – 0.999 mm / Ø --> Swiveling capability of the workpiece spindle head: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Traverse speed: 5 m/min --> Center height above workpiece table: 200 (300) mm --> Center height above grinding table: 330 (430) mm --> Workpiece spindle bore: 50 (70) mm --> Original year of manufacture: 1988

Būklė: naudotas, Gamybos metai: 2012, Funkcionalumas: ribota funkcionalumas, veikimo valandos: 43 100 h, X ašies eiga: 800 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 550 mm, valdiklių gamintojas: Heidenhain iTNC530, valdiklio modelis: 530, X ašies padavimo greitis: 60 m/min, Y ašies padavimo greitis: 60 m/min, padavimo greitis Z ašis: 60 m/min, greitasis eiga Z ašyje: 61 m/min, greitas poslinkis X ašimi: 61 m/min, greitas poslinkis Y ašis: 61 m/min,

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: Ppjdpouxft Eofx Af Uer -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Prima Industrie Platino 1530 laser cutting machine with only 4,300 cutting hours This Prima Industrie Platino 1530 laser cutting machine, 4.0kW CO₂, was manufactured in Italy in 2011 and installed at the end of 12/2011. Equipped with a PRIMACH 20 L control unit. Pjdpfx Afsivg Hge Uspr

Būklė: geras (naudotas), Gamybos metai: 2017, veikimo valandos: 8 800 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: NL2561708843, ašies skaičius: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length (mm): 705 Max. Turning diameter (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): 740 Bar capacity (mm): 80 Tool Magazine Tool stations: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tools power (kW): 5.5/4.9/4.2 (3 min/5 min/continuous) Rapid traverse rate (m/min): 30 Main Spindle Max. spindle speed (rpm): 4,000 Spindle motor power (kW): 18.5/18.5/15 (25%ED/50%ED/continuous) Max. torque (Nm): 49 Sub-spindle Max. spindle speed (rpm): 5,000 Spindle motor power (kW): 11/7.5 (25%ED/continuous) Max. torque (Nm): 22 Sub-spindle travel (mm): 734 Cooling System Tank capacity (L): 366 Ppsdpfoyzxcgjx Af Ujr Equipment Chip conveyor Signal light Machine hours: Power-on hours: 19,393 Cutting hours: 8,800 Rated power (kVA): 48 Base Machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 Depicted tools, driven tools and both chucks are not included in the scope of delivery.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 475 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 400 mm, ruošinio svoris (maks.): 200 kg, sukimosi greitis (maks.): 42 000 aps./min, stalo skersmuo: 450 mm, 5-Axis Röders Tec RXP800DS -completely overhauled- Psdevvlmcjpfx Af Uspr The machine is fully overhauled, inspected, and calibrated at our facility. The machine once again meets new-machine tolerances! Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Passage height: 500 mm Tool changer: 52 stations Spindle: HSK40E, max. 42,000 rpm Tool measurement laser for tool inspection Handheld control unit Minimum quantity lubrication Prepared for extraction system (e.g., for graphite machining) Spindle compensation Precision package Control system: Röders RMS6, current version The machine can be inspected in fully operational condition at any time. For further information on the type and scope of our overhauled machines, please visit our website or our Hüttmann YouTube channel.

Gamybos metai: 2008, būklė: paruoštas naudoti (naudotas), Grinding area: 2000x900 mm, cross travel: 875 mm, longitudinal travel: 2450 mm, distance from table to spindle center: 845 mm, magnetic chuck dimensions: 2000x800 mm, max. table load: 2.3 t, longitudinal feed: 1,000–30,000 mm/min, cross feed: 0.01–2,000 mm/min, vertical feed: 0.001–1,500 mm/min, grinding wheel dimensions: 500x100x203.2 mm, grinding spindle motor power: 22 kW, length: 6,800 mm, width: 3,450 mm, weight: 13 t. An on-site inspection is possible. Pjdpfxeuyk N Ij Af Ujpr

Būklė: naudotas, Gamybos metai: 2007, Sūkių skaičius 8000 /min Svoris 5500 kg Pagaminimo metai 2007 Valdymas Siemens 840D Matmenys (Ilgis/Plotis/Aukštis) 3600 x 2800 x 2400 mm Eigos ilgis - x 1035 mm Eigos ilgis - y 560 mm Eigos ilgis - z 510 mm Yra daugiau nuotraukų Pedpfxswm Rqae Af Uopr