Cilindrinio šlifavimo staklės - Universalios

KELLENBERGER 600U BEMA Advance

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Pgjdpfjd Ih D Nox Apysk Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg including clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space required approx.: 3.1 x 2.0 m As the world’s leading company in the field of Kellenberger overhaul/retrofit, we not only offer machines delivered in as-new condition and with warranty, but can also provide comprehensive service for your machines, fully refurbished to metric standards and newly painted. Version R: Machine features central lubrication and roller guideways in the X-axis flat way as well as air lift in the grinding headstock. -Digital readout on 2 axes. X-axis resolution: 0.5 μm Optional equipment at extra cost: - Rotary encoder with digital readout in the workpiece headstock - Rotary encoder with digital readout in the grinding headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in centre height to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories available on request. At this time, the machine tool does not comply with the fundamental safety and protection requirements as specified in the BetrSichV 2015. Raising the required minimum protection level must be determined by means of a risk assessment according to BetrSichV.

Gamybos metai: 2002, būklė: paruoštas naudoti (naudotas), Su dviem apdirbimo moduliais, X ašis: -50 iki 725 mm, Y ašis: -200 iki 300 / -250 iki 250 mm, greitas judėjimas X, Y, Z ašyse: 18/12/30 m/min, valdymas: Siemens Sinumerik, temperatūros diapazonas: 5-40°C, srovės tipas/dažnis: 3 PEN/50 Hz, vardinė įtampa: AC 400V, valdymo įtampa: DC 24V, pagalbinė įtampa: AC 230V, prijungimo galia: 102 kVA, vardinė srovė: 148A, vardinė srovė (greita): 148A, saugiklis (lėtas): 160A, ilgis: 8000 mm, plotis: 3000 mm, aukštis: 4000 mm, svoris: apie 17 t, darbo valandų skaičius: apie 80 000 h. Mašina visiškai veikianti, Z ašies rutulinio sraigto pavarą (aplinkinis sraigtas) atnaujinta 2024 m., reguliariai prižiūrėta. Su dokumentacija, valdymo spintele, hidraulikos agregatu, filtravimo elementais ir drožlių transporterių. Galima apžiūra vietoje. Pgsdpfx Apjwbuyzjyek

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, CNC plokščiojo, profilio ir giluminio šlifavimo staklės ELB-Schliff smartLine BD15 KXT XC Valdymas: Xpress Cube Pagaminimo metai: 2022 Šlifavimo plotis: 600 mm Pedpfeyk Tb Uex Apysgk Šlifavimo ilgis: 1 500 mm Šlifavimo aukštis: 500 mm Šlifavimo disko skersmuo: 400 mm Stalo apkrova: 1 200 / 625 kg Veleno pavara: 10 – 52 kW Veleno kūgis: 60 / 75 mm Apsisukimų diapazonas: 1 450 – 3 500 aps./min Priedai Juostinio filtro sistema Aušinimo skysčio rūko ištraukimo sistema, tipas VMN-V12 Balansavimo sistema Magnetinė plokštė

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2014, veikimo valandos: 925 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 500 mm, sukimosi skersmuo virš skersinio stumduko: 290 mm, tekėjimo skersmuo: 500 mm, veleno greitis (maks.): 5 500 aps./min, veleno skylė: 73 mm, X ašies eiga: 210 mm, Y ašies eiga: 80 mm, Z ašies eigos atstumas: 525 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 22 m/min, greitasis eiga Z ašyje: 30 m/min, bendras aukštis: 1 808 mm, bendras ilgis: 4 447 mm, įvorės išorinis skersmuo: 210 mm, bendras plotis: 2 378 mm, sūpynės skersmuo virš skersinio vežimo: 290 mm, veleno nosis: FL 140h5, bendras svoris: 4 300 kg, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, 925 veleno valandų, kitaip tariant – praktiškai kaip nauja; būtent tokios būklės yra ši DMG MORI CTX ALPHA 500 V4! Įrenginys atkeliavo iš prototipų skyriaus, kuriame daugiausia buvo apdirbama plastikas. Papildomos galimybės ir priedai: - SMW Autoblok 210 BB Ø210mm (įskaitant žandų komplektą) - DMG CELOS programinė įranga - Drožlių transporteris - Aukšto slėgio aušinimas Pgodpfx Asy Duinopyok - Pedalas griebtuvui suveržti/atleisti - Įvairūs įrankių laikikliai (varomi ir statiški) - Originali DMG dokumentacija Svoris ir matmenys: 4.300 kg 4447 x 2378 (įskaitant PLC) x 1808 mm

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. Pgodpfx Aeuxft Ejpyek The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: geras (naudotas), X-axis travel: 410 mm Y-axis travel: 310 mm Z-axis travel: 400 mm Main spindle taper: SK 40 Clamping surface of table: 700 x 280 mm Spindle speed: 45 - 2000 rpm Quill stroke: 63 mm Total power requirement: 2.2 kW Machine weight approx. 1,300 kg Space requirement approx. 2.1 x 2.1 x 1.7 m Voltage: 400 V 3-axis digital readout Heidenhain Pedpfx Apji Elydsyogk Fixed angular table Coolant system Swiveling vertical milling head

Būklė: geras (naudotas), Gamybos metai: 2000, Ram stroke – max. 2 – 300 mm Psdpfxjuayibo Apyogk Keyway width 2 – 32 mm Drive power 8 kW Strokes per minute 2 – 300 spm Throat depth approx. 300 mm Max. installation height approx. 450 mm Automatic feed 0.01 – 0.15 mm Working speed 0 – 30 m/min Return speed 30 m/min Machine weight approx. 2.2 t Space requirement approx. 2.5 × 1.5 × 2.2 m The BALZAT keyseating machine offers the following advantages: - Infinitely variable adjustment of the cutting speed with constant return speed, even during operation - Simple clamping of workpieces using standard clamping tools, no additional tool holders required - Maximum dimensional accuracy thanks to self-centering, centrally positioned tool holders - Feed can be adjusted during program operation - Machine base also serves as a reservoir for cutting oil - All components are easily accessible and replaceable

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Pgedpeqt Dmyofx Apysk Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, 1 naudotas garo katilas Gamintojas: LOOS, Gunzenhausen Tipas: UL-S 2000 Galia: 1 500 kg/val. Didžiausias leistinas darbinis slėgis: 13 bar Padidintas bandymo slėgis: 24,7 bar Pilnas vandens tūris apie: 3 315 l Pagaminimo metai: 2005 CE žymėjimas: CE 0036 Psdpfx Asx Sxkfopysgk Komplektuojamas su Weishaupt dujiniu degikliu, atskira valdymo spintele, dujų reguliavimo linija, maitinimo vandens siurbliu bei esamomis stambiomis ir smulkiomis armatūromis.

Būklė: naudotas, Manufacturer: CINCINNATI Psdpfx Apswrpyksyegk