Cilindrinė šlifavimo mašina

KELLENBERGER 1500U

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1845/455, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, bearing replacement, belt replacement, spindle disassembly, replacement of seals and O-rings + adjustment. Newly painted. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, belt replacement. New spindle bearings. Newly painted. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, belt replacement. New spindle bearings. Newly painted. Internal Grinding Attachment Disassembly, cleaning of parts, replacement of worn and defective components, assembly of the mounting and alignment of geometry. Newly painted. Hydraulics Disassembly, motor replacement, replacement of hoses and worn or defective parts. Hydraulic block checked. X Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., hydraulic piston overhaul, table grinding. Z Axis Disassembly, table grinding, replacement of worn and defective parts, hydraulic piston overhaul, scraping of V and flat guides. Newly painted. Measuring System 2-axis digital readout included Electrical Cabinet Replacement of motor terminals and relay controls. New wiring. New frequency inverter for the workhead. TECHNICAL SPECIFICATIONS Distance between centers 1500 mm Distance between centers (headstock and overhanging tailstock) 1650 mm Center height, standard 125 mm Center height with raising blocks 225/250 mm Maximum grinding diameter Ø 250 mm Maximum grinding diameter with raising blocks 450/500 mm Table Usable surface 2060x140 mm Maximum length and width for surface grinding 1750x200 mm Manual or hydraulic longitudinal travel 1750 mm Manual table movement per handwheel revolution – coarse 20.006 mm Manual table movement per handwheel revolution – fine 2.457 mm Continuous table speed, hydraulic –6 m/min Table swivel 6° Stop, return 0–5 sec. Work Spindle Workpiece speeds, continuously variable 20–400 min-1 Gsdpfext Ilfjx Acyebi Swivel 360° Work spindle internal taper MT5 Tailstock Tailstock spindle internal taper MT3 Manual or hydraulic spindle retraction travel 30 mm Dressing diamond internal taper MT0 Universal Grinding Head Transverse wheel slide travel 285 mm Rapid traverse, wheel slide (forwards & backwards) 40 mm Grinding spindle speeds 1500 – 1700 – 2200 – 3600 min-1 Vertical movement of grinding spindle, center height 125–330 mm Cylindrical grinding wheel, max 400x50x127 mm Surface grinding wheel, max 250x20x76 mm Swivel of grinding head with locking at 90° increments 270° Wheelfeed One division of vernier 0.005 mm/Ø Automatic feed, max 0.9 mm/Ø Motors Grinding spindle motor 2,900 min-1 / 4.0 hp Workhead spindle motor 3,000 min-1 / 2.0 hp Coolant pump motor 2,850 min-1 / 0.12 hp Internal Grinding Device Bore 70 mm Int. grinding spindle speed Ø70 mm 14,000 min-1 Int. grinding spindle speed Ø50 mm 21,000 min-1 Unless otherwise stated, the technical data is provided without guarantee of accuracy or completeness.

Būklė: dilaminuotas dirbtuvėje (naudotas), Zu verkaufen: EOS M400 – Hochleistungs-Metall-3D-Drucker Diese EOS M400 ist ein fortschrittliches Metall-Additive-Manufacturing-System, das sich direkt beim Kundenstandort befindet. Ausgestattet mit einem 1kW-Laser gewährleistet sie höchste Präzision und Produktivität für industrielle Großserienanwendungen. Spezifikationen: • Laserleistung: 1 kW • Technologie: Direct Metal Laser Sintering (DMLS) Verarbeitbare Materialien: Dieses System unterstützt eine breite Palette von Werkstoffen und ist damit ideal für vielfältige Anwendungen in Branchen wie Luft- und Raumfahrt, Automobil und Medizintechnik. Kompatible Materialien: • Nickelbasierte Legierungen: IN718_1, HX-1, IN625_1, IN939_1 • Aluminiumlegierungen: AlF357_1, AlSiMg_1 • Kupferlegierungen: CuCrZr_1, Cu_1 • Edelstähle: GP1_1, PH1_1 • Werkzeugstähle: MS1_1, SP2_1 • Titanlegierungen: Ti64_1, Ti64ELI_1, Ti64Grade23_1, TiGrade5_1, TiCP_1 • Individuelle Gasoptionen: CustomAr, CustomN2 • Kobalt-Chrom: MP1_1 Ihre Vorteile mit der EOS M400: • Großes Bauvolumen für industrielle Fertigung im großen Maßstab • Hohe Laserleistung für gesteigerte Geschwindigkeit und Präzision • Vielseitige Materialkompatibilität für flexible Einsatzmöglichkeiten Inklusive Serviceleistungen: • Transport- & Installationsunterstützung: Wir organisieren den sicheren Umzug und die fachgerechte Installation bei Ihnen vor Ort. • Wartungspläne durch Experten: Flexible Wartungskonzepte, damit Ihre Anlage stets optimal läuft. Über Inframotion 3D (IM3D) Die Inframotion 3D B.V. ist auf hochwertige, generalüberholte EOS-Additive-Manufacturing-Systeme inklusive umfangreicher Services spezialisiert. Als einziger Anbieter mit Komplettlösung für gebrauchte EOS-Anlagen gewährleisten wir zuverlässige Maschinen, maßgeschneiderte Dienstleistungen und Premium-Materialien für Ihre Produktion. Gsdpfxovq Sm Ee Acysbi Unser Angebot: • Expertenservice: Installation, Wartung und Upgrades durch erfahrene Ex-EOS-Techniker • Exklusive Materialien: Hochwertige Verbrauchsmaterialien, die für EOS-Systeme geprüft und optimiert sind • Rundum-Betreuung: Von Transport bis hin zu individuellen Wartungsplänen übernehmen wir alle Details Vertrauen Sie auf IM3D, um Ihre Metall-Additive-Manufacturing-Kapazitäten zuverlässig zu skalieren. Kontaktieren Sie uns für weitere Informationen oder Anfragen!

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workpiece headstock swivelling: 360° Grinding spindle head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±6° Longitudinal table travel: 1750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight, cantilevered: 130 kg including clamping Internal spindle mount: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Required floor space approx.: 5.6 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver the machines in as-new quality with warranty, but can also offer you comprehensive service for your machines. Geometrically overhauled and freshly painted with original electrics, but with new WSS drive and controller in three-phase technology. Optionally available with splash guard doors and X-axis enclosure. - 2-axis digital readout. X-axis resolution 0.5 μm Available options at extra charge: - Swivel angle display for upper table - Rotary encoder with digital readout in the workpiece headstock - Rotary encoder with digital readout in the grinding spindle headstock (spindle height adjustment not possible) - New robust internal grinding attachment, 80 mm or 100 mm diameter, with height adjustment - Increase of centre height up to max. 225 mm Included: - Operating tools - Clamping tube for chuck Gbsdpfjd Ih Dvjx Acyoi Further accessories on request. At present, the machine tool does not meet the essential health and safety requirements as specified in the German Industrial Safety Ordinance (BetrSichV 2015). The required minimum safety objectives must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Gedpfed Ih Dwjx Acysbi Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ± 6° Table longitudinal travel: 1750 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (overhung): 130 kg including clamping device Internal spindle mounting: 80 mm Total connected load: 6.5 kW Machine weight: approx. 2.9 t Space requirement: approx. 5.6 x 2.0 m Geometrically overhauled and newly painted. Photos show identical 1000mm model. Included: - New control cabinet - Modern workpiece headstock from Advance model - New workpiece spindle drive - Modern hydraulic unit - Lift-off function for grinding headstock - Modern internal grinding attachment - Operating tools Extension: Table swiveling increased to 10° Optional: - Swivel angle indicator for upper table - Swivel angle indicator for workpiece headstock - Swivel angle indicator for grinding headstock - Splash guard door for Z-axis - Splash guard enclosure for X-axis etc. ADDITIONAL SERVICES: - Machine servicing - Grinding technology consulting - Operator training - Spare parts - Accessories

Būklė: labai geros būklės (naudotas), CNC tekinimo staklės su Y ašimi DMG MORI - CTX BETA 800 4A MACH-ID 9282 Gamintojas: DMG MORI Tipas: CTX BETA 800 4A Valdymas: Siemens 840 D-SL Gjdpfx Acjxuqw Hjyobi Pagaminimo metai: 2012

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, centro aukštis: 250 mm, plotis centre: 1 500 mm, šlifavimo skersmuo: 500 mm, Griebtuvėlio eigos ilgis: 30 mm, Įranga: dokumentacija / vadovas, Mašina buvo iš dalies kapitališkai suremontuota ir apima, be kita ko, naują geometriją ir naują valdymo spintą. Guolis buvo pakeistas. TECHNINIAI DUOMENYS Apdirbimo sritis Atstumas tarp centrų: 1 500 mm Centrų aukštis: 250 mm Didžiausias šlifavimo skersmuo: 500 mm Stalo pasukimas: ± 8° Šlifavimo galvutė Gjdexgrd Sjpfx Acyjbi Šlifavimo disko matmenys: 400 x 50 x 127 mm Veleno apsukos: 1 500 / 1 700 / 2 200 aps./min Vidinis veleno gręžimo skersmuo: 90 mm Ruotinės laikiklis Ruotinės laikiklio pasukimas: 180° Veleno apsukos: 20 - 400 aps./min Vidinis kūgis: Morse 5 Griebtuvė Griebtuvės vidinis kūgis: Morse 4 Griebtuvės judesio eiga: 30 mm MAŠINOS DUOMENYS Pavaros Šlifavimo galvutės variklio galia: 3 kW Griebtuvės variklio galia: 0,9 kW Mašinos išmatavimai: 2 860 x 1 680 x 1 670 mm Svoris: 2 500 kg ĮRANGA Automatinis darbo ciklas Tepalo rezervuaras su siurbliu Vidinis šlifavimo velenas Išoriniai šlifavimo diskai Ausinimo įrenginys Dokumentacija Pastaba: Skaitmeninis indikatorių blokas gali būti įsigytas papildomai už 3 600 €.

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight: approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor are electrically interlocked! Internal grinding spindle can only be activated when in position. A quantum leap in safety technology. - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of grinding spindle speeds Gbjdpfx Aot Ii Rrecyei - Swivel angle display for the upper table - Swivel angle display for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid contact sensor for internal grinding - Centre height up to 250 mm possible The machine is already delivered. An identical machine can be configured with additional options. The machine tool currently does not comply with the fundamental safety and protection requirements as stipulated in the German Operational Safety Ordinance (BetrSichV) 2015. An increase of the required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, X ašis 1.500 mm Y ašis 660 mm Z ašis 600 mm Stalo dydis 1.680 x 660 mm Veleno greitis 12.000 aps./min Įrankio laikiklis SK40 Įrankių keitiklis 24 pozicijos Valdymas ULTIMAX 4 Įskaitant 4-os ašies Kitagawa MR 200 (sukamoji ašis + atraminis taškas) Gedsxm Tufjpfx Acyjbi Įskaitant drožlių transporterį Įskaitant vidinį aušinimą (IKZ)

Būklė: naudotas, Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 07-16 1990, X ašies eiga: 2 000 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 800 mm, Parduodama geros būklės mašina, kaip matyti nuotraukose, pagaminta 1990 m., su NCT 90 valdymu. Naudota labai mažai, parduodama dėl neišnaudojimo. Bendras mašinos svoris – 33 tonos. Mašina visiškai veikianti. Išardymas ir transportavimas yra pirkėjo atsakomybė. Gbsdpfx Acjw Sx Ageyei

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, GÖCKEL G50 ELTT Precision Grinding Machine Godpfxjv D Huqs Acyobi Year of manufacture: 2005 Magnetic table length: 4500 mm, width: 150 mm CNC controlled In working condition