Apvalios šlifavimo staklės, šlifavimo ilgis 1100–2099 mm pirkti naudotą (52)

Būklė: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, Centru aukštis: 250 mm Atstumas tarp centrų: 2000 mm Maksimalus ruošinio svoris: 500 kg Fgolhcdjy Nx H Uewwjb

Būklė: naudotas, Gamybos metai: 1968, Techninės detalės: Folhcsy Nd Iwjdwwjgb Šlifavimo skersmuo: 350 mm Šlifavimo ilgis: 1000 mm Mašinos svoris apie: 2 t

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, ruošinio svoris (maks.): 130 kg, šlifavimo ilgis: 1 500 mm, šlifavimo disko skersmuo: 500 mm, bendras plotis: 2 155 mm, bendras ilgis: 5 465 mm, bendras aukštis: 1 700 mm, šlifavimo skersmuo: 300 mm, šlifavimo ratuko plotis: 63 mm, Apvali šlifavimo staklės buvo generališkai suremontuotos 2021 m. ir nuo to laiko beveik nenaudotos. Staklių būklė – praktiškai kaip nauja. Komplektacija kaip nuotraukose. Staklės prijungtos prie elektros tinklo ir jas galima bet kada apžiūrėti pagal susitarimą. Fslhex A Dfyscdwwegb Techniniai duomenys: Šlifavimo diametras: 300 mm Šlifavimo ilgis: 1500 mm

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Maximum workpiece length: 500 mm Minimum workpiece length approx.: 5 mm Maximum workpiece length for plunge grinding: 50 mm Maximum grinding diameter without steady rests: 100 mm Maximum diameter: 240 mm Workpiece Swiveling capability: 90° Grinding wheel slide Min./max. swiveling capability: 30° Min./max. cross travel incl. 300 mm rapid traverse: 100 mm Wheel diameter after rotation 1st range: 320 - 400 mm 2nd range: 260 - 320 mm Maximum workpiece weight between centers: 60 kg Maximum workpiece weight in chuck: 20 kg Maximum workpiece weight in faceplate: 20 kg 8 workpiece spindle speeds: 45 - 500 rpm Min./max. swiveling capability: 12° Fgjlewhp D Ushcdwwjb Min./max. longitudinal movement: 2 - 500 mm Table travel, stepless: 0.5 - 5 m/min Handwheel infeed: 2 and 20 per revolution

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Grinding length: 973 mm Centre height: 250 mm Maximum swiveling of workpiece table: +6° / -9° Centre taper: MT5 Maximum travel of grinding spindle headstock: 100 mm Maximum swiveling of grinding spindle headstock: +45° / -30° Fgjlswhp Dnehcdwwsb Maximum grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Maximum workpiece weight between centres: 400 kg Internal grinding device, maximum grindable bore: 160 mm Machine weight: approx. 5,000 kg

Būklė: naudotas, Gamybos metai: 2000, Šlifavimo skersmuo 300 mm Šlifavimo ilgis 1200 mm Ruoinio apsisukimų dažnis 6000 aps./min Fgjlhsy Dibxscdwweb Didžiausias ruoinio svoris 70 kg Valdymas FANUC Periferinis greitis 140 m/sek Šlifavimo diskas CBN 400 x 5 mm Veleno galia 24 kW Staklių svoris apie 11 t Quickpoint 5002/10 CNC išorinio apvalaus šlifavimo staklės, pagaminta 2000 m. - Reguliarūs techniniai aptarnavimai atlikti - Dokumentacija yra Papildoma įranga: - KSS įrenginys Junker novotecnic - Ištraukimo įrenginiai 2x LTA II R/H - Hyfra aušintuvas - 4 šlifavimo disko ruošiniai - Alyvos vonia su grotelėmis *Atsakomybės ribojimas: Visa pateikta informacija yra neįpareigojanti ir gali būti neišsami ar neatitikti tikrovės. Pasiliekame teisę keisti informaciją. Atsakomybė už pateiktos informacijos tikslumą ar pilnumą nepriimama. Mūsų pateiktų duomenų atskleidimas ar perdavimas be aiškaus rašytinio mūsų leidimo yra draudžiamas.

Būklė: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Judėjimo eiga Didžiausias šlifavimo skersmuo: 500 mm Didžiausias šlifavimo ilgis: 2 000 mm Maksimalus ruošinio svoris: 500 kg tarp centrų Šlifavimo galvos pasukimas: +45 / -15° (rankiniu būdu) Šlifavimo diskas: 500/80/203 mm Fgjlsy Idtqjhcdwwob Priedai: - Centravimo atrama - Apsauginis gaubtas Pagal užklausą galima parodyti ir vaizdo įrašą, kuriame matyti veikianti mašina.

Būklė: naudotas, Gamybos metai: 2012, Didžiausias šlifavimo skersmuo 320 mm Šlifavimo ilgis 1.500 mm Centrų aukštis 160 mm Valdymas Touch Jones & Shipman Didžiausias ruošinio svoris tarp centrų 100 kg Z ašies eiga 1.645 mm Judėjimo greitis Z ašyje m/min Pasukimas +5 / -5° X ašies eiga 260 mm Judėjimo greitis X ašyje – 6 m/min Šlifavimo verpstės variklis 7,5 kW Pjovimo greitis 45 m/s Šlifavimo diskas Ø x plotis x skylė 450 x 50 x 203,2 mm Pasukimo diapazonas -15 / +90° Sukimosi greičio diapazonas 0 – 660 aps./min. Sukimo momentas 27 Nm Tvirtinimas MK 3 Staklių svoris apie 8,5 t Užimamas plotas apie 5,5 x 2,5 x 2,0 m Išorinė apvalioji šlifavimo staklė JONES & SHIPMAN – Suprema Easy 1500 E - Atsarginis šlifavimo disko flanšas Felhjtqmrpscdwwogb - Daugiafrakcinis deimantas (aplinkiniam ir šoniniam profiliavimui, 10mm, 1 karatas) - Tarpinė galvutė su mikroreguliavimu (maks. reguliavimo eiga ±0,05mm) - Pneumatinis pinolės atitraukimas - Dviejų žiomenų luneta (skersmuo 8-75 mm)

Gamybos metai: 1962, būklė: naudotas, mašinos/transporto priemonės numeris: 35701,

Būklė: naudotas, mašinos/transporto priemonės numeris: 0257391, Centre height: 160 mm Centre distance: 1500 mm Grinding wheel dimensions: 500 x 127 x 40 mm Grinding wheel speeds: 1570/2050 rpm Electrical connection: 380 V kW Space required: 4400/6400 x 2000 x 1400 mm Weight: approx. 4000 kg Fjlsgayiwehcdwwjgb

Būklė: naudotas, CINCINNATI R 327 yra apvalus šlifavimo staklės, sukurtos siekiant užtikrinti tikslumą, didelį tikslumą ir patikimumą. Techniniai duomenys: centrų aukštis – 390 mm; centrų atstumas – 1600 mm; šlifavimo diskas Ø600×80 mm, skylė 305 mm; maks. šlifavimo skersmuo – 600 mm; ruošinio svoris tarp centrų maks. 400 kg; stalo pasvirimas ±10°. Techninės savybės: periferinis greitis 30 m/s; veleno skylė 38 mm, veleno kūgis 5 CM; ruošinio veleno 6 pakopos 16–168 aps./min; išorinio šlifavimo veleno variklis 15 kW; ruošinio veleno variklis 2 kW; prijungimas 3x380 V 50 Hz; staklių svoris – apie 8000 kg; matmenys – L4400×P2300×A2250 mm. Priedai: 450 L aušinimo skysčio įrenginys, šlifavimo diskų rinkinys, flanšas su disku, lemputė, hidraulinis prieštaškis. Užtikrina siauras tolerancijas; tinka automobilių, aviacijos, medicinos, mašinų gamybos, laikrodžių pramonei. Fgjlhcoyxn N Rjdwwjb

Būklė: naudotas, KELLENBERGER KEL-VARIA R175 x 1500 is a CNC cylindrical grinding machine designed for high precision, superior accuracy, and reliable operation. Capacities: center height 175 mm, center width 1500 mm, Z-axis 1650 mm, maximum workpiece weight 150 kg; grinding wheels Ø500×80 mm (bore 203 mm) or Ø400×63 mm (bore 127 mm); maximum grinding spindle travel 320 mm. Technical data: grinding wheel speeds steplessly adjustable from 1000 to 2150 rpm (peripheral speed 45 m/s); feed rate 7500 mm/min; workpiece spindle swivels -10/+100° with 8–800 rpm; permissible torque 160 Nm; grinding spindle motor 7.5 kW, workpiece spindle motor 2 kW; connection 3×400 V 50 Hz; rapid traverse 15 m/min; weight approx. 6000 kg; dimensions 4700×2300×2000 mm; compressed air 6 bar. Equipment: coolant unit, paper filtration system, MARPOSS touch probe, set of grinding wheels, live center, set of centers, set of workpiece drivers, set of gap gauges, lighting, 2 tool cabinets, tailstock with fine adjustment, coolant/mist extraction, collet chuck. Achieves tight tolerances Fgolhceyxn Itjdwwob

Būklė: naudotas, KELLENBERGER KEL‑VARIA R175 x 1500 yra CNC apvalus šlifavimo staklės, skirtos dideliam tikslumui, preciziškumui ir patikimumui užtikrinti. Talpa: centrų aukštis 175 mm, centrų atstumas 1500 mm, Z ašis 1650 mm, iki 150 kg; šlifavimo ratų skersmuo Ø500×80 mm (taip pat Ø400×63 mm). Techniniai duomenys: šlifavimo ratų greitis 1000–2150 min⁻¹, apvyniojimo greitis 45 m/s, šlifavimo eiga 320 mm, padavimas 7500 mm/min, varikliai 7,5/2 kW, greitasis režimas 15 m/min, 3×400 V, svoris ≈6000 kg, matmenys 4700×2300×2000 mm. Priedai: popierinis/aušinimo skysčio filtras, MOVOMATIC, Renishaw LP2H, flanšo nuėmėjas, nuotolinio valdymo pultas, MPM. Skirta siauroms tolerancijoms; pritaikymas: automobilių pramonė, laikrodžių gamyba, įrankių gamyba, aviacijos, medicinos technika. Fgelhjyxn A Recdwwjb

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Schaudt A500 500-2500 Grinding length: 500 / 750 / 1,000 / 1,500 / 2,000 / 2,500 mm Centre height: 150 mm / 180 mm / 225 mm Workpiece weight: 300 kg / 500 kg Additional freely selectable options: - Completely new control cabinet with basic PLC and panel - Conversion to ball screw drive incl. DUO-Control (cycle-controlled) - "Workpiece magazine" for 10/15/30/50 workpieces - Mini hand-held operating device for Duo-Control - Glass scale on X and Z axes - Grinding process sensors - Frequency converter for external grinding spindle - Swing-in internal grinding unit - Frequency converter for internal grinding spindle - CE marking in combination with partial or full encapsulation splash guard - Remote maintenance - Suitable coolant / extraction unit - Grinding wheel flange / change arm - and much more. We can also overhaul your existing stock machine! Fgelhcdwod Hfd Njwob Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and more.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Schaudt PF43 1000/1750 Grinding length: 1,000 / 1,750 mm Centre height: 150 mm Workpiece weight: 200 kg (optional higher capacity available) Further freely selectable options: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus CNC control - Quick setup via GSN operator interface - Diatronic measuring device - Freely positionable B-axis - Second external grinding wheel - Internal grinding attachment - Increased centre height - Dressing spindle for diamond profile roller - Balancing and touch sensors - Hydraulic tailstock clamping/unclamping - Automatic Siemens door drive - 19" / 22" screen - Remote maintenance - Conversion to needle nozzles - Suitable coolant/extraction system - Automation-ready - And much more We are also happy to overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and more. Fjlhcofg Ta Uedwwogb

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. New servo motors in the X-axis and for the workpiece headstock. Photo shows a previously delivered machine in original equipment. - Operation via the touch panel is extremely user-friendly. - The symbols on the control panel are virtually identical to the original control system, so no retraining is required. - Diagnostic function with display of PLC messages and digital I/O. - Dressing function can be expanded or modified according to customer requirements. - Option for spindle orientation of the workpiece spindle upon request. - New maximum infeed amount: 40 mm (can be further increased on request). - Digital readout in 2 axes. Resolution on X-axis: 0.5 µm Options: - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding spindle stock (no height adjustment possible with spindle) - New, robust internal grinding attachment with 80 mm or 100 mm diameter, including height adjustment - Increase of centre height to maximum 225 mm - Speed control for the grinding spindle Includes: - Operating tools - Draw tube for chuck Fgelhceuwv Idodwwob Additional accessories available on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external cylindrical and internal grinding, or for external, face and internal grinding of single workpieces in one setup. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control At present, the machine does not comply with the essential safety and protection requirements according to BetrSichV 2015 (German Occupational Health & Safety Regulation for the use of work equipment). Raising the required minimum protection level must be assessed by conducting a risk assessment according to BetrSichV.

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workpiece headstock swivelling: 360° Grinding spindle head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±6° Longitudinal table travel: 1750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight, cantilevered: 130 kg including clamping Fgslod Ih Dvohcdwwjb Internal spindle mount: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Required floor space approx.: 5.6 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver the machines in as-new quality with warranty, but can also offer you comprehensive service for your machines. Geometrically overhauled and freshly painted with original electrics, but with new WSS drive and controller in three-phase technology. Optionally available with splash guard doors and X-axis enclosure. - 2-axis digital readout. X-axis resolution 0.5 μm Available options at extra charge: - Swivel angle display for upper table - Rotary encoder with digital readout in the workpiece headstock - Rotary encoder with digital readout in the grinding spindle headstock (spindle height adjustment not possible) - New robust internal grinding attachment, 80 mm or 100 mm diameter, with height adjustment - Increase of centre height up to max. 225 mm Included: - Operating tools - Clamping tube for chuck Further accessories on request. At present, the machine tool does not meet the essential health and safety requirements as specified in the German Industrial Safety Ordinance (BetrSichV 2015). The required minimum safety objectives must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ± 6° Table longitudinal travel: 1750 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (overhung): 130 kg including clamping device Fjlhcsd Ih Dwedwwegb Internal spindle mounting: 80 mm Total connected load: 6.5 kW Machine weight: approx. 2.9 t Space requirement: approx. 5.6 x 2.0 m Geometrically overhauled and newly painted. Photos show identical 1000mm model. Included: - New control cabinet - Modern workpiece headstock from Advance model - New workpiece spindle drive - Modern hydraulic unit - Lift-off function for grinding headstock - Modern internal grinding attachment - Operating tools Extension: Table swiveling increased to 10° Optional: - Swivel angle indicator for upper table - Swivel angle indicator for workpiece headstock - Swivel angle indicator for grinding headstock - Splash guard door for Z-axis - Splash guard enclosure for X-axis etc. ADDITIONAL SERVICES: - Machine servicing - Grinding technology consulting - Operator training - Spare parts - Accessories

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Fsljuxftrohcdwwsgb Workpiece headstock swiveling: 360° Grinding head swiveling: 180° ± Grinding spindle speeds: 1500, 1700, 2200 rpm Infeed in steps: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swiveling: ±6.5° Longitudinal table travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece weight max. (between centres, including clamping): 130 kg Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guideline Including new, modern and future-proof control system. Photo shown: Example of an already delivered machine with special options -The operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original controller, so no retraining is required. -Diagnostics function with display of PLC notifications and digital I/Os -Dressing function can be expanded or modified on request. -Spindle positioning of the workpiece spindle available on request. -New maximum infeed: 40 mm, can be extended on request. -Digital readout on 2 axes. X-axis resolution: 0.5µm Options: -Encoder with digital readout on workpiece headstock -Encoder with digital readout on grinding headstock (no height adjustment possible with spindle) -New robust internal grinding device, Ø80 mm or Ø100 mm -Increase of centre height up to 225 mm -Spindle speed control for grinding spindle Included: -Operating tools -Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic longitudinal and rapid table traverse. Versatile application possibilities in production for external and internal grinding, or for external, face, and internal grinding in a single setup for individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Gauging control The machine currently does not comply with the basic health and safety requirements as specified in BetrSichV 2015. The required minimum safety target must be determined by a risk assessment according to BetrSichV.

Būklė: naudotas, Gamybos metai: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -T6: internal grinding attachment -T7: internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP control on T1 and T2 by ELASO (contactless), integrated into the control interface -GAP control on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock, hydraulic with fine adjustment +/-150 µm -Dressing device on the lower table, workpiece spindle side -Dressing device on the lower table, tailstock side -Dressing device on the upper table -New, service- and operator-friendly enclosure Fgelhcdjuxfu Nswwsb SPECIAL EQUIPMENT: Workpiece headstock with direct drive *highly recommended for non-circular grinding *max. workpiece weight, between centers: 150 kg *max. workpiece weight, overhung: 75 kg *water-cooled *Morse taper 5 combined with short taper mount to DIN 55026 *spindle orientation stop *fixed lower section B-axis with direct drive, center height 225 mm *extremely torsion-resistant *high positional accuracy *resolution ° *water-cooled MECHANICAL OVERHAUL: - Complete machine overhauled according to Kellenberger measurement protocol - New paintwork New hydraulic unit: - Improved temperature control (oil cooler) - Energy-saving: only one pump, and not running continuously! - Pressure monitoring - Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X axis - Wear-free, since no contact during operation - No loss of accuracy, even during prolonged operation under full load at maximum speed - Friction-free at low speeds - No reversal jump of friction force when changing direction - Transmits smallest rotational movements - No stick-slip effect even at low speeds - No fluctuation in friction torque due to recirculating balls - Higher axial stiffness than ball screw drives - Significantly better damping, leading to improved workpiece surface and longer tool life - No vibrations due to recirculating balls - Also suitable for high speeds and accelerations - Cost-effective alternative to linear motors, offering higher accuracy and much less heating - Much lower power loss and thus no swarf issues on permanent magnets - Much lower cooling requirements compared to linear motors ELECTRICAL OVERHAUL: -New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface -Newly constructed control cabinet -New drive technology -Replacement of all electrical wiring (Berus pressure switches etc.) -New absolute glass scales in X and Z -New absolute encoder (for B-Axis) CONTROL SYSTEM: The grinding software consists of a base license and various options, depending on the machine configuration. Software base functions: - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillation grinding - Workpiece...

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight: approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor are electrically interlocked! Internal grinding spindle can only be activated when in position. A quantum leap in safety technology. - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of grinding spindle speeds - Swivel angle display for the upper table - Swivel angle display for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid contact sensor for internal grinding - Centre height up to 250 mm possible The machine is already delivered. An identical machine can be configured with additional options. The machine tool currently does not comply with the fundamental safety and protection requirements as stipulated in the German Operational Safety Ordinance (BetrSichV) 2015. Fgslst Ii Rrshcdwwjb An increase of the required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Fslhcdwot Ii Rfewsgb Left wheel 600 mm Grinding spindle head fixed, non-rotatable. Equipped with new FAGOR control system featuring BEMA cylindrical grinding interface. With new service-friendly enclosure. Completely overhauled according to Kellenberger measurement protocol.

Būklė: geras (naudotas), Max width between forks 1200 mm Fgslhetn Rw Nocdwwjb Max diameter of workpiece 500 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, Centre distance: 2000 mm Centre height: 230 mm Maximum swing diameter: 455 mm Maximum workpiece weight between centres: 800 kg Maximum workpiece weight in cantilever (including clamping device): 200 Nm X-axis infeed movement: Electromechanical drive with ball screw X-axis infeed movement: Cross-feed speed 0.01 – 8,000 mm/min X-axis infeed movement: Set-up via electronic handwheel or direction pushbutton X-axis infeed movement: Measuring system glass scale, internal resolution 0.0005 mm Z-axis table movement: Table speed 0.01 – 10,000 mm/min Workpiece spindle motor: 3.0 kW at 0–300 rpm Workpiece spindle mount: MK5 and KK5 Control: SIEMENS 840 D solution line Operation: Conversational mode Electronic handwheel included Grinding spindle motor: 11 kW Peripheral speed of grinding wheel: 35 (50) m/s Standard grinding wheel: 600 x 80 x 203.2 mm Right-hand surface grinding wheel: 300 x 40 x 127 mm Internal grinding spindle: as per customer specification Tailstock taper: MK4 Tailstock operation: Manual (hydraulic) Tailstock foot pedal with quill stroke 40 mm and MK5 Card index/data management for workpiece data, up to 100 grinding wheels and 40 dressers Cylindricity error correction: program-supported for all dressable grinding wheels Dressing from workpiece spindle headstock or from tailstock Dressing values are compensated automatically Optional integration of diamond form rolls or swivel dresser Various dressing strategies available in the control Integrated CAD program (optional) Import of existing CAD data (optional) B-axis infinitely swivelable Fast and repeatable positioning Available grinding spindle arrangements: - External grinding wheel left - External grinding wheel left, surface grinding wheel right - External grinding wheel left, external grinding wheel right - External grinding wheel left, internal grinding spindle - External grinding wheel left, surface grinding wheel right, internal grinding spindle Production machine Can be equipped with loading gantry and in-process measurement controls Modular design / Options: - Swiveling of the B-axis manually or fully automatic, stepless - Number and arrangement of grinding spindles (external and internal) - Positionar (Z-length measuring probe) - Dressing detection - In-process measurement control - Controlled C-axis (non-circular grinding) - Hydrostatic guide in the X-axis (infeed axis) - Swivel dresser, diamond form roll - Servo-controlled tailstock with programmable pressure - Network connectivity - Data backup - Remote maintenance - Universal paper band filter - Compact air filtration unit Grinding cycles: - X-plunge grinding - Z-plunge grinding - Z-traverse grinding - Angled plunge - Multi-X plunge - Contour grinding - Angular oscillation - Positionar cycle - Non-circular machining Fgolhceynubwsdwwsb - Surface grinding - Z-peeling grinding - Auxiliary function The machine was commissioned at the end of 2012. Upgrades in 2022: Repair of the grinding table: EUR 255.40 Disassembly of tailstock: EUR 1,174.50 Disassembly of tailstock, second technician: EUR 868.50 Installation of reconditioned tailstock: EUR 1,875.00 Installation + reconditioning of tailstock: EUR 12,073.42 Total documented work: EUR 16,246.82

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, šlifavimo ilgis: 1 500 mm, šlifavimo skersmuo: 400 mm, Technical data - Grinding length [mm] - 1500 - Grinding diameter [mm] - 400 Folhcdwovga Ayowsgb - Table speed range [mm/min] - 0 - 10 - Minimum table increment [mm] - 0.001 - Tailstock sleeve taper [Morse No.] - 5 - Grinding wheel dimensions [mm] - 500x80x203 - Grinding wheel drive motor power [kW] - 11 - Workpiece drive motor power [kW] - 3.5 - Overall dimensions [mm]: Length - 6650 Width - 2300 (without control panel) Height - 1800 - Machine weight [kg] - 6900 - Centralized lubrication system; - Mitsubishi control; - Wheelhead feed – equipped with ball screw and servo motor; - Table feed – equipped with ball screw and servo motor; - Workhead – equipped with a new motor with stepless speed regulation, controlled from the operator panel; - "Electronic handwheel" allowing for precise positioning on both X and Z servo axes, e.g. for setup operations; We also manufacture machines with Siemens 828D or 840Dsl controls. Machines can be supplied for grinding lengths of 2000 / 2500 / 3000 mm.