Karšto Oro Krosnelė pirkti naudotą (12 235)

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger utility spaces such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no extended heat-up phases and can quickly warm up joinery, carpentry, or other production facilities. Solid wood and its by-products—e.g., solid wood board offcuts, chips, sawdust, pellets, or briquettes—serve as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety provisions of Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of required emission values according to the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m³/h - Firebox depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at rated load: 0.18 mbar Godpfx Absvz Hq Temeuk - Heatable room volume: approx. 1,600 m³ - Heat coverage area: approx. 300 m² - Space requirement: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue connection diameter: 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 291°C - Hot air outlet port: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connections for the air outlet are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Firebox output: 49 kW Working output: 45 kW New device, original packaging: Yes Warm air blower, flue gas fan, electronic control with digital display: included Supply air filter, recirculation intake filter: large-area supply air filter without loss of performance / included Warm air discharge pipes: 2 x 200 mm with plug-in, freely rotating 90° bends Flue diameter: 180 mm Firebox length: 660 mm Firebox width: 480 mm Firebox height: 600 mm Air handling capacity: 3,500 m³/h Supply air filter: Yes, large-area supply air filter without loss of performance Gsdpfxjpn Nyzj Abmouk Power consumption: 550 W Designed for room volume: 1,000 m³ Weight: 310 kg

Sąlyga: naujas, Heating output 30 kW Godpsvxa Itofx Abmeuk Dimensions (L/W/H) 105 cm x 60 cm x 147 cm - NEW - Kanuk Turbo 2 *new design* Warm air furnace including heat exchanger and warm air blower Nominal heat output: 30 kW Dimensions: 105 cm x 60 cm x 147 cm Heatable room volume: 1000 m³ Log length: 80 cm Efficiency: 82.4% Flue pipe connection: 150 mm Item no. 2100006

Gamybos metai: 2023, Sąlyga: naujas, For sale: New WLO 4 35 kW Warm Air Heater, Workshop Stove, Wood Stove, Industrial Hall Heater Technical Specifications of the Furnace - Rated heating output: 30.00 kW - Maximum heating output: 35.00 kW / approx. 300 m² - Included: forced axial fan, speed: 1350 rpm and capacity: 3,500 m³/h - Set includes: drive unit - Innovative air jacket design surrounds the heater fully for maximum efficiency - Indestructible furnace body made entirely from P265GH and 16Mo6 certified boiler sheets, thicknesses # 6mm and # 10mm - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 290 kg - Gross weight: 310 kg - Furnace lining: 28 refractory bricks - Removable two large cast iron grates 300 x 200 mm - Coated with certified heat-resistant paint for corrosion protection and an attractive look - Massive structure - Large combustion chamber - Large loading door - User manual included - Efficiency: 75.00% - CO emission at 13% O2: 1.20 mg/Nm³ Gujdpfx Aeixupuebmjk - Fuel type: recommended seasoned hardwood with moisture content ≤20%*, briquettes, coal only as an admixture up to 10% Safety and Certifications - CE marking: YES / on the type plate - Compliance standard: EN13240: 2006 - BimSchV Level 2: Yes Dimensions - External dimensions: Overall width: 580 mm x Overall depth: 950 mm x Overall height: 1,310 mm - Hearth dimensions: Width: 480 mm x Depth: 580 mm x Height: 560 mm - Upper door dimensions (3 mm and 4 mm sheet): Width: 390 mm x Height: 230 mm - Middle door dimensions (3 mm and 4 mm sheet): Width: 390 mm x Height: 155 mm - Bottom door dimensions (3 mm and 4 mm sheet): Width: 390 mm x Height: 150 mm - Upper loading opening dimensions: Width: 310 mm x Height: 210 mm - Loading opening dimensions middle and bottom: Width: 310 mm x Height: 130 mm - Cast iron grate dimensions: Width: 210 mm x Depth: 300 mm - Hot air outlet diameter: Ø 150 mm - Exhaust outlet diameter: Ø 150 mm - Leg height: 140 mm Technical Specifications of the Fan - Fan type: Axial blower - Material: Steel (impeller + housing) - Diameter: Ø 400 mm - Power supply: 230V / 50Hz - Motor: 4-pole - Current consumption: 0.82A - Speed: 1,350 rpm - Air flow: 3,500 m³/h - Safety: CE marking + protective grille

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm Guodpfxsvz Hq He Abmsk - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Furnace output: 34 kW Working output: 29 kW New unit, original packaging: Yes Warm air blower, flue gas fan, control unit with digital display: included Warm air ducting: 2 x 180 mm with 2 freely rotatable plugged-in bends Intake filter / supply air filter: large-area supply air filter without performance loss / included Flue outlet diameter: 160 mm Combustion chamber length: 500 mm Combustion chamber width: 400 mm Combustion chamber height: 590 mm Air delivery: 2200 m³/h Gjdpfx Abjpkwhqemeuk Power consumption: 400W Designed for room volume: 500 m³ Heating area: 100/150 m² Stove height without warm air ducts: 1560 mm Stove width: 550 mm Stove length without flue gas fan: 920 mm Weight: 200 kg

Sąlyga: naujas, - NEW - Kanuk® Original Hot Air Furnace Nominal Heat Output: 15.4 kW Dimensions: 80 x 58 x 95 cm Heatable Room Volume: 450 m³ Efficiency: 83.4 % Log Length: 48 cm Flue Connection: 160 mm Total Output (kW): 15.4 Dimensions H x W x D (cm): 80 / 58 / 95 Room Heating Capacity (m³): 450 Flue Connection (mm): 160 Flue Connection: top / rear Viewing Window (cm): 28 x 15 Efficiency (%): 83.3 Gsdovwf Rkopfx Abmeuk Weight (kg): 148 Flue Gas Temperature (°C): 216 Log Length (cm): 48 Wood Consumption (kg/h): 3.9 Flue Gas Mass Flow (g/s): 14.28 Minimum Chimney Draft (Pa): 16 Exhaust Throttle Valve: No Combustion Chamber H x W x D (cm): 40 x 44 x 49.5 Ash Pan: No Type 1 (self-closing door): Optional Airwash System: Yes Compliant with BimSchV Stage 2: Yes Suitable for Firewood, Wood Briquettes: Yes DIN EN Standard: 13240 Suitable for Lignite Briquettes: No AT §15a B-VG Standard: Yes Primary, Secondary, Tertiary Air: Yes CE Mark: Yes External Air Connection (mm): 100 LRV Switzerland: Yes No. 2100102

Gamybos metai: 2023, Sąlyga: naujas, For sale: New WLO Octagon 49.5 kW Warm Air Heater, Workshop Stove, Wood Burner, Industrial Hall Heater Thanks to its high-performance combustion chamber, the stove can accommodate logs up to 120 cm in length! Technical Specifications: - Rated heating output: 49.5 kW – approx. 450 m² - Included: Axial fan, speed: 1380 rpm, output: 5,500 m³/h - Included in delivery: Controller for SCL-1515 fan operation Gujdpfeixuq Djx Abmek - Innovative air jacket design completely encases the unit for maximum efficiency - Indestructible construction made entirely of certified boiler steel p265gh & 16M06, 6mm wall thickness - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 320 kg - Gross weight: 340 kg - Grate size: 1000 x 250 mm - Coated with certified heat-resistant paint for corrosion protection and an aesthetic finish - Robust build quality - Huge combustion chamber 120 x 80 cm! - Large loading door - User manual included - Efficiency: 75.00% - CO emission at 13% O₂: 1.20 mg/Nm³ - Fuel type: Recommended – seasoned hardwood with ≤20% moisture*, briquettes, coal only as an additive (up to 10%) Safety and Certifications: - CE marking: YES / on the nameplate - Compliance: EN13240:2006 - BimSchV Stage 2: Yes Dimensions: - External dimensions: Width: 800 mm x Depth: 1600 mm x Height: 1200 mm - Stove dimensions: Width: 800 mm x Length: 1200 mm x Height: 800 mm - Upper door (3 and 4 mm steel): Width: 520 mm x Height: 470 mm - Lower door (3 and 4 mm steel): Width: 360 mm x Height: 150 mm - Upper loading opening: Width: 460 mm x Height: 460 mm - Lower opening: Width: 360 mm x Height: 130 mm - Grate dimensions: Width: 250 mm x Depth: 1000 mm - Hot air outlet diameter: Ø 150 mm - Flue gas outlet diameter: Ø 200 mm - Leg height: 140 mm

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed for heating large utility areas, such as workshops and working spaces of trade and industrial enterprises. These hot air systems require no long heat-up phases and heat up woodworking shops, carpentries, and other production areas within a very short time. The furnaces can use solid wood and its by-products as fuel, e.g. solid wood panel residues, chips, sawdust, pellets, or briquettes. Guodsvz Hqyspfx Abmek The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and safety guideline Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of emission limits stipulated by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Flue draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirement: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85–90% - Chimney draft: 11.5 Pa - Flue gas temperature: 289°C - Hot air discharge nozzles: 2 x Ø 450 mm - For additional data, please refer to the data sheet. The two pipe fittings for outgoing hot air are located at the rear of the furnace near the bottom. For each pipe fitting, a maximum pipe length of 20 meters is allowed for air distribution. Longer lengths are optionally available upon arrangement with the manufacturer. Please contact us for more details.

Sąlyga: naujas, Gamybos metai: 2025, Furnace output: 125 kW Operational output: 99 kW Flue outlet diameter: 180 mm Warm air distribution ducts: 2 x 250 mm Furnace chamber length: 750 mm Furnace chamber width: 560 mm Furnace chamber height: 700 mm Air delivery: 6,300 m³/h Power consumption: 1,500 W Designed for room volume: 1,500 m³ Heatable area: 300/350 m² Oven height without warm air ducting: 1,980 mm Oven width: 800 mm Oven length without flue gas fan: 1,280 mm Gsdpfx Abjk Utrhomouk Weight: 415 kg

Sąlyga: naujas, - NEW - without side paneling and without base frame Kanuk® Original Hot Air Furnace - Firebox opening H x W (cm): 90 / 64 - Flue pipe connection: top / rear - Efficiency (%): 85.2 - Log length (cm): 55 - Minimum chimney draught (Pa): 16 - Ash drawer: No - BimSchV Stage 2: Yes - Lignite briquette: No - CE mark: Yes - Total output (kW): 26 - Room heating capacity (m³): 1000 - Viewing window (cm): 34.5 x 22 - Weight (kg): 193 - Wood consumption (kg/h): 6.5 - Flue gas throttle: No - Design type 1 (self-closing door): Optional - Log wood, wood briquettes: Yes - AT §15a B-VG standard: Yes - External air connection (mm): 120 mm - Dimensions H x W x D (cm): 90 / 64 / 110 - Flue pipe connection (mm): 160 - Door diameter (cm): 28 - Flue gas temperature (°C): 229 - Flue gas mass flow (g/s): 18.5 - Firebox H x W x D (cm): 50 x 55 x 55 - Glass air-wash system: Yes - DIN EN number: 13240 - Primary, secondary, tertiary air: Yes - LRV Switzerland: Yes No. 2100109 Gsdpfx Abjvwfz Asmeuk

Gamybos metai: 2023, Sąlyga: naujas, For sale: WLO 25 kW warm air heater – ideal for workshops, wood-burning stove applications, and industrial spaces. Technical Specifications of the Heater: - Nominal heating output: 25.00 kW - Maximum heating output: 30.00 kW / approx. 300 m² - Set includes: Forced axial fan (speed: 1400 rpm, capacity: 3110 m³/h) - Gear drive included - Innovative air jacket design fully encloses the unit for maximum efficiency - Extremely robust construction made entirely from certified P265GH and 16Mo6 boiler steel (6 mm and 10 mm thick) - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A, energy efficiency index: 110 - Net weight: 230 kg; gross weight: 240 kg - Firebox lined with 15 fireclay bricks - Two large removable cast iron grates (300 x 200 mm) - Coated with certified heat-resistant paint for corrosion protection and aesthetic appearance - Solid, heavy-duty build - Large combustion chamber - Large loading door - User manual included - Efficiency: 75.00 % - CO emissions at 13% O2: 1.20 mg/Nm³ - Recommended fuel: seasoned hardwood (≤20% moisture), briquettes, coal (as an additive up to 10%) Safety and Certifications: - CE mark: YES / present on type plate - Standard compliance: EN13240:2006 - BimSchV Stage 2: Yes Dimensions: - Overall dimensions: 485 mm (W) x 900 mm (D) x 1310 mm (H) - Firebox dimensions: 390 mm (W) x 460 mm (D) x 540 mm (H) - Upper door (3/4 mm steel): 390 mm (W) x 230 mm (H) - Middle door (3/4 mm steel): 390 mm (W) x 155 mm (H) - Lower door (3/4 mm steel): 390 mm (W) x 150 mm (H) - Upper loading opening: 310 mm (W) x 210 mm (H) - Middle/lower loading openings: 310 mm (W) x 130 mm (H) - Cast iron grate: 210 mm (W) x 300 mm (D) - Hot air outlet diameter: Ø 150 mm - Exhaust outlet diameter: Ø 130 mm - Leg height: 140 mm Gujdpfeixupmsx Abmjk Fan Technical Parameters: - Fan type: Axial blower - Material: Steel (fan and housing) - Diameter: Ø 350 mm - Power supply: 230V / 50Hz - Motor: 4-pole - Rated current: 0.58A - Speed: 1400 rpm - Airflow: 3110 m³/h - Safety: CE marking + safety mesh

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger functional areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems require no long heat-up phases and warm up the workshop or production hall—such as those in carpentry, joinery, or other manufacturing environments—in a very short time. Suitable fuels include solid wood and its by-products, e.g. solid wood board offcuts, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated 24 July 1996, and the safety directive of installation 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, 350) meet both emission stages required by the 1st BImSchV (Federal Emission Control Ordinance). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 Kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm Gsdpfx Aevz Hqtjbmouk - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet connectors: 2 x Ø 200 mm - For further specifications, please refer to the attached data sheet The two duct connectors for warm air outlet are located at the lower rear side of the unit. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Nominal furnace output: 350 kW Working output: 279 kW Flue outlet diameter: 200 mm Warm air duct connections: 3 x 300 mm Furnace length: 1200 mm Furnace width: 740 mm Furnace height: 1040 mm Air delivery rate: 17,800 m³/h Warm air blower power consumption: 3 kW Flue gas fan power consumption: 600 W Designed for room volume: 5,000 m³ Heatable area: 1,000 m² Furnace height without warm air ducts: 2,500 mm Godpfx Abek Utrtsmjuk Furnace width: 1,100 mm Furnace length without flue gas fan: 1,900 mm Weight: 850 kg

Gamybos metai: 2024, Sąlyga: naujas, For sale: New WLO - 15 kW warm air furnace, workshop stove, wood stove Technical Specifications of the Furnace Rated heating output: 12.00 kW Maximum heating output: 15.00 kW / approx. 150 m² Supplied with: Forced axial fan, speed: 1400 rpm, capacity: 1460 m³/h Innovative air jacket design, fully enclosing the furnace for maximum efficiency Extremely robust furnace made entirely from certified P265GH and 16Mo6 boiler plates, thicknesses #6mm and #10mm Large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 80 kg Gross weight: 100 kg Replaceable large cast iron grate Coated with certified heat-resistant paint for corrosion protection and an attractive appearance Solid structure Large combustion chamber Large loading door User manual included Efficiency: 75.00% CO emissions at 13% O₂: 1.20 mg/Nm³ Fuel type: recommended seasoned hardwood with a moisture content of ≤20%, briquettes, coal permitted as additive up to 10% Safety and Certifications CE marking: YES / present on the nameplate Conforms to standard: EN13240:2006 BimSchV Stage 2: Yes Technical Specifications of the Fan Type of fan: Axial blower Material: Steel (propeller + housing) Diameter: Ø 250 mm Power supply: 230 V / 50 Hz Motor: 4 poles Current consumption: 0.30 A Speed: 1400 rpm Air flow: 1460 m³/h Guodpfxeixul Hj Abmok Safety: CE mark + protective grille

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed to heat larger usable spaces such as production halls and work areas in trade and industrial facilities. These hot air systems require no lengthy heat-up phases and can quickly warm up carpentry or joinery workshops as well as other manufacturing sites. Fuel types include solid wood and its by-products, such as remnants of solid wood boards, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety directive of Equipment 89/392/CE. All MARTINA series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission threshold stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air mode - Thermal output: 29.8 kW - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox underpressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 600 m³ Godpfovz Hqmjx Abmouk - Heatable surface area: approx. 120 m² - Footprint: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue outlet diameter (collar): 160 mm - Chimney diameter (reference value): 200 mm - Efficiency: 85–90% - Chimney draft: 11 Pa - Exhaust gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet The two pipe collars for the outgoing hot air are located on the rear side of the furnace in the lower section. A maximum pipe length of 20 metres is permitted per collar for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Firebox output: 510 kW Working output: 407 kW New device, original packaging: Yes Flue outlet diameter: 250 mm Warm air supply ducts: 4 x 350 mm Firebox length: 1900 mm Firebox width: 900 mm Firebox height: 900 mm Air delivery: 26,000 m³/h Power consumption: 4,500 W Designed for room volume: 8,000 m³ Gusdpfjk Utrwsx Abmsk Area to be heated: 1,800 m² Oven height without warm air ducts: 3,000 mm Oven width: 1,220 mm Oven length without flue gas fan: 2,700 mm Weight: 1,575 kg

Gamybos metai: 2024, Sąlyga: naujas, For sale: New WLO 50 kW Warm Air Heater, Workshop Stove, Wood Burner Technical Specifications of the Heater: - Rated heating output: 44.50 kW - Maximum heating output: 50.00 kW / suitable for approx. 300 m² - Included: Axial fan, speed: 1350 rpm, capacity: 5060 m³/h - Supplied with: Operator’s manual - Innovative air jacket design completely encloses the stove for maximum efficiency - Robust construction: made entirely from P265GH and 16Mo3 certified boiler plates, thicknesses #6 mm and #10 mm - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 330 kg - Gross weight: 340 kg - Fire chamber lining: 40 fireclay bricks - Two removable large cast iron grates: 300 x 200 mm - Coated with certified heat-resistant paint for corrosion protection and enhanced appearance - Solid structure - Large combustion chamber - Wide loading door - User manual included - Efficiency: 75.00% - CO emissions at 13% O₂: 1.20 m - Recommended fuel: Seasoned hardwood with moisture content ≤20% * mg/Nm³, briquettes; coal only as an additive up to 10% Safety and Certification: - CE marking: YES / indicated on the nameplate - Standard compliance: EN13240:2006 - Meets BImSchV Stage 2: Yes Dimensions: - External dimensions: Total width: 580 mm x total depth: 1290 mm x total height: 1310 mm - Firebox dimensions: Width: 480 mm x depth: 930 mm x height: 680 mm - Upper door (3 and 4 mm plate): Width: 390 mm x height: 330 mm - Middle door (3 and 4 mm plate): Width: 390 mm x height: 150 mm - Lower door (3 and 4 mm plate): Width: 390 mm x height: 150 mm - Top loading opening: Width: 315 mm x height: 310 mm - Middle/lower loading opening: Width: 315 mm x height: 130 mm - Cast iron grate: Width: 210 mm x depth: 300 mm - Hot air outlet diameter: Ø 150 mm Gusdpfeixup Asx Abmek - Exhaust outlet diameter: Ø 150 mm - Leg height: 140 mm Fan Technical Data: - Type: Axial fan - Material: Steel (impeller + housing) - Diameter: Ø 450 mm - Power supply: 230V / 50Hz - Motor: 4-pole - Current consumption: 0.82 A - Speed: 1350 rpm - Airflow: 5060 m³/h - Safety: CE marking + protective mesh

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total connected load: 2 kW Hot Air Furnace MARTINA 240 Guodpfjvz Hqgex Abmok The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and craft businesses. They are designed for heating large usable spaces such as workshops and production areas in craft or industrial enterprises. These hot air systems do not require long heating-up phases and are capable of rapidly warming up joinery and carpentry workshops or other production facilities. The units can burn solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 - Fuel consumption: 50 kg/h - Airflow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air fan: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Nominal output draft requirement: 0.18 mbar - Heatable volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space required: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90 % - Chimney fan pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet connections: 2 x Ø 450 mm - Further data available in the attached data sheet The two duct connections for outgoing hot air are located on the lower rear side of the unit. A maximum of 20 meters of duct per outlet is allowed for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Furnace output: 34 kW Working output: 29 kW New device: yes, originally packaged Warm air blower, flue gas fan, control unit with digital display: included Warm air ducting pipes: 2 x 180 mm with freely rotatable plug-in 90° bends Flue outlet diameter: 160 mm Combustion chamber length: 500 mm Combustion chamber width: 400 mm Combustion chamber height: 590 mm Air conveyance: 2200 m³/h Power consumption: 400 W Designed for room volume: 500 m³ Heatable area: 100/150 m² Guedpfjk Utraex Abmjk Stove height without warm air ducting pipes: 1560 mm Stove width: 550 mm Stove length without flue gas fan: 920 mm Weight: 190 kg

Gamybos metai: 2024, Sąlyga: naujas, For sale: WLO 20 kW warm air furnace / workshop stove / wood-burning stove / hall stove Technical specifications: - Nominal heat output: 20.00 kW - Maximum heat output: 23.00 kW / approx. 230 m² - Included: axial fan, speed: 1380 rpm, capacity: 2910 m³/h - Included: driver - Innovative air jacket design fully surrounds the stove for maximum efficiency - Indestructible firebox made from 5 mm thick boiler plate steel - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 160 kg - Gross weight: 180 kg - Stove lining: 12 fireclay bricks - Large, replaceable cast iron grate - Coated with certified heat-resistant paint for corrosion protection and an attractive appearance - Robust construction - Large combustion chamber - Large loading door Gusdpjixun Tofx Abmsk - User manual included - Efficiency: 75.00% - CO emission at 13% O2: 1.20 mg/Nm³ - Recommended fuel: seasoned hardwood with moisture content ≤20%, briquettes, coal as an additive only up to 10% Safety and certifications: - CE mark: YES / located on the nameplate - Conforms to standard: EN13240:2006 - BimSchV Stage 2: Yes Dimensions: - External dimensions: total width 485 mm x total depth 790 mm x total height 1030 mm - Stove dimensions: width 380 mm x depth 450 mm x height 500 mm - Upper door dimensions (sheet 3 and 4 mm): width 365 mm x height 215 mm - Lower door dimensions (3 and 4 mm sheet): width 365 mm x height 295 mm - Upper loading opening: width 285 mm x height 195 mm - Lower loading opening: width 285 mm x height 265 mm - Cast iron grate dimensions: width 210 mm x depth 300 mm - Hot air outlet diameter: Ø 120 mm - Exhaust outlet diameter: Ø 130 mm - Leg height: 140 mm Fan technical specifications: - Fan type: axial blower - Material: steel (propeller + housing) - Diameter: Ø 300 mm - Power supply: 230V / 50Hz - Motor: 4-pole - Current consumption: 0.30A - Speed: 1380 rpm - Airflow: 2910 m³/h - Safety: CE marking + protective grid

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Warm Air Furnace MARTINA 120 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger areas, such as workshops and production halls in both craft and industrial operations. These warm air systems require no lengthy preheating times and are capable of warming up joinery or carpentry workshops and other production facilities in a very short period. The furnace can be fueled with solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline of Directive 89/392/EEC. All warm air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) fulfill both stages of the emission limits required by the 1st Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air performance: 9,000 m³/h Guodsvz Hhxepfx Abmok - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Warm air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Flue draught at nominal load: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Required space: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Chimney diameter (recommendation): 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Warm air outlet nozzles: 2 x Ø 220 mm - For further data, please refer to the enclosed data sheet The two pipe connectors for outgoing warm air are located at the rear bottom side of the furnace. A maximum pipe length of 20 meters per nozzle is permitted for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Firebox output: 49 kW Operating output: 45 kW New device, original packaging: yes Gujdpfx Abek Utrdemok Warm air blower, flue gas fan, control unit with digital display: included Warm air distribution ducts: 2 x 200 mm with freely rotatable slip-on bends Flue outlet diameter: 180 mm Firebox length: 660 mm Firebox width: 480 mm Firebox height: 600 mm Air delivery: 3,500 m³/h Power consumption: 550 W Designed for room volume: 1,000 m³ Heatable area: 200/250 m² Oven height without warm air ducts: 1,750 mm Oven width: 700 mm Oven length without flue gas fan: 1,150 mm Weight: 305 kg

Sąlyga: naujas, Gamybos metai: 2025, Furnace output: 175 kW Operating output: 140 kW Flue diameter: 200 mm Warm air supply ducts: 1 x 500 mm Combustion chamber length: 950 mm Guedsi Hplropfx Abmjk Combustion chamber width: 600 mm Combustion chamber height: 860 mm Air delivery: 8,900 m³/h Power consumption: 3,500 W Designed for room volume: 3,000 m³ Area to be heated: 500/600 m² Stove height without warm air supply ducts: 2,200 mm Stove width: 930 mm Stove length without flue gas fan: 1,700 mm Weight: 615 kg

Sąlyga: naujas, Gamybos metai: 2024, Firebox output: 175 kW Working output: 140 kW Flue diameter: 200 mm Hot air supply ducts: 3 x 250 mm Guodpfxok Utrpo Abmjk Firebox length: 950 mm Firebox width: 600 mm Firebox height: 860 mm Air delivery: 8,900 m³/h Power consumption: 3,500 W Designed for room volume: 3,000 m³ Heatable area: 500/600 m² Stove height without hot air ducts: 2,200 mm Stove width: 930 mm Stove length without flue gas fan: 1,700 mm Weight: 615 kg