Karšto oro krosnelė

Compactsystem MARTINA 85

Sąlyga: beveik kaip naujas (naudotas), Rezervuare orizontale din oțel carbon, capacitate 73.000 l. Dimensiuni: 3 x 11 m. Grosime cilindru: 8 mm. Grosime fund: 12 mm. Dotate cu scară de acces. Gbsdpfoibh S Hjx Abdsg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Gas burner WEISHAUPT WM - G30 - 3800 kW, with gas train Output: 400-3800 kW Gjdpewg Hdiefx Abdjbg Version: ZM-LN Year of manufacture: 2016

Sąlyga: naudotas, ALREADY DISMANTLED ‼️ AVAILABLE IMMEDIATELY FOR DELIVERY ‼️ 🔥 Multiple Fröling Turbomatic (TMC) wood chip boilers for sale – available in 35 / 48 / 55 / 110 kW outputs! 🔥 High-quality, automated Fröling TMC series biomass boilers for sale in various capacities. Ideal for use from private households to smaller industrial facilities where reliable and cost-effective heating is essential. — Available models: • Fröling TMC 35 kW – for smaller systems • Fröling TMC 48 kW – for medium heat demands • Fröling TMC 55 kW – for larger workshops, farms • Fröling TMC 110 kW – for industrial/agricultural systems — Features: 🌲 Fuel types: wood chips, pellets, wood shavings 🔁 Fully automatic operation: feeding, cleaning, ash removal 🧠 Advanced combustion control, intelligent management system ♻️ High efficiency, low emissions 🇦🇹 Fröling – premium Austrian biomass technology 💥💰 Price varies by model – contact us by phone or email for details! 💰💥 Gbedpfx Abewakktsdjg 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — 💼 Top Heating Systems – ProfiKazán Wide range of used Fröling boilers with expert support.

Sąlyga: naudotas, New diesel generator set, generator, emergency power unit RTE Model 50kVA – identical to DAEWOO DAGFS 50 New, unused, year of manufacture 2025 Rated power 50 kVA Continuous power max. 40 kVA Standby power 55 kVA / 44 kW Rated current 33 amps Voltage 400/230 volts, 50 Hz / 230 volts, 50 Hz Fuel consumption 99-liter tank capacity for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load approx. 11 liters/hour Fuel consumption in standby approx. 4 liters/hour Drive engine 4-cylinder in-line diesel engine RICARDO ZH4105ZD Engine output at 1500 rpm: 45 kW Engine output at 1800 rpm: 55 kW Displacement 1500 cc Tank capacity 99 liters - Simple and compact design with sound-insulated metal enclosure - Forklift pockets for easy and safe transport by forklift - 3x CEE 16 amp sockets (3-pin, 230 V) Gjdpfx Asxlkq Ujbdobg - 1x CEE 16 amp socket (5-pin, 400 V) - Terminal strip for cable connection for external consumers, e.g., construction site power distributors - ATS module for mains backup operation, for automatic emergency power switching in the event of a power failure Space requirements L x W x H: 2150 x 950 x 1200 mm Weight: 900 kg Unopened stock machine

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Viessmann Paromat-Triplex Output: 225 kW Installed in a container. Inspection only by prior telephone arrangement! Preferred sale to dealers, commercial operators, or for export. All information provided without guarantee; subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. Of course, we can also take care of all formalities. Gbsdjt Iuyfopfx Abdeg Loading possible.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Gbodovz Hq Hspfx Abdeg Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Sąlyga: labai geros būklės (naudotas), Low-temperature boiler, Buderus SB615, output 510 kW, 120°C, 5.5 bar, suitable for gas or oil burners. Gjdpfsqww Icox Abdsbg

Sąlyga: labai geros būklės (naudotas), tekėjimo ilgis: 5 500 mm, Manufacturer: WEIPERT Model: W1400 Gedpfx Abswzhzljdebg Control: R&D MTC3 Turning length: 5500 mm Swing over bed Ø: 1400 mm Swing over cross slide: 960 mm Length: 9000 mm Width: 2900 mm Height: 2900 mm Weight: 32,000 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 19 000 h, Funkcionalumas: visiškai funkcionalus, Gabler M92L Thermoformmaschine, in ausgezeichnetem Betriebszustand. Gsdjwcdvnspfx Abdjbg

Sąlyga: naudotas, mašinos/transporto priemonės numeris: YV2RT60FXKA84xxxx, rida: 5 874 km, Gamybos metai: 2021, Please contact ATS Norway for further information. Please quote reference number on enquiry: 20511 Specifications: - Model Year: 2021 - 5,874 km (mileage increasing slightly) - EU approval valid until: 21.02.26 - Euro 6 engine - 8x2 configuration - 551 HP - Suspension on first and second axle: steel - Suspension on third and fourth axle: air - 2 x 110-litre variable displacement pumps - 2 x manual extensions for main boom, 2 x for auxiliary boom - Optical remote control by Scanreco (top model) - Load cell on main boom - Additional function for main boom and auxiliary boom - Automatic leveling (Vehicle self-levels horizontally and is immediately ready for lifting.) - Virtual workspace (Ability to limit all axles with just a few button presses, no workshop required. Ideal for work under high voltage, etc.) Gbedpfswphixsx Abdog - SKF centralized lubrication up to the first section - Auxiliary function up to very top of the boom - Single winch hook (jib / main boom) - 2 sheave winch hooks (boom / main boom) - 4-point winch hook (main boom) - Hook for jib - Hook for main boom (large hook) - Option to lower generator (24 volts) - Cable end sensor and sleeve - 4-tonne winch - Diagnostic cable for online support (remote assistance) - Danfoss valve center - 2 x 2-tonne counterweight (M is only required for cranes above the cab – otherwise, counterweights are not needed and can be removed if desired) - Front stabilizer leg Superstructure: - 4 x work lights, strategically placed in each crane locker - 50" LED work light at rear of cab - Powerful LED lighting in crane - VBG coupling with air servo control unit mounted left side, rear locker - Roof rack - 2 LED high beam bars at the front of the roof (daylight!!) - Amber LED work warning bar on the roof - EasyUp folding ladder with side railing - Chain signage boxes etc. mounted on the rear stabilizer legs, extend/retract with the legs, can also be stored during transit - Control charger in the cab - Plastic inner fenders on axles 3 and 4 - Triangular pull-out locker between axles 3 and 4 - Large locker with 500 W fan heater for hanging/drying clothes, etc., left side between axles 2 and 3 - Flat/lower closed rear with alloy door panels, custom-cut for a perfect vehicle fit, rounded edges for a professional appearance - CNC manufactured panels at rear of cab - Sides, cab, and rear fully painted - Crane rest for operation without boom - 5 outrigger pads (4 x 80x80x6 cm in designated cradles at rear of platform) - Large locker right side, 1.2 x 1 metres - Powerful LED reversing/work lights - Vehicle rear modified with CNC-manufactured panels, several integrated, stylish LED rear lights - Strategically placed access hatches to relevant components underneath the superstructure - Precisely cut...