Karšto oro krosnelė

Compactsystem MARTINA 350

Dimensions (L x W x H): 1700 x 2000 x 2550 mm
Weight: 1400 kg
Total power requirement: 4.5 kW
Hot Air Furnace MARTINA 350

The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating larger commercial areas, such as factory halls and workspaces in both commercial and industrial sectors. These hot air systems do not require long heat-up times and can warm the production area—like joiner's or carpenter's shops as well as other facilities—within a very short period.

Fuel types include solid wood and its by-products, e.g. offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes.

The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 1996, and the plant safety directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) satisfy both emission stages as required by the 1st German Federal Emission Control Ordinance (BImSchV).

- Automatic and continuous operation modes
- Thermal output: 390 kW
- Thermal output (Kcal): 335,000
- Fuel consumption: 85 kg/h
- Air output: 20,000 m³/h
- Combustion chamber depth: 1400 mm
- Feed door: 500 x 700 mm
- Hot air fan: 4.48 kW
- Combustion chamber vacuum: 0.2–0.3 mbar
- Draft requirement at nominal output: 0.18 mbar
- Heatable volume: approx. 7,500 m³
- Heatable area: approx. 1,600 m²
Dwsdpfx Afevz Hqys Hjc
- Space requirement: Width 1700 mm, Depth 2000 mm, Height 2550 mm
- Weight: 1400 kg
- Flue outlet diameter: 300 mm
- Recommended chimney diameter: 350 mm
- Efficiency: 85–90%
- Chimney draft: 11.5 Pa
- Exhaust temperature: 289 °C
- Hot air outlet connectors: 2 x Ø 450 mm
- For further specifications please refer to the attached data sheet

The two pipe connectors for hot air exhaust are located at the rear of the furnace, near the bottom. Each connector allows for a maximum ducting length of 20 meters for air distribution. Greater lengths are possible in consultation with the manufacturer. Please contact us for further information.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.