Elektriniai infraraudonųjų spindulių radiatoriai

Rex Nordic Airrex AH 720

Būklė: labai geros būklės (naudotas), Gamybos metai: 1982, ULMIA 1710s Table Saw Year of manufacture: 1982 Tilt angle: 45° Cutting length on sliding table: 750 mm Max. saw blade diameter: 250 mm Cutting height: 75 mm Cutting width between saw blade and fence: 650 mm Sliding table with angle cutting scale Kodpfxoufgnze Aaujlr Table size: 1000 x 630 mm

Gamybos metai: 1999, būklė: paruoštas naudoti (naudotas), Volume: 1000 L, max. temperature: 750°C, heating capacity: 40 kW, machine dimensions (L/W/H): approx. 2500 mm / 1600 mm / 1900 mm, weight: approx. 2000 kg. Documentation available. On-site inspection possible. Expected to be available from October/November 2025. Kedpfx Aew Emyzoauolr

Būklė: naujas, Column Drilling Machine Bernardo BM 32 SB Maximum drilling capacity: 32 mm Drill chuck: 1 – 16 mm / B 18 Morse taper: MK 4 Spindle speed: (12) 150 – 2450 rpm Throat depth: 255 mm Swiveling drill table: 360° Maximum distance spindle / table: 750 mm Distance spindle / base plate: 1210 mm Kjdpsd Tcchefx Aauelr Quill stroke: 120 mm Column diameter: 92 mm Table size / T-slot size: 385 x 335 mm / 14 mm Base plate working area: 380 x 335 mm Motor output (S1 100%): 1.1 kW / 400 V Motor input (S6 40%): 1.6 kW / 400 V Machine dimensions (W x D x H): 450 x 800 x 1730 mm

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Suitable for use in workshops, warehouses (frost protection), greenhouses, barns, conservatories, and camping awnings. Ready for immediate use – simply plug in and switch on. Clean combustion – no chimney required. Highly economical – fuel consumption approx. 2 litres per day. App-controlled – set temperature, receive notifications, and monitor fuel level directly on your smartphone. Thermostat for automatic operation, adjustable range 0–40°C. Dry heat – no condensation as with gas heaters. Mobile use thanks to four swivel castors. Operates on biodiesel or diesel/red diesel. Low noise – only 48 dB. No dust – no fan required. Kledpfx Aasqvlw Ieuor No exhaust gases – does not emit any burning smell. Complies with the latest EU emission directive. Automatic restart after power failure.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, steplessly adjustable Saw blade height adjustment: electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. Among other things, the following components have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to servo-controlled pusher - New electrical components - New pneumatic lines - New pneumatic components - Retrofit to valve manifold - Optimized extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishing of the enclosure In addition, the machine features: - Minimum quantity lubrication - Splitter extension (for high-quality cut surfaces without drag marks) - Loading magazine for gentle handling of painted/anodized surfaces - Scrap piece ejection in the pusher - Foldable scrap piece tray Options: - Magazine width: 3,000 mm - Pusher length: 6,000 mm Ksdpfxeuiy Nge Aauslr - Pusher length: 8,000 mm - Reinforced motor: 5.5 kW - Multiple clamping device for parallel sawing of several workpieces - Online support connection - Delivery and installation at your site - Training for your staff

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger utility spaces such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no extended heat-up phases and can quickly warm up joinery, carpentry, or other production facilities. Solid wood and its by-products—e.g., solid wood board offcuts, chips, sawdust, pellets, or briquettes—serve as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety provisions of Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of required emission values according to the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m³/h Ksdpfsvz Hq Tex Aauolr - Firebox depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at rated load: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heat coverage area: approx. 300 m² - Space requirement: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue connection diameter: 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 291°C - Hot air outlet port: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connections for the air outlet are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Būklė: beveik kaip naujas (naudotas), Arbeitsbreite 1350 mm Kjdpfx Ajuuitgsaujlr Die Maschine befindet sich, wie auf den Bildern zu sehen, in einem ausgezeichneten, neuwertigen Zustand.

Gamybos metai: 1985, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: (20020324 EG) - VK-RES, DEMAG KBK Crane Ceiling Crane Runway with Approx. Dimensions 16.5x7m (7m Bridge – Double Girder Crane) Load Capacity / Lifting Capacity: 500 KG – 0.5t Technical Data of the System: Crane runway made of Demag KBK2 rails. System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable festoon system, brackets/suspension, etc. Including Demag PK2 500KG chain hoist – lifting height approx. 4.5m Crane is dismantled and immediately available. Used condition, see photos. Item location: 75053 Gondelsheim Shipping by freight carrier or collection strictly by prior arrangement. Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacities from 125KG to 1600KG. Please inquire about your crane runway with required capacity and dimensions without obligation. Kljdpfxjty S I Es Aauor

Būklė: naujas, Gamybos metai: 2026, The drill, thanks to its rigid construction, ensures perfect drilling quality. The tilting table allows for a wide range of machining operations. The unit is equipped with an electronic speed indicator, drilling depth gauge, and a movable head. A 125 mm vise is included in the set. The model features stepless spindle speed adjustment. Machine description Kjdpfx Aswnca Ajaujlr - Stepless spindle speed adjustment - LED working lamp - Work table and base equipped with T-slots - Solid, torsion-resistant column - Tilting work table in the range of -45° to +45° - Drilling depth stop with scale Technical specifications Maximum drilling diameter: 25 mm Maximum chuck capacity: 16 mm Distance spindle axis to column: 215 mm Spindle taper: MT3 Spindle travel: 150 mm Column diameter: 80 mm Motor: 230 V / 50 Hz / 1100 W Transmission: YES Base dimensions: 580 x 415 mm Table dimensions: 356 x 356 mm Overall height: 1710 mm Spindle speed range (50 Hz): 180–2000 rpm Table travel range: 600 mm Packed dimensions (L/W/H): 1510 x 690 x 256 mm Weight: 95 kg

Būklė: naudotas, incl. various slot and tenon discs used, good condition Brand: Festo Type: ZA 101 Machine No.: 2668/S Number of spindles: 3 + cut-off saw Clamping height: 1 x 140 mm + 2 x 30 mm Cut-off saw: 2.5 HP Stop rule LAS 1750 mm + 1000 mm with turret stop Workpiece clamping: pneumatic Space required: approx. 1700 mm x 700 mm x 1400 mm Kodpfx Aaovwffzjuolr Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition, as inspected without guarantee or warranty