Karšto oro krosnelė, dirbtuvių krosnelė, medžio krosnelė

WLO 1 15 KW

Gamybos metai: 2024, Sąlyga: naujas, For sale: WLO 20 kW warm air furnace / workshop stove / wood-burning stove / hall stove Technical specifications: - Nominal heat output: 20.00 kW - Maximum heat output: 23.00 kW / approx. 230 m² - Included: axial fan, speed: 1380 rpm, capacity: 2910 m³/h - Included: driver - Innovative air jacket design fully surrounds the stove for maximum efficiency Nodsixun Topfx Aghowp - Indestructible firebox made from 5 mm thick boiler plate steel - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 160 kg - Gross weight: 180 kg - Stove lining: 12 fireclay bricks - Large, replaceable cast iron grate - Coated with certified heat-resistant paint for corrosion protection and an attractive appearance - Robust construction - Large combustion chamber - Large loading door - User manual included - Efficiency: 75.00% - CO emission at 13% O2: 1.20 mg/Nm³ - Recommended fuel: seasoned hardwood with moisture content ≤20%, briquettes, coal as an additive only up to 10% Safety and certifications: - CE mark: YES / located on the nameplate - Conforms to standard: EN13240:2006 - BimSchV Stage 2: Yes Dimensions: - External dimensions: total width 485 mm x total depth 790 mm x total height 1030 mm - Stove dimensions: width 380 mm x depth 450 mm x height 500 mm - Upper door dimensions (sheet 3 and 4 mm): width 365 mm x height 215 mm - Lower door dimensions (3 and 4 mm sheet): width 365 mm x height 295 mm - Upper loading opening: width 285 mm x height 195 mm - Lower loading opening: width 285 mm x height 265 mm - Cast iron grate dimensions: width 210 mm x depth 300 mm - Hot air outlet diameter: Ø 120 mm - Exhaust outlet diameter: Ø 130 mm - Leg height: 140 mm Fan technical specifications: - Fan type: axial blower - Material: steel (propeller + housing) - Diameter: Ø 300 mm - Power supply: 230V / 50Hz - Motor: 4-pole - Current consumption: 0.30A - Speed: 1380 rpm - Airflow: 2910 m³/h - Safety: CE marking + protective grid

Sąlyga: naujas, Gamybos metai: 2025, Heating output / Nominal heat output: 21 kW For rooms up to approx. 300 to 500 m³ (according to DIN 4108) Nodpshvibzjfx Aghjwp Flue outlet: rear (standard) Flue pipe: Ø 180 mm Filling chamber volume: 80 l Required chimney draft: min. 12 Pa Filling opening dimensions (L x W): 300 x 340 mm Weight: 375 kg Efficiency: 88.2% Energy efficiency class: A+ The EWI-A 15G room heaters are type-approved according to DIN EN 13240, 15a B-VG (Austria), and LRV (Switzerland). They comply with the limits of the 1st BImSchV (Federal Emission Control Ordinance).

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 1 350 mm, įrengimo aukštis: 130 mm, bendras ilgis: 800 mm, bendras plotis: 950 mm, bendras svoris: 560 kg, galia: 0,8 kW (1,09 AG), Hydraulic punching / cutting press with swing arm, pressing force 16 tons, stroke 90 mm, throat depth 560 mm, table size 800x400 mm, motor 0.8 kW, die dimensions 460x350 mm, thickness of plastic pad 50 mm, overall dimensions 800x900x1350 mm, weight approx. 560 kg. Nodpeu R Nx Njfx Aghewp

Sąlyga: naujas, Gamybos metai: 2023, Oscillating sanders are designed for sanding straight, curved, and shaped pieces with round or oval cross-sections, etc., and with variable thicknesses, suitable for chairs, tables, beds, and related items. The main features of the machine are: frame made of electro-welded steel; rotating disc with two counter-rotating sanding belts driven by an electric motor, with rotational movement around the workpiece; electric control panel; two adjustable workbenches (infeed – outfeed); possibility of fitting two automatic workpiece feed units with adjustable speed via inverter. Njdpsqnufvefx Aghewp Sanding belts: 80 x 1260 mm Minimum / Maximum workpiece diameter: 10–100 mm (ø) Minimum bending radius: 200 mm Dimensions: 760 x 1000 x 1800 mm 3 units Camam, Comec, OMEF, Brusa di Garboli

Sąlyga: naujas, GEKO Generator 9000 ED–S/SEBA RSS cube Note: Current delivery time approximately 6–9 months from order placement – subject to change Features: Njdpfsgy Hazox Aghjwp Standard 12V DC socket for connecting 12V consumers, high-performance synchronous generator for high inrush currents, carrying handles. 1 three-phase CEE socket (16A), 2 safety sockets (16A). Optional with IT/TN network switching. Generator Synchronous electrical output: 3~ cos φ 0.8 9000 VA electrical output: 1~ cos φ 0.8 5000 VA Voltage 3~ 400 V Voltage 1~ 230 V Current 3~ 13 A Current 1~ (CEE) 21 A Current 1~ (Schuko) 16 A Frequency 50 Hz Generator protection rating IP 54 Engine type: B&S Number of cylinders: 2 Speed: 3000 rpm Fuel type: Petrol Engine oil capacity: 1.7 l Engine power: 10.6 kW Cooling (engine/generator): air/air Tank capacity: 14.9 l Operating time: Full load / Half load 3.8 / 5.7 h Weight (ready for operation, incl. battery): 134 kg Dimensions L x W x H: 700 x 440 x 580 mm Sound power level LWA: 93 dB(A)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9673240, šlifavimo plotis: 1 100 mm, galia: 15 kW (20,39 AG), aukščio reguliavimo tipas: elektrinis, šlifavimo juostos ilgis: 1 900 mm, suslėgto oro jungtis: 6 juosta, šlifavimo juostos plotis: 1 120 mm, Combination sanding unit with contact roller and air sanding pad Brush roller Sanding belt tension pneumatic, motorized thickness adjustment Technical specifications: Max. working width: 1100 mm Max. workpiece thickness: 150 mm Nwedjtppzvopfx Aghjp Min. workpiece thickness: 3 mm Sanding belt size: 1900 x 1120 mm Feed speed: 5/10 m/min Sanding unit motor power: 15 kW Height adjustment motor power: 0.50 kW Feed conveyor motor power: 0.5/1.0 kW Operating pressure: 6 bar Air consumption: approx. 20 l/min Extraction port: 2 x 200 mm Weight: approx. 2100 kg Machine width: approx. 1750 mm Machine depth: approx. 1700 mm Machine height: approx. 1900 mm

Sąlyga: naudotas, Gamybos metai: 1984, Naudota mašina Metai: 1984 Mašina bus pilnai perrinkta Įranga ir techniniai duomenys: Stalo dydis: 1100 x 880 mm Variklis su poline jungtimi: 5/6 kW Veleno apsukos: 3000/4500/6000/9000 aps./min. Rankinis aukščio reguliavimas: per rankenėlę Rankinis posvyrio reguliavimas: per rankenėlę Frezavimo veleno aukščio reguliavimas: 110 mm Frezavimo veleno posvyrio reguliavimas: -5° iki 45°, su dviguba atrama Perjungiklis dešininei ir kairinei eigai Su 3 ritinėlių padavimo įrenginiu Nwsdpewka Sbsfx Aghjp Nuotraukose rodoma mašina neatrestauruota, parduodama be nuotraukose matomų Aigner stalo prailginimų Prieinamumas: pagal susitarimą Sandėliavimo vieta: Flörsheim

Gamybos metai: 2023, Sąlyga: naujas, For sale: New WLO 4 35 kW Warm Air Heater, Workshop Stove, Wood Stove, Industrial Hall Heater Technical Specifications of the Furnace - Rated heating output: 30.00 kW - Maximum heating output: 35.00 kW / approx. 300 m² - Included: forced axial fan, speed: 1350 rpm and capacity: 3,500 m³/h - Set includes: drive unit - Innovative air jacket design surrounds the heater fully for maximum efficiency - Indestructible furnace body made entirely from P265GH and 16Mo6 certified boiler sheets, thicknesses # 6mm and # 10mm - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 290 kg - Gross weight: 310 kg - Furnace lining: 28 refractory bricks - Removable two large cast iron grates 300 x 200 mm - Coated with certified heat-resistant paint for corrosion protection and an attractive look - Massive structure - Large combustion chamber - Large loading door - User manual included - Efficiency: 75.00% - CO emission at 13% O2: 1.20 mg/Nm³ - Fuel type: recommended seasoned hardwood with moisture content ≤20%*, briquettes, coal only as an admixture up to 10% Safety and Certifications - CE marking: YES / on the type plate - Compliance standard: EN13240: 2006 - BimSchV Level 2: Yes Dimensions - External dimensions: Overall width: 580 mm x Overall depth: 950 mm x Overall height: 1,310 mm - Hearth dimensions: Width: 480 mm x Depth: 580 mm x Height: 560 mm - Upper door dimensions (3 mm and 4 mm sheet): Width: 390 mm x Height: 230 mm - Middle door dimensions (3 mm and 4 mm sheet): Width: 390 mm x Height: 155 mm - Bottom door dimensions (3 mm and 4 mm sheet): Width: 390 mm x Height: 150 mm - Upper loading opening dimensions: Width: 310 mm x Height: 210 mm - Loading opening dimensions middle and bottom: Width: 310 mm x Height: 130 mm - Cast iron grate dimensions: Width: 210 mm x Depth: 300 mm - Hot air outlet diameter: Ø 150 mm - Exhaust outlet diameter: Ø 150 mm - Leg height: 140 mm Technical Specifications of the Fan - Fan type: Axial blower - Material: Steel (impeller + housing) - Diameter: Ø 400 mm - Power supply: 230V / 50Hz - Motor: 4-pole - Current consumption: 0.82A - Speed: 1,350 rpm Nwodpfx Aoixupuoghsp - Air flow: 3,500 m³/h - Safety: CE marking + protective grille

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 100 mm, Item no. 2679, year of manufacture 1991. Technical data: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm, sanding belt dimensions: 2150 x 1120 mm, belt speed: 18 m/sec., feed speeds: 4 + 8 m/min., main sanding unit motor power: 11 kW, thickness adjustment: 0.55 kW, feed conveyor: 1.3/1.8 kW, operating pressure: 6 bar, air consumption: 10 l/min., extraction outlets: 1 x 150 + 1 x 120 mm, WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg. Nwjdpfx Agetppz Ijhep Standard equipment: - Contact roller, D=150 mm, hardness 90° Shore - Air sanding shoe with automatic infeed/outfeed - Fixed sanding shoe for solid wood frame sanding - Brush roller driven by the sanding aggregate - Automatic centering of feed conveyor - Feed conveyor with high-quality rubber perforated belt and automatic belt centering - Pneumatic belt tensioning with automatic length compensation - Non-contact electronic belt oscillation - Low-wear disk brake system for instant sanding belt stop with pressure monitor - Motor-driven thickness adjustment with digital display - Infeed workpiece thickness limiter - Semi-automatic workpiece thickness adjustment - Fourfold grit/thickness compensation for contact roller. Special accessories: workpiece thickness gauge.

Gamybos metai: 2024, Sąlyga: naujas, For sale: New WLO 50 kW Warm Air Heater, Workshop Stove, Wood Burner Technical Specifications of the Heater: - Rated heating output: 44.50 kW - Maximum heating output: 50.00 kW / suitable for approx. 300 m² - Included: Axial fan, speed: 1350 rpm, capacity: 5060 m³/h - Supplied with: Operator’s manual - Innovative air jacket design completely encloses the stove for maximum efficiency - Robust construction: made entirely from P265GH and 16Mo3 certified boiler plates, thicknesses #6 mm and #10 mm - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 330 kg - Gross weight: 340 kg - Fire chamber lining: 40 fireclay bricks - Two removable large cast iron grates: 300 x 200 mm - Coated with certified heat-resistant paint for corrosion protection and enhanced appearance - Solid structure - Large combustion chamber - Wide loading door - User manual included - Efficiency: 75.00% Nwjdpfx Asixup Asghjp - CO emissions at 13% O₂: 1.20 m - Recommended fuel: Seasoned hardwood with moisture content ≤20% * mg/Nm³, briquettes; coal only as an additive up to 10% Safety and Certification: - CE marking: YES / indicated on the nameplate - Standard compliance: EN13240:2006 - Meets BImSchV Stage 2: Yes Dimensions: - External dimensions: Total width: 580 mm x total depth: 1290 mm x total height: 1310 mm - Firebox dimensions: Width: 480 mm x depth: 930 mm x height: 680 mm - Upper door (3 and 4 mm plate): Width: 390 mm x height: 330 mm - Middle door (3 and 4 mm plate): Width: 390 mm x height: 150 mm - Lower door (3 and 4 mm plate): Width: 390 mm x height: 150 mm - Top loading opening: Width: 315 mm x height: 310 mm - Middle/lower loading opening: Width: 315 mm x height: 130 mm - Cast iron grate: Width: 210 mm x depth: 300 mm - Hot air outlet diameter: Ø 150 mm - Exhaust outlet diameter: Ø 150 mm - Leg height: 140 mm Fan Technical Data: - Type: Axial fan - Material: Steel (impeller + housing) - Diameter: Ø 450 mm - Power supply: 230V / 50Hz - Motor: 4-pole - Current consumption: 0.82 A - Speed: 1350 rpm - Airflow: 5060 m³/h - Safety: CE marking + protective mesh