Karšto oro krosnelė, dirbtuvių krosnelė, salės šildytuvas

Fabbri F85 c.v.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet Djdpfxsvz Hq Ho Ag Iecl The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, veikimo valandos: 140 h, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 3 050 mm, padavimo eiga Y ašimi: 1 250 mm, padavimo ilgis Z ašis: 80 mm, įėjimo dažnis: 50 Hz, įėjimo srovė: 29 A, darbinis plotis: 3 050 mm, Wir bieten Ihnen diese sehr gute HOMAG DRILLTEQ V-500 Durchlaufbohrmaschine, Baujahr 2021, an. Arbeitsbereich X: 3.050 mm Arbeitsbereich Y: 1.250 mm Arbeitsbereich Z: 80 mm Anzahl Frässpindeln: 1 Hauptmotorleistung: 10 kW Djdpfjylp Slsx Ag Iecl Maximale Drehzahl: 24.000 U/min Werkzeugaufnahmesystem: HSK-F63 Werkzeugwechselplätze: 4 Vertikale Bohrspindeln: 15 Horizontale Bohrspindeln in X: 6 Horizontale Bohrspindeln in Y: 4 Nutenfräse: um 90° schwenkbar Vertikale Arbeitsfläche: Maschinentisch Durchlauftechnik Spezielle Werkstückspannvorrichtung: Klemmgreifer Barcode-Scanner Sicherheitsvorrichtung: Geschlossene Kabine Steuerung: Homag powerTouch, HOMAG POWER CONTROL Software: HOMAG WOODWOP 7.2 Konformitätskennzeichnung: CE-Kennzeichnung Kategorie: Bearbeitungszentrum Typenbezeichnung: DRILLTEQ V-500 Untertyp: OPTIMAT BHX200 Maschinennummer: 0-250-73-7195 Schaltplan: 0-250-73-7195 Versorgungsspannung: 400Y/230 V Neutralleiter: ja Phasen: 3 Frequenz: 50 Hz Maximaler Betriebsstrom (Vollast): 29 A Absicherung: 35 A Steuerspannung: 24 V Bei Fragen oder für weitere Informationen senden Sie uns gerne eine Nachricht oder rufen Sie uns an.

Gamybos metai: 2022, būklė: naujas, Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granulate, etc. Aluminium angled conveyor belt including substructure Horizontal section: 2,500 mm (customizable) Inclined section: 4,000 mm (customizable) Angle at the bend is freely and infinitely adjustable Feed height: horizontal (customizable) Discharge height: individually adjustable Design: height-adjustable (mobile) Djdpeilg U Esfx Ag Iecl Conveyor belt width: 600 mm (customizable) We supply our conveyor belts in PVC, PU, felt, or rubber. PU conveyor belt including cleats and wave edge Drive: 1.1 kW motor (customizable), speed approx. 0.3 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive and components ready for connection, motor control optional 8x adjustable machine feet for leveling Wave edge: 50x30 mm T-40 cleats with 300 mm spacing 2-ply for enhanced cross stability We always have various systems of this type in stock. The delivery time for a custom-made system is currently around 2–3 weeks, depending on manufacturing effort. Our core competence is to provide customers exactly what they really need. We work with our customers to develop tailor-made, individual solutions and supply suitable systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator.

Būklė: naudotas, Gamybos metai: 2022, Įrenginys yra puikios būklės ir naudojamas nedidelėje medienos apdirbimo dirbtuvėje. Dodpfsy S U Dusx Ag Iscl

Būklė: naujas, Gamybos metai: 2026, Construction size: 3 Nominal thermal output: 87 kW -- BImSchV Level 2 and CE compliant -- Dododlhbpopfx Ag Ijcl Combustion chamber fully lined with fireclay For rooms up to: 2,200 m³ (according to DIN) Fuel type: firewood, chipboard, wood chips, briquettes Fuel consumption: 25 - 30 kg/h Fan air output, free-blowing: 6,000 m³/h Blow-out opening: Ø 500 mm Flue pipe connection: Ø 200 mm Weight: 1,250 kg PLC control cabinet: 380 Volt

Būklė: naujas, Gamybos metai: 2026, Construction size: 4 Rated heat output: 116 kW -- BImSchV Stage 2 and CE compliant -- Djdpfx Agjdlhcds Iscl Combustion chamber fully lined with fireclay For spaces up to: 2,900 m³ (according to DIN) Fuel types: Firewood, chipboard, wood chips, briquetted wood chips Fuel consumption: 30 - 35 kg/h Blower air capacity, free blowing: 7,500 m³/h Outlet opening: Ø 600 mm Flue pipe connection: Ø 220 mm Weight: 1,550 kg PLC control cabinet: 380 Volt

Būklė: reikia remonto (naudotas), Gamybos metai: 2016, veikimo valandos: 90 h, Funkcionalumas: ribota funkcionalumas, kuro tipas: dyzelinas, galia: 44 kW (59,82 AG), nominali galia: 44 kW (59,82 AG), nuolatinė galia: 44 kW (59,82 AG), nepertraukiama (akivaizdi) galia: 55 kVA, Parduodamas dyzelinis generatorius ETT-55E (55 kVA) Būklė: naudotas, neveikia aušinimo pompa, patenka tepalas į variklį, reikia keisti tepalo pompa. Daugiau techniškai tvarkingas. Galime užkurti. Papildomai pridedamas naujas kuro siurblys. Gamintojas: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkija. Patikimas trijų fazių dyzelinis generatorius su automatinio valdymo pultu ir garso izoliaciniu gaubtu. Tinkamas tiek atsarginiam elektros tiekimui, tiek nuolatiniam naudojimui pramonėje ar statybose. Techniniai parametrai: Modelis: ETT-55E Darbo laikas: 90 val. Galia (Standby): 55 kVA / 44 kW Galia (Prime): 50 kVA / 40 kW Variklis: Ricardo K4100ZDS (dyzelinis, 4 cilindrų, vandens aušinimo) Generatorius (alternatorius): WHI224D, brushless, su automatiniu įtampos reguliavimu (AVR) Įtampa / Dažnis: 400 / 230 V – 50 Hz Srovė: 79 A Galios faktorius (cosφ): 0,8 Apsisukimai: 1500 aps./min Dsdpfxoxlngae Ag Ijcl Aušinimas: vandeniu Degalų sąnaudos: ~10 L/val. (esant 100 % apkrovai) Kuro bako talpa: 260 L (iki 8 val. nepertraukiamo darbo) Matmenys (LxWxH): 2250 × 1000 × 1500 mm Svoris: 1100 kg Pagaminimo metai: 2016 Kilmės šalis: Turkija Valdymas ir įranga: Automatinis DATKOM DKG309 valdymo modulis Avarinio stabdymo mygtukas Kuro lygio, alyvos slėgio, temperatūros ir įtampos jutikliai Akumuliatoriaus įkrovimo sistema Automatinis perjungimo (transfer) skydas – tinklo / generatoriaus valdymui Apsauga nuo viršįtampio, perkrovos ir žemo alyvos slėgio Garso izoliacinis gaubtas – sumažintas triukšmo lygis Rankinis arba automatinis veikimo režimas Paskirtis: Generatorius tinkamas: pramoninėms įmonėms, sandėliams, gamybos cechams; statybos aikštelėms ir mobilioms darbo vietoms; atsarginiam elektros tiekimui viešbučiams, ligoninėms, biurų pastatams ar ūkiams. Patikimas sprendimas, kai reikalingas stabilus elektros tiekimas be pertrūkių. Jei turėsite daugiau klausimų – mielai atsakysime.

Būklė: beveik kaip naujas (naudotas), For sale is a used Felder surface and thickness planer AD7-41 with a planing height of up to 230 mm. The machine is currently in use as a demonstration model in our showroom and is therefore in mint condition. Technical data: Dodpfx Aow Hckrsg Iecl - 4-knife cutter block - Planing width: 410 mm - Surface table length: 2000 mm - Max. thicknessing height: 230 mm - Electric thickness adjustment PowerDrive - Extraction port Ø 120 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! For more information call 06244-20299. Related terms: surface planer, thickness planer, planer, jointer, thicknesser Reference: R-A0117

Būklė: naudotas, Gamybos metai: 2009, Used machine Dedpfxsv R Nk Uj Ag Iocl Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch-screen Industrial conveyor chain 1 1/4" Joint trimming unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunctional profile trimming units CR-202 (FAST system, 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with profile trimming unit (depending on profile): 35-65 mm Edge thickness, coil: 0.4-3 mm Edge thickness, strip material: 0.4-22 mm (depending on unit) Min. workpiece length: 140 mm Min. workpiece width (at length 140 mm): 85 mm Min. workpiece width (at length 250 mm): 50 mm Feed speeds: 10-14-18-20 m/min Central extraction connection: 200 mm Extraction connection (edge banding): 80 mm Extraction connection (joint trimming): 120 mm Glue tank capacity: approx. 3 kg Heat-up time at 1/2 fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine offered without the workpiece return device shown in the photos Availability: short-term Location: Flörsheim

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger utility spaces such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no extended heat-up phases and can quickly warm up joinery, carpentry, or other production facilities. Solid wood and its by-products—e.g., solid wood board offcuts, chips, sawdust, pellets, or briquettes—serve as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety provisions of Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of required emission values according to the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m³/h - Firebox depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at rated load: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heat coverage area: approx. 300 m² - Space requirement: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg Dcsdpfx Aevz Hq Tsg Iel - Flue connection diameter: 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 291°C - Hot air outlet port: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connections for the air outlet are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.