Hogger pirkti naudotą (19)

Sąlyga: geras (naudotas), Gesamtmaße: 3300 x 2600 x 2450 mm; Kesselinhalt: 330 l; Stromversorgung: 400 V, 50 Hz; Gesamtleistung: 115 kW / 150 A; Messergeschwindigkeiten: 550 / 975 / 1950 / 2500 / 3200 / 4100 U/min; Hauptantrieb: 103 kW Gleichstrommotor; Kesselgeschwindigkeiten: 4 / 8 / 12 / 16 U/min; Kesselantrieb: 1,2 kW; Mischgeschwindigkeiten: -65 / -130 U/min mit Umkehrfunktion; Hydraulikanlage: 5,5 kW; Ladegerät; Entlader; Vakuumpumpe Busch 250 m³/h, 5,5 kW; Hjdpfsl Dmpaex Af Ijng Gewicht: 5600 kg.

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Alpina modelis PBV 330, pjaustytuvo talpa 330 litrų, nerūdijančio plieno dubuo, keltuvas mėsos vežimėliams, labai geros būklės, paruoštas vakuumui. Matmenys: 300 x 220 x 160 cm Hnodpfx Asxmh Sljf Ieg

Sąlyga: paruoštas naudoti (naudotas), Now available! Complete Dumpling/Knödel Production Line In very good condition. The production line has a capacity of 1200 kg per hour. For further specifications of this line, please see the attachments. The line can be inspected in Stavenhagen, Germany. The installation is still fully operational and connected to power, enabling demonstration. The line is complete, starting with storage of potato flakes. These are then mixed in the correct ratio. The system can also process other raw materials, such as bread dough or other ingredients. An additional big bag station is available for this purpose. After mixing, the product is weighed and further mixed before being conveyed to the Rheon forming machines. The Rheon machines form the product; if desired, a filling can also be incorporated. The product then moves to the breading drum and subsequently to the cryogenic freezer, where the exterior is hardened to ensure good packability. After freezing, the product is weighed by a multihead weigher and packed in doypack packaging. It then passes through the pasteurization tunnel, which ensures an extended shelf life. Afterward, the packaging is blown dry. Hnodpfx Afex H Saps Ijg Finally, weight and metal detection take place, after which the products are automatically packed into boxes by a repacking machine. The boxes are automatically stacked on pallets, making the products ready for transport. Multiple photos available (please contact us for more information)

Sąlyga: labai geros būklės (naudotas), Hoegger FS201A bulvių trintuvė. Apytikriai 1 m x 1,4 m x 1,75 m su įrankių vežimėliu ir visomis dalimis. Vežimėlio dydis: 800 mm pločio x 650 mm x 1,4 m aukščio. Hjdpfjxphvpex Af Ijng

Sąlyga: naujas, Infeed opening: 600 x 800 mm Motor power: 15 kW Hopper volume: 0.6 m³ Rotor diameter: 260 mm Dimensions (L/W/H): 1,805 x 1,118 x 1,646 mm Weight: approx. 1,100 kg Hoku single-shaft shredder H 600 Compact, Robust, High Throughput ----- Technical Manufacturer Description: Hodpfsx Iwfmex Af Iong The H600 high-performance shredder, with its flexible application options, is capable of processing all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips, achieving significant volume reduction of bulky materials. The hydraulically driven pusher feeds the wood waste to be shredded into the cutting area of the rotor, automatically and load-dependently controlled. The high-performance E-rotor made of solid steel has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive, and four-way reversible knives / cutting crowns are positioned in milled knife pockets on special knife holders. This highly efficient system guarantees high throughput, low energy consumption, and optimal discharge of the shredded material by minimizing the cutting gap between counter knife and rotor. Chip size (10 - 60 mm) depending on screen perforation. Technical Specifications: Hopper opening: 600 x 800 mm Hopper volume: 0.6 m³ Working width of rotor: 600 mm Rotor diameter: 260 mm Drive power: 15 kW Rotor speed: 90 rpm Number of knives: 14 pcs + 2 pcs Type & size of knives: concave/40 x 40 mm, cutting crowns concave/30 x 30 mm, cleaning knives Screen perforation: 10-60 mm Connection rating: 400 V +/- 5% / 50 Hz Included: - Control cabinet (Rittal) with 5m cable - Electric control (Siemens PLC) - Star-delta start - Rubber vibration mounts - E-rotor with milled knife pockets - Gear end switch - 1st knife row - Hold-down device on pusher for long and large pieces - Large 40 x 40 mm knives for optimal material feeding - Very robust gearbox - Special cleaning knives to prevent lateral jamming ----- Price of the above-mentioned machine available on request! ----- Prices plus packaging & shipping, plus statutory VAT. (Technical data according to manufacturer—subject to confirmation!)

Sąlyga: naudotas, Feed opening 800x600 mm Motor power 18.5 kW Hopper volume 0.6 m³ Rotor diameter 252 mm Operating hours 1,741 h Machine dimensions (L/W/H) 1650x1200x1595 mm Loading dimensions (L x W x H) 1650x1200x1800 mm Weight 1,300 kg WEIMA Shredder WL 4, machine fully inspected ----- Note: The machine has been fully inspected by us and runs flawlessly, see video. Knives and pusher plate were already replaced by the previous owner. The V-belt was replaced by us during inspection. 1,741 operating hours stated. Description: The WEIMA high-performance shredders, with their flexible range of applications, can process all kinds of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer scraps, etc.) into fuel chips and achieve enormous volume reduction of material, especially with bulky items. Functionality: The machine is equipped with a large feed hopper and can be loaded via conveyor belt or manually. The hopper can be customized to individual needs and ensures continuous and cost-effective material feeding without the need for manual intervention. The hydraulically controlled pusher automatically and load-dependently feeds the wood waste to be shredded into the rotor's cutting area. The internal pusher guides are made of highly wear-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are mounted in a floating (cardanic) manner to prevent lateral forces on the piston seals. Hnedpfx Ajvvx Dzof Iog The patented and profiled V-rotor, made from solid steel, has a diameter of 252 mm and operates at a rotor speed of 80–120 rpm. The concave-ground, aggressive, and four-times reversible knives/cutting crowns sit in milled knife pockets on special knife holders. This patented system guarantees, through its precise reduction of the cutting gap between counter knife and rotor, high throughput, low energy consumption, and optimal discharge of the shredded material. The screen mounted under the rotor determines the chip size (10–100 mm). On request, a hydraulically opening screen basket is also available. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox, mounted on one side of the rotor shaft. Technical Data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper volume: 0.6 m³ Effective rotor width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Screen diameter: 15 mm Coating: WEIMA standard RAL 2002 / 7016 Power supply: 400 V +/- 5 % / 50 Hz Weight: approx. 1,300 kg Includes: Electric control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Concave-ground reversible cutting crowns (40 x 40 mm) Star-delta starter Vibration-damping base frame V-rotor (patented) with profiled milled knife pockets (Technical data per manufacturer – no guarantee!)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2006, Šis HOMAG KFL 526 / C buvo pagamintas 2006 m. Tai tvirtas dvipusis kraštų apipjovimo įrenginys, skirtas apdirbti nuo 12 iki 40 mm storio ruošinius ir iki 2500 x 1200 mm dydžio ruošinius. Funkcijos: klijavimo įrenginys, profilių apipjaustymas ir apdailos įrenginys, skirtas tiksliai kraštų apdailai. Idealiai tinka efektyviam briaunų apklijavimui iki 35 m/min greičiu. Susisiekite su mumis ir gaukite daugiau informacijos apie šią mašiną. Papildoma įranga • Atskyrimo medžiagos purškimo įtaisas viršuje/apačioje / Dvigubas išilginis/skersinis purškimo įrenginys: 6,6 kW su elektropneumatiniu valdymu / Klijavimo įrenginys A3 - 2 ritinėliai / Profilio apipjaustymo įrenginys FF12 viršuje/apačioje su 12000 aps./min. varikliais / Apdailos įrenginys FA11 viršuje/apačioje / Tolygiai reguliuojami kumšteliai su maksimalia kumštelio iškyša 25 mm / Standartinis apipjaustymo įrenginys SF20 6,6 kW / Grubaus apipjaustymo įrenginys 0,55 kW • PUR Nordson lydymo stotis / įrankių rinkinys / siurbimo vamzdelis Hedpox U Uzrjfx Af Iong Mašinos privalumai Techninės mašinos privalumai • Ruošinio storis: 12–40 mm / minimalus ruošinio dydis (ilgis x plotis): 250 x 240 mm / maksimalus ruošinio dydis (ilgis x plotis): 2500 x 1200 mm / maksimalus ruošinio svoris: 50 kg • Volelio medžiagos krašto storis: 0,4–3 mm / didžiausias krašto skerspjūvis (plastikas): 135 mm² / didžiausias krašto skerspjūvis (faneros): 100 mm² / didžiausias volelio skersmuo: 830 mm • Išilginis apdorojimo greitis: iki 35 m/min. Plonoms briaunoms iki 0,6 mm / iki 30 m/min. Storoms briaunoms iki 3 mm • Kryžminio apdorojimo greitis: iki 30 m/min. Plokščių dydžio nustatymui / iki 20 m/min. Kraštų apdirbimui • Minimalus ruošinio tarpas: 500 mm

Sąlyga: naudotas, Gamybos metai: 2017, Serijos numeris: 561706xxxx Norėdami gauti daugiau informacijos, kreipkitės į ATS Norway. Prašome užklausdami nurodyti nuorodos numerį: 21791 Specifikacijos: 2017 metų modelis 1646 darbo valandų Svoris: 2000 kg Tinka medienos rąstams iki 19 cm skersmens Apie 50 AG Kubota variklis 18,5 kW Kėlimo ir nuleidimo funkcija Paruoštas pristatymui Aprašymas: Savininko teigimu, Jensen A540 Spider medienos smulkintuvas veikia puikiai. Jame yra kėlimo ir nuleidimo funkcija, leidžianti lengvai manevruoti nelygiame paviršiuje. Apdoroja rąstus iki 19 cm skersmens. Hodjxwkmgspfx Af Iong Mašina paruošta pristatymui. Savosios masė: 2000 kg Modelis: A540 spider skiedrų smulkintuvas su hidrauline kėlimo ir nuleidimo funkcija.

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (First machine in a production line) Edge banding material (thickness min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 270 - 1200 Control / Software: SINITRA Feed speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and noise protection cabin Side adjustment of aggregate carrier: manual FORMAT PROCESSING (each side): 2 x Hogger DT 10 (5.8 kW x 2) Space for jointing unit FS Jointing aggregate ES30 + ER30 (5 kW x 2), 0° - 90° Universal milling unit Softforming SF 10 (2 x 2.4 kW), 0° - 45° Spraying device (for liquid non-stick agent) EDGE BANDING SECTION (each side): Edging unit (Hot-melt glue + pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Preheating RP 10 Edge pressure zone (CNC controlled) Pressure roller track (revolver) for straight and shaped (softforming) edges Soft PF40 (4 positions), 800 mm (Shears CI10+CS10+RL10) - Edge magazine for coils (no. 6 positions) Milling unit RS 10 (1.3 kW x 2) Milling unit Softforming RF 10 / SF (0.65 kW x 2) Multi-profile milling unit RF 30 (0.65 kW x 2) Universal milling unit for grooving/rabbetting and profiling FB 30 (4.5 kW x 2), 0 - 90° Multi-profile scraper unit RB 30 Hjdot N Ix Repfx Af Ijng Flat scraper unit RC 05 / Soft Spray units (for polishing fluid) + buffing unit SZ 30 (0.37 kW x 2)

Gamybos metai: 2005, Sąlyga: naudotas, Universal machine for eroding, grinding, and polishing various PCD tools up to 400 mm in diameter and 400 mm in length, suitable for production use. Accessories: - Full enclosure - Curve management software - P-System software for shear milling cutters - Software for shank end mills (207/208) - Software for disc-shaped workpieces, face side (221/222/223/224) - Software for profiled workpieces (233/234/239/240) - Software for roughing cutters, profiled roughing cutters (255/256/257/258/260/261/262/263) - Software for disc-shaped workpieces (264/265) - Software for shank and jointing cutters (267/268/277/278) - Software for step tools (271) - Software for slitting saws (299) - Software for flat tooth saws (301) - Software for single-sided saws with chamfer (302/303) - Software for alternate tooth saws (304) - Software for trapezoidal tooth saws (309) - Software for flat-roof tooth saws (310) - Software for flat-trapezoidal tooth saws (311) - Software for alternate tooth saws with chamfer (312) - Software for shank and jointing cutters (7/8) - Software for profiled shank and jointing cutters (33/34) - Software for roughing cutters, profiled roughing cutters (53/54/55/56/57/58) Hnsdpfx Afjw S I Dgo Ijg - Software for disc-shaped workpieces (64/65) - Software for shank and jointing cutters (67/68/77/78) - Compensation software (90) - Software for flat tooth saws (101) - Software for single-sided saws with chamfer (102/103) - Software for alternate tooth saws (104) - Software for trapezoidal tooth saws (109) - Software for flat-roof tooth saws (110) - Software for flat-trapezoidal tooth saws (111) - Software for alternate tooth saws with chamfer (112) - Software for polishing profiled roughing cutters (757/758/760/761) - Dielectric filtration system - Automatic fire extinguishing system DIN 14497 - Standard programs for measuring, eroding, etc. - Software program for chamfering workpiece cutting edges, automatic diagnostics (machine operating data program with on-screen text output) - Software for shear milling cutters

Sąlyga: naudotas, Chipping rundvirke: 100–150 m³/t Flising av småved og avfall: 50–100 m³/t Vekt: 3165 kg Hnjdpfxshclffs Af Ieg Maks. stokkdiameter: 254 mm Söderhamn Eriksson 670-56 CC flishogger med elektrisk motor. Söderhamn Eriksson 670-56-flishoggeren er beregnet for produksjon av flis til tremasse, fiberplater og sponplater. Både rundvirke og sagbruksavfall kan benyttes som råstoff. Flishogger 670-56 mater horisontalt, i en vinkel på 37,5 grader mot fiberretningen. Flis av jevn og høy kvalitet kan enten ledes ut i bunnen eller blåses rett opp. Bli en av de sagbruksbedriftene som forvalter ressursene sine på en smart måte.

Sąlyga: naudotas, Double-end profiler, edge processing machine, scoring motor, cutting motor, spindle motor, milling motor - Manufacturer: Peske, milling motor type VS 31.09-4 - Power: 0.37 kW, 8540 rpm at 300 Hz Hnjdob A Tcwjpfx Af Iog - Voltage: 165 Volts - Tool holder: collet chuck - Tool diameter: Ø 8 mm - Quantity: 2 motors available - Price: per piece - Dimensions: 260/60/H140 mm / 255/60/H155 mm - Weight: 3.5 kg each

Sąlyga: naudotas, Gamybos metai: 2013, Numerical control PC Office with Widge Plus software Machine suitable for 1st and 2nd panel pass Motorized mobile support arm opening via N.C., 3200 mm Panel width min - max: 215 - 3200 mm Panel height min - max: 10 - 60 mm Edge thickness in roll, min - max (PVC-ABS): 0.3 - 3 mm Continuously adjustable feed speed: 10 - 40 m/min Motorized pressure belt Support conveyor with retractable pin Pin heights: 12 - 18 - 25 mm Distance between retractable pins: 500 / 400 mm Working units mounted on NC-motorized upper tables Squaring unit consisting of (each side): - Anti-adhesive group - Time-controlled splinter protection system - Double pre-milling unit Edging unit consisting of (each side): - Gluing unit with premelter for PUR adhesive and premelter for EVA adhesive - Edge pressure rollers electronically controlled by N.C. - Edge tape magazine with 6 stations - Trimming unit with two motors - Overlapping end cutting unit - Staggered finishing group with two electronically NC-controlled motors - Corner rounding unit with 4 motors Hnedok Egvdjpfx Af Ijg - 0-90° tiltable planing unit, electronically controlled by CN (mobile support arm) - 0-90° tiltable milling unit + double stacked milling spindle (fixed support arm) - Anti-adhesive groups - Edge scraper unit - Glue scraper group - Brushing group - Phon group

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and soundproof cabin Manual side adjustment of unit carrier Cam pitch (mm): 500 SIZING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW) 2 x hoggers DT 10 (5.8 + 5.8 kW) Spraying device (for liquid anti-adhesive) Hnedohvahhepfx Af Ijg EDGEBANDING SECTION (for each side): Gluing unit (hot-melt glue + premelter) SP30 (High Melt + Edge Control EC 40) Edge pressure section (CNC controlled). Edge magazine for rolls (No. 6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28 m/min, 0 - 25°. PNEUMATIC Multi-profile milling unit (CNC controlled) RF 40 (1 kW x 2) 0 - 25° Multifunction unit (radius and form milling unit) AR 80 (0.65 kW x 2) 25 m/min, ROTAX motors with automatic tool changer (tools) 2 universal milling units for grooving, rebating, and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraper unit (CNC controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Sąlyga: naudotas, Double-end profiler, edge processing machine, scribing motor, cutting motor, milling motor, spindle motor - Manufacturer: Perske, milling motor type DVMS 903/2 - Power: 0.4 kW, 12,000 rpm at 200 Hz - Voltage: 133 Volts Hnedpfx Asmdygijf Iog - Shaft mounting: Ø 30 x 32 mm - Tool: Ø 70 x 20 mm / indexable insert cutter - Quantity: 1 unit available - Dimensions: 250/59/H140 mm - Weight: 3.8 kg

Sąlyga: labai geros būklės (naudotas), Double-sided – First machine in a processing line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness with rolls (min/max) mm 0.3 – 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system: PC Base Windows / Software PC / SINTRA Feed speed (adjustable) m/min 10 – 40 (C.N. INVERTER) FORMAT PROCESSING (per side): Spray unit (for liquid release agent) No. 2 hoggers DT 10 (5.8 kW x 2) Empty space EDGEBANDING SECTION (per side): 1st gluing unit (Hot Melt + premelter) SP 30 (High Melt + Edge Control EC 40) 2nd gluing unit (premelter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 universal milling unit for grooving/rebating/profiling EB 60 (1 x 5 kW) - ISO 30 motor Multi-profile scraper unit (CNC controlled) RB 40 Flat scraper unit RC 20 Hjdpfx Afsu Rc Hyo Ijng Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Sąlyga: naudotas, Double-end profiler, edge processing machine, scribing motor, cutting motor, milling motor, spindle motor - Power: 0.4 kW 12,000 rpm at 200 Hz - Voltage: 133 Volts - Shaft diameter: Ø 20 mm - Tool: Ø 70 x 20 mm - Fitted with indexable insert cutter - Quantity: 1 unit available Hsdpfsb A Tctsx Af Ijng - Dimensions: 285/60/H170 mm - Weight: 5 kg

Sąlyga: labai geros būklės (naudotas), 4-sided formatting and edge-banding line Panel dimensions: min. 195 x 250 x 60 mm / max. 1200 x 2500 x 60 mm The line consists of the following machines: KZ0400a) "HOMAG" infeed table, model TBL 100/25/12/S with motorized rollers Feed speed (adjustable): 7–40 m/min Hnsdeiztxyspfx Af Iog KZ0400b) 1st double-sided formatting and edge-banding machine "HOMAG" model KFL 325/M1/C Feed speed (adjustable): 15–40 m/min with PC 22 FORMATTING SECTION: Double milling unit KD10 (2 x 6.6 kW) + Gluing unit A3 with dual roll magazine EDGE BANDING SECTION: Top and bottom flush trimming unit BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), groove milling unit UF11 for rabbeting and grooving (4 kW), free space, profile scraper unit PN10, finishing unit (flat scrapers + smoothing unit) KZ0400c) Rotating station (90° LONGITUDINAL–TRANSVERSE) "HOMAG" model TDL 310 / 25 / 12 (longitudinal to transverse) Feed speed (adjustable): 20–60 m/min KZ0400d) 2nd double-sided formatting and edge-banding machine "HOMAG" model KFL 326/M2/C Feed speed (adjustable): 15–32 m/min with PC 22 FORMATTING SECTION: Pre-milling cutter (1 x 4.5 kW), double milling unit KD10 (2 x 6.6 kW) + Gluing unit A3 with dual roll magazine EDGE BANDING SECTION: Cross-cut unit HL 84 (2 x 0.22 kW), top and bottom flush trimming unit BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), contour trimming (copying) unit FF32 (4 x 0.4 kW), free space, profile scraper unit PN10, finishing unit (flat scrapers + smoothing unit) MINIMUM EDGE LENGTH 70 MM (workpiece thickness for narrow parts max. 25 mm, edge thickness max. 2 mm, cycle rate: max. 20 pcs/min, feed speed max. 20 m/min).

Sąlyga: naudotas, Double-end profiler, edge processing machine, scoring motor, cutting motor, spindle motor, milling motor Hsdpol Dvuasfx Af Isng - Manufacturer: Perske, milling motor for edge processing machines - Power: 0.15 kW, 11,160 rpm at 200 Hz - Voltage: 133 volts - Shaft Mount: Ø 15 x 17 mm / M12 - Dimensions: 190/70/H85 mm - Weight: 1.8 kg